Paracord knife handle. We make the braid of the knife handle ourselves

Main types of handles for 19 l bottles

The following options are known on the market:
Handles made of polymer/plastic materials. This is a compact handle specifically for transporting standard-shaped 19-liter bottles. The product fits comfortably in the palm of your hand and has grooves that allow your fingers to rest comfortably. And the special bend allows you to significantly reduce the load on the hand.

The rubber handle, made of rubberized plastic, is also designed to be used as a carrying device for 19-liter bottles. Its design ensures a strong fixation on the neck of the container, preventing the container from falling, even when filled to the top with water. The bend of the handle is made according to the general scheme, as in the model described above.

The shape of rubber-based holders can be curved or flat. The superiority of rubberized handles for plastic bottles over polymer ones is obvious - increased tenacity, lack of slipping. This gives significant benefits at elevated temperatures, when your hands get wet from sweat, as well as at low temperatures, when the plastic slips when gripping in the cold. Also, on the plastic bottle itself, rubber-based holders are fixed tightly and do not move.

Materials and tools

You don’t need any special knowledge or tools to wrap the handle with paracord. The materials that are required are also affordable for every average person. The list is pretty simple:

• paracord cord;
• scissors;
• knife;
• scotch;

• lighter;
• insulating tape;
• vice.

How to choose paracord

To make the right choice, you need to understand what it is. Paracord means a strong and lightweight rope. By unraveling the base, you can find any use for the cord. The range and colors of paracord are quite diverse.

Many useful things are woven from cord. It is suitable for all kinds of devices. Today, American products from . It is considered a certain standard and is labeled as 550 Paracord.

It is counterfeited quite a lot, you should be careful when purchasing a cord. As a rope, the product is quite strong. It can withstand loads of up to 250 kg. But such a cord is not used in mountaineering. In all types of tourism it is quite useful for passive insurance.

Expert opinion

Konstantin

Since childhood, I have been interested in knives and everything connected with them. I bring the accumulated knowledge to the masses. I make knives myself. I take criticism positively, but I also like to argue.

At the core of the paracord there are 7 cords woven from nylon, each of which contains three strands. The shell is made of 32 nylon threads, all of which are intertwined. If you come across a product from China, keep in mind that they use polypropylene instead of nylon. This rope can withstand no more than 150 kg.

How to distinguish real paracord from fake

As already mentioned, real paracord comes from the USA. There is a certain quality standard for cords. And it doesn’t matter in which country it was produced, the main thing is that it meets this standard.

But sellers often use the word paracord to sell anything.

But knowing some nuances about paracord, you can distinguish a fake from a real product:

1. The first sign of a quality product is its softness. It is for this reason that it is convenient to weave various products from it.
2. Taking it in your hands, set fire to one edge of the rope. It should burn with a smoky flame with black smoke. The smell will be like burnt plastic.
3. Again about the combustion of the material, keep in mind that the shell and core do not fuse together. The outer layer will melt faster and expose the inner layer. The experience will be similar to stripping the insulation from a wire.

The handles are wrapped with paracord.

Homemade rope handle for a plastic bottle

In the future you get lots of DIY projects from them) ************************************** ********************** Welcome to my channel Roman Ursu where you can learn how to make hand made crafts, New Year crafts, presents, toys, Halloween scares. The main thing is that you can make it at home and with one's own hands. Are you interested in handiwork, crafts or you just have nothing to do, don't you? If yes, you are on the right channel. Here you can find lots of crafts, hand made items. The main thing is that they are made of materials at hand and they are low cost. **************************************** ********** The main channel: youtube.com/user/romanursu My second channel: youtube.com/user/romanurs… Vkontakte community: vk.com/club59870517 Odnoklassniki.ru community: odnoklassniki.ru/ romanursu

Popular articles Congratulations on March 8th. Ideas for congratulations on March 8, 2022

Attention! Be careful and don't try this at home. The isn't responsible for your actions and the video is for entertaining purpose, but not for teaching purposes and is not call for an action! ATTENTION!!! — my channel is for decent people only. I will BAN users for swear words, both in shortened and disguised, insults and trolling!!!

The procedure for making the device

First you need to make two identical wire hooks like this with small loops or rings for threading the rope.

To do this, first bite off a small piece of wire with wire cutters and straighten it with a hammer. Then, at one of its ends, using long-nose pliers, we form a small ring, not necessarily perfectly round.

After this, bend the other end of the wire like this, forming a hook 2.5-3 cm long.

We bite off the tip of this hook diagonally with wire cutters to give it a point. However, so that the tip is not sharp, we slightly dull it with a file.

We do the second hook in the same way.

Then we take a piece of rope or strong cord and thread it through the rings of our two hooks, and tie the ends together with a knot.

And now our device is ready!

For greater convenience, you can also put a small piece of some metal tube or even just a heat-shrinkable tube on the rope handle, something like this.

However, I did not do this, because in this case, this device will become less compact and it will no longer be possible to fold it this way, for example, for carrying in a pocket.

Water coolers.

Water coolers are modern specialized devices that combine functions such as heating and cooling of clean artesian water, which is packaged in containers. It should be noted that the coolers are quite compact in size and do not take up much space even in small office or residential premises. A classic cooler looks like this: a bottle of water is installed on top of the equipment; in most cases, this is a container equal to 19 liters, which can very quickly be changed to a new bottle.

Unlike a cooler, a pump is a classic pumping device that can be used to pump water from large containers. Today, pumps come in two different types: electrical and mechanical. Mechanical pumps operate under human influence, such as hand pressure. If we talk about electric pumps, they can operate from an electrical network and from AA batteries.

Resin coating

Now you need to completely wrap the blade and other parts that should not have resin on it with electrical tape.
You can, of course, remove it from steel, but why waste time on it. Mix a small amount of fiberglass resin. I used 30 ml, but half would have been enough for me. I just didn't have a smaller measuring cup on hand. Take an inexpensive brush and use gentle strokes to apply the resin all over the lacing. Let it soak, if necessary apply the resin again. Then clamp the blade in a vice to dry the handle. After a few minutes, remove the knife and turn it over so that the resin does not harden in a bead on the downward side of the handle. Sometimes, in order for furniture to take on an updated look, it is enough to replace only its handles. This works especially well with chests of drawers and cabinets that have many drawers. Unusual handles can be purchased at furniture and home decor stores (we tried this, read the report), but how much more pleasant and cheaper it will be to make them yourself!

knife handle made from a plastic bottle

How to make a rope from a regular plastic bottle

Summer is a season of rest. Many of us will go to the dacha, some will organize a picnic. In such places, a strong rope is often needed to secure something or hang it to dry. But there may not be a rope at hand. There is no reason to be upset, since a strong rope can be made from an ordinary plastic bottle, which will definitely be present on the table.

Popular articles Ideas for congratulations on March 8, 2021

Watch how to make a rope from a plastic bottle in the video:

So, in order to make the process of making a rope easier and less labor-intensive in the future, you can first take care of the machine that will be used to make the rope in the future.

In order to make our own machine for making rope from a plastic bottle, we will need a wooden block that can be lightly sanded on one side, creating something like a handle for greater ease of use.

The first step is to make a gap on the top of the block using a metal hacksaw and clean it with sandpaper.

Weaving pattern and process

There are a large number of different nodes and ways of winding the blade. One of the simplest and most popular methods is criss-cross winding. It is performed as follows:

1. Place the handle in the middle of the paracord. Cut a long piece of cord and place it on your work surface. Place the handle in the middle of this rope. The length of the cut paracord should be four to five times the length of the handle. At the end of the winding, you can cut off the excess.
2. Fold the left end up. Wrap it around the top of the handle and pass it under the right one, pointing it down away from the blade. Both edges should form a loop across the handle. The intersection of this loop should be on the right side.
3. Pass the right edge of the cord through the loop. Take the second ending (the one you haven't used until now) and pull it through the loop from the back. Bring it out from the left side. It is necessary to stretch this edge from the back of the loop (the one that is under the handle) through its base, extending it through its top. This step will secure the loop in place. Pull both ends of the paracord firmly to get a firm grip on the handle. After this step, the right and left edges of the paracord will switch places.
4. Fold the right end up. Grasp it and fold it over the handle below where you created the previous loop. Pass the right edge under the left, pulling it under and out at the top. As before, you will end up with a loose loop. This time the intersection point should be on the left side.
5. Place the left edge behind the handle. Take it and pass it under the handle of the knife.
6. Thread the end through the loop. Take the end you manipulated in the previous step and pass it through the loop on the right side of the handle. It is necessary to insert the edge of the loop from bottom to top. Pull the paracord tightly, securing it in place. At the end of this, the cords will again change places.
7. Each time, mirror the previous actions performed on the other side of the handle. After tightening the loop on the left, repeat the steps exactly, but this time on the right.
8. Repeat until you have wrapped the entire handle. Continue making criss-cross stitches along the handle of the knife, keeping them as close as possible to it and to each other, until you reach the edge.
9. Thread the ends through the hole. Pass both ends of the cord through the hole on the edge of the knife handle. In the latter case, to secure the winding, tie the edges with a knot on the side of the hole.
10. Tie an end knot. Tie both ends of the paracord into a strong knot. The resulting loop can be worn around the wrist.

After completing this step, the winding is completed.

What do handles look like for 19 l bottles?

Initially, for ease of delivery and consumption, a universal 19 liter bottle was developed. Then the need arose to create a holder that was most optimally suited for carrying containers

At first glance, it may seem that this handle is not such an important device. However, it is in simplicity that the genius of the invention lies.

I must say that now it is difficult to imagine transporting a bottle without a handle. This simple device makes carrying containers much easier. Therefore, purchasing a handle for a 19 liter bottle is a very smart decision.

Firstly, the use of removable handles makes the process of carrying 19 l bottles incredibly easy and convenient

Finally, the compact and easy-to-grip design makes it difficult to move even large quantities of 19-liter containers, with or without water.

Knife leather trim

Before using the leather, it should be soaked in warm water. This will make it flexible and pliable. The pieces of leather should be kept in water for several hours. To finish the handle of a knife, tanned leather is best suited. The softened material should be wrapped around the knife handle.

This way you will be able to mark where the excess will be trimmed. They are then removed with scissors. But we should not forget about seam allowances; leave 2.5 mm on each side. Next, holes are pierced with an awl along the entire length of the flap. The overlock stitch will go through them.

After stitching, a knot is tied at the end of the thread. Next, the knife is put aside for a day to dry the skin. Be sure to wrap the blade with tape or plastic to prevent injury.

Leather braid

The process is not complicated, but there are some minor nuances. Before use, the leather should be soaked for several hours. It will become soft and comfortable to work with. The cord used should be 6-8 mm wide.

To braid the handle of a knife, you will need a cord four times the length of the handle.

A piece of leather should be attached to the handle with double-sided tape. One end of the strap is applied to the length of the knife handle. To secure the cord, we make several turns around. When wrapping, you should press the skin as hard as you can.

The first turns will hide the tape and you should continue further. We wrap the handle to the very end. There will be two ends left; they must be tied tightly and hidden under the skin. Make sure that there is no empty space between the turns.

Leather braided knife.

Where to buy handles for carrying 19 l plastic bottles

engages in supplies to Russia of coolers, pumps and related equipment designed for bottling water from bottles of various sizes. All equipment is supplied under the “ECOCENTER” brand.

We provide the best price-quality ratio of equipment, and also offer our partners excellent service and flexible terms of cooperation.

Popular articles Hair decoration “Tricolor rose”

You can see the attractiveness of collaboration by comparing our prices with similar equipment from other suppliers.

All our equipment meets the standards established in Russia and has quality certificates. We deliver dispensers to our customers, as well as all the necessary spare parts and components in the shortest possible time.

Life hack for carrying flat boxes

No duplicates found

that's what an old experienced dick means

Yes, you young people are completely crazy :)

it's called an engineer, not an old dick :))

One dick will hit your leg from the side and it will still be uncomfortable to carry

Yes, it’s not at all comfortable, which means you’ll have to carry it mm.. on your head.. or take it in your hands and carry it sideways, it’s not very comfortable, but it won’t hurt your leg!

Comfortable to carry weights on your head

Fucking life hack. I've been using similar methods all my life. Newfags are going nuts.

Sorry, I honestly didn’t know this method)

Only the cost of a mistake will be great if the tape doesn’t hold up

No shit. Wrap at least 20 layers. If there is a rupture in one place (one sharp element is enough, which is located in the carbine at the bolt points), then the pussy is complete.

I'm telling you this as a former seller. I know a lot about adhesive tape. And I would never risk carrying a TV with improvised handles intercepted by metal carbines. I always told my customers: you don’t need these cheap fucks for convenience. Like handles made from tape. If you are buying an expensive item, it is better to take a cart and take the goods to your car. And then with your own hands. If you don’t have a car, then Gazelle is delivered.

Electrical tape doesn't stretch so well and can easily be torn by hand. If you glue, then only with gray mounting tape. Reinforced.

A life hack is to order the same thing from an online store, but much cheaper and also with delivery.

Ty. Every week when I go to buy a TV I do this.

Why should I buy? I just walk around with the box like that - let everyone think that I change TVs like gloves.

How the water container is sealed

If the company that delivers water throughout Moscow takes a responsible approach to providing its services, the tank must:

• sealed with a stopper with a valve that must be opened by the consumer;
• equipped with a special sticker that acts as both a hygienic barrier and an information part containing data on the date of the spill or the type of water;
• has an outer shell of shrink film on the cork, indicating the absence of damage or unauthorized access to the product.

Such complex protection means that the container must be opened in a certain order.

We make unusual handles for a mini chest of drawers or caskets

Everyone knows that handles are an important part of the decor of any furniture. And we approach their choice with the utmost seriousness; fortunately, there are plenty of offers on the market - from very cheap ones to exclusive ones costing over a thousand.

But no matter how we choose, there is always a chance that someone will choose exactly the same ones. And it’s good if the handles are chosen for personal use, but what if they are used to decorate a mini chest of drawers or a box for sale? After all, then it will be difficult to talk about the exclusivity and uniqueness of this product.

I won’t write anything about how many repeating serial decorative details there are in different works by different masters. I decided this question for myself simply - I do everything myself (including the pens) from start to finish.

There are no purchased items on my boxes and mini-chests; I don’t have to choose anything from what’s on the market. The handles that I make are an integral part of the look of a box or mini chest of drawers.

In this master class I will tell you how to easily and simply make handles for drawers of mini chests of drawers and caskets.

First of all, you need to come up with a form. Then draw this shape in any graphics editor. I use Corel Draw for this.

After the pens are drawn and you are satisfied with the result, you need to print them on a printer. You can print on regular office paper. For what, I will explain below.

The handles will be composite - made of two parts. One, the lower part (thicker and wider) is the base of the flower. The second, upper part (thinner and smaller) is the pistil or stamen. In general, what gives volume and appearance