Why know how to make a human trap? Some are driven by simple curiosity, others need it for reasons of their own safety, and others want to catch a burglar.
Usually people hunt birds and animals, set traps for large and small game. Since ancient times, man has adapted to provide himself with furs and meat by captivating animals. Let's get acquainted with some of these devices to find out whether and how to make a trap for a person at home.
Venter, mousetraps, nets, pits
Traps are technical devices made of metal, ropes, branches, and the use of natural features of the terrain to capture a victim or take his life. The object can be either an animal or a person. And for the hunt to be successful, it is necessary to take into account not only the size, but also the habits, lifestyle and disposition of the intended victim. How to make a human trap? Here is a small list of devices that can help in this endeavor:
- Snares, networks, tenets. Although they are usually used to capture hares and birds, these traps may well detain a potential victim, in our case, a member of the human race.
- A bucket of water mounted above a slightly open door is one of the options for a homemade trap.
- A banana peel thrown at the feet of an attacker will cause him to fall to the floor.
Master Class. An example of making a simple bee trap
Let's consider a budget option for making a trap, which has been done many times and successfully tried.
Simple bee trap
Step 1 . To work, you will need a minimum list of materials and tools. In the example, the author uses unnecessary slats, tape, a jigsaw, garbage bags, a stapler and cardboard boxes.
Step 2 . Then the frame of the structure is assembled. The slats are connected using a stapler.
Step 3 . The frame is covered with cardboard. A frame with wax and old drying material is installed. The frames are fixed with a piece of cardboard.
Step 4 . A garbage bag is pulled over the resulting structure, wrapped with tape, after which a tap hole . Actually, this is where the work ends.
Expert opinion
Ponomarev Sergey Stepanovich
Beekeeper with 30 years of experience, Candidate of Technical Sciences
Under the tap hole on the front wall, the author nailed a piece of old, polarized canvas, using the same stapler.
Like in the movies
There are traps that make it impossible to survive if you fall into them. Similar constructions were usually set up during hostilities by partisans in Vietnam. And the hunters of African tribes knew well how to make a trap for a person.
You should always be careful in the forest, as an ordinary anthill can turn into a trap. Moving logs, stones falling from nowhere and other “miracles of engineering” are very colorfully demonstrated in many films, and so clearly that even instructions on how to make a trap for a person are not needed.
However, let’s leave these methods for the movies, and in modern realities simple and safe methods are used. Although. Let us remember the well-known and beloved film “Home Alone”. Not all of the traps prepared by M. Kalkin’s hero can be called safe for health. And of course, they became an unpleasant surprise for the villains. However, we will talk about thieves, or rather about ways to “eliminate” them, a little later, but for now.
Gaming and fun net
Of course, traps are not only scary and dangerous, but also playful. How to make a human trap in the house? If you want to entertain the children and the space allows, you can arrange the game “Overcoming laser obstacles.” You need to do the following:
- place several chairs around the room at different distances from each other;
- take a ball of thick thread or a long rope;
- tie one end of the thread to the leg of one of the chairs;
- stretch a thread or rope from one piece of furniture to another, securing it at different heights in any order;
- the second end of the rope must also be attached.
As a result of such manipulations, you should get a kind of “obstacle course”, reminiscent of a network of light rays.
Participants, being on one side of the room, must move to a free part of the room. Whoever gets out the fastest wins. Is it worth mentioning that you can’t touch the “laser beams”?
FAQ. Answers on questions
Why do you need a bee trap?
This is a necessary and very profitable thing that allows you not only to benefit the ecosystem, but also to avoid excessive costs. There are many models of traps on the market, but it is cheaper to make one yourself. Only a few materials and minimal construction skills are required.
Why do they catch bees at all?
Catching wild bees is not only economical, but also useful. This way you can get bees for free, and also save them from death. In the future, in just a couple of years, a small swarm of bees can turn into a full-fledged apiary.
How to protect a new family?
A new bee colony must be protected from “thieves” from neighboring apiaries, otherwise it may be destroyed by a larger family.
Is it possible to set a trap in a populated area?
Traps are installed outside populated areas: their pollution, electromagnetic radiation and noise usually repel insects.
When is the best time to move bees to the apiary?
Transfer it in the evening, always after dark. After all, during the day most insects fly outside.
Beekeeper's smoker: types, how to make it yourself
DIY smoke cannon for bees
DIY bee deck
DIY Dadan hive
Keeping Bees for Beginners
DIY hive frames
Bee bread: types, features of obtaining
Keeping bees in populated areas
How Auntie Scared Thieves
Of course, in peacetime, variations on the theme “How to make a trap for a person” are usually sought in order to protect one’s home from the invasion of uninvited guests. Our people are cunning, they invent such methods that you are simply amazed.
For example, one of the townspeople made a large rag doll, dressed it in her old robe, and put a wig on her head. Before leaving for the dacha, the woman hangs this mannequin in the corridor in front of the front door. Any thief, having climbed into a house and seen such a picture, will forget about the purpose of his “visit” and retreat. Well, okay! After all, the main thing is to protect your property, and not to catch the villain.
Some craftsmen connect one of the lamps with a timer, which turns the lamp on and off from time to time. This creates the impression that there are owners in the house.
How to catch bees correctly?
Bees are quite whimsical, and therefore it is not easy to lure them to the apiary. They cannot stand artificial odors, but they are attracted to sources of honey and other bee products. Therefore, you need to make bait based on propolis, honey and other things.
Important ! The honeycombs and walls (inside) of the structure should be generously wiped with bee products. You can also additionally use thick sugar syrup by covering the honeycombs with it. Remember that in nature bees live in hollows, so the trap must be fixed at a height of at least 3 m.
Honey
Wax
Propolis
Perga
Finally, we will consider the rules for transferring a hive to an apiary.
- Transfer it in the evening, always after sunset . After all, during the day most insects are outside.
- The trap must be transported immediately . Otherwise, the bees will experience severe stress and most of the swarm may die.
- When working with bees, protect them from strong odors (gasoline, household chemicals, perfume, etc.) . They can make insects angry.
See also : Do-it-yourself hive-bed for 24 frames. In addition, you may be interested in the article about the queen bee.
A trap on your home street, or About safety precautions and inattention
How to make a trap for a person on the street? It is not always necessary to deliberately dig holes, insert stakes or set snares. An open sewer manhole and an unfenced trench, a construction pit and a well with boiling water from a heating main can become a deadly trap on the streets of a modern city.
If there is construction going on near your home, you must supervise children and teenagers. After all, they are so interested in being in the “excavation” territory, and games in such a place often end in failure: spinal injuries, fractures and concussions.
To avoid falling into an open well, you need to carefully watch your step when moving on the sidewalks. Of course, builders and repairmen must install fences and warning signs when working on potentially hazardous sites. However, to maintain your own health, you need to take care of yourself.
Traps are designed not only to catch various living creatures, but also for protection. For example, if a thief comes to your summer cottage or apartment, he can easily fall into the trap that you set for him.
Content:
Remember that in the forest you can find traps set for animals. However, if the trap is designed for a large animal, it will also harm you, so be careful.
In total, there are four types of traps that operate according to different principles - impact, suffocation, suspension and immobilization.
Remember that, for example, traps can immobilize or injure a person, so be careful when placing them. If you nevertheless decide to make a trap for a person, take care of its careful camouflage, since a person is more careful and cunning than animals.
Now we will tell you how to make a trap using available materials.
Features of making a bee trap with your own hands
You can make bait from almost any material you have at hand. You can also use even a well-dried log for this, as noted earlier, but such work will require first-class carpentry skills and a lot of free time. Therefore, in this article we will look at some of the simplest options.
Before starting work, clearly determine how far the trap will be from the apiary; this distance will affect the size and volume of the structure. If the apiary is located next to meadows or forests, then the bait is made quite large - at least 8 hundred . Such traps are two-tier structures that allow you to catch several bee colonies at once.
If there is no optimal place nearby, the trap is made mobile, on one tier. The small structure can be quickly moved to another location without much effort. It also provides bees with a space of about 50 liters.
Expert opinion
Ponomarev Sergey Stepanovich
Beekeeper with 30 years of experience, Candidate of Technical Sciences
A new colony must be protected from “thieves” from neighboring apiaries, otherwise it may be completely destroyed by a larger bee colony.
The easiest trap in the room
Pull the thread between walls that are close to each other (for example, between the walls of a corridor).
Place the wooden block vertically so that the thread keeps it from falling.
Now take a spoon and place it where the block will fall after hitting the thread. Calculate everything so that the spoon flies up after the block falls.
Now you can put a small object, for example candy, on the opposite end of the spoon. After someone snags the thread, the end of the bar will hit the spoon, and the candy will fly towards the “offender”.
How to make a human finger trap
This trap was invented a long time ago in Asia. The essence of its work is that both index fingers are inserted from different sides of the tube. After this, it is almost impossible to pull your fingers out of the trap, and the more effort you put into this, the tighter the trap tightens.
Making such a trap is not at all difficult.
In ancient times, the Chinese used bamboo for the base, then the trap was durable. We will use paper for this purpose.
Take two sheets of paper of different colors, then the craft will look nice. In addition, it will be easier to do.
Cut out four strips from paper - two from one color and two from another. Their thickness should be twelve millimeters, and the length of a standard sheet of A4 paper on the longer side.
Now glue them together to form corners. To do this, glue a strip of a different color to a strip of one color at an angle of ninety degrees. Do not overuse the amount of glue, otherwise the paper will get wet.
Now you will need a cylindrical object of such length that both of your index fingers fit there. Since the craft is absolutely not dangerous, it can be done even for a child, but take into account the length of the cylinder.
Military man traps
Now let's look at more dangerous types of traps that are used even in war. Let's take the Vietnam War as an example.
In order to warn your own people and not forget about the mine yourself, the location of the trap was marked with different marks, examples of which are shown below. These same marks even indicate how far away the mine is.
The process of setting a trap.
The most popular and frequently used trap is the punji. The cost of its production is low, so this type of trap was very common during the war.
To make it, dig a small hole and cover it with a board into which you drive nails or place stakes. Place the board with the tips facing up and sprinkle it with leaves. Believe me, by stepping on such a board, a soldier can even pierce his foot.
This type of trap can be improved. The figure below shows everything clearly.
Punja board. It was placed where there was a narrow passage and carefully camouflaged. The basic principle of operation of such a trap is that the soldier falls into a dug hole and receives a blow to the chest and head with a board.
We will not describe traps that use any type of weapon, because it is unlikely that you will be able to get the necessary parts.
DIY trap for 6 Dadan frames
This trap is lightweight, inexpensive and simple in design. swarms large enough to cover 6 Dadan frames.
DIY trap for 6 Dadan frames
What materials will be required to assemble such a trap:
Plywood 4 mm thick
Nails or screws
Bars of different lengths 15x30, 15x20 and 15x15 mm
Tin, galvanized or roofing felt
Anyone can assemble a 6-frame design using the Dadan system without any problems. Among other things, the finished box can be used as an apiary frame for 6 frames.
Look at the general appearance of such a structure.
General view of a 6-frame trap
And this is an assembly drawing of the end. The taphole shape ; in our example, it measures 10x100 mm.
Assembly drawing of the end of the trap
Check out the drawings of the bars. Before screwing a self-tapping screw into a block, we recommend drilling a thin hole in advance to eliminate the risk of splitting the wood.
Drawings of bars for a 6-frame trap
Below are drawings of plywood parts. The required plywood thickness is 4 mm. You should not use fiberboard without a protective coating due to its high hygroscopicity, as well as fiberboard or cardboard.
Drawings of plywood parts
Note ! You should not skimp on material, since high-quality plywood, if painted well on the outside, can last at least 10-12 years.
Fighting methods
They fight cockroaches with a variety of means, here are the main ones:
- Chemical and folk remedies.
- Freezing.
- Electric repellers.
- Traps.
- Call the SES service.
An important condition is that the apartment is clean and there is no open food. It is its smell that mainly attracts these parasites. It is also recommended to carry out a thorough spring cleaning and empty the trash bin in a timely manner.
Important! In addition to dirt and the smell of food, cockroaches are attracted to moisture. Puddles left on the floor or table, a leaking faucet - parasites can come running to all this.
If any of this attracts pests, they will start looking for ways into the apartment. They can crawl through cracks in the floor, walls, ceiling and windows, then hide in secluded places: behind cabinets, upholstered furniture, under the sink, under peeling wallpaper. After cleaning the room and making the necessary preparations, you can begin processing.
The right time to set a trap
In addition to the appropriate location, it is also worth determining the optimal time to set traps. Often insects leave their homes only once, during the swarming . This process is accompanied by the division of a large swarm into families, which fly away to populate new territories.
This usually happens at the end of May, when many flowering plants appear, it is at this time that we recommend setting traps. There is no point in doing this earlier or with the onset of summer; the chance of catching bees in another period is practically zero, but the risk that they will be spotted by ants, hornets or wasps increases significantly. And expelling them from the house is very problematic.
Traps for stray bees
How to make your own trap
The use of traps is no less common, as is the use of other means. You can usually buy them (they come in adhesive, electric, and poisonous varieties), but it's much less expensive to make your own.
Homemade traps can be made completely safe for households and pets using the most convenient of numerous recipes. Store-bought traps often have toxic odors that are harmful to the human body. DIY traps are no less effective.
From a plastic bottle
You can use a bottle to create a pest trap in minutes. To do this, take a bottle, cut it so that the bottom part is twice as long as the top. Place the bait in the bottom one and pour water, then cover it with the top one, turning it upside down, spreading the walls with fat or a fat-containing product. One of the disadvantages of such a trap is that the smell of the bait is prevented by the narrow opening of the plastic bottle, so it will not be very effective at attracting insects.
From a box of markers or pencils
Such boxes are convenient because they are flat and have a hole on the outside. Their shape is closest to commercial ready-made traps. The inside of the box needs to be sealed with glue or double-sided tape, and then a treat that attracts cockroaches should be glued in the middle. Its smell will allow you to catch insects that will stick tightly and will not be able to get out.
What it is?
In the beekeeping field, traps are various devices made from artificial or natural materials and designed to attract stray/ wild bees. The shape of such traps can be different, but most often they are square or rectangular boxes made of plywood or EPS.
Another do-it-yourself bee trap is often made from a log (the tree species most common in the region is used), then the design is cylindrical in shape. A cavity is created inside the trap for 5 frames , although often the number of frames increases to 6 or even 8 pieces. Thanks to this, the effectiveness of the device significantly increases, because bees, in search of new hives , usually give preference only to the largest objects. Each bait is equipped with only one entrance with a bolt. After insects populate the bait hive, the entrance is closed, and the “captives” are transferred to the apiary .
On a note ! Beekeeping is one of the most ancient economic sectors. Despite the fact that beehives were invented only in the 7th–8th centuries BC, primitive man was also successfully involved honey
What to do if pests don't go away
A less popular method is repellers. Electric repellers are used mainly against mosquitoes, but they do not always work against cockroaches. Although a good, expensive device will almost certainly remove parasites if used correctly.
Another method is freezing. But it only works in winter. And then, only when it is possible to turn off the heating. Cockroaches flee or die from the cold. If it is cold enough, open all doors and windows and leave the apartment for at least half an hour. It is recommended to repeat the procedure several times every 5 days.
Note! Another effective way, but also costly, is to call professionals from the sanitary and epidemiological station. They will certainly finally remove the annoying parasites if the previous methods did not work.
Do-it-yourself half-frame trap
Let's start with the fact that a structure of this type does not have a very large volume, but bees, due to their unpretentiousness, will populate it too. the drawings below to create a half- frame
But first, let's talk about what materials are needed.
- The bars are made from any dry and tolerable wood (it can be pine, spruce).
- To make the roof, bottom and walls you will need plywood 4 mm thick.
- The lid additionally needs to be covered with some kind of material to prevent moisture from getting inside the trap. It is better to use thin sheet metal or galvanized steel; polyethylene and roofing felt will last for several seasons, but will cost less.
- The shape of the taphole can be any (or the same as in our drawings).
- Self-tapping screws will also be required to assemble the structure.
- For painting, it is advisable to use acrylic paint (it does not smell and dries quickly enough).
This is a general view of the design of a magazine half-frame .
Assembly drawing of the trap
And this is an assembly drawing of the end of the structure.
Assembly drawing of the end of the trap
The bars in the example have a cross-section of 15x20 mm and different lengths. Before screwing a self-tapping screw into a block, we recommend drilling it with a thin drill first in order to eliminate the risk of splitting.
Drawings for bars for the trap
Bars for the trap
Last fragment of drawings
Plywood, as noted above, should be 4 mm thick. You should not use fiberboard without special protection due to its high hygroscopicity, just like fiberboard or cardboard.
Trap end
Side of the trap
Bottom of the trap
Trap roof
Note ! Such a trap will be cheap. A couple of sheets of plywood are enough for 5 structures. Another similar trap can be used to store magazine frames, or as cores .
