Lifehacks for the home: take it and do it

Varnish assistant

Using nail polish you can not only protect your favorite tights from arrows. There are other useful life hacks. Threads are dipped in varnish to quickly thread them into the eye of a needle. The varnish is used to seal mailing envelopes and screws in loose glasses, as well as buttons that are about to come off, but there is no way to sew them on.

If the glass is cracked, you can coat it with colorless varnish on both sides before the technician arrives. If you cover the bottom of metal bottles or tubes with clear varnish, they will not leave rust marks on the bathroom shelf.

Lifehacks for the bedroom

To create ideal order in the bedroom, the following tips are suitable:

An organizer with pockets made from thick material can complement a bedside table or even replace it. It is advisable to attach the product to the side of the bed.

Useful life hacks for the home: an organizer for various little things on the bed

To save space, you should move the bed close to the wall.
A wall mirror can be attached to the front door.
To improve sleep, it is advisable to remove unnecessary boxes from view and place them on top of the closet.
Instead of a bedside table, it is recommended to choose a spacious chest of drawers with a narrow and high configuration. This piece of furniture takes up a small space on the floor and offers a lot of space for things.

Useful life hacks for the home: a mirror can be placed on the closet door

Hinged wardrobes can be replaced with a regular hanger, which is hidden from view by a stylish curtain.

For residents of country houses

Living outside the city, people often eat outdoors. Place the dining table under a fruit tree, bask in the sun and dine in good company - what could be better?

Only annoying ants can interfere, which will definitely climb onto the table, closer to the delicacies. To prevent this from happening, place the table legs in basins of water (photo).

Folding workbench options

In the media of mass information, self-made home masters publish a large number of different self-made drilling tools. Optimal options for folding installation according to the foldability of preparation and consumption:

Springy.
Based on a steering rack.
With belt drive.
Mini versat.

Springy

The spring plays the main role of the rotation mechanism for moving the drill. The following tools and materials are required to produce a spring assembly and any workbench.

Tools

electric brewing unit, which operates as a daily power cut;
electric drill;
bream;
pipe bender;
installation tools – pliers, wrenches, screwdrivers, hammer, etc.;
cutting machine;
sander.

Materials

steel water pipes;
metal sheet 8 - 10 mm thick;
steel smuha zavtovshki 2 - 3 mm;
hardware (bolts, nuts, washers);
welding electrodes;
spring;
pen.

The preparation of parts and the folding workbench is carried out in several stages:

The frame is cut from a metal sheet. The larger the surface area, the more stable the control will be. Best of all, it will be a square of 50 x 50 cm. The metal sheet can be fastened to the table or workbench with bolts through the holes.

A section of pipe approximately 400-500 mm long is welded into the frame. This is how the bench stand is formed.

The pipe section bends in the shape of the letter “C”. Weld couplings to the ends of the frame, the diameter of which would fit the tripod (stand).

Place a spring on the stand. Then the frame clutch is lowered onto the tripod. A washer is welded to the lower coupling to rest against the spring.

With black metal, 40 mm wide, it is important to chop. It is important to open the installation doors.

An eyelet is welded to the upper part of the stand to hinge the end of the support.

At the bottom of the frame, drill a hole for hinged fastening in the middle of the frame. A later groove is cut at an important plane to move the hinge. Secure the middle part of the vazhel.

A hole with a passage diameter of 42 mm is welded to the protruding side of the support frame. All standard electric drills have the same diameter of the body neck.

At the end of the day, it is important to dress or weld the handle, hand-holding the hand.

Insert the electric drill into the hole and tighten the bolt connection. The workbench is ready for work.

It is necessary to understand that such a folding bench scheme is not a dogma. This is an insurance option for the work of a compressed spring. There are structures like the reciprocating arms of an extended spring. You can also use the wine table.

Based on steering rack

This is a simple version of the design of the bench based on the steering rack. The steering bar can be found at a car dismantling shop. The rack is a metal strip with a toothed surface, placed in the body. To prepare a bench, you will need a set of tools - the same as in the spring version.

Materials

steel roll - 50 x 50 mm;
metal sheet 8 - 10 mm thick;
welding electrodes;
steel smuga 40 x 2 mm;
car steering rack;
steering wheel axis shank;
flywheel;
metalvirobi.

Staged collection

Cuts of bundles are boiled at once, forming a box-shaped frame.

The stand is welded to the metal sheet frame.

Attach parallel to the steering rack to the rack, a vikorist section of blackened steel.

Insert a section of the kerma shank axis with gear into the side hole of the rack body.

The flywheel is welded to the free end of the shank.

The flywheel can be repaired as if it were an old one. At the end of the drop, the flywheel can be prepared with your own hands. For this, two sections of smooth reinforcement are welded in the shape of a cross. Handles are installed at the ends of the flywheel.

Brackets made of steel are welded to the steering rack body. The lower bracket is equipped with a ring rim with lugs.

As an excuse, stretch the neck of the electric drill.

Attach a clamp to the top bracket to strengthen the drill body.

Install the drill.

The maximum height of the tip of the drill above the bed is set in the range of 120 – 150 mm.

In order to manually control the switching on and switching of the instrument, the life switch should be opened with a single-contact switch.

Video of assembling a workbench based on a kerma lath:

Belt driven

Such a design is used if the cartridge drive operates behind the pass transmission mechanism of the wrap around the adjacent electric motor. The motor is placed on the same frame with a clamping drill chuck. Behind the help of the belt, the wraparound rotor is conveyed to the motor through the pulleys to the cartridge.

The device of the frame movement unit can be applied to the above-described options by the design of the worktops or, depending on the resourcefulness of the home master.

Mini verstat

For robots with different parts and different circuit boards, you need to manually craft them with a small drilling machine. For this purpose it is necessary to add a chuck for fastening drill bits ø 0.5 – 6 mm. A 12-volt motor is selected in the engine compartment.

The fastened engine with a cartridge installed before the rotary assembly of the machine can take many different shapes. The main thing is that the workman’s hands are practically not occupied with drilling. This gives freedom for precise placement of other parts and boards under the drill.

Notebook Stand

To prevent your favorite laptop from overheating, of course, you can spend money and purchase a special stand. But it’s better to save money and use a regular egg carton for three dozen.

Turn the box over and place the gadget on it. The cooling pad is ready. If desired, the box can be decorated at your discretion.

Lifehacks for comfort at home

Useful life hacks for the home include the following options for creating comfort:

Take a used bottle made in the original shape. Decorate the item with beads or sparkles and place it in the hallway as a vase.
In the living room, make an accent in the form of a wide transparent vase in which pine cones, pebbles or wooden crafts are placed.

Hang on the walls photographs related to positive events, picturesque paintings or unusual objects brought from travel.
Favorite but outdated interior elements that are a pity to throw away can be painted or decorated to match the new decor.
Books on shelves do not have to be placed in a vertical position; you can change the direction at your discretion.

Useful life hacks for the home: wicker baskets are a great place to store things

Cozy cute blankets, bright pillows and soft fluffy rugs will add coziness to your home.
It is recommended to cover the washing machine with a special adhesive film.

Useful life hacks for the home: you can make functional and beautiful shelves from old wooden boxes

Wires placed in a visible place can be turned into a vine by using multi-colored clips in this process.
A single switch located on the wall will become invisible between the paintings.

Useful life hacks for the home: options for hiding sockets and wires

If the refrigerator is painted with special paint, then you can write reminders on it with chalk.
An unattractive modem or some other device is hidden in its original box.

Kinder box

Do not rush to throw away the plastic egg that contained the Kinder surprise. With its help, you can not only save children's Chupa Chups, which the baby did not eat right away (video).

Put your headphones in them. This way they won't get tangled up, and the next time you want to listen to your favorite music, you won't have to spend a lot of time trying to untangle them.

What is a self-producing drilling machine?

Self-control consists of two main parts – the body of the workbench (bed, tripod and elevator) and the power unit.

Silove obladnannya

An electric drill is installed in the power unit. In the minds of the home craftsmanship, it is possible to add power tools with average parameters. To work with metal, a pressing unit is required.

Materials for benchtop

For the bench, use lumber, steel and aluminum profiles, plywood, MDF sheets and chipboard.

Sheet material is vicorized for preparing the bed. Using a metal profile, loosen the tripod. To create a drill movement mechanism, take a beam or a metal profile. The work table can be used to prepare timber, planks and metal rolls.