How to make a paper fish. Step-by-step instructions + 500 photos

paper fish craft
If it is not possible to have live fish, there is always an alternative. Check out 45 great examples of how to make paper fish with your own hands , this is a great activity for children and a good opportunity for parents to practice with their little ones. There are many options on how to make a paper fish for children .

From this selection you can choose a paper fish that is most suitable in terms of complexity or attractiveness, of course, depending on the age of your child. Movable fish and accordion fish, flying and voluminous, made from toilet paper rolls and woven from paper strips, and even a small aquarium with paper fish - nothing is impossible for little lovers of paper crafts.

Easy ways

This is a very easy origami fish pattern. It’s enough to just make an origami fish from a photo. It contains step-by-step assembly instructions. You need to take square colored cardboard, pencils or felt-tip pens.

Fold the sheet horizontally and vertically. Make it in half. Unfold the square and make a bend. It should be in the center of the sheet, among triangles with one vertex. Bend the charcoal triangle along the sides. So the tail appeared. Flip it over and draw eyes with a smile.

Equipment

The size of the fish is also important, it depends on the size of the hook on which it is planned to be mounted.

Foam rubber fish can be equipped with: a regular single hook, offset, double or triple. For easier rigging, it is better to cut the fish on the back.

Invariably, the best sinker was and will be the Cheburashka, although modern collapsible weights can be very convenient if you need to quickly change the bait. The shape is not particularly important, however, it is better to use a streamlined one.

To get better acquainted with this Russian fishing invention, look at the photographs of foam fish.

Note!

• A nod for do-it-yourself winter fishing - how and what to make good gear from. 115 photos and video tips from the pros!
• Do-it-yourself spinners - types, features of homemade spinners and their assembly (100 photos and videos)
• How to minimize fishing costs? Useful tips from experienced fishermen and an overview of current solutions (65 photos)

Make a plan

No more than half an hour is allocated for the lesson.

Each stage of training is divided into several aspects:

• Motivational process - 5 minutes.
• Explanation of the main task - 3 minutes.
• Work with blanks - 10 minutes.
• Three minute break.
• Continuation of work activity - 5 minutes.
• Reflection - 5 minutes.

Natural materials

Chestnuts, leaves, pebbles, etc. are used. The child should have such items in limited quantities. Otherwise, the baby will lose attention to the main work.

The young worker needs to glue the sea pebbles or seaweed evenly. And follow one path in composing a composition.

Individual approach to each child

During preschool preparation, the educational process requires an individual approach. If one child is diligent, you should entrust him with cutting out elements from cardboard paper.

But entrust a real fidget with gluing the details of the composition. This way, the noisy child is involved in a group activity and will not get bored while cutting out appliqués for a long time.

The formation of work fronts depends on several aspects:

• Temperament. Don’t push a slow baby by motivating him with the words “Everything has already been done!”
• Preparation. Not every child and their parents practice appliqué or other exciting activities at home. Therefore, not every child in the group will master certain tasks.
• Initiative. Don’t contradict your child if he wants to draw fish instead of the sea.

Progress

An arsenal of tools in the work process is a key link. After all, nothing can be built without available tools. With the right selection of tools, you are guaranteed a positive result in the end.

Usually, at home, a rectangular aquarium is made, and this is done in this way:

For example, let’s take the manufacture of an aquarium with a capacity of 20 liters. The first step is to measure the glass for the side walls, the bottom and the two remaining sides (back and front).

It is necessary to prepare an action plan so that the glass for the bottom remains inside the vertical glass walls. The glue bonds better in tension.

Popular articles How to replace elastic on shoe straps

All sides of the glass in places of gluing should be taped with masking tape. This prevents the glass from getting dirty between each other.

Note!

A few drops of silicone should be spread on the bottom glass. After some time, you need to cut off the frozen layer of silicone.

The connection of the front and back parts should be carried out on a table that is covered in advance with large-sized plastic film.

Excess silicone should be squeezed out between the connected glasses carefully and carefully so as not to damage the glass. After all the parts are glued, leave them alone for 2-3 hours

After 2-3 hours, an additional layer of silicone glue is applied to the joints so that the structure is a durable, finished aquarium. At the end, remove excess from the seams using a razor blade.

After all the parts are glued, leave them alone for 2-3 hours. After 2-3 hours, an additional layer of silicone glue is applied to the joints so that the structure is a durable, finished aquarium. Finally, remove excess from the seams using a razor blade.

You can decorate the background in the aquarium in different styles. But many resort to ideas of a marine motif, to patterns of algae, to blue and turquoise tones.

Note!

It happens that people hire specialists to develop an individual design for their aquarium.

It is ideal when the background of the aquarium is combined with the fish that swim in the aquarium, as well as with the style of the aquarium. You can decorate the aquarium externally, but in such a way that this decor does not interfere with the inhabitants of the aquarium.

How to Skeleton Leaves

Leaf skeletons, due to their lightness and transparency, look very impressive as decoration. To achieve this effect, you need to resort to a special technique - skeletonization.

What you will need:

• any fresh leaves;
• soda;
• egg dye;
• small container - ladle or pan;
• Toothbrush;
• paper napkins.

How to make skeletonized leaves:

1. Mix soda and water in proportions of 1 to 4 and place the leaves in the prepared solution so that they are completely hidden by water.
2. Bring the mixture to a boil and leave to simmer for 30 minutes.
3. Remove the pan from the stove and remove the leaves, carefully placing them on the table with the glossy side up.
4. Remove excess moisture using napkins.
5. Clean the pulp from the leaf with a brush (this must be done very carefully, the leaves are quite fragile).
6. Rinse the skeleton under water and then paint it the desired color.
7. Leave the painted skeletonized leaves to dry.

The resulting material is ready for use.

Minions

This craft can also be made from lemon. To create it, you need the help of your mother, who will sew overalls for the minion. In addition, you need plasticine and hard salt dough. Further:

• minion legs are made from salt dough;
• until it dries, insert a lemon and cover it with the rest of the dough so that you get a standing figure;
• glasses, eyes and hands of a minion are molded from plasticine;
• they put a jumpsuit on his figure;
• plasticine is used to decorate shoes.

Plasticine fish

Many children enjoy the cutting process. You can encourage them to shape the fish.

For the craft we prepare:

• colorless manicure varnish;
• modeling board;
• plastic knife;
• round vase.
• beads, plastic aquarium plants;
• plasticine;

Step-by-step recommendations:

1. You need to remove the sausage from the plasticine and cut off the third part with a knife.
2. Divide the cut piece of plasticine in half. We make a ponytail on one side. To do this, roll the ball and flatten it. Now use a plastic knife to cut out the desired shape of the tail and draw grooves along it. From the second half we similarly make one large fin and two smaller ones.
3. We take a large piece of plasticine aside and make the body of a fish out of it. To do this, roll the ball and use a knife to form the scales in the form of semicircles.
4. We collect fish. To do this, attach the tail, the upper large fin and the lower small one.
5. We sculpt voluminous eyes. First, we attach two flattened white balls to the fish’s head, then smaller green ones on top of them. Small black circles complement the eyes. To make your eyes shine, you need to paint them.
6. Cut out a mouth at the bottom of the fish's head.
7. To decorate the composition, take a small spherical vase or a small round aquarium. Place beads at the bottom of the container. Place the finished fish in the center and distribute the seaweed around it.

How to make a decorative autumn wreath

You can weave a beautiful wreath from bright autumn leaves to decorate windows, doors, walls, etc. A wreath attached to the front door will delight not only you, but also your guests.

What you will need for the craft:

• flexible branches of any tree;
• dried leaves of different colors (contrasting combinations, for example, yellow and red, look best);
• bunches of red berries (rowan, viburnum, etc.);
• physalis;
• glue;
• spool of strong threads;
• decorative metallized threads;
• small bird figurines for bouquets.

How to weave a wreath:

1. The branches will serve as a frame - make a round or oval wreath out of them.
2. For strength, secure the structure with thread in several places.
3. Wrap the frame tightly with gold thread, leaving small branches free.
4. Glue the leaves to the branches.
5. Attach the berry clusters using thread.
6. Glue or wrap physalis with threads.
7. Finally, attach the birds to the wreath.

A finished craft made from leaves in the form of a wreath can be hung anywhere in the house; it will delight you with its beauty for a long time and remind you of the most colorful time of the year.

Beautiful autumn leaves can be used not only for simple children’s crafts, but also for complete interior decoration. One such product is a fruit bowl.

To make such a vase you need:

• glue and brush;
• inflatable ball;
• petrolatum;
• scissors;
• maple leaves.

Step-by-step instructions:

1. Inflate the balloon to the size you need.
2. Lubricate the surface of the ball with Vaseline, this is necessary so that the leaves do not stick to it during the process and are easily separated from it.
3. Fix the ball in a stationary state, this will make it more convenient for you to make your vase.
4. Glue maple leaves to the ball, having first generously coated them with glue.
5. To make the vase strong enough, you will need several layers of maple leaves.
6. As soon as the last layer is completed, carefully coat the product with glue again and leave for 3 days.
7. Burst or deflate the balloon and remove any remaining residue from the product.

The original interior decoration is ready.

Simple craft for kids

You will need: models of circles from multi-colored double-sided sheets or candy wrappers, glue, a prepared fish template, made by yourself or printed on a printer from the Internet.

Children glue overlapping circles of different colors onto the workpiece (torso). Here the guys will be able to act not very carefully, which will not affect the quality of the application and their mood.

Panel Underwater world

Now we want to offer you an amazing craft that can become a real art object in your baby’s nursery, or perhaps an unusual gift for friends, a teacher, or a kindergarten.

For this craft, you will need a large sheet of blue or light blue colored cardboard. This will be the base of the panel.

Using ready-made templates, make inhabitants of the underwater world.

Print the templates onto colored paper, then cut out and fold along the dotted lines. You should succeed: fish, crab, starfish. Glue the finished paper characters to a sheet of blue cardboard.

You can cut out algae from green paper, and air bubbles from white paper.

Video master class:

Peculiarities

A foam fish or foam rubber is a bait most often used for fishing for predators. Resembles the shape of a small fish

It is made of foam rubber, thanks to its porous structure, the fish does not sink and retains its buoyancy in the water, which distinguishes it from other baits and attracts the attention of toothy predators

Most often pike perch bite, but of course pike and perch. The foam rubber is easily saturated with water, so it must be wrung out periodically.

Foam rubber is a fairly inexpensive material and can be easily processed, so making a foam rubber fish with your own hands is not difficult.

Another task

In addition to helping in construction, it was discovered that polystyrene foam is suitable for creating beautiful and unique figures, crafts, busts, etc.

To create carvings, you need to use only thick pieces or thin plates. If you are considering the option of creating a large figure, then first you need to glue several foam plates together. After the latter have dried, carefully using a special tool, cut out the required shape for the customer.

Another option involves creating crafts from foam plastic for a kindergarten or school institution. In this case, it is possible to surprise school teachers with a non-standard approach and a unique appearance of the figurine itself.

For example, create a small sculpture. To do this, you need to carefully cut it out, putty it, wait until it dries, then paint it, lightly weight it, find a good support, strengthen it where necessary with pieces of wire and voila. Furore guaranteed!

A piece of the sea in a cardboard box

There are so many photos of aquarium crafts on the Internet. Try making a product from an ordinary shoe box, and if you find a base with a transparent lid, then nothing will fall out of it, and the aquarium will turn out like a real one.

Necessary materials for the craft:

• shoe box;
• fishing line;
• buttons;
• paints;
• colored cardboard;
• pebbles, shells for decoration.

Preparation method:

1. Prepare the base for the aquarium: paint three sides with blue paint and the bottom of the box with brown.
2. From colored cardboard we cut out figures of sea animals: fish, octopus, starfish, etc.
3. Glue shells, starfish and pebbles to the bottom of the aquarium.
4. You need to make a small hole in the fish, thread and tie a fishing line.
5. Make cuts on the roof of our aquarium - this way the fish will move inside their house.
6. We pass the other end of the fishing line through the hole and tie the buttons.
7. Glue the octopus and algae to the sides of the box.

You can add new fish to this toy craft every time.