Since ancient times, our ancestors wore rings as amulets. Esotericists believe that due to their close contact with the skin and their location in the area where bioenergy lines are concentrated, rings are the most effective protectors against negativity from the entire range of jewelry. And along the way, they can also serve as talismans for good luck.
It is believed that the most effective amulets and talismans are those made by hand for yourself or very close people: they are initially saturated with the energy of the master. Perhaps this is why many people prefer to create rings with their own hands. Or do they simply want to realize their creative potential and replenish their arsenal with jewelry that meets their own ideas of beauty?
None of this matters. The main thing is that each person can make a ring on their own. The most difficult thing to work with, of course, is metals and stones. But a simple wooden ring can be carved by any man with hands growing out of their proper place.
What kind of wood can a ring be made from?
Wooden finger rings are stylish jewelry with a deep sacred meaning. In connection with the popularization of Slavic culture and Rodnoverie, they are rapidly gaining popularity among all segments of the population. And then there’s the tradition of celebrating Wooden weddings!
The fashion for natural materials is growing all over the world. So wooden rings are a sign of good taste and following global fashion trends.
However, wooden rings are still difficult to find on sale. They are presented, perhaps, in stores where they sell hand-made jewelry, and on artisan websites. But, as mentioned above, you can make wood rings yourself, even with minimal tools.
Having cutting and drilling machines for woodworking can significantly speed up and simplify the process. However, our ancestors created wonderful works of decorative and applied art exclusively by hand. Why are we worse?
Theoretically, a wooden ring can be made from any type of wood. However, you need to understand that the softer the material, the easier it is to process. But a ring made of soft wood (for example, pine or alder) will not perform well. And aesthetics, expressed in the beauty of the open natural texture of wood, will remain in question.
Therefore, it is better to use wood to make rings:
- Wild hardwood trees native to Russia. The most common and accessible are oak, hornbeam and ash. Birch also performs well, but it is a little soft for decoration. If you find a walnut, hazel, acacia or dogwood, that’s also good.
- Fruit trees. The wood of cherry, pear, apple and some other trees growing in our gardens has a very interesting texture. Even branches cut off during garden renovation can be used to make jewelry. The main thing is that they are alive and subsequently dried, that is, not rotten.
- Exotics. Eucalyptus, Karelian birch, mahogany or ebony, sandalwood, caesalpinia, Spanish cedar and other representatives of exotic flora are not found in our latitudes. Moreover: some species are on the verge of extinction. But sometimes blocks of their most valuable wood can be found in craft stores.
The wood of some exotics has not only exquisite primitive aesthetics, but also a pleasant aroma. A ring carved from sandalwood or eucalyptus will exude a natural fragrance that is beneficial for health.
The growths on trees (the so-called burls) have a very refined texture. However, they are very hard and difficult to process. In the first stages of independent creativity, you definitely shouldn’t use them.
It is better to sharpen the first ring from simpler wood in order to, so to speak, get the hang of it. You can even use thick plywood if you have it on hand. It is possible that the first product will turn out clumsy, or even break completely. There is no need to be upset: you should just take into account the mistakes and try again!
See all types of wedding rings in the SUNLIGHT catalog
Manufacturing Features
Start by preparing the rings. They need to be removed from the cornice. It is important to choose rings of different diameters. Then the finished product will look more impressive. If there are additional fasteners on the rings, they are removed.
Vyacheslav Fetisov headed the central council of VOOP
“Believe and know your worth”: Anna Khilkevich about real men
“Hands froze”: Russian woman played in a landfill at -30 for the sake of clean ecology
There is nothing complicated about creating a candlestick. Depending on the material your old curtain rings are made of, you may want to add a tiny drop of paint. This applies to wood products.
Methods for making wooden rings
A DIY wooden ring will most likely be made by cutting. That is, a prototype ring is cut out of a wooden blank using a cutting tool, the central part is selected (with a crown or drill) and the surfaces are processed manually (with sandpaper) or using grinding equipment.
There is an alternative way to make rings - bending. The blank for bending is a strip of wood approximately the width of the future ring. The wood is artificially softened (usually by wetting) and bent into a ring. This method allows you to obtain exquisite jewelry with an original texture, but it is quite complex and difficult to implement at home.
Wooden wedding rings made by a true craftsman are outstanding works of decorative and applied art. This is a wonderful gift for a married couple for a wooden wedding - their fifth anniversary of marriage. But some newlyweds also choose them as their main wedding rings.
Rings are often made from different types of wood, differing in color and texture. To do this, wooden blanks are pre-glued and then worked as if they were a solid solid.
Resin Application
This master class on handmade rings will require a little more time and preparation; without a certain form, manipulation will not be possible.
To achieve maximum effect in relation to design, the resinous solution is mixed with paper soaked in high-quality glue. Then a certain pattern is formed on the final result of the work; it is difficult to recreate a certain detail, but the abstraction also looks great.
It is not recommended to take solutions that are too dark; it is impossible to notice existing additions on them, which cannot be said about light colors, such as:
- Blue.
- Yellow.
- Green.
As soon as the liquid in the mold hardens, you should remove it and begin to form the future masterpiece using sandpaper or a needle file. Excess body parts of the accessory that have formed in large quantities can be removed using more crude methods, but caution at this stage will not hurt.
Experts do not recommend making cuts; such elements look beautiful, but the fragility of the item will become much greater, and with a careless impact, the decoration will simply crack in this area.
Combinations and decor
Finished wooden rings are rarely left in their original form: delicate jewelry is sensitive to moisture and temperature changes. Therefore, they are usually varnished or at least oiled.
The following can be used as additional materials and decoration:
- epoxy resin;
- painting with paints;
- thread (surface or through);
- burning;
- natural minerals;
- organics;
- metals.
Epoxy resin is an artificial polymer, but it combines surprisingly well with wood. Moreover, natural materials (for example, dried flowers) can act as fillers, and with the help of pigments you can give the insert any color: from a matching tone to a contrasting one.
Painting on wooden rings is used relatively rarely - the attractiveness of the open texture disappears. But if you want to create a decoration in an ethnic style (for example, “a la Russe” or in an oriental style), this option has the right to life.
The most organic and classic option for creating ring decor is carving. Using an ordinary cutter, craftsmen create amazing patterns in different styles. Sets of wooden rings and bracelets made in a similar design look very elegant.
Wood carving is a rather complex craft that you cannot learn in a day, and even without a single wound on your own fingers. Burning can be a worthy alternative. Even a child can handle a burning device, which can be bought for literally pennies.
Who said that wood is not friendly with minerals? Both of them are children of nature. Therefore, all kinds of semi-precious and ornamental stones are often used in decoration. Look how natural and stylish a wooden ring with malachite looks.
As expected, wood combines harmoniously with all kinds of organic matter. Wooden rings with amber look the most interesting. And with inclusions in the form of insects - it’s absolutely fantastic!
Wood is good for everyone, but it cannot be called exemplarily durable and wear-resistant. Therefore, when making wooden rings, a metal base is often used: this provides both strength and additional aesthetics. One thing is bad: it is almost impossible to create such a decoration at home.
If you choose wooden rings as wedding rings and plan to wear them constantly, it is better to choose jewelry with a metal frame. Silver plus valuable wood looks especially attractive in this regard.
Steel ring from the SUNLIGHT catalog
Creative plan
These candle holders are quick and easy to make and will look stunning with a selection of rings in contrasting colors. How to make candlesticks from old cornice rings?
For this you will need the following materials:
- two wooden balls;
- any strong glue;
- wood varnish;
- bowl for candlestick;
- rings of different sizes for the cornice.
Garden interior items made from saw cuts
Cuts from durable trees look impressive when making objects and elements of garden design.
Bird feeders
A bird feeder is one of the most traditional wooden crafts.
Birch wood is well suited for work. You can make an original bird feeder from round sections of wood, supplementing them with sticks and knots. The craft can be made from plywood and slats, and wood slices and bark can be used for decoration. It is important that the design is safe for birds.
Garden paths
Paths and paths on the site, lined with saw cuts from hardwood, will not only make the landscape unique, but will also last quite a long time if the work is done correctly.
An important step is the preparation of the material. It is necessary to obtain sections of equal thickness from the log. The recommended size is about 15 cm. They must be treated with an antiseptic.
At the site of the future path, a trench of small depth is dug, a layer of film is laid on the bottom, and crushed stone is poured. The material is carefully leveled and compacted.
A layer of sand should be poured on top of the crushed stone. To shrink the materials, the trench is spilled with water. Wooden blanks are laid in random order. The voids between them are filled with sand.
It is important to place the wooden parts as close to each other as possible.
Decorative flowerpots
Such original products serve as an excellent addition to the garden plot.
They can be made from a wide cut of wood. It is important to use healthy wood. Oak cut is not suitable for work due to its high strength. It is better to use birch or beech.
You can make a flowerpot as follows.
- Step back at least 5 cm from the edge of the workpiece and mark the outline.
- Drill several holes with a drill and pour saltpeter into them. You can cut down unnecessary wood using a chainsaw.
The size and shape of the products depends on the source material. Such elements of garden design do not require additional decoration.
Materials and tools
The basis of everything is rings for curtains with a diameter of 5–6 cm. For the proposed rectangular basket you will need 28 pieces. If you choose a different shape, draw a sketch in advance and calculate how many rings you will need.
For tying, use a skein of jute (if you prefer eco style) or other yarn of similar thickness and a suitable hook.
Also useful for this work are small scissors, fishing line or monofilament (for sewing knitted elements) and a needle.
