DIY wooden throne: step-by-step process and video instructions

Step-by-step instructions for manufacturing

The manufacture of the throne will depend on where it will be used. You can consider the manufacturing process of the most common product for New Year's celebrations. For decoration you will need white wallpaper, fabric or cardboard, a ruler, a regular pencil, scissors, glue, foil (metallic or blue), and tinsel. You can also add ready-made New Year's rain to the decorations. The work process itself will not take much time:

We take thick cardboard, measure the corners and cut them.
Next, we assemble the “pattern” of the product.
On the top side of the “pattern” we cut out the corners. The corners will resemble pointed ice floes, as in the fairy tale about the Snow Queen.
Additionally, you can cut out patterns inside the top of the “pattern”.
We glue all the pieces of cardboard together and put them on the chair.
Next, we decorate the back using white wallpaper, cutting out the patterns prepared in advance.
We glue the back of the product with tape to the chair.
We decorate the product with tinsel, rain or colored paper. Additionally, you can glue snowflakes or sparkles.

You can also consider another decoration option, a more complex one. It will take about three days to make it, but the result itself will exceed all expectations if you do everything according to the instructions. In this example, we use a regular wooden chair without upholstery. Follow the following sequence of actions:

We sand the chair with medium-hard sandpaper.
Fill the holes from the screws if they are visible.
Prime the surface of the furniture. For simplicity, you can use a diluted solution of PVA glue.
When the solution has dried, cover the chair with dark brown enamel.
After the enamel has dried, rub it with wax.
Next, we cover the surface with two more layers of white enamel.
We decorate the chair using stencils. You can, for example, use roses or any other flowers. The paint color can also be chosen to suit every taste. Absolutely any color looks beautiful on a white background.
The final touch is to varnish the chair. Now it looks like a real throne.

We hope that this article will be useful for creating new interior solutions. After all, with the help of the simplest and most inexpensive materials and tools, you can revive any furniture. Even an ordinary chair can easily turn into a throne.

Armchairs are integral functional elements of modern interiors. In addition, such products perfectly complement the design of the room, bringing comfort and coziness to the environment. One of the most interesting and unusual options is the throne chair. Previously, such elements were often used to furnish spacious rooms in expensive houses.

Royal lace crown

Beautiful carved lace braid 40-45 cm long. The length depends on the desired diameter of the final product. PVA glue. Wax paper. Gold, silver, bronze or other colored spray in a can. Or acrylic paint. Glue Crystal-moment or hot melt glue. A sponge or cloth for applying and wiping off excess glue.

We place our lace on wax paper and coat it with PVA glue 2-4 times until completely dry. After complete drying, paint the workpiece in the desired color. Each layer of paint must dry well. Glue the crown along the edge, matching the pattern. We use hot melt glue or Crystal Moment glue. We decorate the crown as desired. It can be gold or silver:

Or match the tone of the royal outfit: soft pink, yellow, blue.

Materials

Do-it-yourself wooden armchair
In the production of high-status furniture, only the best materials are used. The frame and legs are made exclusively of wood; a throne chair in this design looks massive, expensive, and aristocratic. Of course, elite varieties of red and black wood are used: cherry, walnut, oak, cedar, ash, Karelian birch, as well as exotic species, for example, wenge, zebrawood. The choice falls on them for a reason: expensive wood not only looks more impressive, it is also extremely strong and durable. Craftsmen love it for its flexibility when molding and decorating: paint and varnish will lie smoother than on pine, and a thin layer of gilding will not “fly off” after a few years.

The upholstery, for which dense, expensive materials are used, is not inferior in beauty:

Jacquard. This is a large-patterned fabric that combines dense matte material and a pattern embroidered on it with silk thread. One of the disadvantages is that jacquard is susceptible to the formation of puffs. To maintain the ideal appearance of the upholstery, you need to look for a material with a special treatment that prevents the formation of defects.
Velvet. The name speaks for itself. Soft, pleasant to the touch fabric, with a characteristic pearlescent shimmer. It looks expensive and elegant.
Genuine Leather. The most durable material of natural origin. Emphasizes the status of the owner of the throne chair, often complemented by natural fur trim.
Leatherette. Chairs made of this material are quite rare. The leather substitute has a presentable appearance, but is inferior in practicality and durability to natural raw materials.
Chinese silk. Although in appearance this material is quite fragile and impractical, natural fabric has a high density and is resistant to creasing.
Tapestry. A fabric with a variety of patterns, obtained by complex weaving of wool, cotton, silk, silver or gold threads. It is distinguished by increased wear resistance and a large selection of ornaments. This material does not require special care and has antistatic properties.

Often, the upholstery of the throne is decorated using a carriage screed and is additionally decorated with rhinestones, precious stones, and buttons made of precious metals

That is why the density of the material and its texture are of no small importance, and natural cotton and flock are not used in the manufacture of chairs

Historical reference

Options for making a chair with your own hands, diagrams and drawings

The chair as a piece of furniture appeared many centuries ago. At that time, the throne and the chair were essentially the same thing. It is believed that the first throne chairs were used by the Egyptian pharaohs. Such furniture was found in their tombs. At first these were thrones made of wood; they could hardly be called very comfortable.

Gradually, the fashion for thrones captured almost all countries. But initially such furniture could only be found in the homes of rulers; later, majestic chairs in the form of thrones began to appear in the homes of wealthy subjects. Upholstering thrones with fabrics was first invented in France. Royal seats were upholstered in silk, velvet, and tapestry. They also came up with the idea of making soft down pillows for the thrones for greater comfort. Later, the backs and armrests began to be turned into real objects of applied art: craftsmen carved elegant patterns on them.

The 20th century was famous for its practicality, so elaborate thrones disappeared into oblivion at that time. However, nowadays they are back in fashion.

Upholstery materials

How to make wooden chairs with your own hands: drawings, photos

Thanks to the French, the word throne does not evoke in modern people associations with medieval inconvenient “boxes” of gold. All accompanied by soft seats, luxurious upholstery and cushions.

The following are used as covering:

Real silk. Dense, wrinkle resistant. The shine is moderate. The material can be woven with iridescent colors. A characteristic symptom is coolness in the heat and a feeling of warmth in the cold.
Jacquard. A very beautiful fabric with a two-color complex weave of threads. The combination of shiny silky fibers with matte fibers gives a volume effect. The pattern is double-sided and the fabric is suitable for re-covering. Similar to brocade, but softer and weighs much less. Choose options with anti-claw impregnation, since jacquard is not resistant to the formation of puffs.
Velvet. We love it for its softness and pearlescent shimmer. But the fabric accumulates electricity, attracting dust. Like any textile with pile, it becomes bald and worn out over time. Can be replaced with denser plush or velor. All these materials drape amazingly beautifully.
Natural fur or leather. The quality is guaranteed to be top notch. All that remains is to take care of the appropriate care.

Table decor

And, of course, what is a holiday without a feast? Even if the hero of the occasion does not sit with everyone at the festive table, table decor is an important component of the holiday design. Prepare an elegant tablecloth and cutlery in advance. And you can read about the beautiful details of table setting in our article “

Even from an ordinary chair you can make a real throne with your own hands. And its main feature is its chic and catchy design. Such chairs are used as interior decoration, for special events and holidays. Many details of these chairs are made by hand. It can be either bright fabric or carving. Styles with elaborate designs include Baroque and Rococo. Transforming an ordinary chair into an armchair in this style will not be difficult.

Source

Color options

DIY wooden chest

The coloring of the throne chair is designed to perform several functions at once. Furniture is part of the design of the entire room, it should echo it and fit harmoniously. At the same time, with the help of colors, the master emphasizes the high cost, uniqueness, and grandeur of the decoration. Such a massive object cannot stand modestly in the corner; its very appearance should emphasize the status of the owner. Wood is often treated with varnish and dark paints, which increases the effect of solemnity. Gold and silver plating, as well as a patina coating, add pomp.

The shade of the drapery directly depends on the color palette of the room. Red is considered the most popular; dark, deep and rich colors are also used. Noble emerald and solemn white are no less in demand. The owner may also give preference to non-standard colors.

Characteristics of the material

The use of wood for making chairs has a centuries-old tradition. What justifies such popularity? Let's figure it out:

Advantages

Environmental friendliness. Wood is a natural material that does not have any toxic emissions.

Children's wooden rocking chair

Aesthetics. The surface of such material has a texture created by nature itself, which guarantees its uniqueness, and the ease of its processing provides ample opportunities for the master to create the most beautiful and convenient design.

Even such unusual objects are possible

Reliability. The finished structure, made according to all the rules, will support the weight of even a very large person.
Assembly instructions available. Of course, you most likely won’t be able to make a real throne without the proper skills, but a simple chair without any frills may well work out.
Easy to care for. Wood does not have high electrostaticity, which eliminates intensive accumulation of dust. If the surface is dirty with something, the dirt can be removed with any detergent.
Pleasant tactile sensations. Wood has optimal heat capacity, which is why it is always warm to the touch.
Durability. A well-assembled product will serve you for decades.

Flaws

But do not forget about some of the disadvantages inherent in wooden chairs:

Quite a high price. Products made from natural materials are distinguished by their high cost. But, as they say, quality is worth paying for.
Possibility of defects in the form of knots, resin pockets or cracks.
Hydrophobicity. Excessive moisture can damage wood.

Color options

Manufacturing Instructions

Now let's try to look at the process of creating various types of wooden chairs. Considering that there are different types of chairs - a lounger, with a backrest or a “shell”, it is correct to consider the process of their creation in the context of placement on different objects and creation from different materials. In particular, we will consider a universal option that can be placed in a country house or in a house, and a chair model made from pallets.

Dachnoye

Specifically, to create this type of chair, you will need to have on hand:

connecting bar;
additional bar;
back;
2 armrests;
4 legs.

These parts are first cut out of cardboard, after which they are transferred to wood and the elements of the future structure are cut. When this is done, you can begin to create the frame of the future chair. Before starting assembly, all components must be very carefully treated with a special antiseptic, which prevents the appearance of fungus. Now all parts should be dried.

After all structural elements have dried, it is necessary to begin adjusting the parts to the required dimensions, which are specified in the drawing documentation. Here you should also make markings for the holes intended for fastening. Now we take a drill and drill holes where the fasteners will be inserted, after which the parts are fixed together.

After this, we fix the back leg of the chair at an angle of 90 degrees. Using the same method, we secure the legs on the other side. Now you need to connect the side structural elements. The end parts of the planks, as well as the ends of the legs located on the other side, must match. This will be the key to the correct location of the entire structure. At the next stage, the supports should be installed, which after installation should be secured in the desired position using special clamps.

Now you should install the backrest guide from above using screws. During this process, it is necessary to adjust it to the crossbar from below. You can mark all the crossbars and parts of the back with a simple pencil, and then make a hole again, holding the bar firmly in your hand.

All that remains is to make the roundings by cutting the boards along pre-marked lines. All that remains now is to sand the surface of the chair using sandpaper. Here you should take this issue responsibly in order to get perfectly even and smooth wood without any burrs. After this, we treat the chair with drying oil and several layers of varnish and let it dry.

Shell

Now let's move on to looking at creating a shell chair.

In this case, you will need to have skills in using a tool such as an electric jigsaw. To maximize time savings, the movement of the jigsaw should be as smooth as possible during cutting, so that there are no stops or accelerations. Each jerk will definitely leave a mark, which will take up time for polishing in the future. Vibrations should also be avoided during cutting so that the quality of the cut is as high as possible. Otherwise, you will again need to spend a lot of time sanding the defects.

After the parts are cut out according to the drawings, they need to be varnished. First, you should very carefully sand all the chips and uneven cuts. Depending on the size of the defects, different abrasive cloths should be used. If there are very large cracks, they need to be puttied. The putty should be selected exactly to match the plywood or made independently. If the second option is chosen, then it is made from sawdust, PVA glue and a small amount of chalk.

The surface should also be thoroughly cleaned of dirt and dust. And the plywood must be completely dry. You should also choose a good varnish. We are talking about a varnish that will not lift the veneer pile, which can have a very negative impact on the appearance of the future chair. You should not skimp on layers of varnish. There should be at least 2 of them. And it is better if there are 3 of them.

When the parts are completely ready for assembly, they should be fastened together using wood glue. Until it dries completely, the parts can be pressed together using clamps. If for some reason you don’t want to use only glue, you can also use self-tapping screws. The only thing is that then you need to recess their heads as much as possible into the structure so that they do not peek out and do not create a risk of tearing clothes when sitting on such a chair. Or you can use self-tapping screws with decorative heads. Note that the method of creating such a chair will be practically no different from creating a regular chair made of wood.

Ice accessory

This crown has a “candy” effect due to the use of non-standard material.

To work on the product you will need:

transparent PVC film or plastic (you can take old document covers);
tulle with silver pattern;
cardboard;
shiny fabric (silver look);
thread, needle;
scissors;
thin wire;
silver braid;
elastic band 2 cm wide;
hot glue;
decorative elements (for decoration).

First of all, the circumference of the head is measured. Based on the obtained measurement, you need to calculate the width of the base of the vertices of the future crown. There are seven of them in the product.

The height of the triangles is selected individually. You just need to take into account that the central triangle will be the highest. The parts adjacent to the central part are cut 2 cm shorter than the main part. The next two triangles are 2 cm lower than the previous ones, etc. Based on the principle described above, 7 triangles are cut out of PVC film. The same parts are cut out separately from tulle.

A corresponding tulle detail is applied to each workpiece. A wire is sewn along the edge of the blanks using an overcast stitch. All triangles are framed with silver braid. It is advisable to bend the figures slightly so that they hold their shape better. The finished transparent parts are assembled with elastic. The most convenient way to do this is on a sewing machine. The ends of the product are connected into a ring.

To create a volumetric effect, you need to complement the crown with opaque elements. To do this, two triangles are cut out of cardboard. Since these parts will be located on the front of the crown, their height should be slightly lower than the transparent triangles.

Cardboard blanks are covered with shiny fabric and secured with safety pins to the front “ice pieces” of the crown, as in the photo.

Dense and transparent parts are attached to each other. All that remains is to decorate the crown to your own taste. You can use rhinestones, beads, sequins, and lace elements in your work.

The royal ice accessory is ready.

Materials

The frame, legs and other elements of the throne chair are made of expensive wood - red or black. They have high aesthetic qualities, serve for a long time and allow carvers to realize their artistic vision. In ancient times, the throne might have looked like a wooden box with a back, but over time its design became more complex and comfortable. With the light hand of the French, medieval models received soft upholstery. We list the main materials that are relevant for the finishing of thrones today.

Velvet. This fabric, pleasant to the touch, does not have high wear resistance, however, velvet has firmly established itself as the leader in finishing materials for this furniture.

Drawing adaptation

The easiest way to make a drawing of a chair with your own dimensions is to rework an already finished one. To do this, you need to replace the inappropriate parameters (the length of the leg from the floor to the seat and others) with the necessary numbers, and then draw a diagram according to the new input

To do this correctly and avoid distortions, it is important to take into account the proportions of each element and know exactly which parts should be identical and which should not. Another important nuance - when replacing sizes, you must respect the scale

There is a second option to get a drawing of chairs with a back - enter your parameters into a computer program, which itself will draw a diagram.

Rework a ready-made drawing, taking into account proportions and scale Enter parameters into a computer program, which will draw the diagram itself

Interior use

You need to be very careful when using a throne chair in an interior. In this matter, you need to focus on the style of the room, since there is a risk of completely disrupting the balance in the environment

For example, if the living room is designed in the popular Provence style, a throne chair would not be a very appropriate addition.

As noted above, this furniture is suitable for interiors in Rococo and Baroque styles. Basically, they are used to decorate spacious rooms that can accommodate a large number of large items.

For example, the design of a room can be complemented with a model with white upholstery and gold inserts. A chair decorated with floral patterns would be a good choice. Models in dark shades are best used for a more restrained interior.

Frame kokoshniks

An original kokoshnik hat in the shape of a green spruce is an excellent themed accessory for celebrating the New Year. Extravagant, stylish and to the point!

You can make a kokoshnik professionally according to the following scheme: make a frame from wire, cover it with a base fabric, glue brocade to it using paper clips, decorate the kokoshnik with pearl thread, sparkles, rhinestones and bugles, and tulle.

You can combine a frame kokoshnik with a cardboard one. Make carved designs in cardboard and glue translucent fabric over it. Decorate to your liking and the kokoshnik is ready!

And this kokoshnik would look great on the head of Nastenka, the heroine of the fairy tale “Morozko”.

We make a real costume for the Snow Queen from a wire base and fabric decor. We decorate the outfit in the same style. The stand-up collar with large “cold” decorations is especially chic.

List of sources

podelki.org
www.maam.ru
obrazovaka.ru
setafi.com
liceiblok.ru
knittochka.ru
DekorMyHome.ru

Materials

Only the best materials are used in the production of high-status furniture. The frame and legs are made exclusively of wood; a throne chair in this design looks massive, expensive, and aristocratic. Of course, elite varieties of red and black wood are used: cherry, walnut, oak, cedar, ash, Karelian birch, as well as exotic species, for example, wenge, zebrawood. The choice falls on them for a reason: expensive wood not only looks more impressive, it is also extremely strong and durable. Craftsmen love it for its flexibility when molding and decorating: paint and varnish will lie smoother than on pine, and a thin layer of gilding will not “fly off” after a few years.

The upholstery, for which dense, expensive materials are used, is not inferior in beauty:

Jacquard. This is a large-patterned fabric that combines dense matte material and a pattern embroidered on it with silk thread. One of the disadvantages is that jacquard is susceptible to the formation of puffs. To maintain the ideal appearance of the upholstery, you need to look for a material with a special treatment that prevents the formation of defects.
Velvet. The name speaks for itself. Soft, pleasant to the touch fabric, with a characteristic pearlescent shimmer. It looks expensive and elegant.
Genuine Leather. The most durable material of natural origin. Emphasizes the status of the owner of the throne chair, often complemented by natural fur trim.
Leatherette. Chairs made of this material are quite rare. The leather substitute has a presentable appearance, but is inferior in practicality and durability to natural raw materials.
Chinese silk. Although in appearance this material is quite fragile and impractical, natural fabric has a high density and is resistant to creasing.
Tapestry. A fabric with a variety of patterns, obtained by complex weaving of wool, cotton, silk, silver or gold threads. It is distinguished by increased wear resistance and a large selection of ornaments. This material does not require special care and has antistatic properties.

Often, the upholstery of the throne is decorated using a carriage screed and is additionally decorated with rhinestones, precious stones, and buttons made of precious metals

That is why the density of the material and its texture are of no small importance, and natural cotton and flock are not used in the manufacture of chairs

Velvet

Tapestry

Jacquard

Chinese silk

Leatherette

Genuine Leather

To make the “ice” on the rocks shine brighter

Along the perimeter, carefully bend the plastic with the pointed “rocks” to create the shape of the castle’s mountainous surroundings. Later, glue the entire fabulous installation with tape to cardboard or any other base.

About the rocks... Let the kids rummage through mom's supply of nail polish and choose a white one with glitter. They will use it to cover the rocks at least partially with this original paint.

The thickened varnish will create relief on the rocks, they will turn as if into flows of real ice.

Attach pieces of padding polyester to the top and sides of rocks and ice; this material will imitate fresh snow. You can also cover part of the castle with it.

In a word, the more snow and ice, the closer your interesting handmade is to the composition of “The Snow Queen” by H.H. Andersen.

In the screened fairy tale, everything around shimmers with color, and not only white, but also other colors, because this is the north and there the refraction of the sun’s rays creates a lot of them.

You, young needleworkers, can do the same. Take an old computer disk, cover it on both sides with double-sided tape, and cut it with tailor's scissors into pieces that look like fairy-tale shards.

And carefully remove the tape, leaving a sticky film. But only on one side. The second will be based on the color of the adhesive tape coating. They will shimmer on it with all the colors of the rainbow. Use drops of glue to strengthen them around the Snow Queen's castle without rules, even chaotically.

GAME OF THRONES / DIY Hand of Jaime

I used a hand made of plasticine as a basis.

I covered it with newspaper + PVA, using the papier-mâché technique. I took it off, glued the body together, and strengthened the seams.

I went over it with primer, then putty. I used sandpaper. I transferred the design to my hand and picked out the ornament.

The shagreen effect was created from semolina, attached to the same PVA. Decorated with a button and decorative cord.

Primer and paint again.

I made the hand guard from old leather boots from Avito, for three kopecks.

Detailed ️ VIDEO ️ TUTORIAL There you will find: How to make the second part of the bracelet, how to attach it to a loop, how to make a loop. And also detailed footage of the entire process of creating a hand with explanations!

Hi all! I really need advice from the collective mind)

He lived like everyone else. Wife, children, work. Again, beer on weekends, nothing foreshadowed trouble.

My curiosity led me to etching stainless steel, but what? The metal is beautiful, hardly scratches, and shines with a chrome-nickel light. And most importantly, it is difficult to process, so no one does it, like brass, for example.

Rate my samples of the pen (criticism is welcome!)

Game of Thrones. House Stark emblem. Artistic etching of stainless steel on a plaque, stained oak color. Clear detail of each character and natural shine of steel.

The technology is still crude, it needs to be brought to mind.

I have made several products, but I am sure in which direction to move next.

If you like this work, I’ll show you the rest) Otherwise maybe only I’m delighted)))

Now, think and write what ideas were born in your bright heads. I'm looking for an idea that can touch the soul and heart.

Those ideas that I like, I will definitely implement and give them to the person who suggested them.

Write everything! Don’t be afraid to be misunderstood... I’ll definitely make a post on this topic. If you support me, of course.

According to technology, there is nothing secret... Write, I will try to answer your questions (if possible)

Progress of the first lesson:

1.1 Organizational moment. Before the start of the lesson, students take their seats. Each student who comes to class prepares a workplace. Greeting children. Announcing the topic and purpose of the lesson. The topic of the lesson is “Illustration for a fairy tale. "The Snow Queen"

1.2 Introduction to the topic. Repetition of covered material.

Teacher: “Let us remember the fairy tale by H. H. Andersen “The Snow Queen.” Remember how in the evening just before going to bed, Kai wanted to take another look at the snowy street. “White snowflakes were swirling outside the window. One snowflake fell on the edge of a flower pot and began to grow quickly before Kai’s eyes. She grew and grew, and Kai suddenly saw that a dazzling beauty was standing in front of him.” Who was that?

Students: The Snow Queen.

Teacher: The Snow Queen is the main character of the fairy tale. We have already prepared sketches of our illustration for the fairy tale, the main figure of which is the Snow Queen. The image of the Snow Queen can be drawn based on a human figure. It is customary to take the head of the person depicted as the unit of measurement for the human body. It all depends on the age and development of the human body (Appendix 1)

.
How many “heads”
are there in a woman’s figure?

Students: Answer options.

Teacher: Correct. In a female figure and a short adult, the head fits into the body 7 times. In small children, the head fits into the body 5 or 6 times. Before drawing a person, you need to outline his dimensions, his frame.

Teacher: Guys, check how many “goals”

fits into the figure you drew?
(check with the template prepared in the last lesson)
Teacher: Correct. Well done everyone.

Teacher: Let's look at illustrations by different artists for the fairy tale of the Snow Queen? (Appendix No. 2)

What colors did the artist use, warm or cool? Why? Name cool colors.

Teacher: Correct. Children, now we will create new colors and shades for our Snow Queen using cool colors. How do you imagine that? The teacher creates a problematic situation. Guys, there is only blue paint on the table. How to get cool colors and shades?

Student: Mix the paints.

Teacher: If white paint makes friends with blue, what new paint will you get? (blue)

.
If blue paint makes friends with purple, what new paint will you get? (ultramarine)
.
If ultramarine paint makes friends with ruby paint, what new paint will result? (purple)
.
(Appendix No. 3)
Student: Answer the questions.

1.3. Formulation of the problem.

Teacher: We mix cool colors on the palette with white and put them on the background of our drawing. Apply the paint with a large brush. We cover the sheet of drawing from top to bottom, moving the hand horizontally.

1.4 Completing a creative task.

The task is completed in stages through verbal and visual demonstration methods of work.

1.5 Finger gymnastics “Warm your palms quickly.” Conducted during a creative task (2 min)

Making the Iron Throne

Today I will tell you how to use 9 bags of skewers and a piece of wood to make the best gift for a fan of A Song of Ice and Fire and/or Game of Thrones.

The components are simple; you can buy a small wooden chair (without chiseled peaks) at a store selling goods for non-handed creatives:

I had a whole toy bench next to me, so I had to saw off the extra half from it.

Next, after a big banquet, take with you not only unfinished alcohol, but also skewers for canapés. These, in the form of standard swords, are better suited:

We prepare the skewers, bite off the protective bracket from the handle.

The most crucial moment is coming. Using claws and snot from our hands and glue, we begin to create the back of the future iron throne:

We take the last living dragon and melt the Valerian plastic in the flames of its breath.

If you don't have a dragon, a regular candle will do, but be careful when working with fire! The heated skewer bends easily and takes the shape we need:

If the resulting color scheme does not suit you, then you are intolerant! Go to the sept and pray to the Seven. On the way back, buy paint at the store (the ashes of the dead were used here, acrylic dazzling metallics):

The throne is ready, you can begin to rule the Seven Kingdoms!

As I understand it, this is the first of two thrones made from sharpened swords? Looking forward to the next post, subscribed.

Well, personally, the serial interpretation seemed so-so to me... this option is cooler, in my opinion)

Making an iron throne for a child under one year old?

Cool, at first I thought it was all made of nails.

Building a castle

First, cut out the conditional entrance to the palace with two vertical contours, and on top, using scissors, click notches of different sizes, like hanging icicles. Then turn the cake pan upside down.

Along the contour of the lid, cut out a “floor” in the castle from polystyrene foam, cover it on top and sides with “ice” in the form of a sheet of food-grade aluminum squeezed by hand. Glue the floor. This is how the craft of the Snow Queen's castle began.

An ice coating in the form of PVA glue, popular with children, also appeared on the entrance side. Part of the “building” was doused with it. A hint on how best to do this, this glue is snow-white, but its drawback is its very liquid consistency.

The way out of the situation is quite simple, at home: mix part of the adhesive mass with white flour, then it will not drain. But add the flour in small portions and mix it with the glue very vigorously to get a homogeneous mass without lumps. As you can see in the website photo, our imitation was a success.

To give our ice an even greater and natural shine, we had to sprinkle the hardening white mass with regular glitter. And the texture turned out completely icy. You can buy this tinsel at any store or stationery kiosk.

Design Features

A royal chair can be recognized even without knowing its features. In the interior it is used both functionally and as a decorative item. The distinctive features of this model include:

Impressive dimensions. The seat is wide, buried in a frame of massive carved armrests. The back is quite high and has a complex geometry.
Curved legs. As a rule, these elements have a small height, but in some cases it can reach 30–40 cm.
Majestic performance. Lots of carved details and scrollwork, gilded plating, expensive quality fabrics draped to perfection. The ability to emphasize the status of the owner is limited only by the designer’s imagination.
Expensive materials. Only high-quality, “status” raw materials are used for production.
High price. Luxurious and unique furniture is an expensive pleasure. Often such models exceed the cost of designer products, especially since mass production of “thrones” is not practiced today.

This furniture can only be used in designs that are characterized by luxury and splendor. An important requirement is also the availability of free space. If these two conditions are not met, the throne chair will look ridiculous.

Majestic performance

Expensive materials

Impressive dimensions

Shapes and sizes

When choosing a throne-shaped chair, you should take into account the variety of shapes and the resulting difference in size:

Low semicircular. It is a luxurious pouf with a figured low back, consisting of 3 – 5 sections. The average height is up to 90 cm, width up to 80, and in depth it can reach 60 cm;
Square with medium back. The width and depth of the chair reach 80 cm. The height will not exceed 105 cm;
In the form of a chair with a high back. The width is 90 cm, the depth is standard (80 cm), but the height can reach 180 cm;
Upholstered chair with a high back. Here the width will be significantly higher and can be 120 – 140 cm. The back can reach up to 2 meters. Depth increases. It can reach 1 meter or even exceed this figure. Such models are always the largest;
With a hood. Such variations with a domed top are often called gatekeeper chairs. The width and depth are quite standard (80 cm each). The height, thanks to the dome, starts from 160 cm.

Color options

Throne chairs

The main feature of the throne chair is its incredibly luxurious design. In comparison with standard options, these products are used in the interior as decorative components. The design of such chairs is quite complex, since the base contains many details that are created by hand. Most often this concerns thread elements.

Working with small parts requires a certain approach, skills and knowledge. It is almost impossible to produce such elements under industrial conditions.

Many modern designers actively use armchairs to create harmonious interiors. Most often this applies to such directions as Rococo and Baroque. This is due to the fact that these styles are the embodiment of pretentiousness and luxury.

The throne chair will fit perfectly into an expensive setting thanks to its unusual design.

When considering the features of a throne chair, you should not lose sight of the advantages of this furniture. The main advantages include:

the furniture has an expensive and stylish design;
Expensive materials are used to make chairs;
The chairs are durable and reliable.

Most often, wood is used as a base for a chair. This is due to the fact that the material lends itself well to processing; its surface can be decorated with carvings. Velvet and leather are used for upholstery. Each of these materials looks quite expensive.

Modern designers offer a modernized version of the throne. It resembles a bean bag chair, but unlike it, there is a frame at the base that allows the product to hold a shape similar to a throne.

In addition to the advantages, there are also disadvantages. The main disadvantage of the throne chair is that it is not suitable for modern interiors. For example, furniture with carvings and velvet upholstery does not fit in with the strict geometric lines of Minimalism.

For example, if the living room is designed in the popular Provence style, a throne chair would not be a very appropriate addition.

As noted above, this furniture is suitable for interiors in Rococo and Baroque styles. Basically, they are used to decorate spacious rooms that can accommodate a large number of large items.

The throne chair will be the perfect complement to artsy and luxurious interior items.

If you decide to complement the interior of the room with a throne chair, but did not find a suitable option in the stores, you can make such furniture yourself. Basically, it is created on the basis of a finished wooden chair and complemented with fabric elements. Therefore, first you need to decide on the design of the chair and select the necessary material.

If you have already prepared everything for decorating the chair, you can get to work. It is best to use models with a high back, so that the final version resembles a throne as much as possible in design.

Stages:

So, first you need to cut out a small rectangle from the filler. This can be standard foam rubber or padding polyester. The piece is fixed on the back of the product, which will provide additional comfort while sitting. Then you need to start creating the case. It is best to use high-quality and “noble” material for these purposes. Organza and velvet are often used to upholster a wooden throne.

Please note that the cover must completely cover the chair. You need to cut a wide strip of fabric and place it around the lower back. You need to tie a bow on the back of the chair

If you want to give the solid wood throne a more majestic look, then use large rhinestones for decoration.

It is worth noting that not only a chair can be used as a frame. An old chair or an office chair with a high back is suitable for this purpose.

To learn how to make an unusual throne chair out of weirdly shaped wood, watch the following video.

Model selection

Furniture products made of wood differ in design solutions, design style, the presence of additional elements and functionality.

Products are divided into models:

with frame and solid elements;
with fabric upholstery and filling.

Models with a rigid structure are durable, reliable, and optimal for everyday use. Wood products of various configurations are placed in guest rooms, bedrooms, and work rooms. A handmade antique chair will highlight the interior. The armrests and backrest can be decorated with gilding, carving, aging and decoupage techniques.

Wooden upholstered chairs are comfortable and aesthetically pleasing, but require regular maintenance. Products are placed in recreation areas, dining rooms, and children's areas. The models are equipped with a durable frame; the upholstery can hide the product completely or individual elements (armrests, backrest, seat). For teenagers, it is optimal to make the back and armrests hard, leaving the seat soft. The height of the filler varies; for soft flooring it is necessary up to 3-5 cm, for medium density – 2-4 cm.

According to their design, the chairs are divided into:

folding;
sliding;
Kentucky;
with a high back;
rocking chairs, etc.

Folding structures are ergonomic, easy to move, and multifunctional. The products are equipped with a folding system, metal brackets, and springs. Furniture can be easily transported to a country house or to outdoor events.

The configuration of the Kentucky chair is original and easy to manufacture. The product is made of durable wood and metal brackets and does not have fabric inserts. The lightweight design is optimal for installation under trees in the country.

Sliding models are multifunctional, ergonomic, and suitable for compact spaces. If necessary, the product becomes a place to relax. The models are complemented by upholstery and a small layer of filler.

Designs with high back support are made solid or padded. A throne chair made of wood looks harmonious in classical and Gothic interiors, Rococo and Baroque styles.

The design of rocking chairs is difficult to manufacture, because... calculations are required, the ability to process wood, to give the bars a rounded shape. The main elements of the product are bases in the shape of arcs.

According to their style, the models are divided into:

classic;
vintage;
Provençal;
Gothic;
minimalist;
in Art Nouveau, Art Deco, etc. styles.

Classic design chairs are distinguished by their laconic, simple geometric formulas, symmetry, and functionality. The backs and armrests can be carved, complemented by upholstery made of jacquard or tapestry fabric. Small gilding of elements is acceptable.

Products in the Provence style are often made of dark or light wood, complemented by fabrics with floral patterns in pastel colors. It is popular to paint wood with white or delicate shades of paint, aging, and patination of surfaces.

Armchairs for the Baroque style are distinguished by exquisite decoration, rounded backs, seats, and curved legs. Upholstery material is used with a smooth, silky texture (silk, velvet, satin).

Furniture in minimalist design and high-tech style is made in strict, laconic forms. Wood can be unpainted or treated with tinted varnishes in white, black, or metallic colors. Microfiber, eco-leather, etc. are chosen as upholstery.

In the Art Nouveau and Art Deco directions, furniture design solutions are made in smooth, curved shapes, and upholstery is made from modern materials (thermo-jacquard, micro-corduroy, Scotchgard, etc.).

For Gothic rooms, armchairs are also decorated in the Gothic style. The furniture is complemented with carvings and graphic ornaments, and can be supplemented with forged decorative elements on the back. The wood is chosen in dark shades with a matte texture.

Cleaning the chair

Frankly speaking, there was an incredible amount of dust under the upholstery. And just think that she was hiding under this cute chair and was not visible. The view was simply terrible, because one hundred percent there is a huge accumulation of microbes and dust mites, which sounds very creepy. Even the foam rubber was disgusting to look at. Anything that couldn't be cleaned I simply threw away until I was left with just one frame, which I also washed and disinfected. I recommend that you do the same with an old chair that you will use for a similar project.

I wanted the place to be a little higher. Apparently land mermaids have sensitive feet, so it's best to have a chair where their feet can swing freely when they sit on it. During the work process, I imagined the most incredible pictures of the underwater kingdom. It seemed to me that I was already starting to think like a mermaid. This helped me get into a positive mood and find inspiration even in the not very interesting work on this piece of furniture.

Plot

One day, an evil troll decided as a joke to make a magic mirror that distorts reality. But his students accidentally broke the mirror, which scattered into thousands of pieces all over the world. One of these fragments hit the eye and heart of a boy named Kai. He was always kind and cheerful, but the magic mirror did its dirty work, and the boy turned into a capricious, evil mocker. With his behavior, Kai greatly upset Gerda, with whom he had previously been very friendly.

One day, Kai, while sledding, clung to the sled of a beautiful stranger. She turned out to be the Snow Queen. She kissed the boy and went with him to the palace.

After Kai's sudden disappearance, Gerda cried for a long time, and with the arrival of spring she went in search of him. He got into the boat and sailed along the river, which took her to a beautiful, cozy house, whose owner was a kind old sorceress. She fell in love with Gerda very much and did not want to let her go. However, even despite the old woman’s magic, the girl went further in search of Kai.

From the wise raven, Gerda learned about the Princess and the Prince, in whose description she recognized Kai. The girl hurried to the palace, but was disappointed - the prince was not her dear brother. Having learned about Gerda's ordeal, the Princess took pity on her and gave her a carriage and a beautiful dress with a fur coat.

Gerda set off again, but was soon attacked by robbers. The chieftain's daughter, the Little Robber, did not allow the girl she brought to her lair to be killed. The Little Robber lived with a Reindeer, who told Gerda that Kaya had been taken with her by the Snow Queen. The little robber decided to let her captive go in search of her brother, ordering the Reindeer to take her to Lapland.

The reindeer took Gerda to Lapland, where a Laplander and a Finnish woman lived. The old women helped the girl find the way to the Snow Queen's castle. Gerda managed to make her way through the army of huge snowflakes to the royal chambers, where she saw Kai. The boy sat in the middle of a huge hall and laid out the word “Eternity” from pieces of ice.

Throne chair - characteristic features

All models have a number of characteristic features:

Back. It is almost always very tall, widening at the top. Can be of any complex shape.
Palace style. Favorites are Rococo and Baroque. There’s nothing you can do about it; they evoke strong associations with royal attributes.
Rich decor. Carving, gilding, inlay, silk embroidery with gold thread. The most unique decoration technologies will appear before your eyes.
Expensive. As expected, you have to pay for luxury. A throne can cost you a lot more than designer furniture. However, this is also custom work.
Comfort at its best. The name “throne” is conditional and has nothing to do with uncomfortable thrones. But the comfort will be off the charts.
The main accent in the interior. Such furniture should undoubtedly occupy a central position in the setting. She will attract the eye without a doubt.

How to make a throne from a chair with your own hands. Master class “Throne for the King and Queen”

Many parents are looking forward to their baby's first birthday in order to make this holiday the brightest and most unforgettable for the child and guests. We'll tell you and show you 7 ideas for interior decor for your first birthday!

Many parents are looking forward to their baby’s first birthday and want to make this holiday the brightest and most unforgettable, because during this year the child has grown so much and learned a lot! The baby may not remember this holiday, but when he grows up, he will be pleased to look at the photographs. This event is usually celebrated at home, among relatives and friends. Nevertheless, try to decorate the interior in a stylish and festive way. Where to begin? We'll give you some tips.

Color options

The velvet upholstery is emphasized by the long fringe on the armrests. The back is decorated with the owner's initials, family coat of arms, or simply a special symbol for the owner. Embroidery will look sophisticated: this option is more suitable for the fair sex.