Lodgment: types, selection rules, how to make it yourself

A cradle is a substrate, in the form of an insert, or a stand for fixing any product or workpiece. Can be made of different materials and made for different purposes. The most common use of trays is to keep the packaged cargo intact during transportation or simply storage. All fragile materials, modern electronics, optics, jewelry and many other goods today are transported using cradles.

But the preserved function of the cradle is not the only one. They are also used for demonstration and advertising purposes: a product wrapped in a special backing often looks much more attractive and respectable.

Cradles are most often made from:

• foamed polyethylene (often called “isolon”)
• foam rubber
• cardboard
• foam plastic

The process of making a cradle involves cutting out a contour that repeats the overall shape of an object, projected onto a plane.

With the advent of laser cutting on a CNC machine, the process of making holders for most products has become much cheaper and faster. The materials from which the supports are made are usually very soft and easily deformable, therefore they do not always lend themselves well to the mechanical process. In addition, when mechanical cutting you need to constantly monitor the sharpness of the cutting tool, which constantly becomes dull.

But the laser beam in this case has become a universal cutting tool, since it does not have a mechanical effect on the material. At the same time, cutting can be done of almost any complexity and at good speed.

In addition, modern mechanical cutting machines are several times more expensive than laser machines.

When cutting the above sheet materials with a laser beam, you need to correctly configure the equipment depending on the thickness of the material. The material for making lodgements is supplied in sheets and has an average thickness of 5 to 100 mm. Depending on the thickness of the sheet, the cutting speed and power of the laser beam, as well as the optical lens, are selected.

How to make a weapon cradle in a case

Types of drainage.
Drainage for a flower Drainage most often refers to the removal of water from the surface of the soil or from underground sources. It can be either natural or artificial. Drainage is the removal of storm or groundwater for the purpose of...

Law Certificates - what is it? Types of certificates. Issuance of certificates

Certification refers to actions aimed at obtaining confirmation of the declared quality of goods or services, in accordance with established standards and requirements. After conducting them and receiving a positive assessment, the issue…

Health What is surgery? Types and stages of surgical operations

The concept of “surgical operation” is a Greek expression adapted to the Russian language, which literally means “I do it with my hand.” Many years have passed since the times of ancient Greece, and today...

DIY tool trays

Author on Youtube: Eugene Irimia

Number of views on Youtube 869.2K

DOWNLOAD One of the tool storage systems available for making at home. Materials: 1. Base - polyethylene foam 2. Glue -

Comments for this video:

The story of one task: how a fluffy cat was cut - Watch/download⇒ “Do you know how long it will take a cat to grow new hair? Same thing. This is not for you to cut off stubble with a machine...”Added - LADY BUG AND SUPER CAT Season 2 Episode 5 Russian dubbing full episode clear sound. — Watch/download ⇒ “thank you” Added — The most successful recipe for pancakes (pancakes) with kefir — Watch/download ⇒ “I used to cook pancakes with milk, because now Maslenitsa decided to try something new and cook pancakes with kefir. I tried to cook according to this recipe, and indeed the pancakes turned out delicate and tasty, and surprisingly the first pancake turned out well, and not lumpy as usual.. Thanks to Alena Mitrofanova for this recipe. “Added - TV series Matchmakers 4 (4th season, 1st episode) comedy for the whole family - Watch/download⇒ “Such a cool TV series Matchmakers! Very kind and positive! When I'm sad, I always turn it on and it 100% lifts my spirits!

Manufacturing of lodgements

We value clients who return to us with new projects and give them discounts for continued cooperation. Departure to the client. We value our clients' time. We provide consultations on their territory, bring product samples, and promptly resolve any issues that arise.

Select and buy tool holders

We will develop packaging from scratch or according to your specifications for free. We have our own staff of engineers and technologists who will help you make a packaging drawing. According to your packaging drawing.

According to your product drawing. By the product itself. Send or bring us your product, we will take all the necessary dimensions and prepare drawings. Based on a hand drawing and photo of the product. Send photos and product parameters and our engineers and technologists will develop the packaging for you.

For clarity, here is a video on how to make a cradle yourself:

Order packaging development. Free sample for testing We make a sample tool holder with every order. Our clients have the opportunity to check the properties of future packaging before launching the main batch. They test it in the field and give their comments. If it is necessary to make minor changes to the packaging drawing and sample, we make them, and only after that we begin production.

For more information, please contact the managers. Everything is chewed down to the smallest detail. A very relevant topic.

Bayonet connector with quick fixation: what is it, description, drawings

In order for the supports on any trailer to give the desired effect, you need to carry out preparatory work with them.

Specifics:

• Make a flatbed trailer. It has a dump truck function.
• If working alone, you can install a winch. It is she who will help drag the swimming vessel onto the car.
• To immerse in water, you need to prepare lanterns in advance.
• Although the wheel hubs are sealed, with weekly use the shelf life is reduced to one season. Therefore, bearings need to be changed regularly.

If everything is done correctly, then loading and unloading operations will take place without any force majeure.

Plywood tool box

The edged board can be replaced with ten-millimeter moisture-resistant plywood. This material is more durable with less weight and thickness. However, making plywood boxes requires certain skills.

PHOTO: bestdiy.ru Scheme for making a tool box from plywood with your own hands

Materials and tools

Making a tool box will require the following materials and tools:

• plywood 10-12 mm;
• wood glue;
• wood screws or universal 15×2.5 mm or nails 20-25 mm;
• wood varnish;
• a jigsaw with a variable ski position (some of the cuts must be made at an angle of 45º);
• Phillips screwdriver or hammer;
• drill with a set of wood drills;
• clamps.

How to Make a Sturdy and Functional Jewelry Packaging Box

A box for decoration must be multi-functional. It doesn’t get wrinkled during shipping (this is very important for me), it’s convenient for storing (long-term) jewelry. And the box itself shouldn’t take up much space. And for me, it also needs to be inexpensive, done quickly, and looks impressive. Be strong enough, paper will not work for this. The decorations are different and you need to quickly make a stencil for a specific decoration. The boxes turn out larger or smaller, higher or lower. If you glue one box for half a day, then the game is not worth the candle. I experimented for almost two months, tried a lot of boxes and other packaging. I am completely satisfied with this box. It's quick to make, inexpensive and looks presentable. So.

1. cardboard - I take double-sided, it just makes the inside look neater, and I like the texture better. I tried halogen cardboard, the glue stick doesn’t stick well, and PVA and Moment left stains on the surface. 2. foam rubber 1 cm thick (sold in furniture stores. For us, a roll of 1 m * 2 m costs 170 rubles) 3. Glue stick and moment gel or crystal (the main thing is that it is transparent). 4. Shiny, thin lining fabric. Twill would be ideal, but I couldn’t find it and bought the finest brocade, black and silver. 5. It’s better to take a metal ruler. 6. Well, how to draw the lines. I took a small hook with a rounded end (so as not to tear the paper). 7. And of course, a checkered piece of paper.

Let's attach the decoration to the piece of paper and determine what size box we need.

When we cut out the stencil, we cut off the corners a little, this will make it easier to glue.

Figures 6 and 7 show the sequence of gluing the box.

The top of the box should be 3 mm larger (in length and width) than the bottom. Of course, you can make a second stencil, but I make it easier.

As a result, the box is ready, all that remains is to glue the foam rubber.

I cut the foam right along the contour of the box. Inside, it should fit snugly against all walls.

We cut the lining fabric 1.5-2 cm larger than the foam. First glue the corners. And then the side parts. (Because if you glue the side parts right away, the corners turn out to be very sharp and elongated. And they bulge very ugly.)

Lubricate the bottom part of the glued foam rubber with glue and glue it to the box.

Use the same hook (back side) to stretch the fabric and tuck it in at the sides.

To glue the fabric to the foam rubber and to the box, I use Moment gel and not PVA because it dries much faster than PVA.
So a box can be made in 10-15 minutes, but if you wait until the PVA dries, it will take a long time. The box is ready. Features of the ring box. The box is made the same way, only when calculating the height of the box, we take into account that in the lower part there will be 2 layers of foam rubber.
Because with one layer, the ring simply will not hold on. Glue two layers of foam together and cut them in half (crosswise)

We cover the foam rubber with fabric and glue both halves to the bottom of the box. Usually, for a black box, I make the fabric black, it looks more impressive and neater. But for MK we had to make a light lining; nothing could be seen with black.

That's it, the box is ready.

A couple of times, for flat American strands, I cut out recesses in the foam rubber (bottom of the box) for the strand and draped it with fabric. It turns out very beautiful and convenient, the tourniquet does not hang around the box, but it takes a long time to make. In order to secure the decorations, I before. how to glue the bottom foam, insert laces to match the color of the fabric or decoration (if necessary). This is especially convenient if you have to send it by mail or wear it for demonstration to clients. I insert a cord into a large needle (for knitting, with a large eye) and thread it through the foam.

My favorite box size is 7 by 12 cm, height 2.5 cm. Just right for pendants. And one box is obtained from one A4 sheet. I think that even those who had no idea how to make boxes can now easily make beautiful packaging for their work. Good luck with your creativity.

Source

Production of lodgment

To learn more. Cradles for a set of tools. Presentation packaging made of chemically cross-linked PPE. Packaging for equipment with complex shapes.

Universal holder for the device in a plastic case. Photos of our products We have been developing and producing holders for various accessories, accessories and tools for more than 12 years. Our customers remain satisfied with our products and return with new projects. View more.

You can apply a logo or inscription. Production of polymer packaging. About the company News Our team Blog Contacts.

Development process. The client calls us directly or leaves a request on the website using the feedback form. The application is processed, after which our manager contacts him.

The manager advises.

Finds out the purpose, objectives of the packaging, wishes regarding its properties and qualities, budget and project deadlines. Selects the optimal type of polymer and production method. Design engineers are developing a drawing of the future packaging. Managers and technologists coordinate the production process. If the client has a ready-made packaging drawing, he sends it along with the request.

Then we produce packaging strictly according to the specifications.

We produce a test sample of packaging and deliver it to the client for testing. If necessary, we make small changes and then produce the entire batch of packaging. We ship and deliver packaging to the client in any city in Russia and the CIS. Clients and partners Our regular partners know that we have established production and logistics processes, and it is not in our nature to delay deliveries. We are glad that people and brands trust us.

For our part, we try to meet this level of responsibility.

Photos of the test cradle inside a metal box

Benefits of working with us. Our managers are always in touch, control the project at all stages of production, and, if necessary, involve other specialists.

Payment deferment. We understand that it is impossible to plan everything in the world, so we can adapt to the client’s wishes and give a deferred payment. More than 12 years on the market.

The accumulated experience has allowed our company’s specialists to become real experts in the production of all types of polymer packaging. Discounts for regular customers.

Wooden fasteners: designs, types, application features and installation options (90 photos)

Today, to install structures made from natural solids, in addition to conventional connections with nails, metal fasteners are used. With its help, carpentry work is simplified, which will make the construction process as fast as possible. Manufacturers offer a variety of fasteners for wooden structures.

The proposed types of fastening elements are produced in different parameters, which makes it possible to choose the dimensions of a specific structure.

Types of fasteners

The mounting plates are equipped with a huge number of holes for bolts or nails. They make it possible to make a high-quality connection of the necessary elements at the required angle. Mainly used when connecting parts in rafter trusses. Allows for installation directly on the construction site

Nail plates are produced by cutting through a sheet of aluminum to produce nail teeth with a single base. Installed exclusively in industrial areas.

Beam rafter fasteners allow you to connect wooden beams and rafters, that is, perpendicularly placed elements that rest on each other. For durable fastenings, it is advisable to arrange several fastenings not too symmetrically, turning one with a shelf in the opposite direction.

Sliding fasteners for wooden houses are used in the construction of structures from solid wood with natural moisture when it is necessary to arrange inclined rafters.

In this option, after shrinkage of the assembled log house, changes from the girder up to the mauerlat are not excluded. For this reason, rafters cannot be rigidly attached to the Mauerlat.

Supports for load-bearing parts make it possible to attach beams at an even angle to different parts of the structure being built.

If structures are considered part of the interior space, then the fasteners are installed almost unnoticed or the method of cutting parts is used. Such parts include a hidden type bracket.

Methods of fastening wood structures

Let's talk in more detail about the options for fastening to a wooden wall and other solid structures, and also find out which one gives an excellent result.

Traditional

This method involves installing parts into a groove using a hammer, nails or staples. Cutting out the required grooves negatively affects the load-bearing capacity of the nodes from the array.

It is difficult to estimate the forces applied to cutting staples or nails, since they were not calculated. Also, with this approach, uneven distribution of expected loads throughout the structure cannot be ruled out.

minimum wage

Fastening for solid structures, including wooden stairs, using MZP is, as a rule, only possible if there is a hydraulic press designed to connect the units of the entire structure. The beams being constructed are installed at a certain angle and then pressed together.

The disadvantage is that the structural parts of such a fastening must initially be assembled on the ground. Also, additional rafters have to be installed on the ground to maintain not only the level, but also the configuration.

Once all the parts have been assembled, the frame should be assembled, which requires special equipment.

Perforated mount

This fastening of wooden elements, including the ceiling, helps speed up the installation of structures. This type of fastening consists of brackets and corners of different sizes and thicknesses made of steel. These parts are manufactured according to the dimensions of the timber.

When fastening solid wood structures using perforated fastening, you cannot do without a hammer, nails, and screws.

A huge advantage is the ability to assemble the entire structure in parts. With this method, cutting or pre-cutting is not required.

Metal fastening for solid structures

Nowadays, during the construction and reconstruction of wooden structures, or rather, as a connection of the elements from which such structures are made, a certain fastening is used. As a rule, the connection of such fasteners is made at an angle; for this purpose, steel elements are used.

Thanks to the use of these elements, construction is much simpler. This mainly applies to the work of installing the roof frame, or the structure itself.

When using special fastening, there is no need to use nails or staples, which is why the period of construction work is reduced to a minimum.

There are several varieties of this fastening: plates and steel parts. All have holes for self-tapping screws. In addition to the large savings, it is important to note such important indicators as a reduction in the price of the design, a significant increase in productivity, but the quality of the products remains at the highest level.

Photos of wooden fasteners

Lodgment – ​​what is it?

The designation of the above term, according to the explanatory dictionary of the Russian language, is as follows: this is a cosmonaut’s seat, a small trench for sheltering infantry.

But in the modern world the word “lodgment” has another explanation. This is one of the various types of plastic packaging. It is used for the convenience of the client when consuming the product.

One of the most popular packaging all over the world is the blister. This category also includes transparent plastic packaging, blisters for alcoholic beverages, cassettes for seedlings, correxes and other types.

One of the most common and popular types of blister packaging is the above-mentioned tray. What's this? It is a kind of liner or an ordinary substrate, which has special recesses for product units. The tray is used to sort products in packaging.

It should be noted that the above packaging is similar to Correx. Even their production technology is the same. They are made using the vacuum forming method. But of course there is a difference. Correx is mainly used in the confectionery industry for sorting products. The lodgement has completely different, more extensive, areas of application.

Features of furniture fasteners: overview of popular hardware designs and options for their use

The modern furniture industry offers a huge number of new types of furniture fasteners. They help facilitate installation work on assembling furniture paraphernalia. In addition, they increase its durability.

For example, budget kitchen models made from fiberboard are more likely to be deformed and destroyed as a result of delamination of the top and side panels than furniture fasteners for chipboard and fiberboard material fail. This is due to the presence of high-quality products in the composition of the metal product.

Each type and model of fastener is designed for a specific type of work. They differ in size, color and shape.

Types of metal fasteners

The main purpose of furniture fasteners is to create a strong connection that adds strength to the furniture structure. Some types are used as point fixation, while others help create a kind of frame that will hold several elements together.

To date, several basic models of fasteners have been developed. These include:

• furniture corner. This element is designed to fasten two separate parts together. It helps to assemble all the parts into one design;
• confirmation These are ordinary bolts and screws for furniture paraphernalia;
• dowel It is a wooden retainer;
• screed;
• shelf holder;
• nuts and bolts.

Let's look at each category separately. The main characteristics of these parts will help you understand what these products are intended for.

Furniture corner

This model is available in two variations. Each of them differs in its size and the material from which it is made.

On sale are:

• plastic;
• metal corner.

This model belongs to hidden furniture fasteners. It is located on the inside of the piece of furniture. Plastic products are used for lightweight and suspended structures.

Most often, corners help hold a glass shelf or chipboard partition. The main disadvantage of such products is their fragility and disposable use.

Metal fastener options are intended for fixing large parts. Basically this is a wardrobe, chest of drawers, furniture corner. They fit tightly to both surfaces at the time of connection. The product contains durable aluminum alloys.

Confirmat

Manufacturers of furniture fasteners offer a large selection of self-tapping screws and screw nails to create a comfortable environment. There is no need to be particularly precise during the installation process. Metal screws can be easily tightened using a screwdriver or a screwdriver.

The most popular confirmations are products whose dimensions are 8 x 60 mm. This fastener model provides a super-strong connection between the parts. Iron parts can withstand great physical stress.

In addition to the advantages, there are a number of significant disadvantages. These include:

• during the fastening process, a mark from such fasteners remains on the surface of the furniture;
• These models are not recommended for use on fiberboard panels. Metal parts can greatly deform a wooden panel.

Dowel

This element can also be classified as a hidden type of fasteners. It is a wooden part that is fixed in the cavity of the snowstorm paraphernalia. It plays a connecting role for large parts. Specialized departments provide a detailed catalog of furniture fasteners.

The height of the product is from 30 to 35 mm. The diameter of the fastening element reaches up to 5 mm. To attach such a model, it is recommended to make shallow holes on two parts. Next, a wooden dowel is installed at one end. After this, the second hole is connected to the protruding part of the connecting part.

You can add strength using PVA glue. It dries quickly and promotes tight fixation of all parts to each other. A special adhesive composition has been developed for this purpose.

Ties

Today, specialized departments offer two types of metal screeds. These include:

• eccentric;
• intersectional.

The first model is used under factory assembly conditions. It is made of durable metal alloys. After fixation, the product becomes almost invisible. They are located deep inside the furniture structure.

The second type is an iron nut and bolt. They allow you to tighten two parts perpendicular to each other. Most often they are used to fasten a tabletop or the head of a sleeping bed. The photo of furniture fasteners shows modern types of parts.

Photos of furniture fasteners

Advertising tray

The above blister packaging is used mainly for an effective presentation of the product to a potential consumer. Advertising lodgment - what is it? It is actively used for the design of expensive goods and various promotions.

Experts note that if the product is packaged in such a blister, it will have a more attractive and original appearance, thanks to which it can attract the attention of many buyers and stimulate the purchase of this product. Agree, decor is the basis of any packaging

A creative approach to its design will help greatly to promote products.

The cradle in this case should emphasize the best and most effective aspects of the product. Since the technical side today is limitless, it becomes possible to implement the most interesting ideas and proposals.

The lodgment production method - vacuum forming - provides a good opportunity to create a wide variety of packaging configurations and reliefs. Combining it with a fairly wide selection of color shades allows you to achieve maximum efficiency.

Requirements for tool organizers

When choosing a finished product or materials and design for making a tool organizer with your own hands, you should consider some specific requirements:

1. The bottom, or better yet, the entire lower part of the box should be monolithic or have particularly reliable fastening connections. The product will have to withstand significant weight.
2. The base must be stable no matter how much the internal volume is loaded.
3. It is necessary to provide feet made of sponge rubber or other similar material so as not to damage the surface on which the box will be installed.
4. If the walls are made of elastic or deformable materials, they must have stiffening ribs so that when the box is fully loaded it does not change shape.
5. If there are moving elements: a folding system, closing doors, drawers, all transformations must occur without effort, including when the containers being moved are partially loaded.
6. The body of the box, as well as all its internal compartments and structural elements, must have no gaps. The lid should fit tightly and have additional fixation in the form of latches or locks.

Each of the materials used to make a tool box with your own hands is subject to stricter requirements for strength and wear resistance:

• wood, plywood - treated with antiseptic and fire-retardant impregnations or primers;
• metal - galvanized sheet is used or the product is painted with oil-based impact-resistant paints;
• polymers - impact-resistant plastic is used that can withstand a wide range of operating temperatures. As a rule, this is polyurethane, PVC, extruded or cross-linked polyethylene.

Car maintenance and repair: when to do it

For better glide, you need to select a support for a specific model of swimming apparatus.

The equipment should have a simple structure, and the insertion and stand processes should not be labor-intensive.

Regarding fastening:

• It's best to start with the trailer body.
• The trailer itself must be easily removable and have at least 2 supports 1.5 cm wide.
• “Strengths” must be installed in a horizontal position.
• The center of the boat's cylinder must coincide with the center of the cradle.
• Pressing the boat to the fastening element using 2 straps.

Such rules have been tested by time and by various loading workers. If everything is done correctly, the transportation will be without surprises or force majeure.

Regarding the transportation of PVC boats, you need to know the following aspects:

• A regular trailer requires a linoleum-shaped covering. To prevent damage.
• The presence of an awning provides additional fixation.
• The cradle must be transverse to the slings.

By the way, transporting a boat can be done in different ways:

• Keel up. Slings must be used. 2 for transverse mounting and 3 for longitudinal analogue.
• Keel down. Support - cylinders. Good fixation of the motor is required.

The presence of a sling makes it possible to attach the boat to the frame. And strong fixation is carried out with slings.

Loading and unloading on PVC boats with supports.

Tool box on wheels

The next project is much more difficult. To implement it, you will need a fairly expensive tool and a sufficient level of skills to work with it.

Tools:

• welding machine;
• Bulgarian;
• drill;

Materials:

• metal profile: equal-flange angle 30×30×2.5 mm – 6 m; square pipe 20×20×1.5 – 4 m; square pipe 15×15×1.5 – 6 m;
• plywood (10 mm) – sheet 1.5×2.0 m;
• aluminum profile (can be replaced with a CD profile for plasterboard): corner 50×20×2 mm – 6 m; n-profile 20×20×2 mm – 1m;
• furniture guides for drawers 45 cm – 3 pairs;
• rotating wheels – 4 pcs.;
• consumables: screws, bolts, paint.

1 of 4

What happened in the end

Video instruction of the manufacturing process:

Watch this video on YouTube

Why are they needed on a regular trailer?

Why do you need a boat cradle in a regular trailer?

There are several reasons:

• The main function is to assist in the transportation of a sailing vessel.
• Covering with carpet prevents friction on the bottom of the vessel. Guides on the frame provide additional fastening to the sides of the body.
• The installed wheels will help in case of force majeure in case of attaching a drawbar. The ship will be able to become an independent vehicle.
• Some models have wiring. It allows you to connect lighting equipment to a swimming vessel. In the dark, this is simply necessary.
• The submersible method is the basic method of loading a boat onto a structure.

The main advantage: a large support area. This means that the entire load of the transported vehicle is evenly distributed over the trailer. Consequently, the boat hull is practically not subject to deformation.

Transportation using cradles.

Cradles are guides. That is why the launching and loading process is quite simple and does not require outside forces and resources.

And besides, such additional fastenings can be used in any type of trailers and watercraft.

Pros: they take up little space when stored, suitable for almost any type of swimming transport.

DIY tool tray

No one can pass by, and after 15 minutes we are watching the next episode and laughing heartily with the whole family! The authors' imagination is limitless! This is cooler than any Brazilian TV series or American comedy! Lyudmila Artemyeva is our favorite actress))) “Added - Cherry pie with kefir Cherry pie simple recipe Recipe for pie with cherries. — Watch/download⇒ “Hello! Thank you for the recipe, everything really looks very simple, the set of ingredients is very accessible and the pie looks amazing) I was just looking for a juicy summer pie, and here is your recipe. I think you can also try making it with blackcurrant or plum, for those who like light sourness combined with sweetness. And as an option, you can roll the berries not in flour, but in powdered sugar, it will be even tastier! I just don’t understand why, after greasing the mold with butter, you also sprinkle it with flour? "Added -

home and family

DIY cradle

In general, the word logement is translated from French simply as “room”. Logical. In the storage area, such a substrate, an insert, becomes a “room” for a variety of items. The cradle reliably fixes objects, preventing them from falling out of storage even during transportation and in an upright position.

Of course, not only tools can be stored in such supports, which are usually placed at the bottom of a box, case or box, and mounted on the walls above the workbench. Gun safes are often equipped with holders; storing weapons in such a lock is safe and secure.

Most often, tool holders are included with them. A ready-made set of keys, screwdrivers with a variety of attachments, pliers and everything else that a home craftsman will need is sold in a holder. Each instrument has its own backing that is exactly the right size.

This is important to hold the item firmly.

Today, lodgements are most often made of foamed polyethylene. It is now widely used for packaging goods. The material is soft and yet quite strong.

However, lodgements are also made from plastic, wood, and plywood. At home, to create such a storage system, you can use foam rubber and wall insulation. Craftsmen advise painting the cut or extruded areas under the tool in a bright color so that it is immediately obvious that a Phillips screwdriver or a 16mm wrench is missing.

It can be difficult to choose a ready-made cradle if it does not come with a set of tools. What is important here is not only and not so much the material of manufacture, on which the price will depend, but the ideal dimensions of the recesses for specific tools. Therefore, home craftsmen often make trays to suit their own needs, for their own workshop.

The easiest way is to make a tray with your own hands from foamed polyethylene. The thickness of the sheet is selected individually - it is clear that for storing bolts and screws you can use thinner material, but for bulk tools you need a solid thickness for reliable fixation. For hand tools such as keys, pliers and screwdrivers, a sheet of polyethylene with a thickness of 10 centimeters will be sufficient. Each tool has its own hole cut out.

Home craftsmen even make trays from polyurethane foam. This is not a very attractive or practical method, but in general the substrate is reliable to use and quite durable. published econet.ru

If you have any questions on this topic, ask them to the experts and readers of our project here.

What are boat carriers?

So, what are boat racks for a flatbed trailer? This is specialized equipment for transporting an inflatable flat-bottomed PVC boat on a rack with a low awning on board.

External data:

• two wooden blocks;
• vertical carpet covering;
• fastening bolts.

For each such strong thing you need 3 pairs of bolts, plates and nuts. They are included with purchase. But the trunk and belts will have to be purchased additionally.

The length usually varies - the average size reaches 250 cm.

PVC boat trailer supports.

Classification of trailer vehicles:

• Single-axle - for transporting vehicles 1.5 tons and 6 m in length. They have coupling elements and brake lights.
• Biaxial - for transporting equipment 2.5 tons and 8.5 m in length. They have 2 axes for uniform movement.
• Three-axle - for a load of 3 tons and a length of 9 m. The speed of movement is not limited.
• Brake. Their weight is 7.5 tons. There are special winches and braking gear.
• Brakeless - small-sized designs.

Basic requirements: maximum cargo weight up to 750 kg, weight of supports up to 17 kg; The packaging dimensions in centimeters are 261*14*13, and the base coating material is galvanized steel.

Cradles allow you to transport the boat in such a way as not to damage its bottom or scratch the skin.