What you need to know to master the kanzashi technique
Beginners need to know several principles of operation and style. The kanzashi technique for beginners looks something like this. There are a lot of varieties of kanzashi flowers, you can make the simplest ones, and then move on to larger ones, or immediately try to take on something more complex, but you still need to know a few simple principles and rules.
Do-it-yourself kanzashi technique is an excellent solution to spend time usefully and interestingly. It's especially nice to give a gift to a loved one. After all, a work of art made with your own hands is always a pleasure to give. And it’s nice for a loved one to receive a handmade gift.
Adviсe
If you follow a number of tips, step-by-step making of kanzashkas with your own hands will become not only more comfortable, but also safer.
To do this, you need to adhere to some safety rules and keep your workplace in perfect order.
- First, pay more attention to lighting. Everyone knows that it is better to work with small details in the daytime, when you can get a sufficient amount of natural light. However, not every needlewoman can afford to carve out a few hours of free time in the middle of the working day. Therefore, she has no choice but to sit down to work late in the evening. Of course, table lamps cannot compare to sunlight, although if you try, you can minimize eye strain. Position the table lamp so that you can clearly see the tape and nothing obscures your work.
- Secondly, when dealing with fire or a thermal knife, take care in advance so that none of the household members inadvertently gets burned by them. In general, it is recommended to keep the lighter and candles as far as possible from the ribbons, since they tend to burn well and quickly.
- Thirdly, a properly organized workplace is the key to successful work. This rule applies not only to needlework and everything connected with it, but also to many other areas of our lives. However, many people neglect it, but in vain. Place only the essentials within reach; store other materials and tools in the designated place to avoid cluttering the table.
- Fourthly, complete beginners need to start their first creations, choosing darker and more saturated tapes as a basis. When you first try to twist and burn the petals, there is a high probability that in inexperienced hands the tape will become too smoked and darken in noticeable places.
- Fifthly, the ribbons should be cut in advance into pieces of equal sizes and their ends should be immediately singed.
Material for kanzashi technique
First of all, you need to purchase kanzashi to make the product - these are ribbons. But, as it seems at first glance, this is not all the necessary material. You will also need scissors to cut the ribbons. A ruler to measure the required length. A needle is also on the list of necessities. In addition, you will need threads that match the color of the tape.
In order to seal the ends of the tape and give them smooth and round ends, you need a lighter and tweezers. When the work is done, glue is needed. To hide the connections in the middle, you need buttons or beads.
Required materials and tools
Jewelry using this technique can be made from pieces of silk, organza, satin, brocade, rep. Experienced craftswomen prefer to work with one material. For example, crepe satin makes beautiful petals, but is difficult to care for. Beautiful decorations with large elements can be made from organza. It is worth noting that it is free-flowing when cut.
It is better for beginning craftswomen to make kanzashi from satin or silk ribbons. It is imperative to take into account the density of the material: thick products are more pliable and hold their shape well. If you have to work with soft fabrics, then the finished product should be treated with hairspray.
Most often, such decorations are made from satin ribbon. This material is pleasant to the touch, pliable, easy to cut, and the edges are easy to process. After manipulation of the petals, the product does not change its shape and is not deformed. For different colors, you may need ribbons of different widths - from 1 cm to 5 cm. It is recommended to start with 5 cm, as these are more convenient to work with. A wide selection of colors allows you to realize any fantasies from satin. Moreover, you can work not only with plain ribbons.
Silk Organza Satin Brocade Reps
On sale you can find special kits that contain the tools necessary for the job. They usually have patterns for making simple elements for beginners, as well as ideas for more complex colors for crafters. But, as a rule, experienced needlewomen use their own tools.
To start work you need to prepare a place. Making kanzashi involves many small details, so it must be carefully thought out. The surface of the table needs to be protected with a board, you can use a large tile, it is convenient to singe the edges of the tapes on it. For kanzashi you will need a certain set of tools:
- Scissors for cutting ribbons and threads. They should be sharp, with long blades.
- Tweezers for folding small elements of flowers, as well as for holding them when singeing.
- Metal ruler. You will need it to measure the tape. Many craftswomen do not need a ruler, as they use templates - squares of cardboard, the size needed for the petal. They are applied to the tape and cut out. If a lot of petals are required, then the last one is wound on a template, cut off and then pulled out.
- Glue. Transparent is desirable so as not to spoil the appearance of the finished product. Not only flower petals are glued, but also decorative elements: beads, rhinestones. A transparent “Moment” or a hot glue gun will do.
- Threads. Necessary for assembling the finished product, must be the same color as the ribbons. It is better to choose silk threads - such threads are stronger and thinner than usual.
- Needles, pins. You need several of the first, but they should all be thin and long.
- Candle. Needed for burning the edges of ribbons. Sometimes they use a lighter or a burner for this, but they leave only one hand free. Convenient to work with a soldering iron. Some needlewomen use it to cut the desired piece of tape and finish the edges.
- Beads, beads, sequins, rhinestones, balls, buttons, lace. All accessories are needed for decoration. This set depends on the imagination of the needlewoman.
- Simple hairpins, headbands, elastic bands, brooches. They will be needed as a basis for finished products. Pieces of cardboard covered with fabric can also be used.
Tips for performing the kanzashi technique
You can use fabric for training kanzashi petals. Silk bends and takes shape better than satin, but wallpaper makes stunning pieces.
For the first parts, it is better to choose dark fabrics, because light ones can darken when fired. If the technique consists of sharp petals, it is better to bend everything in one direction to preserve the effect of a living flower.
The best thickness of satin ribbon is thick. Kanzashi made from ribbon, the technique of which is very simple and interesting, is liked by both children and adults. Do not cut ribbons with a knife or dull scissors.
Note!
- DIY gifts for February 23rd - a large selection of ideas for creating unusual gifts for Defender of the Fatherland Day
What to give a 2-year-old boy - a list of the best options for an interesting and useful gift (120 photo ideas)
- Papier-mâché - TOP 120 photo reviews of original products. Detailed instructions for beginners on creating beautiful crafts
In this case, the edges will be uneven, which will make the craft not very neat. It is necessary to melt the edges only with fire, since heating on a stove or other method is dangerous.
How to assemble the product
From such blanks you can make flowers and a wide variety of compositions. The petals are connected in a circle using thread or glue. They are decorated with green leaves, which can be combined to form a twig. A bead or a beautiful button is glued into the middle of the flower.
The resulting bud is fixed to the base. This could be a circle of cardboard covered with fabric of the same shade, a simple hairpin or headband. By combining different tones, the shape of the petals is obtained from different flowers from ribbons: daisies, chrysanthemums, roses. They can be connected.
Making flowers from satin ribbons is not difficult, but there are several tricks that novice needlewomen do not know about:
- It is best to process the edges with a soldering iron or candle;
- you need to bring the petal to the fire not from above, but at the base, then there will be no black streaks;
- a hot glue gun is more suitable for gluing; it does not leave marks and does not damage the fabric;
- To prevent the workpieces from spreading when gluing, you must first secure them with thread or pin them together.
If the finished flower does not hold its shape, you need to spray hairspray on it, but it is important to remember that this may cause the beads to become cloudy.
Treat the edges with a soldering iron or a candle. Bring the petal to the fire not from above, but at the base
To prevent the workpieces from unraveling, first secure them with thread or pin them together
A hot glue gun is more suitable for gluing.
Flower with round petals in kanzashi style
First you need to cut out six identical 5 cm squares on both sides. After this, fold each square in half. Having expanded the square, you can see a triangle in the center, the corners of which are folded. You need to sew a triangle with thread, but in the future you don’t have to do this.
Then you need to turn the petal out so that the stitched ends are in the middle. We cut off the bottom of the petal horizontally and solder both ends together. The technology for one petal is ready.
In total you need 6 identical petals or more depending on the chosen flower. When all the petals are ready, you should glue them in the middle and add a bead or button. Thus, a flower of six petals is obtained.
How to make rose petals from ribbon
To model beautiful roses, specially shaped petals (derivatives of rhombus) are used. The square base is folded diagonally (photo 21).
Then two identical sharp corners are joined to a straight one, as indicated in the previous case (photo 22).
But the lower part of the diamond is simply cut off (by about a quarter) and the cut is singed.
Where and how to use kanzashi style flowers
Often women dream of making original flowers using the kanzashi technique for their hair. This is the ideal solution - make a hair clip and a small beautiful kanzashi flower to pin to your hair.
You can also make a flower on an elastic band. The hairstyle will have some zest and a completely unusual look. A hair flower can be made specifically to match the hair color or, on the contrary, the complete opposite.
Products with several different flowers of different types will look original.
The art of weaving kanzashi ribbons
A type of needlework that came to us from distant Japan is a technique of weaving beautiful products from ribbons. This exciting hobby has found a lot of fans all over the world. Mothers who make festive stage outfits for their children always decorate them.
Buying high-quality accessories is expensive, and it’s not always possible to choose the most suitable ones. Having mastered the technique of creating such crafts, you can involve all family members in this art, then you will spend long winter evenings doing exciting needlework, communicating with your household.
The kanzashi technique involves the use of ribbons and the creation of intricate curls, resulting in unique crafts and compositions.
The tsunami method is used in the work process. It is very similar to the origami craft technique: the skillful folding and rolling of ribbons and pieces of fabric to create flower petals or other products.
Base for kanzashi to hair
As a rule, women want to hide large hairpins and leave only a flower on their hair, so they attach them to hairpins. If there is only one flower, it can be glued into hairpins, for example, for bangs.
When the composition includes one or more flowers, it is better to attach the flowers to the comb. Since the comb is more stable, it will withstand many flowers on the hair and maintain a natural look.
Note!
Kinusaiga technique - TOP-140 photos of the best ways to create crafts using the Kinusaiga technique with your own hands + instructions for beginners
Do-it-yourself passe-partout - a master class with step-by-step do-it-yourself schemes. Making tips + photos of the best examples
- Decoupage with napkins: TOP-150 photos of ways to decorate with napkins. Simple instructions for beginners at home
Kanzashi flowers also look great on a hair hoop, especially if they are located along the entire hoop from small to large.
Exclusive options for kanzashi hairpins
To ensure that a woman’s hairstyle is impeccable and maintains volume for a long time, a kanzashi flower is attached to a hairpin. Hairpins are less noticeable on the hair and are better able to maintain the volume of the hair on the head.
In order to simply secure bangs or a few strands of hair, use hairpins. And on a hairpin, a bright butterfly with several beads, or a pointed dragonfly with an elongated shape looks perfect.
You can also attach beads or small sparkles to the product. You can attach several flowers of different shapes to the reverse side of the comb. On the hair, the comb will look from the front side, and the flowers from the back. You get a two-in-one effect.
Many female representatives prefer to create a decoration for themselves using the kanzashi technique for their necks, attaching small flowers to chains or beads and adding a couple of butterflies. This makes a beautiful DIY necklace.
You can also glue flowers onto the braid, so that the side that lies on the body is soft. For example, add a small piece of fabric from the back. If a woman likes pearl beads, then it is better to add a kanzashi flower in light shades, for example, soft pink or bluish.
Another piece of jewelry for women is earrings. The flowers are very small, and the earrings, on the contrary, are long. You can also add some flowers with round petals to the earrings.
Unusual ideas for inspiration
The basis of fancy flowers and butterflies is ribbons. The most classic is the sharp petal (single, double or triple). But there are round ones and options that imitate a rose. Single-layer petals are often used. All these basic elements can play out in completely different ways if you approach creativity with imagination or are inspired by original ideas.
"Little Marshmallow"
I was very attracted by the appearance of such a delicate flower, or airy sweetness. To work you will need:
- grosgrain ribbon 2.5 cm wide and 60 cm long;
- needle with thread;
- lighter;
- glue gun;
- pearl beads - 10 pcs.;
- central rhinestone;
- base for marshmallows.
Burn the cut with a lighter, fold a triangle, fix its right angle with fire. Make a mirror triangle from the tape - you will get a large and isosceles triangle, which needs to be folded in half (we get the first petal). We fix the acute angle adjacent to the side edge of the ribbon using a thread and thus make 10 more petals. The end is trimmed, singed and inserted into the first element. The thread is secured with knots and cut.
Then each petal is stitched according to the pattern “lower right corner - top 3 - lower left along with the lower right of the next element.” The bottom of the “marshmallow” is glued with a base. Beads with a diameter of 6 mm are sewn between the peaks pulled to the center in a circle, the thread passes along the peaks. The main decoration, about 1.5 cm in diameter, is glued into place.
Advice! To attach this beauty to an elastic band, you need to take a felt base, cut two strips of about 1 cm in it at an equal distance from the center, and lay an elastic band between them. Thread a narrow ribbon through the slits, gluing it on top and on both ends to the back side of the base.
@livemaster.ru
Dandelions from foamiran
This foam material is perfect for simulating a shaggy summer flower. For one elastic band you will need three strips of yellow foamiran, 30 cm long and 2.5 cm wide (1 mm thick). And a strip of 2.5*20 cm - green. The yellow ones are fastened, for example, with a hairpin, and thin strips are cut across one edge, not reaching the opposite 4–5 mm.
The same is done with the green one. We glue the yellow elements, covering the indentation with glue, as if rolling them into a roll. For convenience, we use tweezers, the tips of which will grab the edges. The foamiran will be wound around it. Then a green strip is glued along the side surface of the resulting roll, and the remainder is cut off.
Further processing can be done over a gas stove, not too close to the heat source. The material softens and takes the desired shape - the “dandelion” seems to open up, maintaining the position of the leaves as it cools. The back of the flower is decorated with twigs, which are given a more realistic shape from droplet blanks using heat from a lighter.
@m.nn.ru
Bows made of rep and eco-leather
Quite an impressive combination, but provided that the eco-leather is contrasting and with sparkles. A 4 cm wide tape is cut into pieces:
- 2 - 8 cm each;
- 2 - 16.5 cm each.
The longer strip is visually divided into 4 parts, the outer 2 are folded and secured with pins. The short one is wrapped around the finger and folded in half so that its ends are on one side of the fold. Then the strip is folded in half inward, forming a “house” with a triangular roof. Actions are duplicated with the remaining elements.
A bow is formed from eco-leather, with triangular grooves made in the sides. A small rectangular strip is cut out separately. The edges are processed by fire. The longer rep elements in the center are assembled on one thread one after another into an accordion with a “forward needle” seam. The thread is wrapped around the center, forming and securing a bow with 4 petals. “Houses” of shorter strips are similarly assembled onto a thread, which stitches the base of the element at a distance of a couple of mm from the edge. The thread is tightened to form a bow with 2 triangular petals sewn to each other.
Everything is assembled on the elastic in sequence: a large bow made of reps, a medium one made of eco-leather, a small one. The first one is glued and sewn to the elastic band, the rest are only fixed with glue to the previous element, wrapped at the end of the work with a strip of eco-leather.
@shafa.ua
Flowers using kanzashi technique for boxes
The box is made very easily and quickly. You can make a box from the simplest and closest materials. For example, you can use a small box, glue a couple of sides and press the lid to them. The box is ready and can be decorated with flowers in the kanzashi style.
The best option is to draw multi-colored patterns and glue a kanzashi flower to the lid. In the same way, glue several identical colors on the sides and add some beads or seed beads. The box will take on a completely different look and will only become more beautiful.
If you don’t have a box on hand, you can use any jar with a lid. In the same order, you need to decorate the jar with glass paints and carefully glue kanzashi flowers. It is advisable to glue a small flower to the lid, because the lid from under the jar will have to be unscrewed.
DIY satin ribbon hairpins
I am often asked: “How to make simple and beautiful hairpins from satin ribbons?” In today's master class I will show 2 options for how to quickly make hairpins with flowers from satin ribbons. We will use satin ribbons of different widths. In one case we will make flowers from a narrow ribbon 12 mm), in the second from a medium one (2.5 cm).
Hairpins made of satin ribbons
To create 1 hair clip we will need:
- satin ribbon, 12 mm wide,
- brocade lena, width 0.6 cm,
- burner/lighter,
- thread and needle, scissors,
- heat gun,
- Barrette,
- felt circle
From brocade and satin ribbons, based on 1 hairpin, we cut 14 pieces 7 cm long. We put the gold brocade on the satin ribbon and begin to form a petal.
We bend the segment approximately in the center.
We bend it again, so that the front side of the satin ribbon and the brocade are facing us.
We put the folded edge on top and get a flower petal. Next, we seal the edge over the fire so that the petal holds. We make 14 such petals for 1 hairpin.
We sew 7 petals together and tighten the thread.
We get a flower. Let's start making the second row of the flower.
From the inside out, between the petals we glue 1 petal.
View of the back side of the flower.
We get a flower with petals in 2 rows.
Stepping back a little from the center of the flower, glue a “click-clack” hairpin.
Next, we will select a felt circle that will cover the center of the flower and hold our hairpin. Glue the base.
We make the same second hairpin.
Kanzasha flowers for wedding decor
Brides want to fill their bouquet with something unusual and lovely. As a rule, flowers for a wedding bouquet are chosen white or pink.
But often the choice falls on bright flowers in the kanzashi style. Among the kanzashi flowers, you can attach ribbons or large beads on a thin silver wire.
Flowers using the kanzashi technique are attached to the base in the middle and glued completely, without missing a space. The perfect wedding bouquet is original and very unusual.
Manufacturing stages
Jewelry making techniques vary greatly: some can be completed in an evening, while others require much more time. The general scheme for creating kanzashi bows from ribbon is a simple algorithm:
- Cut the ribbons into squares, preferably using a soldering iron. If you use scissors, the ends of the fabric need to be singed.
- Using a needle, gather the squares onto a strong thread.
- Glue the element to the base: usually this is a circle made of felt or cardboard. For a more aesthetic look, cover it with satin in the color of the flower itself.
- Sew a button or similar decorative element into the center.
- Attach the finished kanzashi to the base accessory with glue: it can be a clip, a headband or an elastic band.
- Wait for the glue to dry completely, straighten the petals if necessary.
The given algorithm refers to general recommendations. To create beautiful kanzashi, a master class is the best solution. If you find the right instructions, even a beginner can make his first bow and plunge into a special atmosphere of creativity.
Elegant lush bow for September 1
Bows for school are a traditional decoration for Knowledge Day, and an elegant version in the Japanese style will allow you to stand out from the general background of classic bows. For production you will need the following:
- white satin ribbon 5 cm wide;
- soldering iron or lighter;
- ruler and scissors;
- glue;
- strong thread and needle;
- large bead;
- tweezers.
The first step is to prepare pieces of fabric measuring 12 x 5 cm - the more there are, the more magnificent the bow will be. The optimal quantity is 17 pieces. Further steps are related to the creation of petals, therefore they are the same for each patch.
Beautiful bows are created like this:
- Having unfolded a piece of fabric with the right side facing away from you, bend the upper right corner inward and carefully secure it with a needle.
- Turn the flap and bend the lower left corner, hide the tip inside. Perform similar actions in a symmetrical manner.
- Fold the flaps with the curved corners inward, stitch along the bottom edge, and tighten the thread at the base of the petal. Expand and open the title to create a three-dimensional element.
- After all the blanks look like this, start assembling a single composition.
- String 8, 6 and 3 elements onto three separate threads, respectively, for 3 levels. Turn the largest circle face down and attach a circle-shaped base to the back.
- Turning it over again, create a full-fledged flower, securing tier after tier. After this, decorate the core with a bead and let the glue dry. School bows are ready.
Cut the satin ribbon into small strips
Bend the corners Fold the corners inward, stitch along the bottom edge and tighten the thread Assemble all the parts into a single composition, glue the base Fasten the elastic band, decorate with beads
Strict for school
Bows for school can be openwork and elegant, as in the previous version, or strict. Neat, beautiful accessories are suitable for school everyday life; also, by varying the colors, it’s easy to choose and make jewelry for a specific shape. For this master class you will need:
- white grosgrain ribbon 4 x 10.5 cm - 6 pieces;
- light lace 4 x 10.5 cm - 6 pieces;
- blue grosgrain ribbon 2.5 x 10 cm - 12 pieces;
- white decorative tape 2.5 x 10 cm - 6 cuts;
- felt circle, white or blue, 4 cm in diameter;
- rectangle of white or blue felt 1 x 4 cm;
- white satin ribbon 5 x 5 cm - 1 piece;
- satin ribbon of the same color 2.5 x 3 cm - 20 pieces;
- rubber.
Traditional tools for creating kanzashi bows should also be available: from scissors to tweezers. For this tutorial, it is recommended to use a soldering iron.
The first stage is creating a bow, for which pieces of lace should be attached to a grosgrain ribbon, soldering the ends. Fold the resulting 6 elements in half and gather them onto one strong white thread. Also bend 6 pieces of grosgrain blue ribbon in half and string it onto a thread to create a second tier for the bow. The decorative layer consists of the remaining pieces and lace, with which a similar procedure is carried out.
After preparing all the parts, you need to start assembling the flower. Apply hot glue to the completely white piece and attach the blue part to it. In this case, petals of different colors should not overlap. The third tier should be glued in a checkerboard pattern, creating a multi-layered proportional flower.
The basis for the kanzashi will be an elastic band to which the circle will be glued. Then you need to connect the bow with the circle. To create a rose, you will need one piece of white satin ribbon, which should be folded almost in half, but with a slight violation of symmetry. After this, the flap needs to be twisted into a tube, coating the gaps as necessary. Trim the excess fabric from below and set it on fire - the middle of the bud is ready.
20 pieces of satin ribbon are future rose petals, so you need to round them at one end and just create a straight line at the other. You need to use a lighter for these purposes; a candle can easily ruin the fabric. Assembling a flower consists of gradually gluing the petals to the tube, starting from the bottom and following a spiral. The formed rose needs to be attached to the middle - the kanzashi bows for school are ready.
Cut the ribbons and lace, fold them in half and gather them onto a thread
We place the resulting blanks on top of each other and attach an elastic band to the back side.
We cut the satin ribbon into small squares, from which we collect a rose flower. Glue the flower in the middle, and the school bow is ready.
Unusual round
Kanzashi petals come in two types: round and pointed; the former are used more often in various techniques. To create them, beginners will need:
- scraps of satin fabric 5 x 5 cm;
- lighter;
- scissors;
- tweezers.
Sequencing:
- fold the squares of fabric diagonally so that the corners coincide with each other;
- fold two corners from one side to the third;
- unscrew the corners located on the left and right in the opposite direction, fix with tweezers;
- trim the bottom edge. The more tissue is removed, the thinner the petal will be;
- treat the tip with fire and fix it with tweezers - the petal is ready.
- then assemble the finished elements according to the general scheme.
We cut out small square flaps from satin fabric, fold them into a triangle and fold two corners to the third. Turn the corners in the opposite direction, fix them with tweezers. Trim the lower edge, put together a composition from the resulting petals, fasten with a hairpin - the round kanzashi is ready.
Miniature made from thin ribbons
You can create simple but elegant flowers from round petals; for this you need to use a narrow ribbon 0.5 cm wide. From fabric of two matching colors - red and black, for example - you need to cut 3 types of strips:
- 8 cm long - 8 pieces;
- 7 cm long - 8 pieces;
- 6 cm long - 8 pieces.
Next, you need to put the black tape on top of the red one, fold the ends and solder them. For convenience, you can use tweezers or a soldering iron. It is necessary to carry out this procedure with all the tapes, without mixing them as you go. Glue the largest petals onto the cardboard circle, and the middle ones in the spaces between them. The third row should create volume and fill the remaining voids. By gluing a bead to the center of the flower, you can make beautiful kanzashi.
We prepare multi-colored narrow ribbons, beads and a base for fastening. We cut the ribbons of different lengths. We put the ribbons on top of each other and solder the ends. We collect the petals by size and glue them to the base in layers, starting with the largest. We glue the bead in the center, and a beautiful bow of thin ribbons is ready.
Simple for beginners
To create a charming rose using the Japanese technique you will need:
- satin ribbon 5 cm wide in green or another color for future petals;
- glue;
- scissors;
- lighter.
The non-green ribbon is cut into 12 cm long flaps; 25 pieces will be required. To prepare the petals, you need to turn the flap over and lower the upper right corner to the bottom, forming a triangle. Using a needle and thread, sweep along the bottom edge from the corner to the middle of the strip, and do the same on the left side. Pull the thread, creating a petal, and secure it.
Once all the petals are ready, you can start assembling. From the first element you need to form a center, wrapping it into a ball with glue. Then stick other petals in a circle, creating a bud. It is important to apply glue to the bottom edge. Prepare round petals from green shreds 10 cm long and attach at the base of the rose.
Prepare tools and materials: cut two colored ribbons into squares Fold the green square into a triangle, melt the edges and get a narrow leaf From yellow squares we fold round petals for a flower From the resulting petals and leaves we assemble a flower and a twig We connect the parts, insert a bead - kanzashi - into the center of the flower ready
Various crafts made from kanzashi flowers
There are a lot of ideas for decorating with kanzashi flowers. Crafts using the kanzashi technique will go with almost anything. It is possible to attach original flowers to any craft or painting.
You can make entire paintings on canvas using the kanzashi technique. Various decorative swans or cockerels, as well as all animals, can be collected and made in the kanzashi style.
For the upcoming holiday, if you wish, you can make a beautiful card for your loved ones with flowers from kanzashi and beads. And for the New Year, a cute Christmas tree made from green kanzashi.
In the same way you can make eggs using the kanzashi technique. In order to transform the room, you can add a decorative bird for kanzashi curtains. You can create as many decorative products from kanzashi and imagination as you like.
Photos of the kanzashi technique can be viewed on any handicraft website. On the Internet you can see in detail how various products are made. Don't just start with a difficult task. It is important to understand the features of the technology and the stages of work. All this will ultimately bring great satisfaction.
Master classes
You can see many master classes with step-by-step photos on making jewelry in our “Kanzashi” section , mostly 2.5 cm ribbons are used, sometimes 5 cm wide. Here are some ideas (photos are clickable):
Bows, elastic bands and hairpins
Simple flowers
Snow-white bows for school
Ribbon hairpins
Pink and lilac hair clip
Snowflake clips
New Year's bows
New MK - marshmallows
Headbands and tiaras
Diadem - master class
Ribbon headband
Ribbon crown
Crown and magic wand
hat
Flowers
Apple blossom (wreath)
Headband with snowdrops:
Wildflowers
Ribbon rose
Dahlia
Panel "Roses". Master Class
Basket with roses made of satin ribbons
fantasy flower
Autumn necklace
Panel with flowers
Cornflowers
New Year's MKs
Snowflakes
Snowflake
Herringbone
Christmas balls
,
Christmas decorations
Holiday MK
Order for February 23
Gift for March 8
Easter Egg
Egg stand
With snowdrops:
St. George Ribbon
Ribbon brooch for May 9
Decoration for glasses and bottles
Even more master classes can be found in the “Kanzashi” section.
In order not to forget the address of the page and share with friends, add it to your social networks: Do you want to know news about competitions or master classes?
Tags: Handicraft techniques, DIY flowers
Attention! It is better to write urgent questions in the comments on the website (form at the bottom of the page) or, better yet, directly by email. There are no notifications about comments from the VKontakte form! This form is more for feedback. 
Discussion: 3 comments
- Sonya:
January 18, 2022 at 2:49 amVery clear lessons, thank you! I have already mastered almost all the elements. It's so cool! I have long wanted to make such beauty with my own hands.
Answer
- Eugeniya:
September 18, 2022 at 9:28 am
What beautiful crafts you make! I immediately wanted to master kanzashi, so I’ll go buy colored ribbons.
Answer
- LuzaraFar:
September 3, 2022 at 19:00
Everything is well written, detailed and understandable for beginners in this business. I'm just looking at kanzashi, but I think everything will work out according to your instructions. Thanks to the author!
Answer
