How to make lamps and chandeliers from pipes with your own hands?

Making a lamp from PVC pipes or metal elements is much easier than it seems at first glance. You can assemble a modern, stylish model in a couple of hours. For this, scrap materials are used: everything you need can be bought in almost any store. The components are inexpensive and a homemade lamp will cost several times or even tens of times less than the finished version.

The simplest option from plastic pipes for a summer residence.

Lamp made of pipes - features of working with the material and assembling the structure

Lighting devices made independently from plumbing fittings have undeniable advantages over factory-made ones.

Among them:

1. Unique design. Craftsmen can be sure that their work will exist in a single copy. Such an item takes into account the interior features of the room and will fit well into it.
2. Availability of components. The lamps are made from materials left over from repairs.
3. Low cost. Chucks, adapters, and switches can be purchased at a building materials store. Components from unnecessary lamps are also used, so manufacturing costs are minimal.

When choosing materials, keep in mind that:

1. Plastic segments should be made of a material that bends easily when heated. Polypropylene or polyvinyl chloride is suitable.
2. Plastic is sensitive to heat, so it is better to use LED or LED lamps in combination with it. Standard incandescent lamps are allowed in metal products.
3. Although designs in the steampunk or loft style look aged and even rusty, you need to remember that these are only design elements. Materials must be free of rust and dried before work, and the antique effect is created on the finished lamp using a chemical patina.
4. If structural elements are attached to each other using threads, then their main condition should be the equal diameter of the pipes.
5. Adapters will be needed to secure the cartridge and other structural parts.
6. Assembly must be carried out according to the diagram and in accordance with electrical and fire safety requirements.

Plastic pipes. Ideas for children

If you have a small child in your home, then do not rush to buy the necessary items for crazy money. Kids are growing up quickly and soon all this will no longer be relevant. Try to show your imagination and make useful things for the children with your own hands.

Manege

In order to limit a small child’s movements around the apartment, a wonderful device has been invented - a playpen. You can buy it, or you can make it according to your individual measurements! You will need a lot of material to make the playpen, so you won’t be able to get by with scraps in the design.

It is best to purchase pipes in the store, having previously calculated how many of them are needed to create the playpen. Do not regret the money spent; after the child grows up, the playpen can always be disassembled and made into something else.

When creating a playpen, take into account the distance between the bars and the size of your baby; it will be a shame if the child crawls between the bars. Experienced parents advise to come up with fastening the structure to a reliable support to prevent the playpen from tipping over.

Swing

To make swings, it is recommended to use reinforced plastic, because... the situation here is related to the movement and safety of the child. Start making them only when you get good at working with simple crafts.

There are many swings. The most interesting and attractive ones in the form of swinging sofas can be found in country furniture supermarkets. They're just expensive. See how they are made, take the necessary dimensions, develop a sketch adapted to your leftovers.

Football goal

Do you live in the private sector or have a dacha? Consider making children's soccer goals from plastic pipes. In fact, the product will consist of several components that will need to be assembled into a frame. To be more convincing, you can purchase a net and stretch it over the manufactured gate. When the little football player grows up, you will disassemble the structure and immerse yourself in creating a new masterpiece.

small waterfall

An interesting tip for a summer residence is a small waterfall. On hot days it will be a great salvation for children. The waterfall is a U-shaped structure. Drill holes in a row in the horizontal rack, and provide places at the base for attaching water hoses. By supplying water you will get a water arch, you won’t be able to kick your baby out of such a shower!

Plastic pipes are an excellent material for realizing your bold ideas. Create, dream, create, delight your loved ones and friends with useful homemade products.

https://youtube.com/watch?v=sds70qlLDm8

Making a wall lamp from flexible metal-plastic

From polypropylene fittings you can make an original sconce on the wall, with its help you can highlight interior items or zone a room. For this purpose, water pipes of small diameter or ventilation scraps with a diameter of 25 cm or more are used.

In the first case, the pipe can be bent under high temperature using a hair dryer. The pipe heats up to 140°C and becomes flexible. At this moment it can be given any angle. After cooling, the shape is retained. After this, an electric wire is pulled through it, plastic couplings are attached under the dies for fastening to the wall and under the cartridge. The blank can be painted in any color in accordance with the design of the room. This wall lamp would be appropriate in a country house, garage or workshop.

You can make an elegant night light from a ventilation pipe. To do this, a pattern is applied to its walls according to a template, which is then cut out using a drill with drills of different sizes. Using abrasive tips, you can remove the outer layer according to the drawing and get the effect of translucent illumination in places where the walls become thinner.

The edges of the sections are treated with a thin layer of silicone, and the desired tone is applied to the workpiece. After this, wires, a socket and an LED lamp are installed inside the pipe.

Final part

To fix the pipe, a hole is drilled in the lower compartment for the fixing screw. A pipe with a diameter of ¾ is soldered, which will allow you to maintain alignment and also get an original look. As a stopper, you can use a ¼ bolt, which is attached to the outer handle of the faucet. The lampshade can be made using one of the methods described above, attaching it with screws and painting it with copper or gold paint.

The rubber bushing is mounted in the opposite end of the fitting, after which the end of the wire is cut off and pulled inside the pipe to the cartridge. The lamp is screwed into the socket, around which the casing is clamped. A similar lamp made from water pipes will make it possible to provide the required amount of light under different conditions. At the same time, its cost is minimal.

If you are thinking about radically changing the look of your room or want to complement your home interior with a loft chandelier, then try making a loft-style chandelier from pipes with your own hands! Master classes with photos will help you with this.

By the way, the loft settled into interiors relatively recently - about 60 years ago, and to this day it is interesting for its variety of design concepts. It is appropriate both in large studios, where the living room is combined with a dining room, and in small rooms. DIY loft-style lamps are a compromise between fashion and style, extravagance and everyday life.

Familiar objects appear before us in a new light - this is a DIY loft lamp. Features include long chains for hanging from the ceiling, custom lampshades or compositions of many simple lamps and uses.

Making a loft-style lamp from pipes is quite simple, read master class 4 - see for yourself!

Materials and tools

• 5 large pear-shaped light bulbs;
• 10 brass (copper) tubes – 5 short and 5 long;
• fitting according to the diameter of the tubes;
• 1 longest brass tube – suspension axis (to the ceiling);
• 5 adjustable brass hinges;
• 5 ceramic light bulb sockets;
• two-core connecting wire (so that it passes freely into the copper tubes);
• electrical cable;
• insulating tape;
• screwdriver.

Chandelier manufacturing technology

Step 1

1. Let's do the wiring. To do this, unscrew the cartridge covers and connect the wires to each of them, as shown in the photo.
2. We pass the wires through the tubes
   , then use hinges to connect the short tubes to the long ones.
3. We cut off the wire, leaving a few centimeters for twisting
   with the main cable, which will be connected to the electrical network on the ceiling.
4. Screw the edge of the tube into the cartridge.

Step 2.

• We screw the “legs”
  of the future chandelier into the fitting and make the wiring again: we twist the white wires with the white core, and the black wires with the black wire, as shown in the photo. We wrap live parts with electrical tape.
• Carefully tuck the cable inside the main brass tube
  that will hold the chandelier. We fix it on the ceiling. After everything, we screw in the light bulbs.

The result is an urban chandelier that combines the simplicity and elegance of an industrial or elevator style with the light of large lamps.

How to make a table lamp from couplings?

The table lamp algorithm is universal for most of this type of design.

To make a 2-arm lamp you will need:

• 2 cutting cable 70 cm long;
• fumlenta;
• adapter-tee with thread – 1 pc.;
• double curved fitting – 2 pcs.;
• direct coupling – 2 pcs.;
• adapter with thread for cartridges – 2 pcs.;
• base die;
• metal paint;
• electric base – 2 pcs.;
• incandescent elements – 2 pcs.;
• acetone;
• electrical plug and switch.

All parts are pre-degreased and wiped. The cable is pulled through fittings and adapters, after which they are connected into a single structure and coated with paint. When the workpiece is dry, electrical accessories are attached to it according to the diagram. Parts that cannot be fixed with threads are installed with “liquid nails” glue or sealant.

For such a lamp, it is appropriate to use light bulbs with twisted bulbs, which create a “candle in the wind” effect.

Making a lamp from water pipes with your own hands

By adding pieces of plumbing fittings of equal diameter to the design, you can adjust the height and width of the lamp. The pipes are attached to couplings, and fittings for lighting elements are installed at their ends. The fastening can be installed either sequentially or using a tee.

The process is reminiscent of assembling a children's construction set and allows you to make different types of lanterns:

• wall sconce;
• floor lamp;
• table lamp;
• chandelier;
• Street light.

Advantages and disadvantages

Now let's look at the positive aspects and disadvantages of assembling a lamp at home.

Minuses

• painting work - since the smell of aerosol paint will remain in the room for a long time, it is not worth doing this inside the living room, but dust may stick to the open area. Here you will have to find a compromise;
• time - you will have to spend more time on manufacturing than on choosing and purchasing a ready-made lamp, sconce or chandelier;
• Electrical knowledge is not a minus, but a necessity. Depending on the complexity of the design and the desired result, the electrical circuit connection diagrams may differ, and therefore, if you do not have experience, it is better to purchase a finished product.

The process of making a lamp from pipes in steampunk style

The word steampunk comes from the English steam, which means “steam”.

The concept of “steampunk” is broader than a design direction: it is an entire philosophy in art and a subculture with its own trends in clothing, painting and cinema. Moreover, all items of this genre exist in 1 copy, because they are made by enthusiasts, and not by workers at industrial enterprises.

The basis of the design are the details of the mechanisms:

• hinges;
• levers;
• valves;
• gears;
• chains;
• aged wood;
• pieces of old pipes;
• parts of clock mechanisms;
• Edison lamps;
• pressure gauges from steam engines.

They allow you to experiment endlessly with lamp designs. This could be a pendant chandelier made from scraps of water pipes, a futuristic table lamp in the form of a flask screwed into a water tap, or a floor lamp made of brass wire.

The manufacturing process takes from 30 minutes to several weeks, if the desired color must be achieved through the process of natural oxidation of the metal.

What should you pay attention to first?

The use of other types of glass containers is not recommended. The bulbs are originally manufactured to withstand high temperatures.

Therefore, if you set fire to other glass or a container made of non-fireproof material, serious injury may occur.

Cleaning should be your main focus. It is better to do this procedure several times and be patient. The fact is that if any chemical components remain inside the flask, the toxins will subsequently enter directly into the lungs. This is unlikely to make the vaping procedure safe, and most likely even more risky than smoking a regular cigarette.

You should not use a homemade vaporizer all the time. But sooner or later the products will fail. Still, even light bulbs are not the best analogues of natural bulbs used in professional devices.

An alternative option is to buy an electronic cigarette. Modern mechanical and box mods meet advanced standards and help make the vaping process no less comfortable and effective. In addition, it is much more convenient to maintain devices due to the use of specialized liquids rather than just any herbs.

Making a floor lamp from water pipes

When working on a floor structure made of metal reinforcement, you need to remember that stability is important for a floor lamp. The stand must be heavy and reliable. This can be a wooden beam or a metal disk (in this case, welding is necessary).

A floor lamp made of plastic can be supported by 4 spacers made of couplings.

Required tools and materials

Before making a chair from plastic, you need to purchase the necessary equipment and property for this.

To work you will need the following tools:

1. tape measure or pipe cutters;
2. hacksaw for metal;
3. oil level;
4. screwdriver;
5. special soldering iron;
6. drill or screwdriver;
7. stapler;
8. marker.

The materials needed are:

• PVC pipes;
• wood screws;
• fittings (corners, tees, plugs, contours, crosses);
• plywood 8-10 mm;
• foam rubber 50 mm;
• upholstery fabric;
• thick tarpaulin.

How to make a hanging chandelier from pipes?

A hanging chandelier with a base made of a water pipe is a creative solution for a large kitchen in a private home or for a cafe. In this case, long fittings of large diameter are suitable, to which lamps are suspended on wires disguised with decorative rope. Jars or bottles coated with varnish for glass and ceramics can be used as lampshades.

If the glass is painted in different colors, the chandelier will create unusual lighting in the room.

How does a vaporizer work?

• heated air moves into a container with herbs;
• the interaction of air and herbal mixture leads to the evaporation of all kinds of active ingredients;
• The built-in thermostat controls the heating temperature, as it differs for different mixtures.

The cost of vaporizers on the market is high; true smoke connoisseurs do not skimp on this device after trying it in action at least once, but it is possible to make a homemade vaporizer from items that are always at hand.

Making an oil lamp from pipes

Using a tee, a cotton cord and kerosene, you can quickly create an oil lamp that will help out on a hike and in the country. To do this, 3 pieces of thin rope made of natural fibers are pulled through the fitting, after which one side of the tee is closed with a plug, and an elbow is installed on the other, which will connect it to the stand.

The wick is held in place by 3 small hose adapters. Any oil or kerosene is poured inside it, and the wick soaked in it is set on fire.

Procedure for making an LED lamp from pipes

The combination of LEDs and white plastic is suitable for a high-tech interior. This design is suitable for lighting an office, a store or a living room decorated in this manner. Hanging, wall or floor mounting options are available.

The basic model is a PVC pipe with a diameter of 60 mm, inside which LED modules are attached to thermal tape. You can also cut part of the pipe at an angle, install LEDs and cover them with plexiglass, securing everything with sealant.

DIY loft chandelier made from pipes

The name “loft” comes from the English word “loft” and means “attic”. When decorating the interior, in addition to minimalist design, rough brick walls and massive furniture, open building elements are used that are not hidden in the walls (pieces of pipes, piles, massive beams, open ventilation, valves).

A loft-style chandelier can be made with your own hands without forging or welding. In this case, all decorative elements are attached with glue. The loft style allows the use of a wooden base. The effect of aged wood can be achieved using tea leaves in which the workpiece is soaked. Then it is covered with a layer of tinted varnish.

The nuances of choosing lamps for different rooms

Living room and hallway

In a loft space, the main design emphasis should be on the hallway and living room area. This is the first place that the person entering sees, and the design concept should immediately become clear to him.

There is no need to separate the hallway and living room with partitions. Separate zones are created with the help of lamps. There is no need for too bright light for a hallway, so a lantern with a couple of light bulbs is enough. It will look stylized as a street lamp.

For the living room, all the key lighting requirements for a loft room are provided. There should be a main chandelier attached to the ceiling with a height-adjustable pendant. It is complemented by lamps on the walls, tables, and floors.

Bedroom

Strict adherence to smooth, clear forms, characteristic of loft design, can be slightly sacrificed in the bedroom or nursery. Here it would be appropriate to add parts made of fabric and textiles. Floor lamps and wall sconces are made strict, but minimalistic, without frills. A good solution is to combine loft and retro styles.

Lamps in the loft bedroom.

Kitchen

Unlike the bedroom, in the kitchen it is worth abandoning fabric inserts in the design of lamps. Plastic is also not recommended. A metal or wooden base is suitable. The area around the dining table should be well lit by the main chandelier. For other areas, wall sconces are used, as well as built-in lanterns built into furniture.

Making a brass loft chandelier

The loft style is characterized by a combination of similar lamps in one area. But you can make your own chandelier, which will have shades of different shapes.

In this case, lamps of different lengths are hung on a massive beam made of wood or metal, which are decorated with brass caps of different shapes: cylindrical, semicircular or triangular. Design elements can include water taps, kitchen utensils and other scrap that remains after repairs.

The unifying link will be the material of the lampshades and decorations – brass.

How to make an industrial style lamp?

An industrial style lamp implies the presence of household and industrial items in the design. The main requirement for compliance with the style is minimalism and ergonomics.

The lamp can be decorated in silver or dark colors. Small red details are allowed as a stylish accent.

What are the disadvantages of a homemade vaporizer?

Vaporizers are now in trend, as information that combustion burns a large amount of active substances has become available to the general public. Smoking is soft, rich and tasty, desired not only by gourmets, but also by those who want to get more effect from the existing product. Does a lamp vaporizer cope with this task? Yes, connoisseurs of psychoactive pleasures find this method interesting. The desired effect is achieved quickly, but using a homemade device is complicated by the need for external heating and the lack of a filter screen. And these are not the only disadvantages.

A simple homemade vaporizer - cons:

1. the design is fragile, inconvenient for use on the go;
2. there is no temperature control - it is impossible to evaporate the stuff, ensuring uniform heating of the container;
3. you can’t vape without attracting attention (even the most inexpensive vaporizer models look compact, laconic, and similar in design to electronic cigarettes);
4. frequent problems with the tightness of the device;
5. use of non-ecological materials of dubious quality: plastic, tape, etc.;
6. the steam does not have time to cool to a safe temperature and may be too hot;
7. When overheated, smoke with carcinogens may form.

Homemade vaporizer from a light bulb

A portable vaporizer is an investment in your health. Yes, it is expensive, but the price is justified by the expanded functionality, the presence of additional options such as control via a smartphone, use as a power bank, etc. You can adjust the evaporation temperature, organize inhalations with medicinal herbs, green tea (the vapor from Japanese sencha tea is more invigorating than espresso).

Choose top models of vaporizers in the DuDa online store - we have a large selection of portable and stationary vaporizers. Remember that the fewer toxins in your body, the more energy!

Making a floor lamp from pipes

A floor lamp made of pipes coated with black varnish will fit well into the interior of a bedroom made in light colors. The height and direction of the stand can be adjusted using fittings, which make it possible to give the lamp any shape. Moreover, this model provides for the presence of a lampshade.

It can be made from any available materials that fit into the style of the room:

• thick metal wire;
• kitchen bowl or small saucepan;
• colored glass bottles.

Lamp design at home

The basic principles of making a lamp with your own hands are as follows:

1. The effect of negligence. The more open, massive parts, the better.
2. The undesirability of eclecticism. It is inappropriate to combine crystal lampshades with plastic pipes.
3. Limited color range. Futuristic style does not involve bright colors. All decorative elements must be white, gray, black or bronze. The use of copper and brass is allowed.
4. Material limitation. Fabric, rubber, natural materials will not fit into the style.
5. Dim lighting. You should not use powerful incandescent lamps, because retro style implies dim light. You can use a dimmer to control lighting.

What difficulties may arise during the manufacturing process?

To avoid any difficulties during the work process, and to ensure that the lamp pleases you with its appearance, you need to take care of the following things in advance:

1. The same thickness of the components of the base and its correspondence to the diameter of the thread on the adapters.
2. Reliable fastenings. Buy mounting surfaces for wall lamps and pendants for chandeliers in advance.
3. Installation of the lampshade. Often it is not possible to attach the desired lampshade due to different diameters of the outlet holes. It's a good idea to consider a design with an exposed incandescent lamp. You can use colored glass bulbs, the light of which compensates for the lack of a cap.
4. Fastening the base. It is not always possible to find fittings with threads corresponding to the diameter of the cartridge. In some cases it will have to be mounted on glue.

It is important to remember that any metal structure through which electric current passes must be grounded, and all wire connections must be reliably insulated.

What will you need?

To manufacture the device you will need the following elements:

• The bulb is from a light bulb, the tube is from a ballpoint pen. These components make up the body of the device and are selected from new products. It is largely irrelevant to use used light bulbs due to various impurities and corrosive formations.
• Scissors. This is the basic and most important tool that a vaper will need.
• Plastic bottle, electrical tape. Don't forget about salt, which is useful for preparing the vaporizer. A plastic bottle is selected in a volume of 0.5 liters, and electrical tape can be bought at any office supply store.