DIY mini tractor with Ural motorcycle engine (41 photos)
Homemade mini tractor with an engine from a Ural motorcycle: photo, description, video.
Craftsman Yuri Zhuravlev built a homemade 4x4 all-wheel drive tractor with an engine from a Ural motorcycle. The design of the tractor consists of an all-metal frame welded from 80 channels. The engine is from a Ural motorcycle, electric motors with fans for forced air flow of the heads are adapted to cool the cylinders, a VAZ starter is installed.
To reduce fuel consumption, a carburetor from an OKA car was installed on the engine. Tractor axles are shortened from VAZ, Moskvich gearbox. Steering wheel VAZ classic.
The minitractor additionally has a hydraulic system and a power take-off shaft, which allows the installation of a whole complex of home-made attachments: a milling cutter, a snow blade that is raised and lowered by a hydraulic cylinder.
The hydraulic system of the mini-tractor includes an NSh-10 pump, an oil filter, a hydraulic tank, a distributor, reinforced hoses, and hydraulic cylinders.
Torque is transmitted to the sprocket, and then to both axles.
The snow blade is raised and lowered using a hydraulic system.
Oil pump NSh-10.
A homemade milling cutter was made, the VAZ axle was taken as a basis and torque was transmitted from the PTO to it, and from the axle shafts through a chain drive directly to the milling cutter itself.
These videos show a homemade mini tractor in action:
Homemade author: Yuri Zhuravlev.
If you liked the homemade product, share it on social media. networks
avto-samodelkin.ru
Motor cultivator based on a chainsaw engine
To manufacture such a cultivator, engines are used, both from Soviet saws “Druzhba” or “Ural”, and from modern saws from foreign manufacturers. Together with the motor, a fuel tank, bevel gear and chainsaw controls are used.
The frame is made of a channel, pipes, as well as an angle for the engine and transmission mechanisms. The working bodies are often driven into rotation by a worm gearbox, the worm of which is driven either directly from the chainsaw gearbox, or through a belt or chain drive. A video on how to make a walk-behind tractor with a chainsaw is presented below.
The main disadvantage of this design is the lack of reverse gear and the possibility of changing the speed of rotation of the working bodies. It can be eliminated by adding a gearbox from a motorcycle or moped with a reverse mechanism.
As an alternative to a gasoline engine, 2-3 kW electric motors can be used for such walk-behind tractors for cultivating small garden plots.
tractor from a Ural motorcycle, how to make it yourself
Homemade mini tractors with a Ural engine are needed in a country house, in a vegetable garden or a small farm. There is no need to buy large-sized equipment, since it will not cover the cost of the tractor. But you can assemble a tractor yourself with an engine from an IZH motorcycle. A homemade tractor is usually small in size and is intended for plowing the garden, mowing grass, and transporting small loads, incl. root crops, garbage and firewood.
The engine from the IZH motorcycle has high power and performance and is excellent for agricultural work.
Homemade mini tractors
Below we will discuss how to make homemade mini tractors with a Ural engine. These types of homemade products are based on the use of an articulated or breakable frame. You need to attach a two-wheeled cart to the walk-behind tractor and install a steering system, which is based on the model’s 4-wheel drive.
A homemade mini tractor with a motor from the Urals is reliable and powerful, it has the following characteristics:
- The drive axle must be installed on the rear semi-frame.
- Checkpoint.
- Chain intermediate gearbox.
- Fuel tank.
- Facing.
- Fans installed above each cylinder, which allows you to use the tractor in hot weather and work on it for a long time.
How to make your own mini tractor with a motorcycle engine
The design of a homemade tractor with an engine from a Ural motorcycle is as follows.
The base consists of 2 half-frames forming a rectangle. The front part should measure 90x36 cm, and the back - 60x36 cm. You can weld the half-frames yourself using a steel channel. To properly join the channels, you need to cut the ends at an angle of 45º.
On the front half-frame you need to install 2 crossbars, which are made from a rectangular pipe. It should measure 5x3 cm and be laid flat. Cross members are needed to make a subframe for the engine.
A wall made of steel should be installed on the half-frame. Brackets and platforms intended for installation of components, mechanisms, and assemblies must be welded to the wall.
A stand is welded to the rear semi-frame, which can be made from a pipe. Hinges are attached to the stand. They are necessary for attaching attachments. A vertical plate required for the swivel assembly is mounted on the front of the rear half-frame. It is strengthened with scarves.
The lower half-frame is covered with a steel flooring, and a platform with gas and clutch pedals is welded onto it.
The frames are connected to each other by a fracture unit, which in structure is a hinge or cardan mechanism.
The IZh engine requires rigid and dependent suspensions, which will allow the installation of wheels of the required size. A do-it-yourself minitractor involves installing the engine on the crossbars of the front half-frame, which is then bolted through the eyes.
The gearbox is installed nearby, for which you need to use bolts. It is necessary to set the chain clutch correctly for the gearbox and gearbox to work well. On the first link of the gearbox, you can use a splined end, which is removed from the Moskich gearbox, and the second - from its driveshaft. The spline connection allows the rear shaft to be made significantly longer.
Next we will look at how to make homemade mini tractors. The steering column must also be placed on the frame, which must be firmly secured with bolts. A hole must be made in the bearing adjusting nut, which will allow the column to be connected to the steering wheel.
The engine will be started through an intermediate shaft, at one end of which a shortened kick starter is attached, and at the other - a rod.
The cylinders should be equipped with a forced cooling system. From an IZH or Ural motorcycle, a fuel tank, a motor pump, and an additional gearbox are used.
To make a homemade tractor with an engine from a Ural motorcycle, you need to make your own attachments using sheet steel. These parts should be lowered and raised using a special lever, which is installed on the right side of the operator’s seat. The lever should be no more than 55 cm long, which allows you to adjust the attachment.
The engine will be controlled by motorcycle cables, which will be launched by pedals installed on the platform.
The wheel size for a mini tractor should be the same with the parameters: 6.15x13 inches. You can take wheels from Moskvich, which drive well on the ground.
specmahina.ru
Homemade mini tractors
Below we will discuss how to make homemade mini tractors with a Ural engine. These types of homemade products are based on the use of an articulated or breakable frame. You need to attach a two-wheeled cart to the walk-behind tractor and install a steering system, which is based on the model’s 4-wheel drive.
A homemade mini tractor with a motor from the Urals is reliable and powerful, it has the following characteristics:
Mini-tractor with an engine from a Ural motorcycle
Dear visitors to the “Self-Made Friend” website, today we will look at step-by-step instructions for assembling a mini-tractor with an engine from a heavy Ural motorcycle created by Yuri Zhuravlev. Step-by-step photos of the MT assembly and a video are attached) This mini-tractor is all-wheel drive and has a 4x4 wheel arrangement, an all-metal frame welded from 80 channels. The engine is from a Ural motorcycle; to cool the cylinders, electric motors with fans are adapted for forced air flow of the heads, in this case a VAZ starter. As you know, the Ural engine is very voracious, so to reduce fuel consumption, a carburetor from the OKA Domestic car was installed. Tractor axles are shortened from VAZ, Moskvich gearbox. Classic steering.
The mini tractor additionally has a hydraulic system and a power take-off shaft (PTO), which allows you to mount a whole complex of homemade attachments: a milling cutter, a snow blade that is raised and lowered by a hydraulic cylinder.
The hydraulic system of the mini-tractor includes an NSh-10 pump, an oil filter, a hydraulic tank, a distributor, reinforced hoses, and hydraulic cylinders
And so, now let's look at what's what, why and how)
Materials
- ICE "Ural"
- Checkpoint "Moskvich"
- channel 80
- UAZ wheels
- pump NSh-10
- shortened bridge VAZ 2 pcs
- battery
- Steering VAZ
Tools
- welding inverter
- Angle grinder (grinder)
- drill
- set of wrenches
- measuring tool
- skillful hands)
Step-by-step instructions for assembling a 4x4 mini-tractor with your own hands.
The frame is welded from 80 channels. Mini tractor double axle 4x4
The VAZ axle axles are shortened.
Front axle. Torque is transmitted through the drive shaft
Angle of rotation. The torque is transmitted to this sprocket, and then to both axles.
Engine from a Ural motorcycle Blade for clearing snow, raising and lowering is done using a hydraulic system, as you can see a hydraulic cylinder is installed. Oil pump NSh-10
Distributor.
Hitch. The blade can also be installed on the rear linkage of the tractor. The tractor also has a power take-off shaft (PTO), which allows you to mount a homemade milling cutter.
Note! The way the cutter is made is based on the VAZ axle and torque is transmitted from the PTO to it, and from the axle shafts through a chain drive directly to the cutter itself. Tension roller. In the garage.
Snow removal. Dashboard. Video of the tractor in operation.
www.samodelkindrug.ru
Homemade tractor with an engine from a Ural motorcycle
$$$$$$$==========SALE-BUY-EXCHANGE—USED—SPARE PARTS FOR \AUTO AND MOTORCYCLES\=========$$$$$$$ $$ | Topic author: Igor
$$$$$$$==========SALE-BUY-EXCHANGE—USED—SPARE PARTS FOR \AUTO AND MOTORCYCLES\=========$$$$$$$ $$
Vladislav (Hauku) there are 5 wheels from the Urals, a fork, a frame, a cradle, tidy, in general everything except the motor, the Ural bridge has a mileage of 7 thousand, the motor went to a tractor, I will sell it or exchange it for hardware, I need Minsk, or a spare part from him.in person.
Vladislav (Hauku) I will replace the shortened bridge from the VAZ2101 with a bridge (not shortened in good form.
comp.) Muscovite with 41\9 gearbox. This is the s403-407 model, or I will sell it. In PM.
Igor (Ayishah) selling motor UD 25.1500gr selling casique motor with gearbox MT 1000gr selling hole Riga 13 d8e 1000gr in Kharkov
Igor (Ayishah) Sergiy Labay I will buy documents for Izh planet 4 or 5 or for Jupiter 4 or 5
Anna (Greyson) I will buy a head, cylinder, studs, carburetor and kick starter leg! Everything for Voskhod 3m! Everything needs to be in excellent condition!
Igor (Ayishah) selling motor UD 25 working 1500 used in Kharkov region
Igor (Ayishah) hole Riga 13-d8e on the go for sale in the Kharkov region Igor used.
Vova (Narad) Selling…
Vova (Narad) Selling…
Vasil (Aubree) We need luxury 12V glove compartments.
Vasil (Aubree) I will sell MOTUL 10W40 and also 80w90 oil
✭ (Jiya) selling inexpensive motorcycle KANUNI SWIFT-110 ss tel 0996158747 - questions in PM. Kharkov
Tags: Homemade tractor with an engine from a Ural motorcycle
General overview of a homemade tractor with a breaking frame ***************************************** ********************* Our …
DIYers unite | Topic author: Flemming
Hello, tell me how to install a Volgava ignition coil on a Ural motorcycle.
Valentin (Mikey) what kind of ignition is it worth? and why Volgina? and not your own?
Roman (Sharlett) Two-terminal coil from Oka or 406 Volga engine, switch from VAZ 08, hall sensor and that's it. Sometimes kits are sold for installation on Jupiter and Ural. take a look at Yandex pictures - Ural ignition on the hall sensor.
Artyom (Kipp) there will be no advance. I did this.
Artyom (Kipp) perhaps combine the hall sensor with a mechanical advancer
Roman (Sharlett) We have three things that skate without advance
Evgeniy (Shino) these sensors are sold in consolidated sales
Artyom (Kipp) it’s possible, but not very good. Starts up rather poorly and there is less traction.
Artyom (Kipp) which ones and where?
Evgeniy (Shino) I installed two identical 6th century ones. and connected them in series.
Vladimir (Kassim) It works normally without advance and develops excellent speed and traction at low speeds has not disappeared. 3 years since it was done there are no problems, I even forgot the spark plugs when I turned them out.
Mikhail (Aranwen) switch 131.****.11 + Volgovskaya coil + armor wires to the coil
Michael (Aranwen)
Michael (Aranwen)
Evgeniy (Shino) can you have a photo or video on how to install it?
Ivan (Flemming) I haven't tried it
Roman (Sharlett) Yandex pictures
swistun.info
How to make a tractor from the Urals with your own hands
DIY quad bike/moto tractor. | Topic author: Anatoly
give me an idea...
website or video.. article... do-it-yourself ATV based on a Dnepr or Ural motorcycle.. where there is a description and drawings...
Alexander Look who's good at what
Konstantin This is where they will help you
Dmitry, look for a model designer magazine, from Soviet times, there was a lot of that
Tags: How to make a tractor from the Urals with your own hands
UD2 tractor, Ural box, example of DIY assembly.
“do-it-yourself electric guitar” how many times have I heard this!!!! but who really did it and it worked out for him? | Topic author: Alexey
give me an idea... a website or a video.. an article... an ATV based on a Dnepr or Ural motorcycle with your own hands... where there is a description and drawings...
Peter I did. In general, as Ivan said, anyone can do a stump with clotheslines. I managed to achieve ideal tuning and quality comparable to the Ural electric guitar, nothing more. The sound changes depending on what kind of wood the instrument is made of, how the wood was dried, on the direction in which the wood fibers go in the soundboard and in the neck, on the shape of the soundboard, on the shape of the neck, on what sounds, on how the sounds are located, and more. a lot of subtleties, right down to how much glue was used when gluing the heel of the neck.
Kirill I didn’t do it, I’m not capable yet. But I'm going to order a workshop. What I know more about and probably could assemble myself is tube amplifiers
Alexander they do, they do) but few people do, and then Fedor sells them for a lot of money. are called “guitar masters”))) the rest, at best, turn out to be a stump with clotheslines)) they are, of course, unique in their own way, but the trouble is that not everyone can become a seasick Steve))
Anatoly is definitely better not to bother, but to go and buy an instrument. Even if it’s a cheap Chinese oar, it will still be better than scribbling it yourself =))) I know, I know. I made the pickup myself for my anti-Gibson. it turned out surprisingly well for a self-propelled gun, but still it is nothing more than a self-propelled gun.
Mikhail Did, and it sounded very good. I made it according to drawings from the magazine - **Model Designer**, I don’t remember the number, 70s. If necessary I can look.
Andrey Yuri Shishkov. And, it should be noted, Vadim didn’t turn out badly... 
Homemade mini tractor with an engine from the Urals in...
How to make a mini tractor with your own hands with all-wheel drive: ... an engine from a Ural motorcycle, a homemade mini tractor with an engine from ...
Homemade mini tractor with a motorcycle engine...
How to make a mini tractor with your own hands with all-wheel drive: ... The engine is from a Ural motorcycle, the steering is a bipod and a traction ... photo of a homemade mini tractor with an engine from Minsk (10 hp) and a gearbox from ZAZ.
uvlechenie.info
Homemade walk-behind tractor from what was lying around in the barn
So. I present to your attention my walk-behind tractor. I've been collecting it since last year. This weekend I finally threw all the parts together. All that remains is to secure everything properly, turn it around, brace it, make the controls, the plow, the cutter and the cart, of course.
Strictly speaking, on the basis of what the walk-behind tractor is, it is not clear. a purchased Chinese engine specifically for similar equipment of the Lifan brand, a gearbox and one gearbox from a Ural motorcycle (Dnepr gearbox), 2 more gearboxes and an axle from an Ant scooter. Everything else is tubes and plates with corners.
In principle, everything works, spins, spins, but there is a darkening, there are a couple of unresolved problems. This is what this topic was created for.
The problem is primarily speed. MB turned out to be very slow. Estimated speed is about 8 km/h. at 3000 rpm Of course, its traction force is very large, but the darkening is very slow. On the one hand, this is good for the engine because... It’s easier for him, but on the other hand, a lot of gasoline will be wasted. You will have to travel approximately 5 km within a radius of the house.
The second problem is the slow PTO. The power take-off shaft rotates too slowly in my opinion. I'm afraid I'll have to give up the cutter, make lugs and plow with the plow. Or increase the speed of the cutter shaft after the PTO.
Motor tractor with Ural engine | DIY mini tractor
autosam.expert-club.com
|
