How to make a hat with your own hands - tips on choosing material, a master class on making and photo ideas

Reads: 6,650

Reading time: 5 min.

no comments

Every needlewoman knows that almost any item in her wardrobe can be decorated with knitted details. For example, you can crochet a flower and attach it to a hat. With the help of such an element, you will revive last year's headdress or create a new, unique image. Such details will look beautiful not only on children's hats, but also on the hats of girls and women. Check out the master class on making such knitted jewelry.

Master class “Paper flower cap”

Karimova Yulia Aleksandrovna
Master class “Paper flower cap”

1) Cut out a strip of thick cardboard, 4 to 5 centimeters wide, around the circumference of the head, and secure the ends of the strip with a stapler. The result is a headband. 2) The headband must be wrapped in corrugated paper in bright colors . 3) Cut 4 more strips to fit the volume of the head and fasten them to the headband at both ends. You will get a hat . 4) Cut out circles with a diameter of 5 to 7 centimeters and give them the shape of petals. 5) We secure each petal individually with a stapler, starting from the rim, rising to the crown. The crown can be made in a different color. Decorate the hat as desired. 6) As a result, we get a beautiful flower hat.

Competition-review “Oh, what a hat!” (photo report) A funny and cheerful hat competition for children was held in our kindergarten. 22 people took part in it. We didn't even expect there to be so many.

Summary of a lesson for older preschoolers “The Magic Hat” using educational games by V. Voskobovich Objectives: • Continue to teach children to compose an object according to a diagram from parts. • Develop skills in techniques for constructing geometric shapes.

GCD notes on paper construction for “May 9” “Dove” Goal: Mastering the technique of folding a paper dove figurine using the origami technique. Develop the eye and coordination of movements. Material:.

Context of the GCD “World of Paper” Purpose. Improve knowledge about different types of paper (napkin, writing, wrapping, drawing, compare their quality characteristics.

Paper construction. Paper construction. “The origins of children’s creativity and talent are at their fingertips. From the finger, figuratively speaking, come the finest.

Designing from paper Designing is a practical activity aimed at obtaining a specific, pre-conceived product. Children's design.

Master class “Cylinder Hat” Hello dear guests! The Graduation Party is approaching. I would like to invite you to see how to make a top hat for boys.

Paper craft “Butterfly” Paper craft “Butterfly” Butterflies are one of the most beautiful insects, the appearance of which reminds us of spring and the long-awaited summer, etc.

My paper crafts The mysterious world of paper transformation. All the sorcerers, wizards, magicians are here. We create fairy tales with our own hands. My “paper fantasy” has begun.

Photo report of a lesson in the second junior group based on the story by N. Nosov “The Living Hat” On July 27, the children of the second junior group “Yagodka” and I got acquainted with the surprisingly interesting story by the writer Nikolai Nosov “The Living Hat.”

Material

Making a hat with your own hands is quite simple, and its pattern can be made from almost any material:

  • paper;
  • cardboard;
  • dry leaves;
  • textile;
  • leather;
  • plastic, etc.

You can also use old clothes for this. There are also many approaches to production; patterns can be sewn, knitted, including using a hook, glued, etc.

Cap “Iris flower” made of crepe paper. Master Class

Galina Shinaeva

Cap “Iris flower” made of crepe paper. Master Class

Dear colleagues, I bring to your attention one of the options for making a hat - an iris flower.

We will need:

Let's get to work.

Cut 4 strips from cardboard:

One measuring 55 cm - 4 cm.

Three stripes 30 cm - 3 cm.

We make a headband from a head that is long in volume.

We attach short strips to the rim.

The result was a hat made of stripes.

From purple crepe (corrugated) paper, cut out 6 rectangles measuring 40 cm - 20 cm.

Fold each rectangle in half and cut out a petal (you get 6 petals).

From cardboard we cut out 6 petals measuring 25 cm - 10 cm.

Place the cardboard petal into the double crepe petal.

We begin to “put on” the frame cap.

First row - fasten three petals,

through one so that they hang down.

Second row - we fix three petals in a checkerboard pattern so that they do not hang down.

From the scraps we make petals like this

and fill the top of the cap with them.

Attach the green strip to the rim.

Cut out two pieces of golden and beige color.

Let's revive our flower.

The iris flower cap is ready.

The cap is a cornflower flower.

For the petals of the cornflower flower, cut strips of 30 cm - 15 cm.

We cut the top edge

We fasten the bottom one with a stapler.

Cap - marigold flower

For petals of peony and marigold flowers

take strips 13cm - 10.

Fold in half and cut out.

We fasten the bottom edge with a stapler, and use these petals to decorate the 3 bottom rows of the hat.

We use these petals to decorate the top of the cap.

Cap - rose

We cut out rose petals from strips of 11cm - 13cm.

Thank you for your attention.

Rain flower made of corrugated paper (master class) Rain flower made of corrugated paper (master class) Dear colleagues and friends, good day. Today I present to your attention.

DIY crepe paper flowers. Master class Hello, dear colleagues! I bring to your attention a master class on making flowers from crepe paper with your own hands. Flowers.

Master class “Flower from colored paper” I would like to present you a master class on making a flower from colored paper, which you can do together with children in preparatory school.

Master class “Paper flower for decorating a hall” PAPER FLOWER To decorate the central wall of a music room, I try to use inexpensive improvised means. I use it often.

Master class “Flower made of corrugated paper” Dear colleagues, I offer you a master class of a flower made of corrugated paper. I made these flowers for our girls. At a matinee dedicated to...

Master class “Hyacinth from crepe paper” Do-it-yourself hyacinths from crepe paper Master class with step-by-step photos Author: Olga Mikhailovna Vlasenko, teacher at MBDOU No. 70 in Shakhty.

Master class from paper “Flower from stripes” Good afternoon, colleagues. I bring to your attention a master class “paper flower”. To work you will need a sheet of colored paper. Draw out.

Master class: paper design “Flower for Mom” Goal: to develop the ability to create gifts with your own hands. Objectives: develop the ability to fold paper; develop fine motor skills of the hands; bring up.

Master class “Flower made of corrugated paper” March 8 is a wonderful and long-awaited holiday. We are all preparing for it very carefully. I already wrote that my girls were at the matinee dedicated to March 8th.

Master class on crafts made from crepe paper “Easter craft” On the eve of the great Orthodox holiday “Easter”, not only our parents prepare for such a great holiday by baking Easter cakes, Easter cakes, and painting.

Crochet pansies

Dial 6 ch. and tie the air chain 12 tbsp. b/n. Change the thread and create 6 vp, fastening them through 1 loop of the previous row - 3 connections in total. Now you knit these chains st. b/n. And now you form 2 ears from 15 s/n columns: 3 half-columns to form a smooth rise, 3 tbsp s/n, 3 tbsp. with 2 double crochets, again 3 tbsp. s/n and 3 half-st.

Continue knitting a row, as if passing over two ears. Again you set the base for 3 ears, with the same number of loops - 15. But now you use 3 tbsp. b/n, and after come st. s/n, also complete with simple columns. Now move on to another thread. Do 3 ch. for lifting and all the ears you make from long double crochets. Pansies are ready! The main thing is to remember to alternate different colors of thread.


Knitting example Another pattern

DIY hat with flowers

You will need a square piece of construction paper for the base of the hat. You need to draw two circles on it: the inner one according to the size of the child’s head and the outer one in accordance with the desired width of the brim of the headdress. Then you need to divide the inner circle into sectors of 45 degrees and make cuts from the center along the lines. Now bend the “teeth” up. The base for the hat is ready.

The next stage is decorating the hat with flowers. Use 3-4 types of colored paper to make flowers and butterflies. It would be good if the flowers were of different shapes and had contrasting centers.

You can also add grass, sun, hearts, stars.

Rose

Today, there are many patterns on how you can knit a beautiful decorative piece of a headdress using only thread and a hook. Having the desire, all that remains is to choose what kind of decor will be created.

Despite the many options for knitted flowers, they are mainly divided into two types:

  1. Volumetric flowers.
  2. Flat flowers.

At the same time, it is difficult to say which of them is preferable for a beginning needlewoman. The fact is that flat floral products are easier to knit, but in voluminous inflorescences it will not be so visible if there was an accidental mistake.

Watch a video on how to crochet a rose flower for a hat:

The following video perfectly shows how to cast on the first loops and how to finish knitting:

To start knitting you need to cast on 48 air loops (VP).

  • The first row is knitted as follows: knit a double crochet (Dc) in 4 loops from the hook, then skip one loop of the chain, again Dc in the next loop, skip a loop, and so on until the end of the row.
  • Second row - VP, turn the work to the other side. Knit 2DC, 2VP, 2DC into the arch. This is done with each arch. The VP is knitted and the fabric is turned over again.
  • Third row - 7DC is knitted into the arch, a single crochet (SC) is made between the reports, 7DC is repeated again in the next arch, SC and so on.

It turns out to be a long knitted strip. Before cutting the thread, you need to measure at least 10-15cm. Thread this thread into a needle and thread it through every second loop along the cast-on edge. Tighten the thread and secure the end. The beautiful rose is ready!

Spring princess crown

This crown is very easy to make. You will need a piece of thick cardboard for the base (you can use unnecessary packaging). Use a marker to sketch and cut out the base.

To decorate the crown we will use ordinary napkins painted with watercolors. Using PVA glue, cover the crown with colored napkins on both sides.

When the napkins stick and the product is completely dry, you can continue working. For greater expressiveness, the crown should be outlined around the edge with green paint. Then we decorate the crown with multi-colored paper flowers and glue on beads. Volumetric flowers made from folded strips of paper will make our crown even more elegant.

All that remains is to fit the crown on your young princess’s head (you can connect the ends of the cardboard tape using a stapler).

National wreaths

Recent fashion trends increasingly emphasize national identity, not only with the help of fabrics and silhouettes, but also with the help of accessories - shoes, handbags, patches, hats.

Slavic

It can be woven from living plants, assembled from artificial buds onto any type of base - wire, hairband. The main thing is to decorate the wreath with ribbons. There should be many of them, different, contrasting colors, symbolizing the rainbow, plain or with national designs, embroidery.

The ribbons are located at the back of the head. If a headband is used as a base, it is supplemented with ties or wires are placed between its ends and ribbons are attached to them.

Roman or Greek

These national wreaths are very similar - they are decorated with leaves, flowers are rarely used for decoration, only in the “Greek” version.

Roman is a laurel wreath. The leaves can be supplemented with laurel “grains” (achenes) made of black beads or matching beads. The decor can be arranged in one or several rows, making the wreath taller and more voluminous. The main thing is to emphasize style and nationality.

There are not such fundamental requirements for decorating an accessory in the Greek style. Laurel leaves can be complemented with flowers with bright beads in the center, openwork woven elements made of thin copper wire, and translucent lace.

Decorating yourself is natural. There is no need to be afraid of extraordinary accessories, such as a wreath on your head. It will be appropriate not only in a formal look, but also on a walk, at home, if it matches the clothing style, mood, and situation.

Crown with a large flower

This crown is decorated with only one, but large and very expressive flower.

We make the base of the crown from green paper ribbons of the same width. We cover the child's head with them, and then form a crosshair so that the crown does not slide onto the forehead.

We cut out the flower petals, make cuts on each of them and lightly pinch them to give the petals a curved shape. Then we attach them to the base of the flower, cut from darker paper. Using a dark green pencil, add lines at the base of each petal to give them an even more natural look.

We make the core of the flower from pieces of yellow napkin rolled into lumps, and the stamens from wires with beads attached to their ends.

How to make petals from fabric

There are a huge number of ways to make flower petals from fabric. Having mastered one technique, mastering others will be quite easy.

The simplest of them comes down to the following actions:

  1. Cut circles of different sizes from a piece of fabric.
  2. Using a candle, melt the edges, causing them to become curved.
  3. Connect the petals together with glue or thread.

There are a huge number of ways to make flower petals from fabric.

Master Class

each of us is a Master

Flower hats

Master class for the pilot issue of the “Games and Toys” magazine. Using various techniques for working with crepe paper, you can make hats in the form of a variety of colors. Making such a hat will take you about 20 minutes.

Materials and tools:

Kraft paper Crepe paper (In addition to paper for children's creativity, there is floral crepe paper, it is denser and holds its shape better. But I myself used children's paper) PVA glue Glue gun Scissors Strong threads (for example, “Iris”) Paper tape

Cut out a rectangle from craft paper (also called wrapping paper). One of its sides is 40-45 cm, and the second is slightly larger than the circumference of the head (about 60 cm). We make a small hem along the long side and glue it. This way we will strengthen the edge of the cap a little. It is convenient to use paper (masking) tape for this.

Then we fold our rectangle to the size of the head and glue the pipe.

We try on the hat and check whether it fits well on the head. Then, right on the head, we crumple the end of the pipe, twisting it a little. Secure with strong thread. The result is a hat with a ponytail.

If the flower is made of white paper, you must wrap the cap with the same paper, because... the paper may show through.

Now you need to cover it with petals. Cut out circles from crepe (corrugated) paper. If you cut a piece from a roll of crepe paper equal to its width, i.e. square, and fold it four times - you get a blank for four petals. On one side, we carefully stretch the petals with our fingers across the folds, and on the other side, on the contrary, we crush them, gathering them together. You need to make 6-8 petals.

Glue the petals to the cap. The easiest way to do this is with a glue gun.

We cut out the sepals from a piece of olive-colored crepe paper (in the store, pay attention to the color of the paper, it should resemble the color of the vegetation).

Glue them by wrapping them around the stem. Coat the stem with PVA glue and wrap it with a strip of crepe paper.

When it dries a little, apply glue again and wrap it in paper again, repeat this operation again and coat the finished stem with glue.

Petals can be made in another way. We cut out not just circles, but circles in the shape of flowers, carefully stretching the edges to make the petals more vibrant and voluminous. We collect them by the middle and glue them. This will create a lush flower, for example, marigold or peony.

Flower hats

Master class for the pilot issue of the “Games and Toys” magazine. Using various techniques for working with crepe paper, you can make hats in the form of a variety of colors. Making such a hat will take you about 20 minutes.

Materials and tools:

Kraft paper Crepe paper (In addition to paper for children's creativity, there is floral crepe paper, it is denser and holds its shape better. But I myself used children's paper) PVA glue Glue gun Scissors Strong threads (for example, “Iris”) Paper tape

Cut out a rectangle from craft paper (also called wrapping paper). One of its sides is 40-45 cm, and the second is slightly larger than the circumference of the head (about 60 cm). We make a small hem along the long side and glue it. This way we will strengthen the edge of the cap a little. It is convenient to use paper (masking) tape for this.

Then we fold our rectangle to the size of the head and glue the pipe.

We try on the hat and check whether it fits well on the head. Then, right on the head, we crumple the end of the pipe, twisting it a little. Secure with strong thread. The result is a hat with a ponytail.

If the flower is made of white paper, you must wrap the cap with the same paper, because... the paper may show through.

Now you need to cover it with petals. Cut out circles from crepe (corrugated) paper. If you cut a piece from a roll of crepe paper equal to its width, i.e. square, and fold it four times - you get a blank for four petals. On one side, we carefully stretch the petals with our fingers across the folds, and on the other side, on the contrary, we crush them, gathering them together. You need to make 6-8 petals.

Glue the petals to the cap. The easiest way to do this is with a glue gun.

We cut out the sepals from a piece of olive-colored crepe paper (in the store, pay attention to the color of the paper, it should resemble the color of the vegetation).

Glue them by wrapping them around the stem. Coat the stem with PVA glue and wrap it with a strip of crepe paper.

When it dries a little, apply glue again and wrap it in paper again, repeat this operation again and coat the finished stem with glue.

Petals can be made in another way. We cut out not just circles, but circles in the shape of flowers, carefully stretching the edges to make the petals more vibrant and voluminous. We collect them by the middle and glue them. This will create a lush flower, for example, marigold or peony.

Rating
( 1 rating, average 5 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]