DIY mini-figure of a motorcycle made from nuts

Miniature versions of technology are great ideas for crafts, to occupy your own free time, and also as a souvenir for those who are interested in technology. The figurines are especially interesting because they are assembled from scrap metal parts.

Materials

To make a motorcycle figurine with your own hands, prepare:

various nuts;
metal springs;
bolts;
metal rods;
pieces of wood;
oil or wax for polishing wooden products;
soldering iron and solder;
tool for cutting metal rods;
woodworking tools;
sandpaper;
pliers.

Step 1

. Assemble the front of the motorcycle. Use a nut as a wheel. Solder two screws to it. And to them, slightly bending them in advance, attach two more elongated metal, pre-bent, thin rods. As the latter, you can take any suitable parts or thick pieces of wire.

Step 2

. Take a metal rod and cut it into two equal parts. You can determine the parameters yourself, based on the planned dimensions of the figure. Use pliers to bend the pieces of the rod. A small bend will be needed to secure the rear wheel of the motorcycle. The straight section of the rod in this case was approximately 6 cm, after this section it will again need to be bent upward, forming the part that will be attached to the steering wheel.

The rod will need to be welded to the rear wheel nut and the two parts in front of them welded to the existing workpiece.

Step 3

. Now you will need to add any details you have to the figurine, creating a harmonious composition. In this case the following were used:

two large springs welded together as a motorcycle engine;
two flat-end mounts as pedals;
lots of nuts.

Step 4

. Cut the tank and seat from small pieces of wood. First, give the parts rough outlines, then process them to a more refined shape and sand the surface to perfect smoothness.

Step 5

. Treat wooden pieces with furniture wax and polish the parts. If you wish, you can, of course, replace them with metal products of a similar shape, but the combination of metal and natural wood looks more impressive.

Step 6

. Attach the wooden pieces to the motorcycle figurine.

Ready!

3.9 / 5 ( 37 votes)

Copper wire butterfly

First, you need to learn how to make curls from wire. It is convenient to use special tweezers for this purpose.

Making a curl with tweezers

Only on the basis of such curls can you make a wonderful version of a wire craft for children - an elegant butterfly with weightless openwork wings.

Twist the second wing using tweezers.

Twist the wing

Glue a large bead in the center.

Glue the bead

Wire crafts for interior decoration

You can make such pendants part of the decor. For example, a cute octopus will feel very comfortable in your bathroom.

Wire octopus

And the bird will be a good decoration for the wall - on the terrace, kitchen, in the corridor. Wherever you want to liven up the interior a little.

Wall pendant “Bird”

You can make a Christmas decoration from wire - an angel in a laconic style.

Wire angel

Pendants on wooden planks look interesting. These can be cute figures of people.

Wire pendant "Men"

An incredibly delicate pendant can be made from dark thin wire for a chandelier.

Wire pendant for chandelier

Or flowers, mugs and hearts.

Wire pendant for home

You can also use pendants on a wooden plank as a mobile toy above your baby’s crib.

Mobile made of wire with fish

If you add a little fabric, the wire can easily be turned into a ballerina figurine.

Wire ballerina

And if you try, you can even hit an elephant!

Wire elephant

Using bottle caps, you can make chairs for toys from wire.

Wire chairs

Souvenir “Heart” made of copper wire

You can combine wire with other materials. For example, a simple but very cute heart made of copper wire can be fixed on a wooden block.

Folding a heart

Twist the wire at the base of the heart.

Twist the wire

We lay out the wire a second time. We fix the end of the wire at the bottom of the heart.

Double heart made of wire

We make a hole in a wooden cube, pour a little glue there and insert a wire with a heart there. The result will be a wonderful souvenir, which, by the way, can be conveniently used as a stand for notes, business cards and even photographs.

Wire souvenir with heart

Wire dragonfly

If you stock up on a whole set of tools, you can make much more complex and incredibly interesting crafts. For example, a piece of strong wire can be turned into a dragonfly.

Wire dragonfly

And if you use beads or seed beads in your work, the dragonfly will gain real charm. Crafts made from beads and wire are very popular; they are convenient to use in interior design, creating jewelry and accessories. And making such crafts is not at all difficult - you just need to imagine how you want to see the end result of your work, and at the right moment, string beads of a suitable shape, color and size onto the wire.

Homemade motorcycle model

Modeling is one of the interesting hobbies. So I wanted to do something new and exciting. Namely, make a small motorcycle from scrap materials. The whole process took me about 7 hours.

Initially we make small sketches of our future motorcycle. Then we begin assembling the “skeleton” of our motorcycle, namely the frame. I decided to make the frame from copper wire, because copper is a fairly strong material, and products made from it look very beautiful. And he added a spring-loaded seat to the resulting frame:

After assembling the frame, we proceed to assembling the wheels, I decided to make the base of the disks from the fasteners of pancakes from computer hard drives, I also selected a couple of gears and belts according to size:

Next we move on to the rear wing, for this I took a small copper plate. I got this copper wing. Then, from the same plate, by cutting and a little soldering, I made a fuel tank.

Then I made a front wheel fork from wire, made a steering wheel from thinner wire, and wound springs from even thinner wire. I put everything together and hung the necessary parts in their places.

Next we begin to make the engine, I had to rack my brains over it for several hours, but in the end I found a wire of the appropriate size and began turning and knocking out the cylinders. (Instead of wire, you can use tin solder, it is softer)

Then he adapted the gearbox to the engine, created a similar pattern to the real ones on the cylinders (made ribbing) and added wires that in the original are connected to the spark plugs.

I made an exhaust system from wire and small tubes.

Then he covered the seat with leatherette. Using the same leatherette, I made a simple trunk. And then I assembled everything from a plastic cylinder and, using transparent plastic, made a headlight. I modified the steering wheel with rear view mirrors and small handles.

And the last step is painting. To do this, I took regular nail polish; it sticks to metal quite well and dries quickly.

Here are some photos of the finished motorcycle:

By the way, this is my first modeling experience. And I can say that this activity is very exciting, although not so simple. And I already gave the motorcycle I created to a friend, he was very happy. By the way, this is a very good gift option for motorcycle lovers or is very suitable for bikers.

Become the author of the site, publish your own articles, descriptions of homemade products and pay for the text. Read more here.

Homemade motorcycle model

Then I made a front wheel fork from wire, made a steering wheel from thinner wire, and wound springs from even thinner wire. I put everything together and hung the necessary parts in their places.

I made an exhaust system from wire and small tubes.

And then I assembled everything from a plastic cylinder and, using transparent plastic, made a headlight. I modified the steering wheel with rear view mirrors and small handles.

And the last step is painting. To do this, I took regular nail polish; it sticks to metal quite well and dries quickly.

Here are some photos of the finished motorcycle:

Source