Bite activators for summer and winter fishing - 20 best stimulants for 2022

Fishing has long been a real art. Fishing rod enthusiasts explain the lack of bite in different ways. Some believe that the main factor behind the lack of bites was the decline in the population of the fish “stock”. Others are confident that representatives of the ichthyofauna are getting smarter faster than fishermen are finding new ways of fishing. But both of them do not sit at home with their hands folded. To outwit an invisible opponent, modern electronic surveillance devices and magical baits are used. One of the most discussed ways to attract fish to a fishing spot is the use of bite activators. There are a lot of both positive and negative reviews on the Internet for almost every product. Unfortunately, among them there are both openly advertising messages and negativity from those who have not even tested the new product in practice. Therefore, the final verdict can be made by each angler independently only after testing in real reservoir conditions. All activators can be divided into several groups.

1. Attractants allow you to attract fish to the fishing site. This can be one substance or a whole group of chemical compounds that force representatives of the ichthyofauna to instinctively move towards the feeding area or bait.
2. However, the accumulation of fish in a certain water area does not guarantee a good bite. Therefore, it is important to arouse a strong appetite in underwater inhabitants and force them to compete with each other in pursuit of bait.
3. Many bite activators contain both attractive components and hunger-inducing ingredients. Some manufacturers synthesize new chemical compounds, while other developers focus more on natural food, known to fish at the genetic level. When choosing a magic additive, you should take into account its environmental friendliness, especially if the caught fish will subsequently be served on the table.

Our review includes the best bite activators. When selecting specific fishing products, the following criteria were taken into account:

• environmental friendliness of the activator;
• efficiency of application;
• price;
• expert opinion;
• reviews from amateur fishermen.

How to make a brake clasp from a cord: master class

An easy way to make your own clasp with barrel or fang buttons.

A brake is a fastener consisting of a large button, most often elongated, and a loop of coarse cord. Most often, brakes are used on outerwear, in particular on duffle coats, and on models made of knitted fabric. The option from this master class is the simplest, without overlays that are sewn on top, and it is suitable for use with coats and other dense fabrics that hold their shape well and do not deform.

When selecting the cord for the fastener, make sure that it fits into the holes of the button. As a last resort, you can always thread the cord through the holes by tightly wrapping the end of the cord with tape.

Duffle coat: the most informal of classic coats

You will need:

- barrel buttons or fangs;

- sewing machine and threads, contrasting or matching the cord.

Life hack: how to thread a cord into a drawstring using tape

Step 1

For each fastener, cut 2 identical pieces of cord. Select the length of the segments by folding the lace in half: your button should fit freely into the loop, plus there should be 1.5-2 cm or more left for sewing the loop and processing its ends.

Thread one of the pieces of cord into the button.

Step 2

Tuck the ends of the cord pieces by 0.5 cm; all turns should face the same direction, for example, down. Secure each hem on the machine using a bartack.

Step 3

Align the ends of the cord with the button and secure with a clip. Starting at the ends of the cord and moving towards the button and then back, make a double zigzag stitch connecting the ends of the cord.

Step 4

Repeat step 3 with the piece of cord without the button, leaving an open loop for your button to go through. Now the fastener can be sewn to the coat.

Photo and source: sewalongs.com

What is a buttonhole, why is it needed and how to sew it on?

The idea of ​​​​using “fang” buttons: 3 options for a cape with a fastener

Source

Top 5. MINENKO Liquid Booster Big Fish

Rating (2021): 4.04

• Characteristics

  Average price: 260 rub.

• Country: Belarus
• Types of fish: carp
• Application: for bait
• Consistency: liquid

We have before us a complex multi-component bite activator, designed to catch all representatives of the carp family. Bream, carp and other herbivorous species respond equally well to it. The substance does not have any distinct taste. The flavors are neutral, but they use enzymes that the fish respond to naturally. The liquid is applied directly to the tackle. Moreover, it is advisable to use either live bait or edible silicone. The consumption is quite high, and the liquid only works for half an hour. However, the price tag is quite low, which is what makes the product so attractive.

Advantages and disadvantages

• Affordable price
• Neutral aroma

• High consumption
• Complete ignoring of the activator by predators

LiveInternetLiveInternet

—Categories

—Tags

—Quote book

New video advertising. We block. Returning to the Question I asked before this post.

Explanation for the previous lesson. Hello everybody. Yesterday I posted a lesson about a new one.

How to properly remove Adobe Flash Player from the OS Hello everyone. In this lesson I will explain.

What to install instead of Flash Player Flash support is ending soon. It will be necessary to have it.

—Links

-News

—Search by diary

—Subscription by e-mail

-Friends

— Regular readers

—Communities

-Statistics

Adviсe

The super bite bait is exactly the kind of acquisition that will always be useful in any weather. It is versatile and very effective, so every angler should have it.

In order for the device to work longer, you must follow a few simple rules:

• Try not to hit the device too hard on the water or let it in, as this may cause it to break.
• Sudden changes in temperature are undesirable
• The device must be dried immediately after use.
• After using super bite in salt water, rinse it thoroughly in fresh water and dry it
• Store in packaging, so the risk of damage will be minimal.
• Monitor the charge level; after each use of the super bite, the device should be charged

If you follow these simple operating rules, you will be able to enjoy the flawless operation of the device for a long time.

How to make your own brake clasp for knitted items

How to make your own brake clasp for knitted items

Let's consider several options for brake fasteners. They all have one thing in common: CORD (braid) and LOOP made of cord.

How to make a brake.

How to crochet a cord see here..

Patterns

Cord: cast on 3 stitches and knit them, * transfer 3 stitches to the left knitting needle, thread at work, and knit. Repeat from * until the cord reaches the required length.

The best winter bite activators

In winter, it is quite difficult to bring fish out of lethargy. It reacts weakly to even the strongest odors and completely ignores aromas that are not characteristic of the environment. Exotic mixtures such as mango or pineapple are unlikely to bring results, but bait based on natural aromas works great. They can be applied either directly to the tackle, if the activator is presented in the form of a liquid or spray, or added to the bait. In winter, it is especially important to strictly observe the consistency. Too strong aromas, often used in activators, can have the opposite effect and scare away the fish rather than lure them.

Description of work

Button

Tie a cord of 4 stitches about 14 cm long. Make a double knot as shown in the picture and sew the ends of the cord.

Decorative tassel

Tie a cord of 4 stitches about 25-30 cm long. Twist it according to the pattern and sew the ends. Then make a tassel and secure it to the straight end.

Decorative clasp

Tie 2 cords of 3 stitches, each about 50 cm long. In accordance with the pattern, fold the ends in a spiral, securing its turns with hidden stitches, and then make the remaining folds. At the end of one of the parts, make a knot as a button.

Source

Roach bait

Roach is a very common fish in Russian waters, and there are a huge number of recipes for its bait. Here are a few of them:

Recipe one:

• Cooked rye – 300 g
• Crushed breadcrumbs – 300 g
• Oatmeal – 200 g
• Ground rolled oats – 100 g
• Roasted ground hemp seed – 50 g
• Filamentous algae – 50 g
• Small maggot – 2-3 matchboxes
• Grated garlic - half a tablespoon

Recipe two:

• Ground biscuit about 300 g
• Breadcrumbs 100g
• Dry crushed clay – 100 g
• Bran – 100 g
• Cumin – 1 pinch
• Small maggots or bloodworms - 2 or 3 matchboxes

The most favorite natural scents for roaches are the aroma of vanilla or coriander, as well as anise. The smells of almonds, caramel, chocolate, and hemp are added to dry mixtures.

LiveInternetLiveInternet

-Music

—Categories

—Quote book

Paris, 17th century, time of Louis the Great. The young bookbinder Charles de Gresy makes pe.

Two attractive guys sat down next to a couple of young girls at the window on the train and started flirting.

Catherine Webb is an English writer popular all over the world. Her works have been translated into two.

Description of knitting Russian sizes: 46/48, 50/52, 54/56 Back: braided.

—Search by diary

—Subscription by e-mail

—Interests

-Friends

— Regular readers

—Communities

Top 2. Dry Blooder

Rating (2021): 4.65

Development of European ichthyologists The bite activator, developed by a European institute, was the result of many years of research by ichthyologists and other scientists.

• Characteristics

  Average price: 890 rub.

• Country: Russia-France
• Types of fish: predators
• Application: in the feeder, in the water
• Consistency: dry

One of the few bite activators, in the creation of which ichthyologists took part, is the development of Dry Blooder. The principle of action of the drug is based on the joint work of pheromones and albumin. The purpose of pheromones is to induce a feeling of hunger in representatives of the ichthyofauna. Moreover, the fish instinctively moves to the place where the alluring aroma comes from. Dried blood (albumin) is very rich in protein, which is quickly absorbed in the fish’s body. Therefore, the fish begins to feed intensively in the zone of action of the activator.

Advantages and disadvantages

• Development by scientists
• Lots of protein
• Get started quickly

• High price
• An infrequent guest on store shelves

BRAKE CLASP

Nowadays, such fasteners play the role not only of a fastener, but also as a decoration of the item itself. The brake fastener is a stylish alternative to buttons, for example for jackets and coats, knitwear and knitwear. Thanks to famous designers, it is regaining popularity.

Let's consider several options for brake fasteners. They all have one thing in common: CORD (braid) and LOOP made of cord.

How to make a brake.

How to crochet a cord see here..

Patterns

Cord: cast on 3 stitches and knit them, * transfer 3 stitches to the left knitting needle, thread at work, and knit. Repeat from * until the cord reaches the required length.

Bait for crucian carp

Since activators are designed to lure fish until the end of fishing, it is necessary to select the scent very carefully.

The timid crucian carp has smells to which it gives particular preference:

• Vanilla. This smell will most attract small and medium-sized crucian carp, and you should not be surprised if, in addition to it, you also pull out several bream, which are also willing to go for it
• Anise. It’s enough to just add a few drops of anise oil to bread or semolina, but it’s good for summer fishing, not winter.
• Garlic. More suitable for large fish
• Honey. Sometimes crucian carp want something sweet; honey can be added to semolina.
• Hemp. Used if the bite is completely sluggish.
• Dill. Used in heavily overgrown reservoirs.
• Potato chips. If you want to catch small-sized crucian carp, then these are also suitable.
• Oat cookies. Crucian carp are well lured to it, but to prevent it from falling apart quickly, add flour.

If you don't want to make the activator yourself, you can go to a specialty store and choose a liquid or powder activator there. Now the choice of such additives is very large, and for hunting any fish.

Description of work

Button

Tie a cord of 4 stitches about 14 cm long. Make a double knot as shown in the picture and sew the ends of the cord.

Decorative tassel

Tie a cord of 4 stitches about 25-30 cm long. Twist it according to the pattern and sew the ends. Then make a tassel and secure it to the straight end.

Decorative clasp

Tie 2 cords of 3 stitches, each about 50 cm long. In accordance with the pattern, fold the ends in a spiral, securing its turns with hidden stitches, and then make the remaining folds. At the end of one of the parts, make a knot as a button.

Source

Carp bait

For active fishing for carp, as well as bream, garlic is a good choice. In addition to the tincture, you can add 4-8% anise powder to complementary foods.

Here, for example, is a recipe for feeding carp using an activator such as honey:

• Weed out small unripe corn kernels
• Pour the corn into a container and add water, leave to soak for 2-3 days
• Then cook for about an hour, it is important not to turn the complementary foods into porridge.
• Leave to cool
• Before fishing, add a little honey to make the complementary food aromatic and sweet.

Carp are also well attracted by the aroma of fresh bread and legumes such as chickpeas.

Brake clasp

The brake fastener is an ideal alternative to buttons, for example, for jackets and coats, knitted items. And not only in cases where buttons are boring. The brake fastener is decorative and gives the garment a sporty look. Fastener parts can be purchased ready-made at craft stores, or you can make them yourself.

Brake fastener example

The name "brake" means a cone-shaped piece of wood that is inserted into a knot to prevent the knot from being tightened.

brake fastener usually uses special cone-shaped buttons, but you can choose any others.

To make fasteners and brakes, we need leftover leather (or leatherette), a cord (or strips of leather) and a brake button. The cord should go through the holes of the button.

Preparation of materials

Cut out 2 triangles from leather (faux leather).

Prepare 2 pieces of cord (braid), the length of which is determined depending on the length of the fastener.

Making a fastener

Thread the cord into the holes of the button (Fig. 1,a), fold it in half and baste it to the leather triangle.

The second piece of cord is also folded in half and basted to the second triangle.

Pin the right shelf of the product onto the left, aligning it along the line of the middle front. Place the fastener parts at the same distance from the edge of the product, while the brake button should be located exactly along the line of the middle front. Then attach the second part of the fastener to the left shelf (Fig. 1, b). After fixing the required length of the cord, stitch the leather triangles to the edge.

You can make a fastener on one side. In this case, the brake button is sewn directly to the left shelf along the middle line (Fig. 1, c).

If there is no suitable cord, you can make a brake fastener from leather braid.

We place the braid under the leather triangle (Fig. 2, c). The remaining operations are performed in the same way as with the cord.

The brake fastener is ready. It will decorate your clothes.

Source

Top 4. Cool worms

Rating (2021): 4.46

The most reliable and durable flavor Activator is made on the basis of dense grain with a natural aroma. Flavoring additives significantly enhance the aroma of bait and are not washed away by water for a long time. The activator works for at least two hours from the moment of casting.

• Characteristics

  Average price: 800 rub.

• Country Russia
• Types of fish: bream, carp, other carp
• Application: in bait
• Consistency: dry

A bite activator based on natural grains, thanks to which it does not scare off even the most cautious fish. The brand's assortment includes many flavors, both natural (worm and bloodworm) and exotic (mango, strawberry and caramel). As practice and customer reviews show, in the summer season all flavors work equally well. The disadvantages include the impossibility of application to equipment. The consistency is dry. It must be added to the feed, from which boilies and other baits are then made. One package is enough for a kilogram of the finished mixture, which makes the activator very attractive in terms of price.

Advantages and disadvantages

• Economical consumption
• Lots of flavors to choose from
• Only natural ingredients

• Cannot be applied to tackle

Brake fasteners (ideas, options, master class)

The brake fastener is an ideal alternative to buttons, for example, for jackets and coats, knitted items. And not only in cases where buttons are boring. The brake fastener is decorative and gives the garment a sporty look. Fastener parts can be purchased ready-made at craft stores, or you can make them yourself.

Brake fastener example

The name "brake" means a cone-shaped piece of wood that is inserted into a knot to prevent the knot from being tightened.

1) The brake fastener usually uses special cone-shaped buttons, but you can choose any others.

To make fasteners and brakes, we need leftover leather (or leatherette), a cord (or strips of leather) and a brake button. The cord should go through the holes of the button.

2) Or you can do it yourself

.

1) Preparation of materials

Cut out 2 triangles from leather (faux leather).

Prepare 2 pieces of cord (braid), the length of which is determined depending on the length of the fastener.

Making a fastener

Thread the cord into the holes of the button (Fig. 1,a), fold it in half and baste it to the leather triangle.

The second piece of cord is also folded in half and basted to the second triangle.

Pin the right shelf of the product onto the left, aligning it along the line of the middle front. Place the fastener parts at the same distance from the edge of the product, while the brake button should be located exactly along the line of the middle front. Then attach the second part of the fastener to the left shelf (Fig. 1, b). After fixing the required length of the cord, stitch the leather triangles to the edge.

You can make a fastener on one side. In this case, the brake button is sewn directly to the left shelf along the middle line (Fig. 1, c).

If there is no suitable cord, you can make a brake fastener from leather braid.

We place the braid under the leather triangle (Fig. 2, c). The remaining operations are performed in the same way as with the cord.

The brake fastener is ready. It will decorate your clothes.

Based on materials from the magazine “Burda”

2) Question one: “from what?” You could, of course, buy the cord in the store, but I decided to knit a caterpillar from my favorite Tulip threads. You can take any thread or ready-made cord, or soutache.

Question two: “what button?” Anything will do to brake. You can roll a button from a cord (we will show you how below). You can take a ready-made one, the one you like, the shape you imagined. Although classic brake clasps are made from rolled cord. I offer you another option - tie a bead. Question three: “form”. There are many options. I tried to collect as many types of brake fasteners as possible, although it was difficult to find them...

So. I'll show you what I did. Knitted a caterpillar. Since the fasteners must be the same, I counted the turns so that the cords were the same length. I tied the beads. I wrapped the cords and secured them with the same thread. I sewed beaded buttons to one side, woo-a-la, they turned out to be very beautiful, and most importantly, unusual fasteners for my poncho:

Top 3. Fish XXL

Rating (2021): 4.51

Best value for money The activator, used by professional fishermen, is designed specifically for fishing in places that are not very rich in fauna and do not offer much catch. The consistency of the spray completely offsets the seemingly high price tag.

• Characteristics

  Average price: 990 rub.

• Country Russia
• Types of fish: all
• Application: for bait
• Consistency: spray

One of the most convenient activators to use is Fish XXL spray. It was developed in close collaboration between scientists and professional fishermen. It took three years to determine the optimal composition. The effectiveness of the product has been proven in practice; many athletes have won prizes in international competitions thanks to this development. The substances that make up the spray actively affect the fish’s sense of smell. By irritating the nerve endings, the drug detains the fish at the fishing point and stimulates it to bite. The activator can be applied to silicone baits when fishing for predators with a spinning rod or added to the bait before casting when fishing for bream or carp.

Advantages and disadvantages

• Recommendations from athletes
• Irritating and fish provoking additives

• Blurs quickly

Variants of brake fastener shapes:

3) More options

also suitable for fastening

The brake fastener is an original way to decorate your clothes! This fastener is suitable for women's, children's and men's clothing and is most often used for outerwear. The brake fastener is an indispensable attribute of a duffle coat, a short single-breasted coat with a hood.

Our master class will show you how to make a brake fastener with your own hands, simply and quickly!

Advantages and disadvantages

The bite activator helps attract a large number of fish, but it also has its advantages and disadvantages.

The drug acts equally in winter and summer.

The substance can be used in the sea and fresh water bodies. The bite activator is equally effective in still water and during currents.

One package can be divided into several doses.

This is an environmentally friendly product that can be combined with any type of bait, complementary food and bait.

Can be used for fish farms to feed predators with natural food.

Bite activators are quite difficult to purchase, as there are a large number of fakes.

Brake fastener: design options

The brake clasp is often duplicated with buttons. They are sewn on the wrong side behind the lining fabric for additional fixation.

Pay special attention to the button and cord. The holes in the button should be large enough so that you can thread the cord through them. For overlays, it is best to use samples of natural or artificial leather so that the edges can be left open.

If you are using fabric for the overlays, cut out the pieces with additional hem allowances, turn the edges under and baste, and then sew to the product. In addition to the cord, you can also use strips of leather or sewn tucked cord from leftover fabric. You can take not one, but several thin cords and tie them with several knots.

For one brake fastener you will need one button, two overlays of the desired shape and size and two pieces of cord, the length of each should be twice the length of the loop plus an allowance that will be covered by the overlay.

So, let's sew a brake fastener with our own hands.

Progress

Cut out two identical pieces for the overlays and prepare two cords and a button.

Insert one cord into the button as shown in the photo.

Tie a knot or sew a cord, leaving about 1 cm from the button.

Pin the front pieces together, aligning them in the center. Fold the second half of the cord in half and cut it to the same size as the first half. Place the button with cords and the other half of the fastener at the same distance from the center. Pin or baste.

Popular publications

The best summer bite activators

During the warm season, fish are actively searching for food. Caution becomes dull, and even those baits that the fish cannot encounter in reality begin to work. For example, tropical fruit, caramel and Coca-Cola flavors are often used. Also, good results are shown by baits that enhance the natural smell of the gear: bloodworms or worms. It is difficult to say which activator is better. It all depends on a number of factors, such as weather and even atmospheric pressure. You always need to experiment and try different options. Fortunately, the market is rich in offers, and some of them are included in our rating.

Flavors based on natural odors

All activators based on natural ingredients can create a smell that attracts the attention of fish. The flavoring must either be placed in the water separately or added to the base. Fish also have their own taste and aroma preferences, which you need to remember when preparing the activator:

1. Garlic - used for catching almost all types of non-predatory fish. Dosage – 2-3 large cloves (don’t forget to chop).
2. Turmeric – for roaches (no more than 15 g).
3. Cinnamon – for roach and bream (5-10 g).
4. Thyme – for carp (about 10 g).
5. Star anise - for catching all major non-predatory fish (no more than 10 g).
6. Coriander – for bream (10-15 g).