2021 ᐈ

Materials and tools

Before starting work, you need to acquire materials and tools that will be useful in the work. Here is a sample list of them:

Welding machine (you can rent it).
A jigsaw, preferably an electric one.
Bulgarian (preferably).
Drill with a set of drills.
Stapler for furniture.
Plywood, 1-1.5 centimeters thick.
Sintepon and foam rubber (sold in fabric stores).
One roll of upholstery fabric.
Varnish (optional).
Hard sandpaper that will be used for sanding materials.
Self-tapping screws and bolts.
Screwdrivers, keys.
Swivel casters (available at some furniture stores).
Metal profile pipe 40mm.

If you have good neighbors, you can borrow some tools for a short time.

IMPORTANT! When working with cutting tools, follow safety precautions to avoid injury.

How to properly repair a chair

You already know how to make an office chair with your own hands. How to fix it if some part fails? First of all, divide the breakdowns into specific ones and those that can be fixed at home. It is better to entrust complex repairs to a professional. Sitting on a faulty chair primarily affects your health. Therefore, take repairs seriously.

Simpler parts, such as wheels, crosspieces, and armrests, usually need to be replaced or repaired.
The crosspiece breaks most often, especially if it is plastic. The main thing is to carefully pull it out of the gas lift. This is convenient to do with a hammer.
The legs often need to be replaced. To do this, remove the backrest and armrests so as not to break them during repairs. Turn the chair over, remove the mounting screws, and remove the cover. Use a hammer to knock out the gas lift and replace the crosspiece with a new one. Craftsmen recommend lubricating parts for best performance during assembly.
The piaster, the metal mechanism that regulates the height of the chair, often breaks. It is removed from the pseudo-cartridge and disconnected from the gas lift with several blows with a hammer.
Handmade furniture pleases the eye and adds productivity. It’s so nice to sit every day in a chair created exclusively for your comfort and convenience.

What is

A chair for feeder fishing can be made in the form of a simple stool. For greater comfort, it is worth building it more complex: with a back, armrests and a body kit. For a chair to be comfortable to use, it must meet the following requirements:

Compact design - the chair should easily fit into a backpack when going fishing. Lightweight, which is important for carrying over long distances. Strength, which affects the ability to support the weight of the fisherman. Stability on any surface, since the banks of reservoirs are not perfectly smooth. The safety of the fisherman depends on this. The legs of the chair for winter fishing should not be thin so as not to be pressed into soft ground or snow under the weight of a person

Another advantage of the feeder chair can be the adjustable back and legs, which allows you to change the height of the backrest and, in a sitting position, relieve tension from the back that arises from being in one position for a long time

The legs of a chair for winter fishing should not be thin so as not to be pressed into soft ground or snow under the weight of a person. Another advantage of the feeder chair can be the adjustable back and legs, which allows you to change the height of the backrest and, in a sitting position, relieve tension from the back that arises from being in one position for a long time.

Compact design

Lightness

Strength

Stability on any surface

Useful tips

If a person decides not to purchase a computer chair, but to assemble it himself, then he will be able not only to spend time profitably, but is guaranteed to provide himself with durable furniture with an exclusive design. You should focus on the interior of your personal office not only at the stage of creating a drawing, but also when choosing upholstery fabric.

If everything is done correctly, the chair will meet all the user’s needs and will become the envy of friends and acquaintances.

Some people assemble massive computer chairs from wood. They have a large mass, but are as stable as possible. The disadvantage of such structures is not only immobility, but also the lack of adjustment elements and wheels. The metal profile gives additional freedom at the stage of creating a drawing and during the final assembly of the product.

Alternatively, you can assemble a chair-table with a special tabletop for installing a laptop. This solution is suitable for freelancers, but ineffective for gamers.

Before you make an office chair with your own hands, you need to thoroughly prepare and review several master classes. Working in an office can have a significant impact on your posture, including when using off-the-shelf furniture, so custom design is the best solution, but it also has its challenges. It is important to assemble the most comfortable, but at the same time not overly comfortable furniture. An office is a place of work, not relaxation.
You can assemble computer chairs with your own hands from old furniture, but this will significantly worsen the appearance of the product. It is better not to use used materials, especially when making furniture for a child. By choosing a previously used profile, wood and upholstery, you can significantly reduce the life of the chair.
Of course, making furniture yourself is an expensive business, but it is several times cheaper than purchasing products from a specialized store. But you can cut costs, for example, by using a lift from an old chair, as well as wheels, adjustments and fasteners. But in the end you will still get a unique thing that no one else will have.

Design Features

The computer chair has quietly become an integral part of most modern homes and offices. Such designs are found everywhere, because when using them, work at the computer takes place in comfortable conditions. Today on sale you can find chairs of various modifications - from the simplest to the most advanced, complemented by various functional components. Some users decide to make a similar item themselves in order to ultimately get exactly the design they want.

Before starting all preparatory and work processes, it is important to understand the shape of the future product. It is necessary to take into account how long a person will sit at a computer desk, because different types of activities require the use of different models of chairs

It is important to focus on the height, weight and equipment of the future user of the homemade design.

Homemade computer chairs require the preparation of individual diagrams and drawings indicating all dimensions. Such things can have a truly unique design. When drawing up a detailed plan for a future product, it is permissible to add any desired elements, even if they are far from standard solutions. If a home master wants to make a classic model, then the following elements will be present in its design:

armrests (side parts) - needed to hold the user’s torso within the structure, as well as to be able to position the arms as comfortably as possible;
seat – you cannot do without this detail for a comfortable pastime with computer equipment; the seat should be as comfortable as possible and not overly soft;
the back is an equally important element, which is responsible for maintaining the correct posture of the user;
a regulatory mechanism is needed so that a person can keep the computer chair under his own control and customize it for himself.

Required materials and fastenings

In addition to the tools, you need to buy the materials from which the chair will be created, these are:

Plywood. The sheet thickness should be no more than 10 mm and no more than 15 mm.
Metallic profile. Will be needed to create the base and crosspiece of an office chair. Sold at metal depots and construction stores.
Upholstery fabric.
Foam rubber and synthetic winterizer.
Paint and varnish products. It is necessary to buy if the overall idea requires it.
Sanding material.
Self-tapping screws.
Bolts.
Small hand tools (screwdrivers, wrenches, etc.).
Wheels for a chair.

You don't have to be a professional carpenter to make your own computer chair. You just need to follow the instructions and take precautions.

Assembly

Now you need to put the office chair back together.

The most difficult part of the job is fitting the parts correctly.

To do this, you need to do everything step by step, following the diagram for disassembling the chair, but performing the manipulations in the reverse order.

First you need to attach the armrests, then assemble the seat frame and secure it with screws.

After this, we assemble the backrest by simply snapping the protective back panel and the inner surface of the backrest together. The chair is ready!

Reupholstering an office chair at home is not at all difficult.

It is only important to choose the right material for the upholstery and take measurements. It is cheaper to do it at home yourself than to pay for repairs in a workshop. A refurbished chair will delight you for many years to come!

Making your own chair

The sequence of making a chair yourself looks like this:

It is necessary to cut out the bases for the back and seat from a sheet of plywood. Also, if this is intended by the design, you can also make a base for the armrests. The resulting elements will need to be sanded. It is always worth considering the weight and height of the future user, as well as the design idea.
Using a welding machine, you need to make the base of the chair. This can be a classic style with four legs or a more intricate model. The main thing here is the stability and reliability of the structure. The material can be metal pipes, angles, profiles or channels.
Making a chair yourself means there is no height adjustment. Therefore, it is necessary to calculate in advance the optimal dimensions, taking into account the diameter of the wheels and the thickness of the foam rubber.
As for the back of the computer chair, here you can adjust the height. Whether this function is needed or not is an individual question. The fixed version is simple to make: a metal profile in the shape of a cross or rectangle is attached to the base with bolts or it can be welded.
The design that allows you to adjust the backrest looks a little more complicated. Here it is necessary to make an adapter. The frame is made on hinges, and slats with holes are attached to the back. Bolts are installed to the seat. As a result, you should get a structure of two fixation strips.
The presence of armrests is also determined independently. They are attached to the base by welding. Their shape should resemble the letter “P”. In this case, the upper part of the armrest should be directly under the user’s limb. When taking measurements, it is important to take into account the thickness of the foam.
The next step is sanding the structure. Particular attention should be paid to welding seams.
It is necessary to clean the body from dust and dirt, prime it and apply the required number of layers of paint. After complete drying, you can install the seat and armrests. This is done using bolts or self-tapping screws.
Wheels are screwed to the legs.
A layer of dense foam rubber is glued to the back, seat and armrests. Synthetic padding is applied on top and upholstery material is applied. You can use a furniture stapler to secure the fabric. For cladding, every detail is cut out in advance. Approximately 20 mm of material is left on each side for allowances. The finished backs and seats are attached with the curved edges inward. This way the staples from the furniture stapler are hidden.

Some useful tips:

Old parts of chairs or furniture that are out of order or simply not in use will allow you to save on material. It might even save you from welding work.
Using old upholstery as a stencil will simplify the patterning process.
The presence of a working lift from an unnecessary chair will allow you to create an adjustable structure.
Before you get started, you should evaluate your options and decide whether buying a ready-made chair would be a more appropriate option.

Sofa from an old bath

There is no need to rush to scrap or throw an old bathtub that has served its purpose into a landfill. It will make a very original and comfortable sofa that can decorate the interior of a living room, salon, office or country house.

What can be done from an old bathtub in the country.

An old metal or cast iron bathtub will do the job. Although, preference should still be given to cast iron. It is more stable than metal and has an interesting shape, especially if it is an old-style bathtub. Making a sofa from a bathtub is quite simple. To work you will need:

Cast iron or metal bath; Grinder (Angle grinder) with attachments for grinding and cutting wheels for metal; Paints; Foam rubber for cushions and seating.

First of all, you need to remove the legs from the bathtub and clean its surface from peeling enamel and paint. Then you need to lay the bathtub on its side and draw on it the shape of the frame of the future sofa. The sofa can be given any shape, it all depends on personal preferences. Cut lines can be semicircular, oblique, even or patterned. Using a grinder, you need to cut out the frame of the sofa and sand the cut line. Then the bathtub should be coated with paint. For this purpose, you can choose any paint suitable for a metal base. The legs of the bathtub need to be thoroughly cleaned, painted and inserted into the groove inserts of the bathtub.

In order to make a seat for a sofa, you should take a piece of foam rubber of a suitable shape, wrap it in spandbond or padding polyester, and cover it with fabric on top or insert the resulting seat into a cover. You can also sew pillows yourself or purchase ready-made ones.

How to take measurements and how much fabric to buy?

We have already figured out the correct type and quality of fabric. The amount of fabric can be measured in several ways.

Take measurements from the back and seat. If you plan to add additional foam, you should take this point into account when taking measurements. To the data obtained (length and width of the back and chair) you need to add 5 cm.
The fabric will be attached from the inside, this requires allowances.
This can be difficult since the upholstery is tightly stapled to the frame pieces.
Then you should measure the finished darts, adding allowances for using foam rubber.

Helpful Tips:

It is much easier to make a chair from the parts that you have lying around from old and broken pieces of furniture. Such enterprise and thriftiness will save you from working with a welding machine.
And if you also take the upholstery as a stencil, then patterning the covering will be significantly simplified.
And finally, with a whole lift you can recreate a chair that will be able to be adjusted.

Making a comfortable computer chair from a car seat with your own hands

I chose the car seat for a number of reasons, the main ones being its ergonomics and accessibility.
Finding a car seat of the type and configuration you require will not be difficult: just visit the nearest auto repair shop or go online to a popular portal for the sale of auto parts. To make a comfortable chair out of it with your own hands, you don’t need a lot of tools or time. As a basis for assembly, I used a car seat from a Volga car - one of the most comfortable seats in domestic cars. In addition, it is inexpensive, which allows you to make a chair at minimal cost.

The car seat from Volga is equipped with lumbar and side supports, so you don’t feel tired even after being in it for a long time. But before you start assembling a chair for working at a computer, you need to restore its appearance, which is what I did first.

How to prepare for the process?

Before you grab a saw and hammer, think a few more times: do you need such furniture at all? If you have even a hint of doubt, you can convince yourself by appreciating the undeniable advantages of such a chair:

“Handmade” will allow you to create an original design that will fit exactly into your interior.

You will independently select the necessary sizes that will suit your height and weight.

The quality of the assembly materials and the work itself will depend only on you.

Sounds great, doesn't it? Let's drive doubts away and start making a chair for the computer with your own hands right now.

Conclusion

As you can see, assembling a practical and comfortable computer chair with your own hands is not difficult. Especially when you have all the tools and necessary materials. Depending on the type of car seat purchased, the appearance and functionality of the future seat may be unlimited. After all, no one is stopping you from using a car seat from BMW or Lexus as a base, equipped with massage, heating and many adjustments.

Thank you for your time, write comments, subscribe to the content!

Sincerely, Alexander

Repost and win a laptop!

Every 1st and 15th iBook.pro gives away gifts.

Click on one of the social buttons. networks
Get a personal coupon
Win a LENOVO IdeaPad laptop

LENOVO IdeaPad Intel Core i5, 8GB DDR4, SSD, Windows 10

Wood as the main material

Making a wooden chair can be quite easy if you choose the appropriate method. You can use an old armchair or stool if it is not possible to purchase individual parts. Even from a banquette you can make a small chair that any child will like. To create a classic chair, boards, bars, and logs are usually used. A solid wood product has a number of advantages over other pieces of furniture, because wood is an environmentally friendly material that is absolutely harmless to health.

Natural wood is not a cheap material, but it is the key to the quality of a homemade chair. Once you are confident that the wood is of high quality, you can begin creating a work of art. There should be no knots or cracks on solid wood or bars. All parts must be carefully polished, and only then proceed to assembly. A special coating will protect the material from insect attack and drying out.

To make a chair, it is better to use oak, birch, ash or alder, because they have a unique beauty. These materials allow the product to serve for a long time without squeaking or cracking. The beauty of the product can be emphasized by high-quality textiles that will be used for its upholstery.

Wood is very durable and can compete even with metal. It does not lend itself to plastic deformation and withstands shocks and loads well. It is easy to work with, and therefore you can make a chair from wood yourself. The disadvantages of this material include intolerance to moisture and high temperatures. When exposed to water, wood swells and crumbles, so you need to first coat it with varnish.

Some general information

Whatever one may say, it is a rocking chair, especially one standing in the garden or near a lit fireplace, that many associate with comfort, a pleasant evening in a narrow family circle, peace and quiet.

In such an environment you can have a great rest and relaxation by reading your favorite book or watching a good movie. The rhythmic rocking movements of the rocking chair will help you get ready for sleep and simply feel peace, which is so rare in modern life, filled with bustle and heavy thought processes.

Rocking movements increase concentration

It is still unknown exactly how and where the very first rocking chair came from. Usually many people associate it with old England, fireplaces and rugs. At the moment, there are two main versions of the history of the origin of this chair.

According to one of them, the first rocking chair was invented by the Viennese furniture maker, experimenter and innovator, as well as a fan of bent wood, Michael Thoneta in the mid-19th century. However, there is one more fact that casts doubt on this version. Thus, at the end of the 18th century, the word “rocking chair” was added to the English dictionary, and since the 1800s, such chairs began to be produced by many English furniture manufacturers.

But the fame and peak of popularity of rocking chairs came precisely in the 19th century. They were used mainly by rich and aristocratic people, as well as those involved in literary and artistic arts.

According to the second version, the rocking chair was invented by Benjamin Franklin. In terms of time, this was also the 19th century. But there are those who refute this version, believing that Franklin was just the one who became the first owner of the rocking chair.

In a word, we can say that the beginning of the history of the chair is the 18th-19th centuries. The sources are silent about the rest. And, nevertheless, rocking chairs still remain popular and in demand, and are primarily intended to create a special ambiance and comfortable environment in a certain place.

The rocking chair has its own history

Where can it be used?

A rocking chair in general can be installed anywhere, be it a room or a veranda in the garden. But most often it can be seen in a spacious living room in a private house or in the garden. In the latter case, rocking chairs are often made of either metal or rattan.

The products are characterized by increased strength; when properly processed, they are not afraid of water, are durable and can really not only decorate the garden, but also create a real relaxation area in it. Moreover, the rocking chair will feel great both on the veranda and on the lawn or garden path, where it will not disturb anyone.

Also, rocking chairs fit perfectly into the interior of large and spacious rooms, especially those made in a certain style. Of course, with modern design solutions, you should abandon the traditional rocking chair, but a stylized chair will fit even into a high-tech room.

Types of rocking chairs

A rocking chair is a comfortable, useful item that can be easily placed in almost any room or even a country garden. Such furniture is used mainly for relaxation of people of different ages.

Main types of swinging chairs:

massage – used for healing, as it is equipped with massage rollers and vibration elements;
on radius runners - the most commonly used option, as simple as possible to assemble, but if it swings too much, such furniture will fall;
on elliptical skids - the product is equipped with bumpers that prevent it from tipping over;
with variable curvature - almost any landing height is allowed here, the likelihood of an object overturning is low;
multifunctional - this is a “three in one” design, with an adjustable backrest, which can be converted into a bed if necessary, therefore it is used only in large rooms;
glider is an item of increased comfort that has a special footrest, soft armrests, and other elements.

A wicker rattan chair will become an indispensable attribute of a country veranda, a soft one, upholstered in leather, will be located in the office relaxation area.

The reupholstering process: step-by-step instructions

The process itself is not complicated, it is easy to cope with alone.

The first step is to disassemble the chair. To remove the backrest, you need to turn the screw at the back (with a large head); you can remove the back panel by opening the latches (by carefully pulling each corner).
To disassemble the seat yourself, you need to turn the chair upside down. Unscrew the screws and detach the armrests.
It is better to put all the screws in one place, so that by the end of the chair repair you simply do not lose them. Now you can start re-upholstering.
The old upholstery must be separated by removing the staples.
Staples that need to be removed.
Next, you need to apply foam rubber and cut it along the contour of the chair, then nail it with staples.
We cut out the foam for the seat of the chair.
Handle the stapler carefully; this tool is quite powerful.
Stretch the new upholstery, securing it to the back of the seat base and backrest.
The outlines of the chairs are rounded, and this should be taken into account when reupholstering an office chair so that there are no folds in the fabric. Excess “tails” must be cut off.

Of course, making furniture yourself is an expensive business, but it is several times cheaper than purchasing products from a specialized store. But you can cut costs, for example, by using a lift from an old chair, as well as wheels, adjustments and fasteners. But in the end you will still get a unique thing that no one else will have.

Why do you need play furniture?

Modern humanity can no longer imagine its existence without IT technologies and modern gadgets. Coming home from work or after school, you want to escape from the everyday problems of the outside world and, sitting comfortably in your favorite chair, immerse yourself in the virtual world of games and entertainment. In order for such a vacation to bring complete pleasure, and damage to health to be minimized, it is necessary to properly arrange the playing area.

A standard computer chair is not entirely suitable for these purposes, despite the fact that it is also quite comfortable. It is perfect for short work at the computer, but not for hours of gaming gatherings. A special gaming chair is an improved office chair, which, thanks to its comfortable and reliable design, ergonomics and high functionality, will give you not only comfort, but will also allow you to completely immerse yourself in a real world of amazing adventures.