How to sew a Hawaiian skirt with your own hands: a detailed master class, many simple design options

Home House and cottage Do it yourself

Any Hawaiian-style party is a world of fiery music, a sea of ​​bright colors, juicy fruits and exotic outfits. Not a single party in this style is complete without Hawaiian skirts, necessary for performing the national dance “hula”.

A real Hawaiian skirt is a full flowing skirt made from long palm fibers. Such an unusual national outfit can be made from simple materials or traditional substitutes for thin palm fibers - shiny Christmas tree tinsel, multi-colored ribbons and garbage bags. This is where there is room for your restless imagination to fly. You can create different variations of images with Pau and Hula, first you need to decide on the necessary materials.

Various options

Every Hawaiian girl has fluffy, bright skirts that differ from each other in some individual characteristics. For example, Hawaiian outfits might look like this:

• With side seam and voluminous elastic at the waist;
• Various fastening options;
• Large elastic band in several rows;
• Tightly tied cord.

The advantage of a skirt is that it can not only be easily made, but also be adjusted to any figure. You can control its length, make it more voluminous, tight-fitting or curvy.

To complement your summer themed party look, purchase a matching top, swimsuit bra, or short tank top. Don't forget about the beautiful neck wreath made of synthetic flowers, an exotic hair decoration.

Types of Hawaiian Skirts

Hawaiian girls who respect themselves have different types of skirts. All have small design features.

Such outfits may include:

• Side seam and elastic waist;
• Various fasteners;
• Elastic band in several rows;
• Tightly tied drawstring.

Such skirts are good not only because they are easy to make, but also because they can be adjusted to any figure. The length and volume can be adjusted, it can become tight-fitting or very fluffy.

Important! Of course, the look should be complemented with a suitable top, T-shirt or swimsuit bra. Hair is usually decorated with flowers, and an exotic wreath is hung around the neck.

Raffia skirt

So, how to make a Hawaiian skirt with your own hands? To do this, you can use bright green raffia - a straw that imitates palm foliage.

Important! Most often, the length of such a skirt is below the knee, even to the ankle level.

To make it, you will need some simple supplies. You need to get:

• Packing tapes;
• Rafiei;
• Scraps of fabric;
• Strips of colored paper;
• Christmas tree rain;
• Elastic band for the belt.

Important! For a complete look, garlands of artificial flowers are attached to the wrists, ankles, neck and waist.

So, to make a spectacular DIY Hawaiian skirt:

1. The raffia is folded in half and the required length is measured.
2. Then the fold is applied to the elastic, the end of the material is passed through the loop and it is tightened.
3. Each workpiece is tied in this way. In this case, the loops need to be moved so that the skirt turns out fluffy.
4. With more raffia, the hem will be more voluminous.
5. Then the resulting fringe is tied around the waist, the ends of the elastic are tied.
6. As a result, both the elastic band and the knot will be hidden under a belt of leaves or flowers.

Paper skirt

Raffia is not so easy to find, so many people are interested in how to make a skirt from corrugated paper. It is sold in rolls, which are quite inexpensive. Be sure to buy paper of several colors.

1. The paper is cut into strips. The length of the strips should be the same.

1. Then the strips are folded in half.
2. An elastic band is tied separately and secured to the chair for convenience.
3. The stripes are tied with a simple knot with an elastic band.
4. Once all the strips have been secured, the elastic is secured with a strong knot.
5. You can use flowers to decorate the belt.

A few hours of work, and you are the owner of a bright skirt, in which you would not be ashamed to appear at a Hawaiian party.

Important! To avoid awkward situations, you should protect yourself a little by wearing a second skirt or short shorts under such a skirt.

Garbage bag skirt

Or you can choose a budget option altogether. We'll talk about how to make a skirt from garbage bags. When we throw them into the bin, we don’t even think about the fact that the bag is a great option for an unusual outfit.

So, you will need to acquire:

• Garbage bags;
• Scissors;
• Scotch tape;
• Rubber band.

The step-by-step algorithm is very simple and even a seamstress without experience can do it:

1. We take garbage bags without handles, five of them. You should choose the brightest colors.
2. The bags are folded together and the bottom part is cut off.

Important! It is necessary to ensure that the bags do not move when trimmed.

1. We measure 15 cm on one side of the polyethylene pipe and mark it with chalk. We make cuts along this length along the entire circumference of the bags. The result will be fringe, and on all packages at once.
2. The package located on top is carefully moved down five centimeters and secured with narrow tape.
3. The procedure is repeated with all other packages. Moreover, the next step is moving two packages, and then three at once.
4. After securing all levels of the bags with tape, the skirt is turned right side out.
5. The elastic band is cut to a length equal to the waist circumference, then its ends are sewn together.
6. The elastic is applied to the edge of the resulting skirt, wrapped a little in film and secured with tape.

The resulting skirt should be tried on and its length adjusted using scissors.

Or you can do it a little differently:

1. The roll of bags is cut into strips 3-4 cm wide. All of them are tied at the ends and wound into one ball.
2. Using a crochet hook, a chain is knitted around the waist.
3. Next, approximately 4-5 cm is knitted in a single stitch.
4. In each row, loops are added, three at a time. The fabric is knitted tightly over a length of 10 cm. You can use double stitches or another pattern that you like.
5. The skirt is knitted in the round, adding stitches until the required length is reached.

Important! This option is quite suitable for knitting handbags, vases and much more.

Or you can go another way:

1. Place the cocktail straw into the bag and secure it tightly with a rubber band.
2. The bag is inflated through the tube, then it is pulled out. The result will be a kind of inflated balloon. You need about two dozen of them, the sizes should be different.
3. The underskirt can be made from any fabric. The most important thing is that its color should match the packages.
4. The balls are attached using threads, pins or a stapler. Small balls should be on top, large ones on the bottom.

Required materials

To create such an original skirt, we will need:

• Garbage bags of different colors;
• Gift ribbons for packaging;
• Fatin;
• Green grass, which can be found in a florist shop;
• Colored satin ribbons;
• A roll of brightly colored corrugated paper;
• Catchy serpentine.

A Hawaii-style party skirt can be made from fabric with an exotic print - palm trees, large flowers, parrots; the length of the future product is determined according to individual measurements. The main thing is that the created masterpiece does not hinder movement during the rhythmic dance.

How to make a Hawaiian skirt video

The only thing that will be bright and unique is a Hawaiian party for which all the paraphernalia is made with your own hands. Then, in addition to lazily sipping sweet cocktails, it will be possible to exchange interesting hand-made clothes and accessories, in particular skirts.

The latter is made perfectly from literally any available material, starting with multi-colored garbage bags, and ending with tulle, raffia, various sizes of satin ribbons and corrugated paper with serpentine. In addition, a specific Hawaiian costume can be made using summer fabric with an exotic print depicting parrots, palm trees, unusual flowers and plants.

• Execution options
• Making crafts from garbage bags
• Raffia and tulle outfit
• Reviews and comments

Chic look with Pau

Hawaiian girls love to wear pau skirts. These are such original outfits, distinguished by the following signs:

• High elasticated waist;
• Various fastening options;
• Several rows of thick elastic;
• Tightly tied with a cord.

The Pau skirt can be made short, barely covering the hips, or long. There are many options, among them you can choose a model of optimal length that suits your figure. A short top, T-shirt or swimsuit top will be a great addition to this skirt. You can transform your hairstyle with a catchy exotic flower.

Hawaiian hula image

The Hula skirt is a complete imitation of palm leaves and is made from bright green raffia straw. The length of this national costume is just above the knee or to the ankles. Making such a skirt yourself is very easy. For this you will need:

• Green raffia grass;
• Thin strips of paper or fabric;
• Regular Christmas tree rain;
• Packing tapes;
• Thick elastic band.

Catchy garlands collected from fresh flowers will give the image a logical completeness. You can decorate your hair with a catchy flower or a wreath of fresh flowers.

Useful tips

• A bright Hawaiian skirt can be complemented by a swimsuit, a wreath or a large flower bud on the head.
• When creating a skirt from garbage bags, use green items. This way you can achieve a complete imitation of palm leaves.
• When making a product from satin or tulle, you can combine materials of several shades . For example, a combination of yellow, orange and green will help create an exact copy of the original outfit.
• When working with Christmas tree rain, you can use durable nylon threads of a bright palette as additional material.
• Many girls complement the floral belt with artificial grass. You can buy this in specialized handicraft stores. The grass is attached to the rim using glue.
• By analogy, you can make an addition to the skirt: a short bright top decorated with flowers. You will get a full-fledged Hawaiian outfit.

Carnival celebrations and parties are often accompanied by colorful costumes and outfits. Among the diversity, the Hawaiian-style celebration stands out. It is ideal for a disco with dance music, popular cocktails, interesting competitions and colorful costumes. With a little imagination and effort, every girl can stand out with a fluffy and original Hawaiian skirt.

How to make a skirt from garbage bags without sewing?

To prepare a skirt for a beach party, you will need the following materials:

• Multi-colored plastic garbage bags;
• Durable nylon threads;
• Synthetic ropes;
• Raffia;
• Scissors;
• Stationery stapler;
• Scotch.

You need to collect several bags with green and white ties, these will be very similar to the original material. You need to attach the bag to your waist and measure the required distance, cut it off. Then we cut the resulting length into thin strips to the level of the ties. If you want to get a full skirt, you can cut several layers of such a skirt. After which the cut bags are fastened with a stapler. The finished product is put on and fixed on the hips.

Which garbage bags to choose for a skirt

Considering the features of this product, it is impossible to say for sure what exactly is suitable. It all depends on your imagination and sense of taste. It's up to you to decide what kind of skirt you'll get. You choose the color, size, additional patterns and straps yourself. But there are still a number of requirements and recommendations that should definitely be followed:

• The bags must be dense; bags that can withstand up to 100–120 kg are suitable for this.
• It is best to choose the size according to your parameters. It's better to take more.
• Use different colors, it will look better.
• If necessary, you can purchase bags with a tie top. This will be very convenient for tying on a belt.

IMPORTANT! Of course, we are talking about clean plastic bags, not old used bags.

If you are seriously thinking about this option, then look at hardware stores for the necessary materials and do not forget to purchase the missing parts and tools.

How many garbage bags will be needed to make a skirt?

It is also impossible to say unambiguously about the quantity. You should not make a skirt from one bag, as it may be too transparent and could tear at any moment. This is not the most pleasant thing about the holiday. It is recommended to use 3-5 packages for the standard option . If you want to make it more luxurious or add more flowers, then, of course, you should use more bags. They may also be needed for decorative elements on the skirt itself. It's better to buy with a reserve just in case. Ten pieces should be enough, if there are any left over, you can make another skirt or use it for its intended purpose.

Crafting tools

Perhaps the main advantage of such a solution will be its cost-effectiveness, ease, speed of implementation and the use of ordinary tools that are available in every home. You will need:

• packages;
• ruler with pencil;
• scissors;
• transparent, colored and double-sided tape;
• rubber;
• pins.

If everything is ready, you can begin the main stage of work. We will share the fastest and easiest way to make a skirt. This style is called Hawaiian or Papuan skirt, since it is very reminiscent of their attire. Perfect for holidays, parties, matinees and for participation in costume shows.

Beautiful Hawaiian skirt made of bright colored paper and strong ropes

For this model you will need a strong rope, which will act as a belt, and colored paper. We cut the rope in such a way that we get 3 identical pieces. Then they are tightly fixed to each other, and they begin to knit a pigtail. It will serve as a strong belt. Find out the length of the skirt from the waist to the bottom. We cut the paper into thin strips of 1-2 cm, each strip should be 6 cm longer than the specified length of the skirt. The finished ribbons are connected into a pigtail, then tied with a strong knot. Eye-catching accessories – beads, bracelets – will help complement the model. Thanks to these clothes, the party will turn into a memorable event.

Making a Hawaiian skirt from catchy satin ribbons

You need to prepare the ribbons by cutting them in half. Then we make the skirt according to the following pattern:

• We carefully measure the waist, add 2 cm to the result obtained to freely tie the model;
• A ribbon of the required length or a festive serpentine is cut;
• Serpentine is fixed with tape to clothing;
• We repeat these steps until a sufficient amount of tape is obtained;
• The finished product is tied around the waist;
• Let's try on the finished accessory.

Sweet Hawaiian Tulle Skirt

For this purpose, a fabric of a light green tone and an elastic band of a similar color are selected. We cut the tulle in the desired direction, the length of the ribbon should be at least 15 cm. Each ribbon is folded in half, then tightly tied with a knot. We fix the elastic band tightly into the ring. We string chopped tulle onto it. We tie all the ribbons to an elastic band. We place the knots inside the elastic so that they are less noticeable.

The same cute skirt can be made from raffia, a fiber from the Madagascar palm tree. The basis should be a pastel or light green tone. Many people use an artificial analogue of raffia fibers for this purpose, since it is inexpensive and looks no worse than the original. The ideal model would be a skirt that tightly covers the hips.

Hula made of tulle

It is better to purchase tulle in green color so that it resembles palm leaves. When purchasing, please note that tulle varies in texture. There is quite hard material. This one won't suit you. It will stick out ridiculously and prick your legs. If you don't want to walk around scratching yourself at a party, then choose a soft fabric that lays nicely.

Stages of work

1. So, let's start by taking a wide elastic band. Its length should correspond to your waist size. Let's sew it up.
2. Now let's decide on the length of the Hawaiian skirt. We cut strips 15 cm wide. The length is the number multiplied by two, plus six centimeters for the ties.
3. We take the blanks and tie them around the elastic band. Make sure all strips are at the same level. At the end, you can trim the length with scissors.

A simple master class on creating a Hawaiian skirt

First you need to select all the required materials. If you want a full skirt, you will need palm fibers, which you can order online. You can take bright cellophane bags or corrugated paper. To make the skirt bright, you can use several tones. Then you need a strong elastic band for the base of the skirt. Let's calculate the length of the strips and start cutting them.

We fix the elastic band on the chair, then we tie strips onto it, tying them with a simple knot. After fixing all the strips, we tie the elastic band with a strong knot. As a result, you will have a wonderful skirt that you won’t be ashamed to wear at any beach party. The skirt will appear fuller if the strips are cut thinner. At the same time, it is important not to make a mistake with the length of the cuts - for adults they are longer, for children they are shorter.

Women's images

For women, in addition to swimsuits and their favorite summer sundresses, we recommend wearing a Hawaiian costume - hula. This is a short top and a full skirt made of palm fibers. If with the “top” everything is transparent, then with the “bottom” it’s not entirely clear. Where to get palm trees, how to glue them and will it be convenient?

Don't worry, the skirt can be made from different materials at home. We'll tell you how!

Adorable Hawaiian paper bag skirt

To create this skirt you will need a paper bag. We cut it right down to the bottom along the seam line, cut off the bottom. We place the cut package vertically, and the drawings and inscriptions should be on the inside. Using a ruler, measure 5 cm from its edge and make a line. Unfold the package so that the line remains on the right, then draw another line along the entire package, retreating 1.35 cm from the top edge. Draw lines 1.5 cm thick to the end of the bag.

We cut all the vertical lines without touching the horizontal one. If you plan to use several bags to give the skirt more fullness, then you need to repeat all the steps with the second bag. Wrap the rope around the waist, leaving 40 cm for tying a bow. After measuring, remove the rope and glue it to the cut bag, hiding the rope with paper, bending it in half at the waist line. Tie the skirt with a bow at the waist. Our paper version of the skirt is ready.

Skirt made of household polyethylene threads

For this model we will need:

• 3-4 skeins of household thread;
• Scissors;
• Satin ribbon for the waist.

First, you need to clarify the length of the future skirt, multiply it by 2, since you will be folding the thread in half. To make the threads even and neat, you can wrap them around the legs of two stools, cut them in half, and an even piece of thread will come out. We take a piece of tape of the required length, measure it for the waist, and fasten the ends together.

We also wind the tape around the legs of the stool, then string 3 threads onto the tape, tying them with a knot. The thread is quite rigid and slippery, so it is better to tie them in 3 pieces. You can tie artificial flowers to a separate ribbon for decoration and secure them at the waist. The Hawaiian skirt is ready to delight you and those around you at the party.

Step-by-step instruction

The process for working with these options is identical.

From Christmas tree rain

First, let's make a skirt from a Christmas tree decoration.

New Year's rain consists of thin bright threads that are attached to a wide strip. Cut off this strip, leaving only shiny threads . Measure your waist size and cut off the required amount of elastic. We sew the ends together using thread and needle. This elastic band will act as a fixation of the finished product at the waist.

The Hawaiian national skirt can have different lengths. They can be knee-length or floor-length. Using a sewing meter, measure the required length. It is recommended to trim the rain after assembling the skirt.

Let's start the creation process.

Fold one ribbon and tie it into a tight knot on the wrong side of the elastic. We fasten all the threads in the same way. It is recommended to choose rain in bright colors with a shiny texture: green, blue, yellow, silver.

Tip : to add fluffiness to the skirt, the rain can be secured in several layers.

From fabric

Working with tulle or satin is completely identical. We cut long strips of the material, the width of which is about 10 centimeters . Using an elastic band, measure your waist circumference and cut it off. We sew the ends by hand. We fold the strips in half and tie a strong knot on the wrong side of the elastic.

Advice! For more comfortable work when tying, it is recommended to place an elastic band on the back of the chair.

You can leave one layer of ribbons. Then the skirt will allow you to slightly open your legs during fiery dances. For greater volume, add several layers of ribbons, tying them in the same way.

With floral belt

A bright decoration in the national style will be a belt of flowers at the waist. To do this you will need lush bright flowers and glue. The strap can be made as an additional decoration. To do this, buds are glued to an elastic band, the finished wreath is placed on the belt, at the base of the skirt. The buds themselves can also be glued to the skirt itself.

Making a Hawaiian skirt from Christmas tree rain

First you need to make a strong ribbon that will be the base of the skirt. Unnecessary belts, strong threads or rope are suitable as such. We wrap the base around the legs of the stool, since it is very convenient to fix and string the rain this way.

For the skirt we take a silver-yellow rain color so that it is similar to the original. We attach the raindrops to the base of the skirt, tying them with a knot. For splendor, you can add several layers. We tie the skirt with a strong knot. The rain skirt is short, above the knees.

Materials for production

Hawaiian skirts are easy to make.
When creating this wardrobe item, you can use almost any available materials. Many fashionistas, when preparing for the carnival, use maximum imagination, creating a skirt from the most unusual items. The basis for the skirt was a product made from palm leaves, from which girls in ancient times made clothes. Modern island residents use light, flowing fabrics that actively allow air to pass through and quickly absorb excess moisture.

The most popular are three creation options: from Christmas tree rain, tulle and satin ribbons.

Materials and tools:

• Christmas tree rain;
• tulle;
• atlas;
• rubber;
• needle;
• threads;
• scissors;
• sewing meter;
• artificial flowers.

After preparing the necessary materials, you can begin the process of creating a skirt.

Reference . Many needlewomen also use garbage bags or palm fiber - raffia - as material for the product.

Fabric party skirt

To do this, you need a piece of fabric; satin or other plain fabric will do; it is advisable to take 2 pieces of different colors and the same length. We measure the required length to the waist, the length of the skirt itself. We retreat 3 cm from the base of the skirt and begin to measure strips 1 cm wide and cut them.

You can make 2 such cuts for pomp, put them on top of each other, a strong elastic band is suitable as a base, which we will hide in the remaining fabric that is not cut at the waist, you can sew this place so that the elastic does not peek out, we will connect the ends of the skirt. Our festive skirt is ready.

Hawaiian skirts for girls

The process of making a skirt for a girl is similar to an adult model, only the parameters here will be different. You need to measure the length of the girl's skirt and waist width. Then you need to decide what material it will be made of. You can order raffia threads online or use regular trash bags in different colors.

We cut strips from the bags to the required length; for a small children's skirt it will take fewer bags than for an adult. After many strips have been cut, we tie an elastic band on the chair, tie strips of 2-3 pieces at once onto the elastic band, for splendor you can make more garbage bags. We put the skirt on the waist, fix the elastic with a knot or sew it firmly so that the seam is not visible.

How to make a Hawaiian skirt with your own hands

Even if you haven’t been able to visit the real Hawaii yet, you know for sure that these islands cannot be imagined without fiery music, unprecedented fruits, etc. And you started learning Hawaiian dances a month before the upcoming party!

The traditional Hawaiian hula dance cannot be performed without a special costume: a skirt made of raffia palm fibers, a short top and a bright flower in the hair.

But if a top and a flower can be found in your apartment, then such a skirt is unlikely to be lying around in your grandmother’s chest. But it’s very easy to make it yourself from scrap materials. It’s so simple that once you make one, you won’t even notice how they are for your entire company! By the way, in the Hawaiian Islands, the hula skirt is not only an item of women's wardrobe!

First you need to decide what your skirt will be made of: it can be Christmas tree tinsel or rain, artificial leaves, satin ribbons, fabric, film from old audio cassettes, paper or even bags.

Choose your skirt length. A short skirt is more suitable for a children's party, and a long, more feminine one for an adult party.

You will also need a wide elastic band for your belt and what you will use to fasten the materials: a needle and thread, glue or a stapler. Although you can do without them by making a Hawaiian skirt based on the “American” principle or a Tutu skirt.

Model made of synthetic ropes in natural beige color

To create such a model, you do not need a needle and thread. You need to get scissors and 3 m rope, and also buy a couple of skeins of synthetic rope. We cut the strong rope for the base of the skirt into 3 equal parts, connect them first, and begin to weave a braid, which will be our belt. We fix the ropes onto the finished belt; first cut them to the same length.

If the rope in rolls is too thick, you can divide it into small fibers, so the skirt will appear fuller.

After all the ropes are strung, you can connect the skirt at the waist and get ready for your fiery party.

An interesting version of a skirt made of serpentine, satin ribbons and paper

A belt for the skirt is made from a satin ribbon, which will hold all the threads. Thin pieces of serpentine are fixed to it with a stapler or by tying a knot. The splendor of the model can be adjusted by increasing or decreasing the number of paper strips.

You can also make a product from rope and colored paper. To do this, we cut the rope into 3 identical parts, weave a braid from it, onto which we will string cut strips of paper. We must ensure that their thickness is not more than 1 cm. We also fix them to the base using a stapler or tape.

Making leis

To do this we will need colored corrugated paper in a tube, a needle, thread, scissors, a pencil and a ruler. Leis can be one color, or perhaps alternating different colors:

1. The paper is cut into strips, the width of which is 5-7 cm. The paper does not unfold.

Important! Don’t worry about small errors of a few millimeters; in the end, they won’t be noticeable.

1. A large thread is measured, the length of which should be slightly larger than the lei, and a large knot is tied at the end.
2. The first strip is sewn with small stitches. When the needle is filled with folds, you need to stretch the paper along the thread to the knot and twist it in a spiral.
3. Next, the procedure is repeated with all strips of paper.

One roll is enough to make one lei.

Important! Leave some loose thread. It will not be noticeable, but wearing the beads will be much more convenient.

An original idea to make a skirt from film from old audio cassettes

There are some old cassettes left, don’t rush to throw them away, give them a second chance by making such an original product. This option for creating a skirt is the simplest and fastest, since you do not need to cut strips, you have ready-made material - cassette film. You can use a rope, an old belt or an elastic band as a belt.

For convenience, we pull an elastic band of the required length onto a stool or behind the back of a chair, begin to string and secure the film with a knot, cut it to the required length, and try to ensure that the length is the same. We tightly connect the ends of the skirt on the hips, for pomp, do not spare the film, string it more, you can wear short shorts under the bottom.

Raffia product

For needlewomen, this material will make the most beautiful Hawaiian skirt that looks like an authentic version. Raffia is a natural palm fiber or its imitation. From time immemorial, skirts have been made from almost the same raw materials in Hawaii. You can choose the artificial option. It is cheaper and looks more magnificent.

Let's start with the fact that you can wear shorts or a short skirt under this thing. This can be done by modest girls who are not ready to expose their bodies. Choose the item that you will wear underneath in the same color as the skirt. This way she won't be conspicuous.

The raffia hula skirt is made in the same way as all previous options. You can do this thing in 20 minutes. Don't forget about the original decor. You can attach a bow made of the same material to your belt, or attach a flower garland.

Mandatory additions to the skirt

To create the look of a Hawaiian girl, you will need the following accessories:

• A wreath of synthetic flowers or a necklace with voluminous beads;
• Artificial flower in hair;
• Stylish top, swimsuit top or tank top;
• Loose hair;
• Radiant smile.

Such products are rarely worn by Hawaiian girls; they are used at holidays and carnivals. Currently, fabric models made like the long skirts of Hawaiian girls are widely used.

Our master classes will help you create your own original skirt, in which you will shine at a party on the seashore, surrounded by people close to you. All that remains is to choose the materials from which it will be made and the shape. You shouldn’t focus your attention solely on your own appearance; you need to remember that the main thing in a Hawaiian girl is a great mood and a radiant smile that illuminates everything around.

Even if you didn’t manage to make such a skirt the first time, don’t be upset that you didn’t succeed, because making such a model is not that expensive. In a similar style, you can organize various parties, for example, your daughter’s birthday will be unforgettable if you organize it in the Hawaiian style, and for your princess you make such a skirt with your own hands, the beauty of which she will definitely appreciate.

Hawaiian Party: DIY Costumes

Before you start preparing any themed party, in this case it is Hawaiian, thoroughly study:

• geographical location (volcanic Hawaiian islands), climate (hot tropical), characteristic features (the capital of delightful orchids);
• take educational online video tours of the Hawaiian islands (plunge into the exotic world to better understand what exactly you want from your event);
• study national costumes, as well as unusual traditional accessories.

After exploring the life of the islands, prepare everything you need. You will need: - colorful fabric pieces, ribbons, corrugated paper; - scissors; - centimeter; - old clothes with floral designs or variegated colors; - beads, beads, fishing line; - creativity and inexhaustible imagination.

Gather a team of assistants, involving relatives and those invited to the party in the preparation. Start sewing suits in advance so that you can add or alter them.

Hawaii themed party costumes. We do everything with our own hands

1. Men's "Hawaiian"

The men are wearing a Hawaiian shirt. The girl is wearing a pareo skirt

The popular Hawaiian shirt (the so-called “Hawaiian”) will not cause any special problems when searching. Many who visit seaside resorts have them. If there is none, you can make it yourself:

Method 1. Take a plain old shirt (preferably a bright color), come up with a future design (the obligatory presence of palm trees, the sun, flowers). Build future elements from scraps of fabric and sew them in a chaotic order onto the shirt;

Method 2. Borrow elements from old unwanted items with an appropriate nautical theme. Here you can cut out palm trees, the sun, ships in finished form, and use them as stripes.

The bottom part of clothing is shorts, everyone has trousers. It would be great if these were fabric summer shorts.

2. Hawaiian skirt

There are countless options for a creative approach here. You will need:

• elastic band - the basis for a skirt belt or a ribbon tie;
• the skirt can be made from multi-colored ribbons, pieces of fabric, Christmas tree rain, thick threads (raffia), knitting yarn;
• A delightful rustling skirt can be made from ordinary bags that just need to be cut into thin ribbons and connected to each other.

The main thing is that these elements are long enough and strong enough. You can attach them to your belt in the following ways: sew, glue, use a stapler, tie.

Skirt made from bags - fast, cheap and beautiful

1. Hawaiian native costume made of polypropylene twine. 2. Skirt made of thread with fringe

3. Summer version of the pareo skirt

If you haven’t purchased such a popular attribute at the resort, try making it yourself:

• mark the length with a centimeter (usually to the bones of the legs),
• find or ask your friends for a thin transparent fabric;
• draw a square with sides equal to the length of the pareo and cut it off.

Instead of a pareo, use a thin scarf or a rectangular chiffon scarf, but of sufficient width (with the ability to tie it at the waist).

Men can also use a pareo. These could be pieces of towels (preferably nautical themed), fabrics with a colorful print.

4. Hawaiian style bodices

You don’t have to buy expensive underwear; you can take a swimsuit top, top, or a piece of underwear itself. We use the same techniques as when creating a lei:

• Cut out the outlines of flowers from corrugated paper or variegated fabric. Layer one on top of the other to imitate fullness and richness;
• buy artificial buds;
• try decorating the bodice with large beads and ribbons, which will also make good jewelry.