DIY brooch tie: master class from ribbons

Hi all! Summer is coming to an end and it’s time to get ready for school.

Today I want to tell you and show you how to make a beautiful and stylish accessory for your school uniform - a tie brooch made from grosgrain or satin ribbon.

A tie is a fairly fashionable item of clothing that is liked by both young and adult fashionistas. And thanks to the fact that it is attached to a brooch, it can be worn with different outfits, for example, it goes well with shirts, blouses or dresses.

This decoration is quite easy and simple to make, and even a novice craftswoman can cope with this task. Therefore, I suggest you start creating beauty so that you can soon enjoy a stylish new thing.

Kanzashi brooch tie for girls for school uniform (master class)

At school, we require students to wear business attire, so dressing formally and not informally is already a necessity. But I always want some kind of zest, and here a tie brooch will be both in theme and that very zest. So let's get started.

For production we will need: - Satin or grosgrain ribbon 1 cm wide; — A measuring tape or ruler; — Preparation of a brooch; - Scissors; - Lighter; - Glue; — Threads with a needle; - A small piece of felt;

- For the middle, a half bead, rhinestone or any other decoration;

I took a black grosgrain ribbon. Black because this color is universal, and blouses are mostly light and will go well with them.

And grosgrain ribbon, because it is much stronger than satin, there are practically no puffs on it and I like the matte color without shine better, in my opinion it looks more serious compared to satin, but satin also has its place, because it has its own good.

The width of the ribbon I took was 1 cm, but using the same principle you can assemble a tie from a wider ribbon, for example 2 or 2.5 cm.

First you need to cut: 3 pieces of 18 cm. 1 piece of 16.5 cm.

1 piece 14.5 cm.

On each segment you need to find the middle; to do this, you need to fold the segment in half and slightly iron the fold with your fingers. Then straighten it out and apply glue to the middle (I usually use moment crystal, but you can use any other), then bend both edges to the middle and press well so that it sticks.

This must be done with all segments.

Next, we begin to collect the bow. First we connect the longest segments together.

We connect it so that we get an upside down letter x.

Glue the third long piece on top.

Next, glue the middle one onto the big one, and the smallest one onto the middle one.

This is what the preparation should look like.

For the tail of the tie, we need another 18 cm piece. It needs to be folded in half, slightly moving the ends apart.

The ends need to be folded facing each other.
And cut off the ends at an angle.
Be sure to trim the ends with a lighter to prevent fraying.
Apply to the bow and align.
You need to glue it from the back side to the bow and also to each other along the fold.
The brooch needs to be sewn to a small piece of felt.
And then this small piece with the brooch needs to be glued to our decoration on the back side.
Glue the middle to the bow and our tie for school is ready.

My daughter tried it on and she loves it! How do you like this tie? Write below in x.

And if you want to sew a lace blouse yourself, then you will be interested in this master class.
I also recommend looking at the article How to make hair bows.

Source: https://bantomaniya.ru/master-klassy/galstuk-brosh-iz-lent

Ribbon tie-brooch for girls for school

In today's master class, we will make our own tie-brooch from grosgrain ribbons, as well as 2 bows to go with it. This set is perfect for a girl’s school uniform, for example, for Last Bell or September 1st.

To make a tie brooch, you will need the following materials.

We prepare the segments: 2 pieces of gray grosgrain ribbon, size 4x32 cm, 1 piece of blue grosgrain, size 4x30 cm, 2 pieces of gray grosgrain, size 2.5x20 cm. Cut three strips of lace to fit the size of the ribbons, 4 cm wide.

We sew each ribbon into a circle; we sew 4 cm wide ribbons together with the lace.

First, we’ll make a bow from gray grosgrain ribbons, placing the pieces on top of each other, then put a blue piece on top.

Let's make a bow from gray rep, 2.5 cm wide. And sew it to the main bow.

Now we’ll make the tie itself. Take a piece of blue rep, 4 cm wide and measuring 36 cm, and fold it in half. Cut the edges of the tie at an angle and melt it with fire.

Take a piece of gray grosgrain ribbon 2.5x13 cm and put it on the blue piece, fix the tie on top with glue.

We glue a tie under the bow and glue the middle - a brooch or cameo.

Glue the brooch blank from the inside out. The brooch tie is ready.

To complete the set we will make bows in the same style with elastic bands. We will make the bows a little smaller; for this we use grosgrain ribbons of the following sizes.

Gray rep 4x24 cm - 2 pcs + lace,
Blue rep 4x22 cm - 1 piece + lace,
Gray rep 2.5x17 cm - 2 pcs.

When the bow is formed, glue the elastic band.

Source: https://alidiy.ru/galstuk-brosh-iz-lent-svoimi-rukami/

Sequence of assembly of tie parts

Glue the edges of the black ten-centimeter pieces together.
Make a small tie from the remaining seven-centimeter piece, that is, on one side you should cut the edges towards the center at an angle.
This is how it turned out to be a sharp corner. You need to decorate it along the length, gluing lace in the middle with a gun.

As you can see, sewing a tie for a girl for school is not as difficult as it seems at first glance.

The brooch fittings should be sewn to the largest main item.
Glue the tie to the lower front part. Black blanks need to be secured to the sides of the product.

Next, you need to take three identical white blanks and glue them crosswise together.
A black one with a lace ribbon should be placed on top of the white blank and glued. And fix the smallest of the workpieces on it.
The resulting product must be glued to the base. And on top everything is decorated with an elegant brooch or button.

DIY brooch tie. Master class by Tatyana Plotnikova

Home ← Master classes ←

19.08.2015

Administrator

Recently, handmade accessories have become popular, for example, bows, flowers, ties, brooches, etc. from ribbons. In this master class I will show you how to make a tie brooch with your own hands. For this we need grosgrain ribbon and lace 38 mm wide.

Photo 1. We make blanks for the bottom of the tie from ribbon and lace: the length and number of blanks are shown in the photo.

Photo 2. We bend the blanks in half and glue the ends together.

Photo 4. We sequentially glue “loops” of tape onto the longest piece.

Photo 5. Now we cut the blanks for the bow. Length and quantity in the photo.

Photo 6. We bring the ends of the blanks to the center and glue them together.

Photo 7. Using hot glue, we connect all the parts together and then sew them together. then glue the blank with the brooch.

Photo 8. The bow for the tie is ready.

Photo 9. Glue the tail to the bow and the ribbon brooch is ready!

Photo 10. Using curly scissors, cut out an oval from white foamiran and glue it to the tie from the wrong side, thereby covering the junction of the parts. We glue the pin with a small piece of foamiran. We are not lazy to do everything carefully, because... the reverse side should also be beautiful.

Photo 11-13. My ties are brooches.

Share the link to the post on social networks ↓

Source: https://kollekcija.com/galstuk-brosh-svoimi-rukami-master-klass-tatyanyi-plotnikovoy/

Kanzashi brooch tie in master classes (photo and video)

School clothes are a common uniform for educational institutions, which are made from neutral, dark shades of fabric. In order to diversify a slightly boring shape, you can make your own brooch or tie-brooch using the kanzashi technique from satin ribbons.

As an example, two master classes will be offered, the authors of which are Elena Leonova and Tatyana Matrukhan. Their interesting ideas, which are fashionable attributes, will appeal to every schoolchild.

Making a frill tie

black and white satin ribbons, the width of which is five centimeters and two and a half centimeters;
lace;
needle and thread;
scissors;
lighter and glue gun;
metal clasp for brooch.

Cut a satin ribbon, 5 cm wide, into several pieces, namely: two white ones, 18 cm long, one white and one black, 20 cm long. Scorch the edges with fire to prevent the threads from fraying. Now move on to the tape, which is 2.5 cm wide. You need two black pieces of 18 cm each, as well as one black and one white 20 cm long.

Preparatory stage

Before sewing a tie, you need to decide on a pattern and correctly transfer it to paper. Manually redrawing a pattern is a rather complex process, the slightest mistakes in which can cause the product to turn out uneven. That is why it is much wiser to use a printer.

Tie patterns can be found in Burda, Moden, Sewing and Cutting, and Patrones magazines.

The finished pattern must be attached to the fabric and secured with pins or needles. After this, use soap or chalk to outline the contours, carefully cut out the details of the product, not forgetting to leave a couple of centimeters along the edges for seams. Next, similar actions are carried out with the lining fabric.

Tie-brooch for school for a girl made of satin ribbons

Svetlana July 24, 2016

Ribbon brooch tie

Today, school ties for girls are gaining more and more popularity. Such jewelry can be considered brooches.

They look incredibly beautiful with a black and white school uniform, and are usually made in the same color scheme.

To turn a plain white blouse into a festive outfit for the first or last bell, simply decorate it with a tie, like the one shown in this tutorial.

What is needed to create an accessory

Ribbons for creating a tie

For the ponytail, prepare:

white grosgrain ribbon 4 cm – stripes 30 cm and 25 cm;
black grosgrain ribbon 2.5 cm - strip 30 cm;
black lace 2 cm – strip 25 cm.

For the bow:

white grosgrain ribbon 4 cm - stripes 26 cm, 24 cm (2 pieces), 22 cm and 18 cm;
black grosgrain ribbon 2.5 cm – stripes 24 cm (2 pieces);
black lace 2 cm – strip 18 cm;
a stone and a base for it or a camellia - to decorate the middle of the brooch;
a pin and a strip of felt 2 cm by 3 cm.

How to make a school tie-brooch from ribbons step by step:

How to make a tie brooch part 1

Prepare white (4 cm) and black (2.5 cm) grosgrain ribbon, white lace (2 cm). Cut the pieces to the required length. Some black and white parts will need to be combined. For the lower part: white (wider) and black (narrower) stripes 30 cm long, white and black lace stripes 25 cm long. For the upper part: white ribbon and black lace 18 cm long, white and black ribbon 24 cm long (2 segments).
Bend all the pieces intended for the top of the bow (white and black and white) into rings. Glue the edges together, carefully overlapping each other. Then press down each ring with your finger in the central part to create a blank for the bow.
Turn the long sections intended for the ponytail into tongues. Place the back side up, pinch the center with your finger and lift both sides of the piece up.
Also turn the white piece combined with black lace into a tongue. But its length will be shorter by about 2.5 cm.
How to make a tie brooch part 2
Place the top of the two tabs together to create a tie tail.
Attach two black and white blanks to create a bow in the center, moving them diagonally.
Next, attach the white piece and the shortest strip of lace.
Glue the tail.
Tie-brooch
Add pebble decor to the center to make the piece look complete.
Brooch tie from the inside out
Add the last white piece (squeezed ring) from the inside to cover the ponytail attachment point. Secure the back with a small pin using felt.

This tie measures 12 cm by 17 cm. To prevent the accessory from being too heavy, it is better to use a lightweight center.

Shared master class

Svetlana Sorokina

Source: https://hobby-mk.ru/galstuk-brosh/

Step-by-step instruction

How to sew a tie for a girl for school? There is no need for a pattern, since the product is very simple in design. But the sizes may vary depending on what kind of bow tie you ultimately want.

From the fabric you need to cut out a rectangle measuring 21 x 12.5 cm.
Fold it in half along the long side.
Machine sew along the edge.
It is necessary to retreat approximately 5-7 mm from the edge, and the thinner the selected fabric, the larger the indentation should be.
Turn the resulting “tube” out so as to place the seam in the middle. Iron it with an iron and insert a sealant inside.
Turn the workpiece seam side down. The prepared lace should be carefully laid out on top. Next, machine sew it along the transverse edges.
Fold the workpiece in half so that the front side is on the inside. Connect the narrow sections by sewing them on a typewriter.
Now you can turn the product right side out. The seam should be at the bottom, exactly in the center.
The workpiece in the middle must be tied with a strong thread (for example, floss or iris).
Form a neat jumper from the lace and secure it into a ring from the wrong side.
If the tie is black, the jumper can be made from braid or thick black fabric, such as denim. If the tie is a light shade, you can omit the braid (it will be more subtle).
The edges of the denim should be ironed along the long sides towards the center. A braid is sewn on top.
Along the short sections you need to sew a jumper on a machine. Fold the right side inward. A fine zigzag stitch is suitable for finishing the seam. Turn it inside out so that the seam is on the inside.
Cut the elastic to the required length and insert it under the jumper from the wrong side. The edges of the elastic are ground down by hand.

The work is finished. The bow tie is ready!

Now you know how to sew a tie for a girl for school. The main thing is to be patient and carry out all stages of work on the accessory carefully.

Brooch made from grosgrain ribbon - ideas, manufacturing methods

When dressing for school or the office, we are obliged to adhere to the uniform: white blouses, black skirts... This is very boring and quickly gets boring, we want to stand out from the faceless crowd of identically dressed people. Unfortunately, very often this is not permissible.

In search of a compromise solution, some fashionistas began to decorate uninteresting blouses with elegant and stylish brooches. It won’t be difficult to purchase them; stores never cease to pamper us with wonderful accessories.

What if you don’t buy it, but make it yourself, purchasing fifty rubles worth of materials? How do you like this idea?

Let's try and create some amazing grosgrain ribbon brooches. They will transform your appearance, give you an elegant aristocratic look, and it will become the most vibrant and stylish!

Tie-brooch made of grosgrain ribbon

By creating something with our own hands, we begin to create magic. Now it was just a piece of ribbon, a few beads, a beautiful button and suddenly a unique product appeared!

Brooches are the most exquisite accessories that highlight the individuality of their owner. Handmade jewelry has always been highly valued, because it gives the appearance exclusivity and originality.

Remember the old films - the ladies there are often presented as very elegant, sophisticated, and a brooch was always present as the main accessory. Let us also try to create it in the form of a tie, using a grosgrain ribbon as a basis.

Making fashionable kanzashi: getting started

So, we need to make an elegant accessory that can be worn to any of the many school celebrations, and also worn every day. Today the so-called kanzashi are very popular. They are sewn from ribbons and decorated with brooches, lace, rhinestones, beads - that is, everything that the craftswoman or the girl who will subsequently wear this tie wants.

How to sew a tie for a girl for school with your own hands using this technique? I must say that doing this is not so difficult; you don’t even need a pattern.

DIY school tie for September 1st. Video master classes

Before we knew it, the holidays were already over. The hassle associated with the new school year is in full swing: buying school supplies and uniforms for children who have stretched out over the summer. And the guys themselves are actually looking forward to meeting their classmates. By the way, these worries can be pleasant if you approach the matter creatively, which is what most caring parents do.

Of course, not everyone thinks that a harmonious combination of the color of notebooks and a pencil case is an important task, but a neat appearance and neat appearance will only add points to your child in the eyes of teachers. And the mood of children who are self-confident is completely different, and it certainly affects learning outcomes.

Those who love the special solemnity of their outfits have probably paid attention to school ties for girls , decorated with an elegant brooch.

Such a tie for a girl to go with her school uniform can be worn not only on September 1st - it will help you out more than once during the school year. This product resembles the jabot familiar to many, and it can be made not only from measured lace, but also from satin or grosgrain ribbons.

The traditional color scheme for a school tie is black and white, but if your child’s uniform has other colors, but you can include these shades in the decor, you will get a wonderful set.

Making a school tie with your own hands is not an impossible task. Even if you are new to needlework, video tutorials will make it easier to understand the process, because you will see the masters at work with your own eyes.

The tie you see in the photo was made by a needlewoman under the nickname MiLena. For production details, see the link below:

How to make a school tie with your own hands. Video master classes

We have also prepared for you a selection of video master classes on making school ties with your own hands from various authors. Choose your tie and get to work quickly!

1. DIY tie for a girl to go with her school uniform from Olga Ivanova:
2. DIY school tie made from ribbons, master class from Yulia:
3. Kanzashi brooch tie for September 1, video master class from Marina Shuvalova:
4. DIY school tie, master class from Anna Napolska:
5. DIY school tie-brooch for September 1st from Kanzashi Alina Boloban:
6. DIY school tie, master class from Anastasia Kulikova:
7. DIY school frill, master class from Julia:
8. DIY school ties for girls from Lyubov Stasyuk:
9. Master class on making a tie for school from OLya LIgus:

10. School kit. Tie and elastic bands from Tatyana Burakova:

Source: https://www.darievna.ru/page/shkolnyj-galstuk-na-1-sentjabrja-svoimi-rukami-video-master-klassy

Materials and tools

The first thing you need to do to sew a tie with your own hands is to decide on the fabric. You need to select the type of fabric depending on the chosen style, as well as taking into account the person for whom the accessory is being sewn. The following fabrics are most suitable for creating a classic tie:

To sew autumn and winter men's tie models, you can use thick wool. As for colors, the product can be plain or with a complex print. The second option is ideal for dudes. In this case, you need to try to cut the product so that the bright and interesting parts of the pattern are on the front part.

In addition to fabric, sewing a tie requires the presence of:

To make the work easier, the pattern needs to be printed on a printer or transferred to paper.

The classic cutting of a tie is carried out on the fabric at an angle of 45 degrees, that is, on the bias.

Ribbon brooch

A brooch is an exquisite accessory that emphasizes your individuality. Handmade jewelry is exclusive and unique. In this article we will look at how to make a brooch from a ribbon with your own hands.

Types of tapes

Satin ribbons Rep ribbons Transparent ribbons Lace ribbons Velvet ribbons Shiny ribbons

Brooch-tie using kanzashi technique

You will need: blue lace ribbons 4 cm and 2.5 cm wide, grosgrain blue ribbon 4 cm wide, grosgrain dark blue ribbon 2.5 cm wide, flower, scissors, ruler, glue gun, thread, needle, piece of felt, brooch clasp.

Master Class

Prepare 4 pieces of grosgrain and lace ribbon measuring 4x13 cm.
Connect the grosgrain and lace ribbons, then form loops and secure with glue.
Gather 4 loops into a bow and secure with glue.
Prepare 3 pieces of grosgrain ribbon measuring 2.5 x 24 cm, then bend each piece on both sides, connecting the ends in the center, securing with hot glue.
Gather 3 blanks into a bow and secure with glue.
Prepare 2 pieces of grosgrain and lace ribbon measuring 4x20 cm and assemble a bow.
Prepare a piece of lace measuring 2.5x16 cm and gather it into a circle using a thread and needle.
Prepare a piece of grosgrain ribbon measuring 2.5 x 14 cm, then fold the edges on both sides and meet them in the center.
Glue the circle to the center of the folded segment.
Glue the flower to the center of the circle.
Glue the first piece to the second (x-shaped bow with a triple bow).
Glue the third and fourth blanks together (x-shaped bow and blank with a flower).
Glue 2 large pieces together and set aside.
Prepare stripes for the tie: 2 pieces of grosgrain and lace ribbon measuring 4x13 cm and a piece of grosgrain measuring 2.5x10 cm.
Connect the grosgrain and lace ribbons, then cut them diagonally at the bottom and sharpen a thin strip.
Glue the 2 strips together and glue a thin strip in the center.
Glue this blank on the back side at the bottom of the bow.
Prepare a piece of rep and lace measuring 4x26 cm and assemble a double strip with loops at the ends.
Glue the blank to the back of the bow.
Glue a felt rectangle and secure the fastener in it.