DIY cardboard steering wheel for a pirate costume

If you are a lover of pirate themes, a potential “gentleman of fortune” and you already have a pirate costume for Halloween, but don’t yet have a helm, then it’s time to correct this injustice! I'll tell you how to make a steering wheel out of cardboard!

The material for a DIY cardboard steering wheel will mainly be cardboard.

Cardboard is a fairly common, cheap and environmentally friendly material.

DIY boat for children

Gifts are always a pleasure not only to receive, but also to give. And if you made this gift with your own hands, the recipient will be doubly pleased. I invite you to see how the author, with straight arms, built a boat for a kindergarten. It all started when a year ago, in the kindergarten where my daughter goes, the window sills were replaced. The old window sills were broken out and thrown into the street, and PVC was installed. Our teacher asked if it was possible to make something like a boat out of them for the playground, since ours was very modest. So: the boards were (without pity for the interior of the car) transported to the garage, I don’t remember how long it took before I got to the used lumber, but not right away, I wanted to invent something on paper to begin with, but nothing came up in the end, I went to the garage to improvise... to begin with, I folded the boards and figured out how long the ship would be, so that two benches would fit, two small sailors each, plus the captain, at the helm, if on a grand scale. The most important tool in shipbuilding is the axe!

Then I began to draw some lines, think about the height of the sides, technological holes for fastening, etc., I wanted the end result to be a ship, and not something like a coffin.

There was something in the garage from the previous owners that could be useful, I dug up an old ax handle while it served as a mast for reference..

in this photo there is a big leap: the ax handle has migrated to the nose, and will remain there; the entire thick layer of paint was removed from the boards using a purchased gasoline torch, for those who don’t know: we use a torch to heat up a section of the board, as soon as the paint swells, carefully cut it off with a narrow trowel, the main thing is not to overheat, otherwise the board will burn and darken, and you will have to grind a lot of things without it.. Using a jigsaw, holes were cut out for the anchor chains, windows in the back and holes were cut out in the sides, which were supposed to resemble cannon shells with a wick)) . At the same time, wiring was being done in the garage because the previous owners had not inherited electricity, so they had to cut it at home, delighting the neighbors.

Here I am already estimating the height of the mast, the rope was also found in deposits..

we walk around, look, estimate, and use a tape measure to measure the height of the future mast.

On the right side it was sanded, on the left after removing the paint with a torch, at home I sanded it slowly in the evenings by hand with a float and sandpaper. I had to sand it very carefully, because I absolutely didn’t want to hurt the delicate butts of small sailors with splinters.

I had to carry some parts of the boat from the garage home from house to garage. Let's move on to the filling, namely the steering wheel, what kind of ship would it be without a steering wheel? I was thinking about making something that would look like a steering wheel, in the end I decided to make it myself, took two pieces from the same window sills, put them together and figured out the diameter, it would be just right!

: Winding the rope

This step is not too difficult, but it will take you a lot of time. Cut six pieces of rope, 6mm thick and about 1 meter long each. Coat each spoke of the steering wheel with glue and wrap pieces of rope around the spokes. It turns out pretty good.

War machine

If a child is interested in military equipment, then he will be interested in assembling some kind of military vehicle.

In this case, there are two options for a military vehicle.

The first option is using the finished printout presented below:

The second option is to create a car based on the principle of a fire engine.

To create such a car, various boxes are also selected, connected to each other and painted or covered with paper of the required color.

Features of working with cardboard

Cardboard is a dense and reliable material from which, if desired, you can make various crafts. Working with it will not cause any difficulties if you apply these tips:

if the cardboard is thick, take sharper scissors or cut it with a stationery knife;
If you are going to bend the finished parts of the product along the drawn dotted lines, trace their outline with the blunt side of your scissors or with a non-writing pen - the cardboard will bend easily and much smoother;
A glue gun is effective, but not always suitable - if the material is thin, it is easier to replace strong glue with PVA or regular office glue;
Make sure that the room where you will work is not too humid, otherwise the finished products will later delaminate or the parts will not stick together properly;
regularly ventilate your room, adjust the light;
if the model is complex, watch videos instead of text master classes;
work in stages when the mood is good.

Beginners usually start simple, gradually making the task more difficult for themselves. Anyone can make a ship out of cardboard, even a child. If you follow all the instructions.

: Making handles

So, it's time for pens. The easiest way to make handles is from sticky tape. Wrap one end of the tape around each steering wheel spoke. You'll have to put on a ton of tape, but the handles will look pretty good.

Now put all the pieces together again to check if everything is going well.

Steering wheel for decorating a nursery

The children's room looks good in a marine style. To do this, you will need all kinds of marine attributes - ropes, shells, lifebuoys, ships and a steering wheel. This is what we will create as decoration. We need to cut out a template from the base material, cut the white rope into equal pieces and glue it to the cardboard using PVA.

You can make several of these products and decorate a bed or front door.

Crafts and paper machine applications

Applications are always relevant, and especially relevant when the family has a son or grandson. At any moment, you can sit down and make a cool craft with your child, which can interest him and make him even more inquisitive. There are a huge variety of options for machines in all kinds of techniques. This can be either an applique or a craft; accordingly, the applique will not be a voluminous work, but the craft will become a three-dimensional figurine and can even serve as a toy for the baby.

The peculiarity of such a craft is that it will become a call to get the child interested in the activity that he usually sympathizes with. It is all kinds of models of cars in different techniques that will make it possible to interest a child. Below are several options for machines in different techniques.

Manufacturing without a template

You can take the simplest route. So, for work we need:

thick cardboard;
wooden skewers;
scissors;
pencil;
glue;
threads;
paints.

First you need to draw two circles and cut them out. Inside each circle, you need to cut out another circle so that you get cardboard rims, as in the photo:

The size of the headbands should be the size you want the future product to be. Next, you need to cut out several small round pieces that will serve as the center.

Next you need to prepare the beams from wooden skewers. Measure the required length and cut the rays using a knife.

The ends of the beams need to be sharpened so that they resemble the beams of a real steering wheel.

The place where the ray will touch the main rim also needs to be sharpened a little so that the ray fits well. Well, then let’s start assembling the product:

Cover the top with another cardboard circle and secure it well with glue. Next you need to do the same with the outer rim:

To make the edge of the steering wheel as neat as possible, you need to sand it with fine-grained sandpaper.

Next, you need to wind a thread around the ends of the rays to give them volume. Now all that remains is to decorate the product with paints and you can decorate the room or play. Such a steering wheel can also become part of the composition and act as a cart wheel:

About floating anchors

A drogue does not hold the ship in place. He holds it with his nose against the wave or current. In fleets, standard floating anchors are rarely used, except on expedition ships. Probably from a sailor's superstition: during a voyage or voyage (if the ship is a military one), the sea anchor is most often thrown out when it is time to give an SOS. Any floating anchor operates on the principle of a parachute.

However, in amateur fishing, floating anchors find quite utilitarian use. Some species of fish swim downstream in a school to feed, and then leave the core and return to their original position. It is clear that by staying in a boat above the school, you can expect a larger catch.

It is very easy to make a fishing anchor for a PVC boat from 4-5 2 liter PET bottles, holding them in a row with tape. Then the ends of a nylon cord are tied to the necks of the outer bottles, a loop of it is tied behind the bottoms and tied with the same tape. The rope from the boat is tied to a loop of the cord. So it is necessary that the bottles meet the flow of the current with the most streamlined surface, and rely on the thrust from the boat to rest against the least streamlined water, as befits a parachute. Setting up such a sea anchor for almost any boat is also easy: to do this, the bottles are partially filled with water or sand.

Accent on wood

Wooden bikes are distinguished not only by their unique attractive design, but also by their practicality due to the properties of wood:

material strength;
elasticity;
ease of processing;
vibration absorption, resulting in smooth running.

Manufacturers often use layering technology to create a flexible molded form that creates a solid frame, which adds strength. And they also often combine wood with carbon fiber to ensure the lightness of the product. The finished frame is treated with impregnations against moisture and decay, which ensures the product’s resistance to environmental influences.

The most common tree species used in production: ash, maple, birch, beech, oak, cedar, walnut, sandalwood and other varieties of mahogany. Another material worthy of attention is bamboo. It is, of course, not a tree, but it is not inferior in strength.

master class with photos and videos

The helm always evokes thoughts of travel and adventure. The most interesting thing is that you can do it yourself. Depending on the chosen material, it can be a toy or interior decoration, if it is made of plywood or wood, mastic or cardboard, or even coffee beans and candies. Today's master class will tell you in detail how to make a ship's steering wheel.

How to make a ship's steering wheel out of wood with your own hands

We will need: – Thin long slats. - Hot water. - Wooden cylinder. – Knitting sticks made of wood. To create a circle, we take thin and long slats, which need to be shaped into a circle. To bend them, we fill a bath of hot water, lower the slats into it, then fix them in the desired position using a press and leave until completely dry. The slats located closer to the central part must be twisted into rings more tightly. When creating a circle, you need to coat all tiers with glue. The twisting method is convenient because the circle will ultimately be stronger, and simply making a circle from a board will not give the desired effect. For the central part, take a low cylinder and make 6-8 holes in it for stick-knitting needles. After preparing all the parts, you need to combine them. To do this, we stick the knitting sticks into the circle in the center, simultaneously passing them through the hoop, and only then fasten them together. We attach the handles to the knitting sticks to make the steering wheel look more natural.

Ship's steering wheel made of chocolate mastic

Such products can be made to decorate, for example, a cake. The steering wheel is made from mastic, the handles can be made from pieces of spaghetti. The steering wheel itself is made of mastic ribbons. Recently, handmade crafts have become very popular. These also include candy bouquets. These are not just bouquets made from sweets, but very interesting crafts that look like beautiful compositions. For example, you can make a candy bouquet in the shape of a ship's steering wheel. The basis for such crafts is most often made of thick cardboard so that the structure is durable. Then this base is masked with corrugated paper and only then candies and other details are attached on top of it.

Steering wheel-topiary made of coffee beans

This is a beautiful product for interior decoration; it also emits a pleasant coffee aroma. We will need: – Thick paper. - Paper tape. – Stick for the stem. - Napkins. - PVA. – Brown paint. - Tape. - Coffee beans. To begin, take cardboard and cut out a couple of identical templates. Now we glue a stick to one of the templates. Next, taking masking tape, we begin to roll an oval out of it, this is necessary to give volume to the product. Glue these rollers onto the first template. Next, glue the second part of the workpiece on top of the pasted tape. Now we cover the resulting part evenly with napkins, as in the papier-mâché technique. The glue can be diluted with water. Now we leave our craft until completely dry. When the base of the future steering wheel has dried, paint it with dark brown paint. As a topiary decoration, you can glue a string to create a nautical style and hang a small lifebuoy on it. Now you can paste over the topiary with coffee beans. And we cover the stick-stem with tape. At this stage, the topiary steering wheel is ready!

How to make a ship's steering wheel from cardboard with your own hands

You can make a steering wheel in another way - using cardboard. This craft is perfect for children's games. It is done very simply. We will need: – Bulk corrugated cardboard. – PVA glue – Scissors – Compass or other round object for drawing a circle. - Regular ruler.

Using a compass, draw two large circles - this will be the rim. Now we cut out a couple more circles, but without holes in the center. As additional details, you can cut out a couple more small circles of different sizes to give the product volume. Let's make another element with knitting needles. Now, using PVA glue, we combine the parts into a single product and we get an excellent toy in a marine style. To avoid deformation of the circles due to the distance between them, you need to glue additional cardboard inserts between the parts around the perimeter. Now the cardboard steering wheel is ready! Happy creativity!

How to draw steam with a pencil step by step

Step one. Draw the body of the ferry and the water line with straight lines. Step two. We add a deck to our ferry, all sorts of antennas and gadgets. We complete the lines of the body so that they stand out more clearly. Step three. Somewhere on the horizon we draw the earth, insert a pipe for the exhaust for our ferry, draw lines for the windows. Step four. All that remains is to complete the windows in the already marked places, make some adjustments to the structure of the ship and its appearance, and, voila, the ferry is afloat. Take the helm, captain, we have a long journey ahead in the world of creativity! Step five. If you're knee-deep in the sea, try these lessons as well. On the pages of the site, you can always download various drawings for free and keep your children busy with them. A ship's helm, like a sea souvenir, is offered on the Internet from 1,900 rubles to 20,000 and above. You can save this amount and get the steering wheel absolutely free. All you need to do is download a ready-made one, cut it out of paper. And then, having chosen a place for it in your apartment or office, walk through it. We have already written about production. Why is the ship's naval helm so fashionable now? Firstly, a marine theme is always romantic. Secondly, the ship's wheel reminds of the sea and the ship, of pirates and adventures. And the ship, long journeys, the dream of all boys and girls. Immediately, I remember books that I remember from childhood: “The Fifteen-Year-Old Captain,” “The Life and Amazing Adventures of Robinson Crusoe,” “The Children of Captain Grant,” “The Two Captains,” “The Odyssey of Captain Blood,” and others. In general, the naval helm is a symbol of great achievements and discoveries. And it can become an original decoration for your interior, be it an apartment or an office, a restaurant or a hotel. What if you cut out a stencil and stick it on a hard surface, and then varnish it. You will receive a real naval steering wheel, a priceless gift for your son or grandson. Are you interested in the topic of stencils? Subscribe to our free newsletter! And you can always follow the updates happening on our website. You will be the first to see new stencils, which will be constantly updated. We will help bring all your creative ideas to life. If you find it difficult to cut out a stencil yourself, then in the near future we are planning to produce and sell stencils on various themes. So, you won't have to cut them yourself. In the meantime, subscribe to the newsletter and follow our news. If you closed your subscription in the pop-up window, simply refresh the page. And don't forget

participation in the mailing list. To do this, click on the ACTIVATION LINK.

You will receive it along with our letter.

Anchor as wall decor

People began to conquer the seas from time immemorial, and it is noteworthy that the anchor in the version to which we are accustomed now appeared only in the Middle Ages, while the anchor rod was most often made of wood and had straight “horns” - a transverse solid bar at the top parts of the structure. Over time, by the way, they abandoned it - too often these same “horns” led to accidents.

How to make an anchor as a wall decoration - master class from gina-michele