How to make a snow queen's throne with your own hands

I'll tell you how to make a crown with your own hands from wire, and then I'll give you a second method using plastic bottles. This craft is purely for children; a similar crown is needed for various holidays or masquerade performances. The crown is not as easy to make as Pinocchio's nose or Mickey Mouse's ears. I will tell you two ways, the first is labor-intensive, and the second is a little easier.

How to make a crown from wire.
How to make a crown from a plastic bottle.
How to make a crown with your own hands from wire.
To create crafts from this material we will need: wire (copper), medium thickness and very thin, beads of various types, pliers, a ruler.

Take a ruler and measure what size the peaks on the crown will be. Make about 11 centimeters on each side, plus 3-4 centimeters for the fasteners and bezel, for a total of 25 centimeters I cut off.

Now decide what type of crown you want, in terms of peaks. If you are making it for a child, then five spades are enough, and if you want a royal one, then no less than eight. The diameter of the crown frame is 11-14 centimeters, depending on the size of the head.

Necessarily! To make the frame strong enough, we make it from wire folded in half, and then twist one more layer on top.

Now the completed frame needs to be divided into eight parts and the peaks attached. For even greater strength, we attach each leg of the peak to each other. As the pictures show.

This is what a crown made from wire will look like, but not yet decorated.

It's time to decorate the crown. First you need to make the tops of the peaks. We take a piece of thin wire, as well as a large and a very small bead.

Watch the tip of the wire -> we pass one end through the large beads -> then through the small beads -> and again we go into the same large beads, but back again. This way, a small bead prevents a large one from flying off the wire.

We wrap the two ends of the wire on one of the peaks. Accordingly, it’s the same on all peaks.

Now let's dream a little. We decorate the wire crown with anything, beads of any size, or thin ribbons. Look at the photo how it turned out for me.

How to make a crown with your own hands from a plastic bottle.
But this craft is very easy to make; all you need is a wide plastic bottle, scissors, glue and beads, or colored glue with glitter.
We draw a crown on the bottle, then cut it out according to the pattern and decorate it.

This is the crown we get. Everything is very simple.

Source: https://do-crafts.ru/kak-sdelat-koronu-svoimi-rukami-iz-provoloki-dlya-princessy-ili-snezhnoj-korolevy/

Building a castle

First, cut out the conditional entrance to the palace with two vertical contours, and on top, using scissors, click notches of different sizes, like hanging icicles. Then turn the cake pan upside down.

Along the contour of the lid, cut out a “floor” in the castle from polystyrene foam, cover it on top and sides with “ice” in the form of a sheet of food-grade aluminum squeezed by hand. Glue the floor. This is how the craft of the Snow Queen's castle began.

An ice coating in the form of PVA glue, popular with children, also appeared on the entrance side. Part of the “building” was doused with it. A hint on how best to do this, this glue is snow-white, but its drawback is its very liquid consistency.

The way out of the situation is quite simple, at home: mix part of the adhesive mass with white flour, then it will not drain. But add the flour in small portions and mix it with the glue very vigorously to get a homogeneous mass without lumps. As you can see in the website photo, our imitation was a success.

To give our ice an even greater and natural shine, we had to sprinkle the hardening white mass with regular glitter. And the texture turned out completely icy. You can buy this tinsel at any store or stationery kiosk.

Princess Crown

New Year, Birthday, just themed gatherings - there can be many reasons to wear a tiara. It’s easy to buy a standard item in a store, but to get the perfect piece of jewelry of the desired size and color, you need to work hard yourself.

For such an accessory you will need: cardboard, multi-colored film (or foil), scissors and any accessories to imitate valuable gems.

The method is very universal, therefore suitable for joint creativity with a young fashionista. You can download or come up with any form for the blank. Next we outline it. This creates the basis.

Cut out exactly the same layer of colored fabric or foil.

Glue them together and remove the excess from the sides.

We connect the edges with glue, a heat gun or even a stapler. We decorate with beads, ribbons, cut out stars or bright rhinestones as jewelry.

We attach ropes or an elastic band under the chin at the bottom.

Ice accessory

This crown has a “candy” effect due to the use of non-standard material.

To work on the product you will need:

transparent PVC film or plastic (you can take old document covers);
tulle with silver pattern;
cardboard;
shiny fabric (silver look);
thread, needle;
scissors;
thin wire;
silver braid;
elastic band 2 cm wide;
hot glue;
decorative elements (for decoration).

First of all, the circumference of the head is measured. Based on the obtained measurement, you need to calculate the width of the base of the vertices of the future crown. There are seven of them in the product.

The height of the triangles is selected individually. You just need to take into account that the central triangle will be the highest. The parts adjacent to the central part are cut 2 cm shorter than the main part. The next two triangles are 2 cm lower than the previous ones, etc. Based on the principle described above, 7 triangles are cut out of PVC film. The same parts are cut out separately from tulle.

A corresponding tulle detail is applied to each workpiece. A wire is sewn along the edge of the blanks using an overcast stitch. All triangles are framed with silver braid. It is advisable to bend the figures slightly so that they hold their shape better. The finished transparent parts are assembled with elastic. The most convenient way to do this is on a sewing machine. The ends of the product are connected into a ring.

To create a volumetric effect, you need to complement the crown with opaque elements. To do this, two triangles are cut out of cardboard. Since these parts will be located on the front of the crown, their height should be slightly lower than the transparent triangles.

Cardboard blanks are covered with shiny fabric and secured with safety pins to the front “ice pieces” of the crown, as in the photo.

Dense and transparent parts are attached to each other. All that remains is to decorate the crown to your own taste. You can use rhinestones, beads, sequins, and lace elements in your work.

The royal ice accessory is ready.

Fortress and labyrinth

In addition to the usual Snowmen, Santa Claus and gnomes, you can try to build a real fortress from different blocks.

Amazing in its beauty and intricacy, a labyrinth with low walls will perfectly decorate a garden or local area, and is suitable for organizing active games with children and their friends.

Decorating, decorating and painting snow and finished figures are the final stages of the creative process and require a certain amount of imagination.

To make the “ice” on the rocks shine brighter

Along the perimeter, carefully bend the plastic with the pointed “rocks” to create the shape of the castle’s mountainous surroundings. Later, glue the entire fabulous installation with tape to cardboard or any other base.

About the rocks... Let the kids rummage through mom's supply of nail polish and choose a white one with glitter. They will use it to cover the rocks at least partially with this original paint.

The thickened varnish will create relief on the rocks, they will turn as if into flows of real ice.

Attach pieces of padding polyester to the top and sides of rocks and ice; this material will imitate fresh snow. You can also cover part of the castle with it.

In a word, the more snow and ice, the closer your interesting handmade is to the composition of “The Snow Queen” by H.H. Andersen.

In the screened fairy tale, everything around shimmers with color, and not only white, but also other colors, because this is the north and there the refraction of the sun’s rays creates a lot of them.

You, young needleworkers, can do the same. Take an old computer disk, cover it on both sides with double-sided tape, and cut it with tailor's scissors into pieces that look like fairy-tale shards.

And carefully remove the tape, leaving a sticky film. But only on one side. The second will be based on the color of the adhesive tape coating. They will shimmer on it with all the colors of the rainbow. Use drops of glue to strengthen them around the Snow Queen's castle without rules, even chaotically.

Crafts from the pages of “The Snow Queen”

Children drew heroes of fairy tales and plots of beautiful illustrations from books and films, and made many board and game crafts with their own hands. Just admire the photo of the “Snow Queen” craft with all this diversity.

Today we’ll tell you which New Year’s craft to choose based on the theme of the fairy tale and how to do it yourself by hand. For example, this will be a craft for the Snow Queen's palace.

Let's try to use modern materials; they will help the children imitate even ice and snow. For example, plastic packaging from a child’s favorite sweet – cake.

Quick option

To do this you should prepare:

cardboard;
fabric packaging for flowers;
scissors;
elastic band;
silver braid;
silver paper;
threads;
glue;
sequins in the shape of snowflakes.

A crown template is drawn on cardboard. The workpiece is cut out. The pattern is placed on the fabric and traced taking into account the allowances.

The fabric part needs to be cut out, then placed on a cardboard mockup. The allowances are folded over to the reverse side and glued to the cardboard.

Glue is applied to the underside of the workpiece, after which the crown is glued onto silver paper. This hides unsightly allowances on the back of the product.

The crown is carefully cut out. The product is decorated with large sequins in the shape of snowflakes.

The outline of the crown is framed with silver braid. Depending on the quality of the braid, you can glue it with hot glue or sew it on yourself.

All that remains is to try on the crown and calculate the length of the elastic band on your head. The elastic is sewn along two edges of the product.

The crown is ready. If the holiday is just around the corner and you urgently need to acquire a “snow” crown, then you can try a simplified version – a product made from cardboard. To prevent the crown from looking like a “hurried craft,” it is advisable to replace the cardboard with a piece of light wallpaper with a pattern.

A model of the crown is drawn on it. The template needs to be cut out.

Then the workpiece is painted with silver spray paint. Since the aerosol tends to be sprayed in all directions, it is recommended to provide for this moment and carry out painting in the corridor, having previously covered the floor with newspaper or polyethylene.

First you should paint the back of the product. On the front side you need to carry out two stages of staining. After applying the first layer, you need to dry the product and repeat the coloring.

When the crown has completely dried, you can begin decorating it. The edges of the product are decorated with edging with rhinestones or any silver braid. The crown is decorated with additional elements corresponding to the theme of the carnival costume.

The final step is to sew a wide elastic band along the edges of the product. You need to measure the elastic so that the crown fits tightly around your head.

The carnival headdress is ready to delight its owner. Any proposed master class will allow you to create an accessory not only for a child, but also for an adult. This is especially true for kindergarten teachers and directors of theater clubs.

Simpler instructions for a carnival tiara

We make the cardboard component. You can draw a stencil yourself or print a picture you like from the Internet.

We glue transparent fabric. We decorate the crown at our discretion.

Note!

How to properly make a birdhouse with your own hands from scrap materials: we create an original birdhouse according to sketches
How to make candles with your own hands: instructions for making wax, gel, scented, homemade decorative candles with a wick
What you can make from foamiran with your own hands: we create flowers, Christmas tree decorations, snowflakes, three-dimensional paintings (photo + video)

Rhinestones around the outline, large stones and beads look very elegant.

We bring the ends together with a wide elastic band. You can use a paper strip, but there is a risk that it will tear at the most inopportune moment.

Crown made of paper, cardboard and cardboard cup

The same model can be made from a leftover toilet paper roll. Then it will not need to be glued.

Using a pressed paper seedling cup can make a stronger crown. Cut out the top of the cup to create teeth. Paint the base white. Then use a scouring sponge to lightly apply gold paint using a dabbing motion. There is no need to paint with solid “gold”. Light white gaps will give the crown more elegance and transparency. We decorate the crown with rhinestones and “precious stones”. We glue a hairpin holder on the bottom side. Now you can pin it directly to your hair!

You can glue together a lightweight crown design from colored paper. Cut equal squares of paper. We make diagonal bends. Now we glue the resulting triangles together, as in the image. Even small children can handle this simple option. Get crafting together!

What crafts are made from snowballs?

We made a lot of snowballs, but we were already tired of playing with them.

Then let's make a funny caterpillar. We lay out and at the same time connect the lumps one after another and get a caterpillar. Now all that remains is to make her horns from wire, and her eyes from buttons.

And when it gets dark in the evening, snowball lanterns will come in handy. To do this, we make a pyramid and place a candle inside. To make it convenient to change candles, remove one snowball from the base of the lantern.

What to make a decoration from

So, your task is to create an accessory for a carnival costume. What can it be created from? The Snow Queen is a heroine of folklore with a luxurious dress equipped with a high collar. Task number one is to create a product that can last in a standing position at least until the end of the holiday.

For these purposes, you can starch the fabric or use a wire frame. An equally effective way to add rigidity to a product is a corsage tape or a corset mustache. These materials are easy to purchase at a sewing store.

Having decided on the base, you can select the appropriate material. It must certainly be light and delicate, but at the same time have a special density. An excellent option would be to use tulle, floral mesh, even ordinary polyethylene or a piece of openwork lace will do. A little work on the decor of the accessory, and it will turn you into a real fairy-tale heroine.

You can see some design ideas in the photo:

Another option: installation of a palace made of matches on a panel

Look at one such sample in our photo, your eyes will simply light up from this beauty. It will be slightly different from the one created above, but it will be closer to both the fairy tale and the ancient architecture of Denmark. This is another interesting winter craft “The Snow Queen”.

For tabletop architecture, prepare:

about one and a half hundred matches;
several pieces are longer than standard ones;
printer paper;
carpentry press for panels;
hot glue;
multi-colored paper, markers.

The simplest option

Starch paste will help you create the simplest collar for a carnival look with your own hands. For the product you will need:

a piece of thick lace;
a pattern or an old collar from a dress of a suitable size;
pencil;
a little potato starch, water.

You can use any pattern:

Place the lace on a flat surface and transfer the template using tailor's chalk. Carefully cut out the piece, capturing the motifs of the openwork material for greater impact.

Cook potato paste from 2 tablespoons of potato starch added to a liter of boiling water. Pre-dissolve the powder in a small amount of liquid so that there are no lumps.

When the solution has cooled to room temperature, place a piece of fabric in it for 5-7 minutes.

The removed collar must be carefully wrung out, straightened and waited a little for it to dry. Gently iron the damp product through a layer of fabric at medium iron temperature, and at the same time give it a curved shape. Instead of lace, you can use an old crocheted collar from a dress. Decorate the resulting product with rhinestones and beads.

In the old days, real queens complemented their look with such standing openwork collars.

DIY snowflake crown step by step instructions

The image of a winter miracle is quite easy to convey. Ball gown and fluffy tiara. It is better to make the accessory yourself, so you guarantee originality and unsurpassedness.

Required:

Scissors
Gypsy needle
White rain with short spines (approximately 3 m)
1.5-2 m copper wire
Threads in the color of rain

Light or transparent hairband.

First, we create the frame of the future tiara from wire. It should look like the letter "P" with three long arms that end in three short antennae.

We wrap everything in rain. It is important that it does not jam; Bald patches will appear. Use a semicircular needle to release the snowball if necessary.

We screw everything to the hoop. If the rim is not very beautiful, you can decorate it with rhinestones or a suitable ribbon.

Royal lace crown

Beautiful carved lace braid 40-45 cm long. The length depends on the desired diameter of the final product. PVA glue. Wax paper. Gold, silver, bronze or other colored spray in a can. Or acrylic paint. Glue Crystal-moment or hot melt glue. A sponge or cloth for applying and wiping off excess glue.

We place our lace on wax paper and coat it with PVA glue 2-4 times until completely dry. After complete drying, paint the workpiece in the desired color. Each layer of paint must dry well. Glue the crown along the edge, matching the pattern. We use hot melt glue or Crystal Moment glue. We decorate the crown as desired. It can be gold or silver:

Or match the tone of the royal outfit: soft pink, yellow, blue.

How to pour water into a balloon?

There are quite a lot of options for making such jewelry. It all depends on your imagination and desire to experiment. The fact is that water does not flow into the balls just like that, that is, from an ordinary plastic bottle you cannot pour water into the ball and fill it to the extent you need. Therefore, the only option to fill the balloon is to supply liquid under pressure. To do this you can use:

Crane. To pour water into the ball, you need to put the neck of the ball on the faucet and turn on the water. After this, you need to tie the ball. There are some subtleties here too. The fact is that if you tie the balls with a thread, under pressure the water will still begin to flow out in small drops and sooner or later it will flow out completely. The best option is to tie a ball. That is, you need to pull the neck up and make a knot out of it.
With a hose. The manipulation is identical to the tap. The neck of the ball is pulled onto the hose.

Pour water into the ball

Where is a throne made from a chair useful?

This throne will be ideal for unusual photo shoots using appropriate royal accessories. It will also look beautiful at any festive event. You can make, for example, a throne for Father Frost or the Snow Queen. It should be decorated with snowflakes cut from thick white and blue cardboard, as well as using cotton wool and foam plastic.

The throne is indispensable for various theatrical events, holidays, masquerades, concerts and matinees in kindergarten. In general, it can be used at any cultural event.

ATTENTION! It is also often done to diversify the interior of an apartment. If the existing furnishings are quite boring, then you can refresh it by decorating ordinary furniture

Rock architecture

Now we need to place our castle in the mountains of icy rocks - everything is like in a fairy tale. Thin bendable plastic can be found in every modern apartment or house.

It is desirable that it be 15 centimeters wider than the height of the created palace, and the length should be to encircle it on three sides, with a distance of 3-4 centimeters from the perimeter of the cake pan.

Have you determined the length and width? Then start cutting deeper cones from the top - these will be the tops of the ice cliffs. This will be the best “Snow Queen” craft for kindergarten.

How to sew a decorative mini bag with your own hands
Crafts from cotton pads - beautiful ideas and tips on how to make decorations and toys with your own hands (70 photos)
DIY New Year's crafts: 70 photo ideas and a master class on making crafts for the holiday

Step-by-step instructions for manufacturing

The manufacture of the throne will depend on where it will be used. You can consider the manufacturing process of the most common product for New Year's celebrations. For decoration you will need white wallpaper, fabric or cardboard, a ruler, a regular pencil, scissors, glue, foil (metallic or blue), and tinsel. You can also add ready-made New Year's rain to the decorations. The work process itself will not take much time:

We take thick cardboard, measure the corners and cut them.
Next, we assemble the “pattern” of the product.
On the top side of the “pattern” we cut out the corners. The corners will resemble pointed ice floes, as in the fairy tale about the Snow Queen.
Additionally, you can cut out patterns inside the top of the “pattern”.
We glue all the pieces of cardboard together and put them on the chair.
Next, we decorate the back using white wallpaper, cutting out the patterns prepared in advance.
We glue the back of the product with tape to the chair.
We decorate the product with tinsel, rain or colored paper. Additionally, you can glue snowflakes or sparkles.

You can also consider another decoration option, a more complex one. It will take about three days to make it, but the result itself will exceed all expectations if you do everything according to the instructions. In this example, we use a regular wooden chair without upholstery. Follow the following sequence of actions:

We sand the chair with medium-hard sandpaper.
Fill the holes from the screws if they are visible.
Prime the surface of the furniture. For simplicity, you can use a diluted solution of PVA glue.
When the solution has dried, cover the chair with dark brown enamel.
After the enamel has dried, rub it with wax.
Next, we cover the surface with two more layers of white enamel.
We decorate the chair using stencils. You can, for example, use roses or any other flowers. The paint color can also be chosen to suit every taste. Absolutely any color looks beautiful on a white background.
The final touch is to varnish the chair. Now it looks like a real throne.

We hope that this article will be useful for creating new interior solutions. After all, with the help of the simplest and most inexpensive materials and tools, you can revive any furniture. Even an ordinary chair can easily turn into a throne.

Structures with frames

Creating a frame in snow figures from wooden sticks or plywood helps to capture them in different poses and make them more alive and interesting, which helps the child feel like he is in a real fairy tale.

Such work will begin with the creation of the main frame. The frame in this case will serve as a skeleton, that is, the main support for the snow mass. Therefore, all the main parts must be installed on the support; for example, the long neck of a swan will not withstand the imposed load and can quickly break without a special frame. To do this, you need to combine all the wooden sticks and individual pieces of plywood in clusters or with wire. It is very important to give the frame stability and strength.

You can also create a frame so that children can use it as a structure for climbing and riding. In this case, it is important so that the child does not fall during the game and get injured.

After installing the frame, you need to fill it inside with snow, and also sculpt the base of the figure on the outside. To add strength to the frame of the figure, it should be lubricated on top with a special “snow dough”; for this, the snow is half diluted with water. All parts of the figure are coated with this mixture; after hardening, the structure becomes especially durable and strong. You also need to remember the importance of rubber gloves for this type of work. After all parts of the frame are camouflaged under the snow, and the blanks reach their size, you need to start adding various details to the structure.

At this stage, the work will be more like creating a frameless figure. The only difference will be the higher complexity of creating additional parts.

Progress of the first lesson:

1.1 Organizational moment. Before the start of the lesson, students take their seats. Each student who comes to class prepares a workplace. Greeting children. Announcing the topic and purpose of the lesson. The topic of the lesson is “Illustration for a fairy tale. "The Snow Queen"

1.2 Introduction to the topic. Repetition of covered material.

Teacher: “Let us remember the fairy tale by H. H. Andersen “The Snow Queen.” Remember how in the evening just before going to bed, Kai wanted to take another look at the snowy street. “White snowflakes were swirling outside the window. One snowflake fell on the edge of a flower pot and began to grow quickly before Kai’s eyes. She grew and grew, and Kai suddenly saw that a dazzling beauty was standing in front of him.” Who was that?

Students: The Snow Queen.

Teacher: The Snow Queen is the main character of the fairy tale. We have already prepared sketches of our illustration for the fairy tale, the main figure of which is the Snow Queen. The image of the Snow Queen can be drawn based on a human figure. It is customary to take the head of the person depicted as the unit of measurement for the human body. It all depends on the age and development of the human body (Appendix 1)

.
How many “heads”
are there in a woman’s figure?

Students: Answer options.

Teacher: Correct. In a female figure and a short adult, the head fits into the body 7 times. In small children, the head fits into the body 5 or 6 times. Before drawing a person, you need to outline his dimensions, his frame.

Teacher: Guys, check how many “goals”

fits into the figure you drew?
(check with the template prepared in the last lesson)
Teacher: Correct. Well done everyone.

Teacher: Let's look at illustrations by different artists for the fairy tale of the Snow Queen? (Appendix No. 2)

What colors did the artist use, warm or cool? Why? Name cool colors.

Teacher: Correct. Children, now we will create new colors and shades for our Snow Queen using cool colors. How do you imagine that? The teacher creates a problematic situation. Guys, there is only blue paint on the table. How to get cool colors and shades?

Student: Mix the paints.

Teacher: If white paint makes friends with blue, what new paint will you get? (blue)

.
If blue paint makes friends with purple, what new paint will you get? (ultramarine)
.
If ultramarine paint makes friends with ruby paint, what new paint will result? (purple)
.
(Appendix No. 3)
Student: Answer the questions.

1.3. Formulation of the problem.

Teacher: We mix cool colors on the palette with white and put them on the background of our drawing. Apply the paint with a large brush. We cover the sheet of drawing from top to bottom, moving the hand horizontally.

1.4 Completing a creative task.

The task is completed in stages through verbal and visual demonstration methods of work.

1.5 Finger gymnastics “Warm your palms quickly.” Conducted during a creative task (2 min)

Crown of sparkling icicles

For an older girl, you will need a more elegant snow queen crown. It’s also easy to make with your own hands.

For production you will need:

70 cm of rigid wire.
5 m of very thin wire.
Oval beads.
Drop-shaped beads.
Sandpaper.
Clear varnish.
Wire cutters.
Elastic band 20 cm.

A large crown for a snow queen with your own hands takes longer to make than its children's cardboard counterparts, but it will easily survive more than one carnival or photo shoot.

First you need to prepare the base of the crown. To do this, cut the required amount of wire to fit the circumference of your head, leaving a 2 cm margin on each side. Bend the ends into a loop and treat them with colorless varnish so that they do not scratch the skin or cling to the hair. The crown can be left in this form and secured in the hair with hairpins, or you can thread an elastic band through the loops and securely fasten it on the head.

Then we attach a thin wire to the base with a couple of turns and begin to make an imitation of icicles. To do this, we string 10 beads, one teardrop-shaped and one oval. We pass the wire back through 11 beads, except for the top one. It turns out to be a small icicle made of beads. We do the rest similarly, but of different lengths. In order for the icicles to stand straight, you will need to intertwine them with each other horizontally. It turns out sparkling, like a snow queen. You can make earrings or a bracelet to match your suit with your own hands from leftover materials.

The Snow Queen Elsa is one of the most attractive modern cartoon heroines. Surely your little one also dreams of feeling like a snow queen. What is a queen without a crown? Of course, to create the image of a snow queen, you will have to work extra hard on at least the shoes, and ideally also on the shoes.

Of course, you can always buy Elsa's crown in the store, but it's much more interesting to make it yourself. Moreover, you can call your princess for help, who will certainly happily participate in its creation.

How to make a Snow Maiden: crown for the Snow Maiden, diagrams, patterns, master class

It just seems that the summer heat is eternal and unshakable. Before we know it, autumn has sprinkled the earth with gold and white flies have flown away. Now it's time to put up the Christmas tree.

And you definitely need to make a beautiful Snow Maiden out of your daughter’s sweetheart for the matinee. You can, of course, go through the pre-holiday sales and buy a fur coat, boots, kokoshnik or hat, but it’s much more interesting to sew a costume with your own hands.

By the way, even under the Christmas tree the Snow Maiden, made with her own hands, will bring more gifts.

Kokoshnik for the Snow Maiden

Many mothers think and wonder how to make a crown for the Snow Maiden. But why? After all, this girl is the granddaughter of Santa Claus, an exclusively Russian character. And Russian women put a scarf, kokoshnik, and kichka on their heads. The crown most likely belongs to the snow queen.

To sew a kokoshnik you will need:

newspaper;
wide hoop You can buy the simplest plastic one at any newsstand;
PVA glue;
cardboard;
glass beads, beads, seed beads, stickers, everything you can use to decorate a kokoshnik;
scissors;
pencil;
ruler;
beautiful braid;
tapes.

How to sew a kokoshnik

Fold the newspaper in half and draw half of our craft with your own hands, with edges that look like flower petals.

Cut the template along the drawn outer contour. Don't be afraid to make mistakes and experiment. We don’t mind the material as long as we work with newspapers. Expand. Attach the rim to the middle and draw a dotted line along it.
Step back 2 cm to the center and draw another arc along which you will need to cut the kokoshnik. Cut “teeth” 2 cm long with your own hands.
Cut out a headdress from thick cardboard according to the template and, bending the teeth, grease them with glue. Attach the kokoshnik to the inside of the rim.

Draw straight lines towards the center using a ruler and cut the petals as shown in the picture.
Place the kokoshnik on the head of the future Snow Maiden or doll and, slightly tilting the petals back, glue the places where they overlap. Please note that the middle petal should be the top one.
Decorate the kokoshnik as your imagination tells you and the source materials allow. Don't forget that such a headdress should be beautiful on both sides. The edge of the crown can be trimmed with braid or sewn on tinsel in the form of Christmas tree branches.

SEE: Pasta crafts: from simple to complex

Sew beautiful ribbons for tying at the back of the head so that the kokoshnik stays well on the head.
Glue a braid, a beautiful ribbon or lace on top of the hoop. You can combine these last two operations by taking long ribbons and gluing them to the hoop, leaving 30-50 cm on both sides for tying.

Knitted kokoshnik

What could be more suitable for a Snow Maiden headdress than crocheted patterns. The photo clearly shows the knitting pattern. In order to make such a kokoshnik with your own hands, you need to use white cotton threads.

After finishing knitting, be sure to heavily starch the product. How to do it.

Dissolve 2 tbsp. spoons of potato starch in a glass of cold water. Boil 1 liter of water and pour in the starch milk, continuously stirring the paste. Add 2 tsp.

Plot

One day, an evil troll decided as a joke to make a magic mirror that distorts reality. But his students accidentally broke the mirror, which scattered into thousands of pieces all over the world. One of these fragments hit the eye and heart of a boy named Kai. He was always kind and cheerful, but the magic mirror did its dirty work, and the boy turned into a capricious, evil mocker. With his behavior, Kai greatly upset Gerda, with whom he had previously been very friendly.

One day, Kai, while sledding, clung to the sled of a beautiful stranger. She turned out to be the Snow Queen. She kissed the boy and went with him to the palace.

After Kai's sudden disappearance, Gerda cried for a long time, and with the arrival of spring she went in search of him. He got into the boat and sailed along the river, which took her to a beautiful, cozy house, whose owner was a kind old sorceress. She fell in love with Gerda very much and did not want to let her go. However, even despite the old woman’s magic, the girl went further in search of Kai.

From the wise raven, Gerda learned about the Princess and the Prince, in whose description she recognized Kai. The girl hurried to the palace, but was disappointed - the prince was not her dear brother. Having learned about Gerda's ordeal, the Princess took pity on her and gave her a carriage and a beautiful dress with a fur coat.

Gerda set off again, but was soon attacked by robbers. The chieftain's daughter, the Little Robber, did not allow the girl she brought to her lair to be killed. The Little Robber lived with a Reindeer, who told Gerda that Kaya had been taken with her by the Snow Queen. The little robber decided to let her captive go in search of her brother, ordering the Reindeer to take her to Lapland.

The reindeer took Gerda to Lapland, where a Laplander and a Finnish woman lived. The old women helped the girl find the way to the Snow Queen's castle. Gerda managed to make her way through the army of huge snowflakes to the royal chambers, where she saw Kai. The boy sat in the middle of a huge hall and laid out the word “Eternity” from pieces of ice.

Snow - space for imagination

Every year, my parents and children made various snow constructions and thereby surprised all the residents of our village. I would like to note that all the photographs presented here are from the old kindergarten. The plots in it, of course, were much larger than now in the new garden. And I, in turn, really miss the space for children that we had.

Previously, it was possible to build a lot of buildings on the site: both children had freedom to climb and the buildings could be climbed. And now we can only allow 2 buildings on the site, otherwise the students will have nowhere to play. The kindergarten itself is very good, warm and cozy. But I found one photo from the new garden, this is a building from last winter.

To decorate it, we used fabric material (2 T-shirts), an old bedspread, old children's clothes, and made the head and arms from foam rubber. In general, there is nothing complicated. The main thing is to have desire and patience, and then the work will go quickly.

Here's another original character. Here junior teachers helped us; they cut out numerous details to decorate the buildings. By the way, the children really enjoyed sculpting the crocodile, and this construction caused virtually no difficulties.

And this dragon was made by an elderly man with a small chainsaw, he used to work for us as a carpenter, and he carved it so deftly - you had to see it. The children and I watched his work from the window with interest.

Since we live in the Khanty-Mansiysk region, holidays cannot pass without hanteika, and we used a lot of interesting materials for decoration. And overall it turned out to be a very bright and attractive image.

There are also deer in our area, because they are the Khanty’s pets. Therefore, this forest inhabitant is also often found in our winter buildings. Just look how beautiful it turned out!

Frame kokoshniks

An original kokoshnik hat in the shape of a green spruce is an excellent themed accessory for celebrating the New Year. Extravagant, stylish and to the point!

You can make a kokoshnik professionally according to the following scheme: make a frame from wire, cover it with a base fabric, glue brocade to it using paper clips, decorate the kokoshnik with pearl thread, sparkles, rhinestones and bugles, and tulle.

You can combine a frame kokoshnik with a cardboard one. Make carved designs in cardboard and glue translucent fabric over it. Decorate to your liking and the kokoshnik is ready!

And this kokoshnik would look great on the head of Nastenka, the heroine of the fairy tale “Morozko”.

We make a real costume for the Snow Queen from a wire base and fabric decor. We decorate the outfit in the same style. The stand-up collar with large “cold” decorations is especially chic.

List of sources

podelki.org
www.maam.ru
obrazovaka.ru
setafi.com
liceiblok.ru
knittochka.ru
DekorMyHome.ru

Snow figures for school

You can involve children in making school figures. The manufacturing technique is no different, although the scenarios may be more exotic. If you wish, you can get outdoor garlands and decorate the figures with them.

Tiger

In 2022, a figure of a tiger made of snow is almost a mandatory attribute in the ice town. It is only installed in December, although this is not entirely correct. According to the Asian calendar, the New Year will begin on February 1, and the tiger or tiger cub will come into its own.

The main details are the body, paws and head with an elongated muzzle. First, general shapes are compacted from wet snow, then smoothed and volumes are added for details. The final image is created by colors - a bright orange background and black stripes.

Tiger Cub

Tiger