How to make an original stand from a plastic card, paper clip or any other material at hand + useful tips and ready-made options for implementation

Home House and cottage Do it yourself

The stand is a useful and convenient thing in everyday life. For example, phones or tablets, which have become an integral part of our daily lives, are a little inconvenient to use in a hospital setting. If you do not have a branded or suitable case that can secure the gadget in an inclined position, then you will have to hold it with your hands. This is inconvenient when watching a movie for a long time, while eating or reading for a long time.

The best solution to this problem may be to purchase a stand specifically designed for this purpose. But sometimes we need it right now, or we simply feel sorry for the money for a seemingly temporary thing. In this case, you can make a stand yourself from available materials. It does not take a lot of time! A couple of minutes and you can comfortably sit in front of the screen of your gadget, while freeing your hands.

In this article we will rely primarily on options for phone stands, but they can also be slightly modernized and used for tablets, books, even for pictures or plates. It all depends only on your imagination. But if she is sleeping, then there is nothing wrong with it. The options proposed in the article are discussed in detail, and it will not be difficult for you to slightly increase the dimensions specifically for the thing for which you are making a stand.

Handy materials to help

You can make a stand yourself from scrap materials. Almost any material you have at home is suitable for this. It could be:

• wire
• cardboard
• cardboard box
• fabric and padding
• bottle
• tree
• paper
• pencils
• constructor
• stationery holders
• unnecessary plastic cards
• old cassette player

Only your imagination can limit your choice. Of course, the stores offer a huge selection of products in this category. However, making the holder yourself has a number of undeniable advantages:

• Rapidity. Sometimes you need a stand as soon as possible, and there is no time to go to the store to buy it.
• Inexpensive or free. You can make a holder from what you already have in your home.
• Originality. With your own hands you will create a truly unique product.

Phone stand made from pencils

In order to assemble this structure, you will need:

• 6 pencils
• 4 rubber bands

Despite the intricate appearance, this design is very easy to assemble. The idea is that two pencils are held together at the ends with an elastic band, and the third pencil is inserted between the turns of the rubber band. The result is a geometric figure - a tetrahedron. If you still have questions about how to make this version of the stand, then use the example below.

The picture clearly shows how the pencils are held together.

To avoid slipping and make the stand more stable, use pencils with erasers at the ends.

Photo frame

When making crafts, they use ready-made drawings. You can take the idea as a basis and add new details. The result will be an original item. If a person is interested in how to make a craft, a detailed master class will help get the job done.

To implement the idea, a pattern is applied to the surface of the plywood. The template is carefully outlined with a simple pencil. Then the workpiece is cut out with a jigsaw and the place for the photograph is prepared.

The ends are polished. Then the product is cleaned of dust and varnish is applied to it. Cardboard is attached to the back of the frame to hold the photo. These items are hung on the walls, placed on a shelf or bedside table.

How to treat the surface → Room decoration → How to choose the right paint → Surface treatment technologies → Leveling and finishing the walls → Selecting and applying a primer → Removal from the surface → Stretch ceilings and technologies → Reviews and testimonials

Cardboard phone or tablet stand

Cardboard is an excellent material that is widely used for various homemade “things”. Probably, many people have a cardboard box or an unnecessary sheet of cardboard at home. It’s worth trying to use it to create a stand.

To do this you will need:

• cardboard
• scissors

From a sheet of cardboard folded in half, cut a strip measuring 10 by 10 cm. Then draw the figure shown in the figure on it and cut it along the contour.

You will get a comfortable and stable stand that you can carry with you.

This holder option can be used for a tablet or book. The essence of manufacturing is the same, you just need to adjust the part to the size of your gadget, as shown in the figure.

It is necessary to use cardboard that bends well so that the stand does not “open up”.

It is important to understand that a cardboard stand is not necessarily a sloppy brown structure. It can be stylish, comfortable and beautiful. You just need to change the shape a little and the result will change dramatically.

Floor flower holder

The floor stand is made in different types, and this is where its convenience lies. Some are delighted by the universal planter for one flower pot, while others prefer to place entire trees on it.

When creating such an element of floor decor, you should be more careful. The plant must feel comfortable, otherwise it will get sick and stop delighting you with its beauty.

It is imperative that the correct width and height dimensions be observed. Therefore, it is better to first develop a template and drawing of a flower stand with your own hands. It will determine which plant will be placed in the floor craft, as well as what size the pots themselves will be.

The height of the tiers should be at least 40 cm, otherwise the plants will not receive a sufficient amount of light, and watering itself will be very inconvenient. Therefore, if the height of the craft is small, it is recommended to choose places for the pots, observing a checkerboard order.

The photo of a stand made by yourself shows how it can turn out in its final form. To create a product for flower plants, you will need metal profiles.

By connecting them with construction fasteners, a wonderful structure is obtained. The top of the stand is made of ordinary wooden boards. For the beauty of the craft, it needs to be painted with plain paint.

• 
  Selling real estate in Vladivostok

• Arranging a small bedroom - 5 ideas for a cozy and comfortable interior

• Interior decoration with flowers

Wire stand for phone or tablet

One of the budget options, made from scrap materials.

During work you will need:

• wire 2-3 mm thick
• pliers
• wire cutters to cut wire

Everything is done as simply as possible: in the right places the wire is bent so that it becomes a holder.

To make the structure more stable, the wire can be connected with a rubber band.

Such a stand can be a real design solution: you can paint it a different color and it will be completely transformed, or you can fill the “voids” with decorative wire curls. This design is suitable for both a phone and a tablet, the only difference is the size of your gadget.

Unusual Lego phone stand

Probably, this version of the stand will especially appeal to teenagers and men. Here you can show your imagination by creating a whole complex for your smartphone with the ability to change position, and maybe even amplify the sound of the speaker, or get by with a minimum of details. The creative process will not only bring pleasure, but also bring benefits.

To make such a design, you will need several parts and a base. The level of inclination can be changed by adding or removing parts. And the position of the gadget is easy to change, also adjusting the design.

Phone stand from an old cassette player

Perhaps someone has an old cassette player lying around at home. It is unlikely that it will ever be useful, and with the advent of disks and electronic media, no one uses cassettes anymore. But still, you can find a use for the cover in which the cassette was located.

To do this, just “turn” the cassette player inside out, tilting the lid back. The hole in which the cassette was held can accommodate a telephone. The advantages of this design are that it is easy to wash and transparent.

The process of working on a product

Initially, we must choose a craft and its diagram, based on photos and drawings. Then we copy the drawings onto plywood.

Work is performed standing. All work with plywood is carried out only in accordance with the markings. If the file goes in the opposite direction, then work must be stopped immediately.

We clean the entire surface of our work of art with sandpaper. And on both sides.

Phone stand made from a plastic bottle

Many of us go on a trip or run errands by train. Often, on trains there is nothing near the sockets where you can securely place your phone. However, the gadget is discharged and needs to be charged. You can simplify this task by using a stand made from a bottle. Its essence lies in the fact that the gadget is placed in the cut off bottom of the bottle, which remains hanging on the plug from the charging device. This way, you don't have to stand nearby and hold the phone in your hands or look for a way to secure it.

To make such a stand holder you will need:

• plastic bottle for shampoo or drink
• scissors

First, wash the bottle to remove any remaining makeup or soda. Then, mark it. The back wall of the stand should become a kind of handle on which the phone holder will hang. The front wall should be high enough so that the phone does not fall over the edge. The next step is to cut out the stand along the office.

To do this, it will be more convenient to use a sharp stationery knife.

Cut a hole in the top of the handle so that it can be attached to the charger plug. You can decorate the stand to suit any taste: using adhesive paper, paints or stickers.

Craft technology

So, the work is carried out in the following sequence.

1. Draw an image of the cake according to the template on a sheet of cardboard, then cut it out.
2. Bend the cardboard along the marked lines using a ruler.
3. Make a cut at the back of the cake to allow it to be closed later.
4. Glue the desired parts of the cake using PVA glue.
5. Decorate the craft with a variety of decorative particles: beads, ribbons, flowers.

You can insert an envelope with wishes or money into the inside of a piece of cake.

• 
  Craft mug: 135 photos and video master class on how to make beautiful crafts with your own hands

• Crafts from spoons - 125 photos and videos, tips and tricks with step-by-step instructions on how to make crafts

• Crafts from cotton pads - 125 photos of beautiful crafts, features and videos of new cotton crafts

Wooden phone or tablet stand

If you want to make an original stand, then one of the good materials for making it is wood. Such a stand will be strong, durable, and can also serve as a good gift for a loved one. It is important to understand that working with wood requires some minimal skills and special tools.

In the process of work, in addition to a wooden block, you may need materials such as:

• saw
• jigsaw
• sandpaper
• wood cutting knives

Be careful and attentive when working with such tools.

Stages of making a stand:

• Process the wooden block by sawing off the excess parts and making a recess at the top in the middle for a phone or tablet.
• Using sandpaper, remove all roughness and splinters from the surface of the future holder.
• You can coat the finished product with varnish or special paint.

Another option for a wooden stand for a phone or tablet is an analogue of its cardboard version. In this case, it is better to use plywood instead of a wooden block.

To do this, make a stencil of the “legs” of the holder and a crossbar that will fasten them together. And transfer it to the plywood. Carefully cut out with a jigsaw and smooth out any unevenness and roughness with sandpaper. Using super glue, connect the legs and the crossbar.

Cook photo frame

A reliable and original design of a photo frame can even be made from salt dough. Creating it is quite simple: pour a glass of flour and half a glass of salt into a bowl, add 100 ml of water (if you want the frame to be colored, dilute the water with food coloring). Knead the dough and season it with 50 ml of vegetable oil.

The dough should “rest” for two hours, after which you can begin modeling. Place the finished product in a preheated oven and bake for two hours, remembering to turn it over.

If you do not color the dough initially, you can paint the finished product after it has completely cooled. A dough photo frame will last longer if you open it with a layer of varnish.

Photo: copytsvet.rf

Photo: shop-myhobby.ru

Photo: mebel-miru.ru

Photo: mamadochka.ru

Photo: mamadochka.ru

DIY stand case for your phone or tablet

The most popular option for a gadget stand is a stand case. You will have to tinker with it a little, but the result is worth it. This option is convenient to take with you when traveling, it is durable and can protect the screen.

To make such a holder you will need:

• facing material, it is best to choose leather
• material for interior cladding
• plain and thick cardboard or rigid material
• elastic band for fastening
• pencil
• ruler
• scissors
• glue
• double sided tape

How to do it?

• Cut the cardboard according to the size of the tablet so that it completely covers it. This is the future basis, the dimensions of which will be basic for all elements.
• Make several folds in the same way that the front of the case will then need to bend to support the tablet.
• Now we take hard material, which will give the case stability. We cut it so that it follows the contour of the workpiece.
• We apply it to the base and make an edging so that it does not interfere with the folds.

• From the inside we treat the case with soft materials, gluing it to the base blank with double-sided tape.
• The next step is fastening for the tablet itself. To do this, we make small holes in the rigid elements for elastic bands that will hold the tablet.

• We glue the finishing material on the outside.

Do this as carefully as possible. The appearance of the product will depend on this.

That's all. The stand is ready! It is convenient and can be used not only as a holder, but also to protect the screen.

Name day gift

On your birthday you always want to receive an unusual gift made by yourself. One of the brightest ideas for such surprises is preparing a piece of cake with sweet wishes.

By making beautiful paper crafts with your own hands, you can convey all the warmth and love to a loved one.

For homemade creativity you will need the following list of tools:

• ruler;
• scissors;
• pencil;
• thick paper (cardboard);
• glue;
• decorative elements (ribbons, beads, flowers, etc.).

All that remains is to find out how to make a beautiful craft.

Stand-bag for tablet or phone

An original and cute version of a gadget stand. It is suitable for girls and can be a cute home accessory.

To make it you will need:

• scissors
• textile
• padding material
• thick cardboard
• thread and needle
• button

Manufacturing process:

• First you need to cut out a template from cardboard according to the size of your gadget.
• Then cut out a rectangle from the fabric twice the size of the resulting template.
• Fold the fabric base in half and mark with stitches a fold 10 cm from the edge.
• Sew the bag, leaving one side unsealed.
• After turning the bag inside out, position it so that the seam runs through the middle and a diamond shape is formed at the end. After ironing it, bend the top corner of the diamond so that it is in the middle and sew. This is shown in more detail in the figure.

• Then insert cardboard into the product and fill the remaining space with padding material.
• Make a seam along the very edge of the template. Folding the edges of the unstitched side, carefully stitch it, leaving an opening for stuffing.
• Make a roll and sew up the hole.

That's all. The product is ready. You can decorate it to your liking, giving it even more charm!

Phone stand made from paper clips

Another interesting and at the same time very simple option. If you have several office clips at home, then feel free to use them!

You will need 2 clamps: one larger and the other smaller. By connecting them together as shown in the figure, in a couple of seconds you will get a phone holder.

This can also be done from two clamps of the same size.

Crafts for the garden

What gardeners don’t do to decorate their plots. Many of them like the beautiful design of flower beds. For this, ordinary plastic bottles are often used, although there should be a lot of them. Moreover, all bottles must be the same size.

To keep the containers strong, sand should be poured into them. You can use ready-made bottles to fence a flower bed and then paint them in the desired color. If the containers are dark in color, they do not need to be painted.

A beautiful fence made from plastic containers is ready!