Do-it-yourself rolling under a motorcycle: features, instructions

For many years, buying a bike has been every man's dream. Traveling on a two-wheeled beast with the ability to reach incredible speeds, enjoying the whistling of the wind and the cars flashing past, is truly an amazing experience. And if such a vehicle provides its owner with maximum safety and driving comfort, then the upcoming ride will be not only exciting, but also enjoyable.

Every motorcyclist must understand that his new “friend” needs appropriate maintenance, which consists of diagnosing and removing all kinds of faults. And in order to successfully carry out repair work at home, you need to equip your workshop with such a device as a motorcycle underride.

Using a motorcycle stand

Currently, rolling under a motorcycle is a very important attribute in the life of every motorcyclist. Such a solution should be present in every workshop, both at home and in a specialized one, where complex work is carried out. With the help of a tackle, you can carry out comprehensive maintenance and repair of your bike. In addition, such a device can become indispensable when repairing a car. As for two-wheeled vehicles, it is used when it is necessary to lift the rear part to replace disks or tires, or when repairing the cooling radiator. If you intend to repair the motorcycle yourself, be careful when choosing the appropriate model of stand.

Given the presence of movable wheels, such structures can be freely moved around the workshop, placing them in a specific place. As for the invention itself, it is a special type of motorcycle lift, but unlike classic models, there is no work table. Due to its compact dimensions, the roller is suitable for small chambers where a motorcycle is placed for painting or drying. The service life is practically unlimited, and no special maintenance is required.

Motorcycle lifts come in two main types, depending on the part of the vehicle that will be repaired. Based on this, a tackle occurs:

rear;
in front of him.

In most cases, representatives of the second category are supplied with a unique stand and a special adapter that allows you to hang the wheel and carry out a number of repair work.

Alternative options

If you have an unnecessary jack at hand, then you don’t have to worry about making a “stool”. To do this, we weld two channels to the jack on both sides of the lift and two more to them. After this, all that remains is to fix the guides and enjoy the finished design.

If the vehicle only needs to be transported or stored in a garage, then rolls can be made. These designs are footrests on wheels. They are installed either on the rear or front wheels. To make such a stand, you will also need a welding machine. You will also need to take measurements as shown in the picture.

The length of the product must correspond to the dimensions of the two-wheeled “horse”, so everything depends on its specific type and model.

Thus, you can save quite a large amount of money and repair your motorcycle without any problems.

Using a lift to repair a fork

It's no secret that a front lift is a useful tool for rebuilding a fork. You need to understand that existing adapters have different diameters , so you need to choose the right solution for a specific motorcycle. The front roll can be used to store the machine in winter. The design is particularly easy to use and does not require additional maintenance. As for operation, it is not at all difficult. It is enough to follow some rules and step-by-step guidance.

Tackles for the rear wheel, for example, L-shaped, are made in the form of an adjustable product, which is equipped with a comfortable handle. It can move along the surface due to movable wheels. The presence of clamps helps to hold the wheel on all sides.

When choosing the appropriate option, pay attention to the width of the clamp . It is determined by the width of the wheel. Such a roll will become an indispensable solution for workshops and repair services, where it is necessary to withstand loads of up to 300 kg, distributing the weight throughout the entire structure. Using this device, you can quickly lubricate the chain or replace it with a new one. You will also be able to hang the bike in such a way that the suspension receives maximum unloading.

Buying a factory model

Before deciding on a specific model, consider the manufacturer’s popularity and consumer trust in it. It is important to give preference to those offers that have appropriate quality guarantees and accompanying certificates.

It is no secret that all factory products are pre-tested for suitability for further use, which ensures maximum safety, both for the motorcyclist and his two-wheeled “beast”. A good tackle must have a GOST certificate.

As for affordable domestically produced products, in most cases they are quite high quality , but with imported models the situation looks completely different. Cheap lifts do not always cope with their responsibilities and are not suitable for full repairs. The wrong approach to choosing the right model can lead to great danger, creating an emergency situation or scratching the vehicle.

Offers from trusted companies are characterized by excellent performance properties and increased reliability. Such devices are purchased by professional motorcyclists who value their own safety and the safety of their iron “friend.”

In addition, self-respecting brands try to keep up with the times, so they constantly introduce advanced technologies in new developments , trying to improve existing products. Due to high competition in the production of new lifts, interesting offers are constantly coming on sale. Many of them are truly reliable and convenient and surpass previous developments in functionality and other characteristics.

A reverse handle is supplied with the tackle. A properly made product does not require complex maintenance, and it can be installed with the efforts of one worker. Transportation around the workshop is very simple, and the reliability of fixing the vehicle is maximum. Due to these advantages, the tackle allows you to successfully lift the rear part, protecting the car or motorcycle from an unexpected fall.

Factory inventions are professional equipment with many advantages. Let's highlight the most important ones:

Such models are actively used by professional racers and motorcyclists;
They are characterized by ideal geometry and versatility;
The factory-made trolley comes with a handle that allows you to operate it without the help of third parties;
Such devices are placed under pendulums or sliders;
Lifts from stores have special regulatory elements that allow you to change the configuration of width and length;

The main advantage of tackles is their ideal geometry. But it is this parameter that determines the reliability and correctness of the bike’s fixation.

Models for two wheels are practically no different from each other. When choosing such a solution, you should pay attention only to reliability and ease of use.

Many people prefer purchased models of motorcycle lifts, because there are a huge variety of them on the market. However, others try to make a tackle with their own hands, because its cost is quite high. If you belong to the first group, carefully consider all the characteristics of your upcoming purchase when purchasing a suitable solution for the rear or front wheel. If you don’t see anything difficult in trying to complete the design yourself, be prepared to devote the necessary time and attention to the upcoming operations.

What will it take?

First of all, it is necessary to prepare an approximate drawing of the future structure. You can take a photo of any finished stand as its basis. In our case, it will be a kind of stool with four lifting legs, which will be raised to the desired height using any old jack.

The main thing is to take the necessary measurements. First, let's measure the ride height. For cross-country models it is approximately 32 mm. Accordingly, the minimum height of the stand for storing a motorcycle will be about 26 mm. In order to carry out repair work, the unit must be raised by approximately 40-45 cm. Accordingly, for this you will need to purchase 4 pipes 30 x 30 mm about 20 cm long and the same number of pipes of a slightly smaller diameter (25 x 25 mm) about 25 cm long One pipe should fit into the glass (pipe of a larger diameter) not too tightly, but it is better not to allow the elements to dangle too much. The optimal space between the pipes is considered to be 1 mm, so if you purchase parts of a different size, you should take this into account.

In order for the structure to be a full-fledged lift, when making a stand for a motorcycle with your own hands, you additionally need to prepare:

Healthy! Of course, expensive equipment is difficult to obtain, so if desired, you can fasten the entire structure with ordinary bolts.

After this you can start working.

Existing types of tackles

As mentioned above, in the relevant stores you can find a wide variety of tackles for a vehicle such as a motorcycle. They are divided into several groups , having different operational properties, operating principles and prices. In order not to make a mistake in choosing the appropriate model, you need to study existing classifications in advance and review the list of popular offers.

Among the most common types of motorcycle tackles, the platform version occupies a leading place. It is characterized by special compactness, which expands its scope of use. Hydraulic inventions are necessary for repair work or maintenance of touring class bikes with large mass and dimensions. Such a solution is rolled under the motorcycle frame or engine compartment, and the use of a hydraulic drive helps raise the vehicle to a specific height.

The presence of such features gives the specialist access to all important components and parts of the motorcycle, which is necessary for successful comprehensive repairs. With the help of a good rolling tool, you can manipulate wheels, repair the chassis, and also carry out full diagnostics. In addition, lifting mechanisms are indispensable for machines of any class. Due to the presence of special adjusting screws, the motorcycle is fixed as securely as possible. In this case, the worker can adjust it according to the height and width of the device, leaving the working area free for further repairs from any side. A properly executed design allows you to get to the right place without much difficulty.

Making a stand

First you need to prepare the foundation of the future structure. To do this, you need to install the corners so that they form a rectangle and weld them. After that:

We install 4 30 mm tubes in the corners and weld them to the base. It is important to ensure that all elements are installed parallel to each other.
We install smaller tubes (25 mm) into the resulting glasses. They can be pre-lubricated to make them rise and fall easier.
We measure the height of all the “legs of the stool”. If they differ, then the finished structure will constantly stop.
Preparing the upper platform. To do this, we adjust the corrugated sheet of metal to the required size and weld it to the ends of the pipes installed in the glasses.
To add strength, we weld square pipes, angles or channels onto the longitudinal parts of the platform.
We prime and paint the finished structure.

Features of creating a homemade lift

Currently, the motorcycle lift market is filled with many different offers. However, due to the high price, not every motorcyclist can afford such a purchase. In addition, choosing the right option for your “beast” is not as easy as it seems.

And although some brands produce universal versions, their fixing elements do not fit all pendulums. Because of these features, many motorcyclists try to make a tackle with their own hands. A high-quality model is capable of lifting a motorcycle and locking it in a specific position. In this case, any costs will be reduced to a minimum.

If you have at least the basic skills and know how to handle some tools, this will allow you to complete the work ahead in the shortest possible time. In this case, you can create equipment that fits the size of your iron horse .

To successfully do everything yourself, be patient. It is no secret that such an action requires a lot of patience and time, so if you are not ready to sacrifice several hours to assemble all the parts, then simply do not start the work.

Step by step guide

You can use a variety of methods to lift the rear wheel of a motorcycle. One lifts it with a bushing placed in the rear wheel, allowing the chain to be changed or lubricated quickly and efficiently. The following method is suitable for cases where the bushings have threads for fastening to the pendulum. Here it is especially convenient to unscrew the wheel to change tires.
When making the frame, it is necessary to use welding equipment. If you don't have one or don't know how to handle it, ask an experienced welder for help. At this stage, you should weld the bushings and then calculate the angles. Take into account such a parameter as the alignment of the roll. If it is not correct enough, you will have to start the action from scratch.
If you have successfully built a homemade lift by following the established instructions and using only the appropriate materials and tools, it will likely have increased reliability, safety, and performance.

Every motorcycle owner wants to look after his “friend” in a special way, well and carefully. For this purpose, he is ready to take any measures to ensure that the iron horse works without failures.

Making a good motorcycle tackle at home is much easier than you might imagine. This solution will become an indispensable assistant in vehicle maintenance and repair, increasing driver safety while driving.