Searle engine: operating principle

Publication date: March 1, 2020

John Searle's invention is called the energy of the third millennium. The fuel-free generator he created operates on the basis of a balanced magnetic system; it can be used as a source for generating electricity at home. Despite the fact that the first generator design was developed by a scientist back in 1946, there are no publications about it in scientific journals. How to assemble a John Searle fuel-free generator with your own hands? What will you need for this? The answers to these and other questions are in our article.

What is a Searle generator?

The John Searle effect is based on the use of a magnetic field; this is a fundamentally new method of generating energy. Its essence is as follows: electrical energy is produced by rotating magnetic rollers around magnetized rings. Interestingly, the device not only emits electricity, but also creates a gravitational field around itself.

The generator consists of three concentric rings fastened together. Magnetized cylinders are located around them. All cylinders can rotate freely in a circle.

Searle generator: the whole truth about flying saucers!?

Saving our planet is a monumental task. If we want to restore the environment, a lot of useful work will need to be done. Once you decide to do this, you will need a lot of energy. It should be cheap and completely environmentally friendly.

For more than 60 years, John Searle tried to give the world a new type of energy system that would free humanity from the burden of oil and the hype around fuel resources.

This generator is a magnetic device that is completely magnetic. It has its own motor that starts and keeps running and, as far as we can tell, never stops.

The Searle effect is an effect of magnetism based on magnetic fields that cause magnetic rollers to continuously rotate around magnetic rings, generating electricity. No noise, no heat, no vibration, no pollution - all this is the Searle Generator. It is capable of lifting off the ground and forming its own gravitational field.

When you see such things, you realize that this is the perfect mechanism, the most important invention that man could ever create.

We were just trying to create a generator that could light houses, something simple, as I had come to the conclusion that big generators in power plants were a waste of money and meant big pollution problems for us in the future. Therefore, the idea was to create some kind of simple electricity generator that would be easy to manufacture.

They tell me - you can't do this, you will destroy the entire world economy, the entire world economy is based on oil, and it works, they say.

Well, it works very well for those at the top of the economy, but probably not for everyone else.

I continue to argue that the economy will not collapse, there will simply be a long paradigm shift, much like the transition from horsepower to the automobile.

We built 41 flying discs, and they flew and were fully controllable. Before that there were 6 more that flew away. They were uncontrollable.

It was a device containing all the achievements of science within itself. This generator could be used as a power source. But it was his ability to fly that was so exciting.

There are many companies involved in the generation and distribution of electricity, large corporations. The invention would threaten their existence. They try to keep such inventions secret and prevent them from entering the market, because the market situation will change not in their favor. They want to maintain influence. Oil companies and a number of other large enterprises rule the world. Unfortunately, they run most governments too.

How to get energy from something that cannot exist

There are many things in the world, friend Horatio, that our sages never dreamed of - Hamlet. Shakespeare.

In any category of knowledge, there are topics that people try not to raise for wider discussion; it’s almost bad manners. In the field of alternative energy, such areas include everything that can be interpreted as a perpetual motion machine. Let’s clarify right away – a perpetual motion machine does not exist!

Everything that begins in time will end in time.

In 1775, the French Academy of Sciences banned them from even being considered. Since then, they have accumulated several dozen different devices that work for tens and hundreds of years without any human effort. The operating principles of some of them have been explained in recent decades. Several models have even received commercial distribution. For example, the Atmos watch produced in Switzerland has become the same national souvenir as the matryoshka doll and samovar in Russia. They do not need to be started; they draw energy from daily temperature fluctuations or changes in atmospheric pressure. The very first such device has been in operation for a century and a half.

And in the Oxford Museum there is an alarm clock that has been ringing at a frequency of 2 beats per second since 1840! Nobody knows exactly how it works, because its inventor hid the device in a double glass case.

There's also a Crookes pinwheel.

You might also like the following materials:

Your own electricity

Alternative energy sources

or at least the Drinking Bird toy. In general, such devices exist!

Of course, they will not work forever, but this is not required for autonomous energy supply to a private home! 20-30 years are enough until the parts wear out. For example, Karpen's pole provided electricity for 60 years.

It may not have been enough, but there was energy!

500 years ago, everyone knew that the Earth was flat; back in the mid-19th century, no one believed that metal ships could sail the seas; the belief that it was impossible to fly on a heavier-than-air craft was refuted only in 1903. At the very end of the 20th century, Russian scientists Godin and Roshchin, at the Russian Academy of Sciences, assembled a converter that, without consuming anything, produced more than 6 kW of free electricity. The results of the experiment are recorded and are publicly available.

Researcher biography

English scientist John Searle was born in 1932 in Great Britain in the county of Berkshire. His childhood was difficult. The parents paid absolutely no attention to the boy. His father left the family, and his mother suffered from mental illness. When Searle was 4 years old, the court ordered him to be taken away from his family and placed into state custody. The young man was subsequently unable to obtain an academic scientific education. And this, according to the scientist, became the basis of his non-standard thinking and ability to discover unusual mathematical models.

In 1946, Searle began earning his own living by working as an electric motor repair specialist. In the workshop, among other things, he also received permission to conduct independent experiments on the creation of magnets that were unusual in composition and production method and their use for the production of fuel-free sources of electricity. As Searle later explained, he saw the mathematical principle of his invention in a dream when he was a child. At that time, the future researcher did not even understand the essence of his night vision. However, the next morning he still wrote down all the mathematical formulas he dreamed of.

As an adult, guided by his dreams, of which the researcher saw several, he created a device known today as the Searle engine. The characteristics of the first generators assembled by the scientist were not the same. The engines assembled by this researcher's team could have different power, properties and operating parameters. Such disks not only generated free electricity, but even flew. Of course, John Searle used his invention, including to electrify his own country house. This is what subsequently became the reason for the collapse of the business he started.

A local company that supplies electricity to the population accused the researcher of fraud and theft. As a result, John Searle was sent to prison for several months. When the inventor was released, he discovered that his house was burned down, the generators had disappeared, and the equipment from the laboratory had been taken to an unknown location.

John Searle today

Currently, this English researcher is not officially involved in assembling flying generators. This may be due to a lack of funding. Or maybe John Searle is still afraid of persecution from organizations representing the interests of modern energy companies. Moreover, the scientist is already venerable.

However, the researcher still has his own team of like-minded people and associates. In addition, the scientist collaborates with several American and Taiwanese laboratories, which are also engaged in the creation of SEG magnetic motors.

What can magnets do?

Since ancient times, magnets have attracted the attention of restless and searching people. But if before the 20th century, attempts to build a non-volatile engine were based on the attraction of opposite poles, then 75 years ago the paradigm changed. This may sound paradoxical, but the minds of inventors began to be attracted by the repulsion of the magnet poles of the same name.

In the mid-40s, the Englishman Searle came up with an original design that was brilliantly simple and insanely incomprehensible. Around the ring magnet, he placed small cylindrical magnets. At the same time, he selected the arrangement of the poles in such a way that they were repelled from the central ring. They called this device the “Searle disk”.

After unwinding, the magnets began to accelerate automatically, the speed reached some insane values, and then the incredible happened - the disk soared into the air and disappeared. History describes that Searle made several more similar discs, but for some reason the idea was not continued.

Searle's developments

The circuit of a power plant based on a Searle generator includes electromagnetic coils located around the described generator, in which an electric current is induced. Thus, according to unconfirmed reports, Searle assembled his first 0.5 kW generator.

After 6 years, D. Searle made a new generator with a diameter of 1 meter with three rings. When it was launched, the potential between the ring magnet and the rollers increased to 100 kV. At the same time, a characteristic crackling sound was heard and the smell of ozone was felt. According to the author of the device, this proved that the electricity generator is also a high-voltage generator. When connecting electromagnetic converters, the generating device operated with a power of 15 kW.

Important! Research information is undocumented and may be fabricated.

Searle engine design

Unfortunately, the exact circuits of this generator in its original version have not been preserved. And John Searle himself, who is still alive today, does not give any explanations to the curious. However, the operating principle of such devices and some features of their design are still known and are freely available, including on the Internet.

What is the invention of the English researcher? The main design elements of the Searle engine are:

a ring magnet of a sufficiently large diameter;
C-shaped electromagnet;
magnetic cylindrical small rollers.

The latter are located on the outside of the ring magnet. When one roller moves, all the others begin to move. This is due to the normal action of magnetic forces. Rollers can be made, for example, from ferrite. Rare earth magnets and magnetic ceramics are also considered suitable materials for them.

The rollers can be moved around the ring magnet at any speed. But at certain, very high values, these elements, according to Searle and some other researchers who confirm the veracity of his experiments, begin to rotate independently with acceleration until they reach dynamic equilibrium.

According to available information, John Searle's first magnetic motor, built in 1952, was similar to a large bearing and consisted of three rings with electromagnets mounted on the periphery. Each ring was divided into segments by insulating spaces.

Initially, as already mentioned, the researcher created his engines himself. So, for example, a query in a search engine “Searle/Shelton engine” or any other similar one will not yield absolutely no results. True, to build his generators, this English researcher used money from sponsors he found. Later, the scientist, of course, also recruited his own team.

Anti-gravity effect

While working on his generator, Searle, among other things, discovered one very interesting and unusual pattern. He noticed that as the number of rollers increases, the speed parameters required for the engine to start operating independently decrease. This discovery allowed Searle to eventually, among other things, develop a simple, cheap system for automatically starting a generator. For this purpose, the researcher used a conventional low-power diesel engine.

Searle also drew attention to the completely strange effect of his generator. It turned out that as the rotation speed of the rollers increases, the device begins to lose weight. In addition, under such conditions, the temperature inside the generator drops significantly and superconductivity occurs. As a result, the effect of self-propulsion of the rollers at a certain speed, which is given to them by a conventional diesel engine, led to the fact that the researcher simply lost about six of his disks.

According to Searle, at some point, his generators, instead of quietly generating free electricity, suddenly took off and flew away in an unknown direction at great speed. At the same time, the antigravity effect even intensified if the disk was loaded with something. To make sure of this completely, Searle placed heavy irons, pots of water, etc. on his devices.

Thus, experimentally, Searle also discovered the anti-gravity effect of the engine he created. Subsequently, the researcher and his group developed and built several of these “UFOs” of different sizes, which could be controlled from the ground. The most famous was the R-11 disk generator, which consisted of 3 magnetic rings and had a diameter of 3 m. It is this Searle engine that is presented to our reader in the photo below. This fantastic device flew from London to Cornwall and back in just a few minutes.

Stop method

Unfortunately, there is no exact scientific basis for the operating principle of the Searle engine at the moment. However, the fact that such generators were once invented and assembled is indeed confirmed by many people. Searle's engines were spinning, as eyewitnesses note, simply at enormous speed and it was often difficult to stop them. Because of this, the researcher, in general, lost several of his flying disks. One of them, according to the scientist, flew up from the assembly site at tremendous speed, apparently straight into space.

Of course, Searle subsequently discovered a way to stop his engines. It happened completely by accident. The researcher simply began filming one of his generators with a television camera and noticed that the latter slowed down and then stopped altogether. As the scientist managed to find out, the reason for this was precisely the operation of the television camera, which emitted electromagnetic waves of a certain frequency. Searle later began to use this principle to deliberately automatically stop the disks he created.

What parts will you need?

In order to make a magnetic Searle generator with your own hands at home, you will need the following parts:

magnets of different sizes for making rollers and stator;
current collecting coils;
generator housing;
accelerating electromagnets;
metal for making a clip;
electrical circuits;
epoxy adhesive.

The dimensions of the stator will depend on the diameter of the rollers. In order to assemble a Searle generator, you will need at least 12 magnetized rollers, and the distance between them must be equal to the diameter of one roller.

How the device works

The operating principle of a Searle effect generator is based on the property of magnets to attract and repel each other. Opposite poles attract magnets, and like poles repel them.

If you place cylinders of the same magnetization around the base, they will begin to repel at equidistant distances. When you try to move one magnetized cylinder, all the others will immediately move, while the distance between them will be maintained.

Rotating the base will cause the rollers to move. By gradually increasing the speed, we can achieve rotation of the system as a whole over a certain period of time. As a rule, the movement of the system is provided by bearings.

As the cylinders rotate, they pass through the gaps of a yoke made of magnetic material. As a result of this, an electromotive force (EMF) is induced in the coils wound on the yoke; it can be removed from the terminals attached to the ends of the coils. And here you can learn how to assemble a homemade wind generator from an asynchronous motor.

Roshchina-Godin converter

In the mid-90s, two Russian scientists, Vladimir Roshchin and Sergei Godin, decided to test Searle’s idea at the Russian Academy of Sciences. But they approached the problem from a scientific position.

All projects and experimental results were documented and published. To say that the result was phenomenal is to say nothing.

Description of the generator and experiment

An installation weighing 350 kilograms was assembled on the ground floor. 110 kg of rare-earth magnets were used to manufacture the central ring magnet (stator), and the mass of all rollers was 115 kg. The diameter of the converter is about 1 m. Mechanisms were provided for initial unwinding, recording mass, temperature, and an original method for generating electricity.

I will attach additional useful information in pdf files in the comments: Stomping around the Searle generator Analysis of the dynamics of the Godin-Roshchin installation Searle effect

By applying voltage to the built-in motor, the rollers spun without any effects up to 200 rpm. Then there was a decrease in the weight of the device and a decrease in power consumption for startup. At a speed of 550 rpm, the converter abruptly switched to self-spin mode, current consumption dropped to zero, and weight was reduced by 50%.

Since the stator was assembled from several segments, the speed was forcibly limited to 10 rpm. At this time, they began to remove the active load from the converter. To do this, several heating elements were connected in series, each with a power of 1 kW.

After connecting the next heating element to the circuit, the rotation speed decreased slightly, but was restored very quickly. As a result, the converter was able to produce 7 kW of electricity without stopping rotation. Depending on the direction of rotation, clockwise or counterclockwise, the installation either increased or decreased the mass. The room smelled of ozone.

There was also a strange effect - a wall of cold.

Within a radius of about 15 meters, an anomalous decrease in temperature of 7-8˚C was observed and recorded by sensors. These cold zones diverged from the installation like rays: a sector of low temperature 6 cm thick, then a gap of about 0.8 m, and so on in a circle. Outside the walls of the laboratory, on the street and on the second floor, temperature anomalies were felt even by the body.

During a month of experiments, more than 5 dozen converter launches were carried out in different modes. All experimental results are recorded.

Scientists' conclusions

A quarter of a century has passed since those experiments, but both enthusiasts were still unable to describe the effects of the converter’s operation within the framework of the paradigm of official science:

The fact of receiving free energy is recorded.
The converter material remained intact.
Anomalous temperature locations, some strange by-product.

During the experiments, many laboratory employees were in the area where the alternative energy generator was operating, where other inexplicable phenomena were noted, such as the glow of objects or corona discharges of electricity, but this had no effect on health and well-being.

Confirmation of the existence of the effect

The characteristics and description of the Searle engine given above allow us to judge it as a very useful device, certainly interesting, but also raising many questions. Disputes in scientific circles and on the Internet about whether the generators created by this English scientist actually worked continue to this day. Some researchers and curious people believe that the assembly and use of such installations is quite possible. Others believe that Searle is nothing more than a hoaxer misleading the public.

Judging by the description, Searle's engines actually had absolutely ordinary properties

It is possible, of course, that no flying magnetic roller disks ever existed, and the English researcher simply deceived the world in order to attract attention to himself, and also not pay for electricity. However, Searle’s experiments were repeated, including by amateur enthusiasts and even serious scientists

Several such experiments were carried out in Russia.

In the 90s of the last century, for example, a similar installation was created and patented by domestic masters Roshchin and Gordin. However, soon the work on the production of such generators by these researchers was curtailed for unknown reasons. Only the results of the experiments of these specialists have been preserved. Roshchin and Gordin, according to available information, managed to create a generator that loses weight up to 40% and produces up to 7 kW of electricity without any external costs.

According to available information, domestic scientists also conducted experiments to recreate Searle’s “perpetual” engine. At the Institute of High Temperatures of the Russian Academy of Sciences and OJSC NPO Energomash named after. Academician Glushko" an experimental installation using rare-earth magnets was created. It was called a converter. As a result, scientists found that as the Searle generator rotor rotated clockwise, the weight of the platform actually began to decrease (up to 50%). When rotating in the opposite direction, its mass, on the contrary, increased.

The researchers also found that when the rollers reach a speed of 550 rpm, the rotor speed actually begins to increase spontaneously. However, at the same time, scientists were able to find out that when a load of more than 7 kW is connected, the Searle engine, unfortunately, exits the self-generation mode. Domestic experts also confirmed the presence of side effects accompanying engine operation - a pink glow and the smell of ozone.

The researchers also found that during its operation special magnetic walls appear around the converter, which coincide in vector with the field of the rollers. Beyond this limit, the air temperature inside the generator decreases, compared to the room temperature, by 6–8 degrees.

Anti-gravity engine

Further research allegedly showed new capabilities of the Searle generator. So, in 1999, SISRC Ltd announced the results of modernizing the generator and made a couple of loud, but unfortunately unsubstantiated statements. To enhance the power of the generator, the magnets were doped with neodymium. Having tested the new generator, the company’s specialists stated that the key role in obtaining electrical energy is played by the transformation of the energy of the vacuum state, which, of course, is at least incoherent and incomprehensible.

More fantastic was the second statement, that when dynamic equilibrium was achieved, the device took off. Levitation was explained by the fact that the interaction of an electric field of significant intensity with a radial vector and a pulsating field creates its own gravitational field. Considering that the gravitational field itself remains unstudied to this day, and particles such as gravitons are only hypothesized, this statement can safely be called complete nonsense.

At the same time, the idea remains attractive and many try to assemble a Searle generator with their own hands. The device diagram is often provided on the Internet. The videos demonstrate the capabilities of the miracle technology, which spurs interest in the invention. Still, it is worth noting that not a single attempt has yet been crowned with success, that is, it has not been officially documented. The Searle generator is of no interest to science and is not used in any enterprise.

How to assemble a John Searle fuel-free generator: step-by-step instructions

Publication date: March 1, 2019

How to assemble a Searle generator: the sequence of manufacturing all the parts

We make magnetic rollers

Each video will consist of 8 segments. There will be a neodymium magnet inside it, then a plastic ring and a metal clip. To make 12 rollers you will need 96 such segments.

You can make a clip from an aluminum pipe; caprolon is suitable for the plastic layer. First you need to cut metal and plastic rings on a lathe. Then press the metal rings onto the plastic ones, and place magnets inside them. From the resulting segments, you need to glue magnetic rollers, 8 segments each. All parts must be the same size.

Assembling the stator

We will need three large magnetic rings placed together in opposite polarities. They need to be glued into one magnet. To make a metal clip for a magnet, you can use an aluminum pan of a suitable diameter or a ready-made circle of metal. It is necessary to cut a clip from the pan, the height of which will correspond to the height of the magnet.

The next stage is to fill the internal volume of the magnet and the space between the magnet and the holder with hot glue. This is necessary in order to hold the magnet in one position and smooth out shocks when interacting with the rollers.

We make accelerating magnets

The job of accelerating magnets is to repel the rollers as they approach the electromagnet core. You can make an electromagnet coil with your own hands, but to do this you will have to wind the wire onto the cores yourself. You can also purchase ready-made parts. The electromagnet must be installed in such a way that the ends of the core are located symmetrically to the poles of the roller. A total of 12 electromagnets will be needed.

Electromagnet control circuits

These elements will supply current to the electromagnet coil at the moment when the roller passes by it. For these purposes, circuits with a magnetic sensor can be used. As soon as the roller approaches the electromagnet by 1 cm, the sensor will light up, and when it leaves, it will go out. To make the circuit, you will need 12 circuit boards (their number must correspond to the number of electromagnets).

Assembling the generator

The last stage is assembling the John Searle fuel-free generator with your own hands. The stator magnet is located in the center. Then rollers and electromagnets are installed in a circle. To increase the efficiency of the device, you can install them on an axle with bearings; there should be a minimum gap between these elements and the stator. The result will be a flywheel that will be driven by electromagnets and pulsed current.

Thus, the Searle generator is one of the unusual energy sources that operates on the basis of magnetic fluxes.

Practical application of the Roshchin Godin generator

Imagine, a man digs a deep dry well in his yard, installs a Roshchin Godin generator there, and only two live wires go up.

Convenient scheme. All that remains is to assemble a free energy generator. There are drawings, magnets can be bought.

But you will have to do this yourself, solely at your own peril and risk. Because in our usual view, state governing bodies no longer exist. The remnants will be swarming for another six months, and then they will follow in the footsteps of the first president of the USSR.

And owners of private houses will have to think about how to get electricity from alternative sources.

The History of John Searle's Magnetic Generator

Rice. 4. -G, +G, changes in platform weight compared to rpm

Rice. 1.

Single-row converter option

Rice. 2.

Method for organizing magnetic engagement of the stator and rollers

Rice. 3.

General diagram of a single-row magneto-gravitational converter

Fig.4

Rice. 4.

Operating modes of the magneto-gravitational converter

Rice. 6.

Corona discharge diagram around a working converter

Rice. 7.

The location of the converter in the laboratory and the location of concentric magnetic walls

Rice. 8.

Dependence of magnetic field intensity and temperature change on the rotation speed of the converter rotor

In the footsteps of John Searle! Magnetic installation Roshchina, Godina.

Thank you for reading to the end!

Don’t forget to subscribe to the channel and give it a “ thumbs up ” if you liked the article!

Tomilin Alexander Konstantinovich about the John Searle effect.

Generalized electrodynamics Tomilin Alexander Konstantinovich

East Kazakhstan State Technical University named after.
D. Serikbaeva 070010, Ust-Kamenogorsk, st. D. Serikbaeva, 19 Signed for publication on April 9, 2009 In accordance with the main theorem (Stokes-Helmholtz) of field theory, the magnetic field is proposed to be described by two functions: vector - H (x',y',z',t), and scalar - H*( x', y',z',t).
Nikolaev G.V. calls the newly introduced component a scalar (potential) magnetic field (
SMF
) in contrast to the usual vector (vortex) magnetic field.
Accordingly, the function H*(x', y',z',t ) will be called the SMP strength. ...
24. Searle generator
Fig. 53 Nikolaev R r 40's 50's 10 m generator, without ceasing to rotate, began to rise upward, was disconnected from the accelerating engine and rose to a height of about 50 feet. Here it lingered a little, accelerating more and more, and began to emit a pink glow around itself, ionizing the air. He then continued upward and disappeared from view. Fig.56 1 2

It is more convenient to make the rollers bipolar, although an option with multipolar rollers is also possible. In the case of bipolar rollers, the number of stator poles is calculated by the formula:

The number of rollers can be R/r = 4 Fig. 57a

moment relative to the stator axis, acting counterclockwise.

rice. 57a

rice. 576 15 1 ' 30 15 15 2 ' 3 15 fig. 54b 15 fig. 57v 15

rice. 57a 12 24 fig. 56 30° fig. 58

rice. 58 3/4 B* = B*(t) fig. 59

Let us represent the function B* = B* (t) in the form of a Fourier series, decomposing it into harmonics, the frequencies of which are multiples of the rotor speed ω

μ rot

It is not difficult to show that the first three terms in this expression are equal to zero, therefore:

Let us depict this vortex electric field taking into account the signs of the SMP of the roller: it has a toroidal structure ( Fig. 60a

Applying the div operation to (24.4), we have:

Because

, we get

rice. 61a (24.6) fig. 616

Note that along the diameter of the roller, located perpendicular to its cut, both components of the electric field are directed equally and enhance the polarization of the roller ( Fig. 606

).
E0 (24.5) E (24.6)
we calculate the time derivative of the potential vector

Because

, we have E0 M2 Fig. 62

hundreds of thousands of revolutions per second. rice. 60 1 5 3 7 1 5 fig. 59 3 7 pic. 57 µ(ω) fig. 59 pics 57a fig. 63 Consequently, we can conclude that the electrodynamic system exchanges energy with the ether in two ways: 1) due to the SMP during the forward motion of its elements; 2) due to the vortex magnetic field during the rotational movement of its elements.

It is this angular velocity that should be used in formulas
(24.5)
and
(24.6)
in relation to Searle’s construction:

In addition, in a multi-row design, the angular speeds ω1 of the rollers increase with increasing section radius. For example, with R/r= 4 we have:

pic 54 pics 55 4 pics. 54a N. Tesla Demina P.Zh. Gubera 50s 1000 R. Milroy ... Second experiment of Tomilin A.K. and Asylkanova G.E. .

Generator circuit diagram

References:
54. Gurevich A.G. Magnetism at ultrahigh frequencies. Soros educational magazine. No. 1, 1999.- pp. 98-104. 71. Demin P. The Huber effect and flying saucers// Science and Life, 1991, No. 7.- P. 21-23. 72.Voronkov S.S. General dynamics. - Pskov: Quadrant, 2008. - 155 p. 73. Polivanov K.M., Netushil A.V., Tatarinova N.V. Electromechanical Huber effect // Electricity, 1973. No. 8 p. 72-76.

See also: Tomilin about the Roshchin-Godin Converter.

<<back

Is it possible to do it yourself?

There are videos, as well as tips from craftsmen who have tried to recreate John Searle's engine at home. Some researchers glued generator rollers, for example, from several flat magnets, wrapping them with a nylon gasket and putting an aluminum ring on each of them.

To make a magnetic ring stator when assembling a Searle engine with their own hands, craftsmen used ordinary Chinese permanent ring magnets 200x110x20 mm. Such elements were simply installed on top of each other. Next, the magnets were placed on a piece of plywood inside a metal sleeve and filled with epoxy. Also, according to the researchers, the stator of the Searle generator is easily made from a large number of permanent disk magnets that need to be placed in a ring of the required diameter. As some craftsmen note, the generators they assemble actually work and demonstrate the ability to self-spin and even form a cold zone.

One of the ways to assemble a Searle engine with a circuit is presented, for example, in the video below.

Working conditions

People who decide to make such an engine with their own hands, among other things, should have an idea of the rules for assembling it. Such a generator will only operate under the following conditions:

in the presence of at least two magnetic fields;
with the relative rotation of these fields or magnets;
in the presence of zones of rarefaction and contraction in the area of interaction of magnetic fields;
if at least one of the two magnets is discrete.

A primary external impulse during the operation of any magnetic generators, including Searle, is a mandatory condition.

CONFIGURATION OF MAGNETIC FIELDS

As a result of the magnetization process by a combined constant and alternating magnetic field, each magnet acquires a characteristic magnetic pattern located on two annular tracks and consisting of many north and south poles, as shown in Fig. 4 .

Measurements showed that the poles were evenly spaced at a distance of approximately 1 mm . It was also discovered that the density of poles per unit circumference should be a constant value characteristic of a given generator.

where: N(p) is the number of poles on the base track, N(r) is the number of poles on the roller track.