DIY pearl bracelet

All girls love jewelry, and in an effort to be special and unique, any girl is ready to look through a dozen stores. But the surest way to preserve your individuality is to wear hand-made jewelry.

In addition, thanks to such an interesting hobby, you can give original and cute gifts to your family and friends. Therefore, it will be useful for every fashionista to learn how to make beautiful bracelets with your own hands.

DIY pearl bracelet: ideas with photos, master class

Once upon a time, bracelets were a sacred element of clothing that protected their owners from the influence of evil spirits and evil spirits. Later, but still long before Christian times, bracelets began to show the status of their owners. The nobility preferred to wear jewelry made of gold and silver, while simpler people wore bracelets made of leather, wood, animal teeth, mineral stones and other materials that were at hand. In ancient times, wearing pearl bracelets was also considered a sign of nobility. Pearls were expensive, they were obtained the hard way, and only the most high-born persons could afford them. Now any woman can wear pearl jewelry. And, moreover, it can be made exclusive. Let's consider several options for how and what type of pearl bracelet you can create with your own hands for yourself or as a gift for someone you love.

Stylish and fashionable gift for a man

In the public consciousness, jewelry is a woman's prerogative. But it is not always the case. A man's bracelet made by the hands of his beloved woman will delight any member of the stronger sex.

Jewelry made from leather, cord, floss or rope with metal or wooden inserts will be a good gift for a friend, co-worker or boyfriend. Such things can emphasize the masculinity and brutality of the owner.

DIY hats for newborns. Several types of knitted winter hats for every occasion in a baby’s life
How to prepare essays on physical education
How to crochet beautiful napkins: tips with video lessons and patterns

Bracelet with jewelry insert

One of the simplest bracelets to make yourself will be a bracelet made from a single strand of pearls with a jewelry insert in the middle. It is advisable to make such a bracelet close to the wrist so that it does not turn over on the back of the hand, and the jewelry insert is always visible as the crown of the product.

The thread, wire, fishing line or lace on which the beads will be strung must be chosen so long that 1 finger fits between the wrist and the bracelet. If the bracelet is solid, without a clasp, then the insert can be selected with loops along the edges, into which we will thread the ends of the wire or thread. In order for the entire structure to hold tightly, the thread must be tied tightly and the ends of the wire bent with pliers. It's even easier to use a jewelry insert with a through hole. It just needs to be strung along with the rest of the beads. Then it is better to make a pearl bracelet with your own hands with a clasp, which can be purchased at a sewing accessories store or detached from some old product.

Volumetric pearl bracelet

A voluminous bracelet with pearls is more complex in design. In addition to imagination, you also need to use special schemes here. One of the easiest ways to make a three-dimensional bracelet is as follows:

We take pearls of two different sizes (large and medium).
We string each pearl onto a pin. It is advisable to take the same pins so that the bracelet does not look ridiculous.
Next, the pins with pearl balls strung on them must be attached quite tightly to a thin chain, using round pliers to bend the tip of the pin.
The beads are attached to the chain in a checkerboard pattern.

Such a bracelet can easily sit on the wrist freely. And it looks gorgeous on the wrists of petite women and ladies in the body.

But there are also more complex patterns for weaving volumetric bracelets. Fortunately, there are quite a lot of master classes on weaving pearl bracelets with your own hands, several of them are presented in the article.

Positive aspects of creativity

These are the easiest ways to make paper decorations. Show them to your child and he will be delighted. Girls will especially enjoy this process. After all, in the same way they can make additions to the bracelet - beads or a necklace.

As for boys, the same Egyptian bracelet will suit them perfectly and will give them the opportunity to imagine themselves as the last pharaoh of Egypt.

This will perfectly develop their spatial thinking and creative skills. Weaving bracelets will help little children develop fine motor skills and finger dexterity.

You can also experiment with design and translate all your ideas into creativity. The main thing is not to be afraid to fantasize.

Memory wire bracelet

A memory wire bracelet with a few pearls looks elegant. To make such a bracelet you will need:

A piece of memory wire with the required number of turns.
Rubber cord, cut with side cutters into tubes of the desired length or metal/plastic tubes of the required length.
A few pearls.
Caps for beads.
Round nose pliers.

At one end of the wire we make a loop using pliers, and then alternately string a cap for a bead, a pearl, a cap for a bead, a tube until the pancake of wire runs out. If you wish, you can string some kind of pendant somewhere in the middle that does not contradict the style of the rest of the bracelet. At the end, we bend the memory wire with round nose pliers so that the component parts do not fly off. A DIY pearl bracelet based on memory wire is ready.

Pearl embroidered bracelet

It is also easy to make a fabric bracelet using pearl embroidery. For such a bracelet you will need a piece of dense fabric that does not fray at the edges. For example, felt. We measure the width and length based on the parameters of the hand on which the bracelet will appear. Next, we sew special fasteners-buttons along the narrow edges (2-3 pieces, depending on the width of the bracelet), onto which we will fasten the finished product.

For variety, you can glue or sew one or more rhinestones to the surface, or you can get by with pearls of one or more colors that combine with each other. You can fold them into a pattern or sew them in a random order, alternating beads of different sizes. In any case, the bracelet will look rich. The master class for a DIY pearl bracelet based on fabric is quite simple.

Instructions for making woven bracelets

The history of baubles began in the days of the hippies. They were given to each other as a sign of special affection, so these bright products were called friendship bracelets. They made paired items for themselves and for a friend, then wore them without taking them off as amulets.

To create an interesting and colorful thread bracelet, you need:

Take threads of three colors, 80-90 cm long, and adhesive tape.
Fold the threads in half and make a knot with a loop that will act as a clasp.
Use adhesive tape to attach the bundle to the table surface to secure it.
Lay out the double ends of the threads so that they alternate.
Start weaving using knots: throw the first thread over the second and tighten the knot, bringing it under it and pulling it from the bottom up. Another knot is knitted on the second thread in the same way.
Then, with the first thread, the same knots are knitted on each subsequent one, two on each.
Thus, the first thread moves to the end of the queue, and the second one becomes the first. Now you need to repeat all the steps with this thread.
Next, you should repeat all the manipulations with each thread that ends up at the beginning of the queue.
Continue weaving until the required length of the bracelet is reached. It will show diagonal stripes of color.
After finishing the work, you will need to tie a large knot, which will be threaded into the loop as a clasp.

A simple clasp will securely secure the product to your hand. Stylish woven bracelets can be made in different colors to match any outfit.

Leather cord bracelet

A leather cord bracelet decorated with pearls can be made for both women and men. Such a bracelet can be very delicate, brutal, or in folk style. A bracelet made of 3-4 leather cords of slightly different lengths looks beautiful. To make such a pearl bracelet with your own hands you will need:

Leather cords of the same or different, harmonizing colors, cords of slightly different lengths.
Thread.
Clasp.
Pins.
Beads.
Spacer rings.
Glue.
Round nose pliers.

One end of the leather cords must be tightly tied into one with thread, lubricated with glue and inserted into the lock socket. Remaining glue should be carefully removed. We don't touch the other ends yet. We string beads (or bails) onto pins, bend the end of the pin with pliers and attach it to the spacer rings. Thus, we get pendants. We thread rings into the free ends of the cords (it is enough to string one pendant per cord). We fasten the remaining ends of the leather cords in the same way as the first time. To glue it to the lock, you can use superglue or special glue, which will be recommended in a craft store.

The options for such bracelets can be varied. Cords can be taken in pastel or dark colors; glass and pearls, delicate jewelry elements, or skulls and pearls in dark shades can be used as pendants. It all depends on the tastes of the person for whom the bracelet is intended and on the imagination of the craftswoman.

How to weave baubles according to patterns?

Jewelry made using direct weaving can have very different levels of complexity, so on the Internet you can find any option that best suits your skills. There are other ways - use a special generator or draw a diagram yourself on a piece of paper in a box. You can also use a cross stitch pattern.

To make your work easier, and to get a decent result, you should practice weaving a little and get better at it. To do this, for the first time, use simple patterns of narrow bracelets, consisting of just a couple of colors.

How many cells there are in the diagram, the number of threads you will have to prepare for work. Prepare the threads of the desired shades, fix them in any convenient way, and then start creating your own masterpiece.

It is recommended to take longer threads than you expect. Real experts in weaving baubles fix the threads without separating them from the overall skein. This way they manage to unwind the desired length during the creation process. If you are uncomfortable using this method, just choose threads measuring a meter and a half.

Making your own friendship bracelets with your own hands is an incredibly interesting and creative activity that is suitable even for those people who cannot boast of having a lot of free time. After all, you can weave baubles on almost any occasion, and the result will still turn out beautiful and original.

With the jewelry you make, you can please your loved ones by presenting it to them as a friendly gift.

DIY pearl and bead bracelets

Pearls can also be combined with beads. You can use beads and pearls to embroider various patterns on a fabric bracelet, replace tubes on a wire bracelet with many beads, add beads to pendants, and much more. In addition, beads can be used as a substitute for small beads in voluminous bracelets and used to decorate pendants on leather cord bracelets.

In any case, when making a pearl bracelet with your own hands, the main thing is to give free rein to your imagination and do the work from the heart.

Source

DIY pearl bracelet: ideas with photos, master class

Pearls are the only precious stone that is formed in the shells of certain species of mollusks that live in both salt and fresh water bodies. Depending on this, it is classified as sea and river.

The process of pearl formation is interesting. The mollusk does not have the ability to expel foreign bodies trapped in the shell. To protect yourself from harm from an uninvited guest, the “host” must isolate him. To do this, the mollusk envelops it layer by layer with mother-of-pearl, ultimately obtaining a precious pearl - a pearl.

The shape of the pearl depends on the place of origin of the shell, the weight on its size, and the color on the impurities included in the water in a particular place and the type of mollusk. White pearls with slight variations in shades (cream, pink, bluish) are considered exemplary. However, black, gray or golden pearls are also highly valued among connoisseurs.

Pearl beads are a decoration for any lady

Pearls are the oldest jewels that were used as decorations. Mentions of them are found in sources dating back thousands of years. They were of high value because they did not require processing.

At the beginning and middle of the 20th century, almost all the world's jewelry houses used pearl motifs in their collections. Pearl products crowned the image of such a fashion industry star as Mademoiselle Chanel, who introduced them into the mandatory wardrobe of every society lady along with the little black dress.

Today, pearl necklaces are as popular among fashionistas as they were a hundred years ago, and, just like a hundred years ago, they can adorn any woman, adding sophistication and style to her look.

Pearls can suit a woman of any age, with the exception of very young people - schoolgirls or teenagers. Considering the versatility of pearl beads, starting from the age of 20, you can safely wear jewelry made from it, choosing them to suit your own style.

Despite the constantly updating fashion trends in the jewelry market regarding pearls, the requirements for today's jewelry are absolutely not conservative. Therefore, even an old grandmother’s necklace will fit perfectly into an outfit if you modify it a little and “modernize” it by attaching a stylish pendant to it.

Do not mix expensive pearl accessories with cheap jewelry. This will spoil the impression of the image.

Basic weaving technique (flat knot)

Before you start working, you need to get acquainted with the main knot that will be used in weaving. It is called flat, or square. The weaving technique and pattern for beginners are shown below.

Pay attention to the light green cords: this is the basis on which we will weave. In the example, it consists of two threads, but you can easily take one, the diagram will look like this:

The base is always located in the center of the weave, and it must be properly tensioned for comfortable work. For example, you can use a shoebox lid and simple office clips for this.

Detailed description of the process:

We throw the cord from the working thread, located to the left of the warp (blue), over it and take it under the far right (red).
We take the red cord to the left, under the base, and pull it into the loop formed by the blue cord. Half the work is done, and now you need to repeat the same thing on the other side.
We draw the right cord (blue) over the base, under the left (red).
We pass the left cord (red) under the base and pull it into the loop on the right. We tighten it.

The unusual straight knot is ready. In fact, its weaving consists of two stages:

left: above the base - under, under the base - above, tighten;
on the right: above the base - under, under the base - above, tighten.

When using beads in the weaving process, the actions are no different: the beads are strung on the base, and the knots are tied between them. The main thing is not to hold back your imagination: we are sure that you will create a real masterpiece!

By the way, a bracelet with one spectacular bead looks very cool. To weave this element, it does not need to be tied with knots on both sides: the side threads can simply be threaded through the hole in the same way as the warp thread. Look at the example of both options:

How to weave a clasp for a shamballa bracelet

The “sliding lock” is made using the same square knots.

Of course, there are several nuances:

the knots of the “lock” should not be tightened too much so that it can be used safely;
instead of one main cord, we use two ends of the bracelet, folded together;
for tying, take a separate piece of cord 40-60 cm long;
we form a clasp by tying 5-10 knots; you can tie beads at the end.

Our master class below will show in detail how to weave a clasp.

Volumetric pearl bracelet

We take pearls of two different sizes (large and medium).
We string each pearl onto a pin. It is advisable to take the same pins so that the bracelet does not look ridiculous.
Next, the pins with pearl balls strung on them must be attached quite tightly to a thin chain, using round pliers to bend the tip of the pin.
The beads are attached to the chain in a checkerboard pattern.

How to make pearl beads with your own hands?

So, fashion demands diversity, but the wallet asks for mercy? Nowadays, beautiful pearl jewelry is quite expensive, since their price includes not only the cost of the material, but also payment for the work of the jeweler, and most importantly, design ideas.

However, by making a necklace yourself, you can not only save a lot, but also get an exclusive piece of jewelry with 100% confidence that no one else has one like it. And don’t think that only experienced craftsmen can do this. Even a beginner in this matter can assemble beads from pearls!

To do this you will need:

pearls - the more there are, the longer the beads will be;
clasp kit;
callots;
transparent superglue;
special round nose pliers;
scissors;
regular needle;
base for assembly.

It is best to collect beads on a nylon or silk thread, which will not react with water and cleaning compounds when caring for the product.

Another versatility of pearls lies in the fact that almost all shades of accessories can be combined with them. Additional elements are also selected to match the same color. Assorted fittings reduce the cost of the product.

The clasp of the necklace should not only be reliable, but also harmoniously fit into the design idea of the jewelry. For this purpose, in special stores there is a large selection of locks, decorated in a variety of styles and colors.

Collecting beads

We fix in the callot the beginning of the thread on which we will string the pearls. To do this, thread its end into the callot loop and tie it with a knot. We fasten the knot with instant transparent glue and clamp the halves of the product, leaving the knot inside.

A callot is a part for fastening accessories in the manufacture of costume jewelry, which is a camouflage bead consisting of hemispheres inside of which fastening elements, for example, knots, can be hidden.

Next we put the pearls on a thread base

To avoid deformation, the stones should not be in close contact with each other, so an intermediate link is inserted between them. It can be an ordinary thread knot or any suitable decorative elements - it all depends on the author’s imagination.

Having collected all the necessary pearls on the base, fix its end in the second callot, according to the principle of the first.

To make threading easier, use a sewing needle.

We fasten the clasp by connecting the callot hooks with the lock parts.

The beads are ready! These were instructions for assembling a simple necklace, however, by combining various decorative elements in this way, you can create real pearl masterpieces of any complexity.

Chang Lu talisman that brings good luck

A mandatory attribute of Chan Lu bracelets is leather cords and natural stones (agate, turquoise, cat's eye, tiger's eye, malachite and others), but no one is stopping you from trying to do the same with artificial beads. A fashionable bracelet is a chain in which two cords are connected by a central strip of stones. Traditionally, good luck charms are made with 2-3 or more girths.

*photo by Elena Goloshtenko
This master class uses tiger eye. The thick bracelet is universal and looks great on both men and women. You can give it as a gift to a teenage girl for her birthday. The main advantage of this decoration is that, if you have the necessary materials, you can easily learn how to assemble it yourself, without a machine or any other devices. Let's get started!

The double bracelet in this example is made in four turns, its length is approximately 80 cm. To make the same, you will need:

round cord - preferably leather, a little more than 2 m long;
agate beads with a diameter of 8 mm - 36 pcs;
tiger eye with a diameter of 8 mm - 36 pcs;
wooden button with a diameter of 1.5-2 mm - 1 piece;
three yellow metal pendants and rings for them;
durable nylon thread matching the cord;
needle, pliers, scissors.

When choosing a needle, consider the size of the holes in the beads.

Advice: the cord should be smooth, with a round cross-section. Suede is not suitable - it deforms too easily.

Step-by-step process for making a bracelet:

Fold the cord in half and thread each tail through the button holes on the front side. Pull the button all the way through and tie a knot, fixing the fastener element in one place. Do not tighten the knot too much, it is not adjustable!

We cut off 5-6 meters of nylon thread. It is better to calculate the length with a margin - it is not very convenient to work with, but it will be enough for the entire length of the bracelet. Fold the thread in half, tie a knot and place it in the one that was used to secure the button.
Now you can tighten it more tightly, and for reliability, drop a little glue-moment - this way it will definitely not come undone.

We trace the top leather cord with a needle, string a tiger eye bead and trace the bottom one. We return to the original position through the same bead.

In this way we increase the length of the bracelet: 18 beads are enough for one circumference around the wrist.

Then you need to change them: take agate instead of the tiger’s eye, and sew on 18 beads again. And we repeat again: 18 tiger eye beads, and 18 agate beads.

When all the beads are sewn, you need to tie the same knot as at the very beginning, and also hide the nylon thread inside it. We cut off the remaining thread at the knot itself, and glue the ends if necessary. Since we already have part of the fastener in the form of a button, all that remains is to make a fastening for it by tying a couple of knots from the remnants of the cord.

Cut off the ends of the cord.

If desired, you can attach various pendants: to do this, open the connecting ring on the pendant, hook it to the cord in the right place and close it using pliers.

That's all, you can wear the amulet! He gives to everyone “according to their needs,” depending on what the owner needs. Whether it's love, friendship, or good luck in business - homemade Chan Lu will be your assistant in any endeavor!

In our previous article we wrote how to make a shamballa bracelet>> Go and watch the free master class. There are some very interesting ideas there.

Memory wire bracelet

A memory wire bracelet with a few pearls looks elegant. To make such a bracelet you will need:

A piece of memory wire with the required number of turns.
Rubber cord, cut with side cutters into tubes of the desired length or metal/plastic tubes of the required length.
A few pearls.
Caps for beads.
Round nose pliers.

Bracelet with jewelry insert

Step-by-step instructions

First of all, you need to take 7 polyester cords (35 cm each) and wrap them in a bundle.
Thread the clip through the tip and onto the cords.
The wire must be cut with wire cutters, further than 1 cm from the clamp
Bend both ends with round pliers to create an eyelet on both sides.
We wind a wire (0.2 cm wide) to the cords, retreating 10–12 cm from the clamp.
We string pearls onto the wire and wrap the cords with wire and beads. Do 32 turns.
You can thread a gold and glass bead along the pin, and a stud on the last one. We cut off all the ends.
We make ears on each bead. We grab the tip of the pins and nail with round pliers and wrap it until it stops.
Having opened the eye of the pearl, we attach the eye of the pin to it with a glass pearl. Add the remaining beads to the second ear of the glass pearl. We attach this chain of pearls with a ring to the center of the decoration.
We add five pearls to pins, and attach one to a nail. We make ears on them and attach them to each other. We fasten the chain to the base with a ring, stepping back a little from the attached chain.
We make 7 chains of gold and 8 of glass pearls (as you like). We attach the structure to the base.
We make the lock using a ring on one side and a ring with a carabiner on the other.

Paper beads

This idea of making beads can be called universal, because on its basis elements of any color and size are obtained, from which jewelry is made to suit any style and image. Any paper is used: colored, cardboard, glossy magazine sheets and even postcards.

First, the sheet needs to be cut into strips 22 cm long and approximately 1.2 cm wide. Please note: on one side the width of the strip will be 1.2 cm, but it needs to be narrowed along the entire length towards the center to form an elongated triangle, as in the diagram .

Take a toothpick and roll a strip of paper around it, starting from the wide edge. To keep the paper bead in shape, secure the last couple of centimeters of the strip with glue.

We also advise you to lubricate the entire surface of the finished bead with glue: PVA will increase its strength. While the glue layer dries, the paper beads can be decorated with sparkles.

That's all, actually. All that remains is to let the beads dry and collect them on a thread or elastic band.

This craft is well complemented by metal and plastic pendants and large beads: experiment, and the result will pleasantly surprise you!

Start of the process

Personally made items have always been distinguished by their unusualness and extravagant design from their purchased counterparts. Today, every needlewoman can afford to assemble a necklace from almost any material. The necklace can be leather, wood, plastic or any other.

On the vast world wide web you can find necklace patterns that allow you to create jewelry of any shape and size. Below we will consider several options for this jewelry made from different materials.

Pearl embroidered bracelet

Source

Stage three – forming an assortment, preparing photographs of products

This is a very important step. You need to make one sample of each type of bracelet that you intend to offer to customers. Later you can safely sell all these samples. But for now they are needed for a photo shoot.

So, you will need the following:

Samples of finished bracelets;
SLR camera with a good fast lens for subject photography;
A beautiful background - a piece of white or black fabric, large sheets of paper or a colorful wooden board;
At least basic knowledge of subject photography can be studied on the Internet.

Well, or just invite a photographer, pay him and wait for cool shots.