Master class on making a children's toy “Octopus and Goldfish”. Kindergarten teachers, school teachers and educators

DIY octopus from a glove

Surely every home has a box or drawer for old, no longer needed things. With a little imagination, you can make a toy out of them. For example, sew a funny craft, a small octopus from a glove with your own hands.

To work you will need:

— Glove; — Cotton wool or padding polyester for stuffing; — A pair of buttons for the eyes; — Threads; - Needle; - Scissors; - A stick or pencil.

First, fill the glove with cotton wool or padding polyester using a stick. Try to push the cotton all the way to the tip of your finger, otherwise your octopus from the glove will end up with problems standing on its legs. Also try to distribute the stuffing evenly to avoid lumps and leave no voids.

Then we stitch the glove along the edge with the seam forward and the needle, retreating about 1-1.5 cm. If the upper part has a thick, dense elastic band, then we make the seam below it.

We tuck the upper part of the glove, hiding the elastic inside.

Tighten the thread so that there is no hole left. To prevent the neck from coming apart, we make 2-3 stitches on top of the tie.

And in order for our octopus to stand on its legs, we tighten the space between the thumb and little finger using a hidden seam.

This is what we ended up with.

After making the figurine, we proceed to the most important stage - designing the toy. Here you can use your imagination. For example, make a boy or a girl octopus. We're having a girl. Sew on button eyes.

You can use wool threads to make hair and embroider a mouth. And finally - small bright bows made of satin ribbon.

This is such a funny toy we got!

This toy, sewn by mother's hands, will surely please your baby. Just don’t forget to sew the buttons on tighter if your child is of kindergarten age. And for very young children, it is better to embroider the eyes with colored threads.

Octopus craft with threads

Octopus made of threads - a model for children aged 4-5 years. Very simple and decorative! And you can play with such a craft. By weaving “legs” for an octopus from threads, it is very convenient and fun to learn how to braid. By the way, modern biologists believe that an octopus has only two “legs,” and the remaining six tentacle limbs are “arms.” And these hands are absolutely amazing! Each tentacle has two rows of suckers. They allow the octopus to climb steep cliffs and even walk “on the ceiling” in underwater caves. But that is not all! Thanks to the suction cups, the octopus “tastes” everything it touches. After all, there are taste buds in the suction cups - like on the human tongue - that allow you to understand whether something is edible or not.

The color of the thread for our octopus can be any. Moreover, in nature, these inhabitants of the deep sea can change their color - for camouflage or according to their mood. So, a calm octopus is brown; if it is scared, it turns white, and if it gets angry, it turns red.

For a thread octopus you will need:

Wool threads for octopus
A piece of padding polyester or rags
Contrasting color threads for tying

We wind the threads on rectangular thick cardboard or just a book.

We remove the threads from the book and tie it with a thread of a contrasting color, stepping back about 2 cm from the edge. To be more careful, you can insert, for example, a ruler into the resulting loop. Next, cut the loop.

We form the head of an octopus. We insert a piece of padding polyester between the threads, carefully straighten the threads so that the padding polyester is not visible.

We tie a ball under the head with a thread of the main color.

Making legs for an octopus. We distribute the threads into 8 parts. Take 1/8 of the thread and braid it, tying it at the bottom with a thread of a contrasting color. To keep the rest of the threads out of the way, you can put a piece of cardboard between the threads you are currently working with and the rest.

We make the octopus's face. The eyes can be sewn on ready-made, or you can glue cut ones from felt or embroider them with suitable threads. We cut out the mouth from felt and glue it with universal glue, or you can also embroider it with red thread.

The thread octopus is ready.

You can also make dolls - Martinicheks - from threads.

Source

Octopus brain controls eight arms

Octopus tentacles are not meaningless appendages. Under the control of the central nervous system, the octopus takes the bait out of the maze with its favorite “hand,” zoologists have shown.

Octopuses are one of the most highly organized groups of invertebrates. Therefore, scientists are studying their behavior with great interest. A group of zoologists led by Dr. Tamar Gutnick from the Hebrew University of Jerusalem found that the common octopus is able to control the movement of its eight “arms” using the central nervous system.

Of the eight “hands” one is the favorite

It has always been believed that octopuses move their soft tentacles completely randomly. Recently, biologists from the Weymouth Marine Center (UK) showed that the octopus’s brain only signals the limbs to begin movement. And then each limb acts independently. Moreover, even the octopus’ “arms” cut off from the body continue to make programmed movements for some time. But Gutnik’s experiment proved that the movements of octopus tentacles are coordinated by the central nervous system, and on the basis of visual information.

Gutnik conducted the following experiment: she constructed a transparent labyrinth with three sections, in the central section there was food - bait. The octopuses were allowed into the maze one by one and their actions were observed. During the experiment, six out of seven animals learned to lower the same “hand” into the central section of the maze and retrieve the bait from there. Moreover, the experimental octopuses could repeat these actions several times with the same selected limb.

“Our experiment showed that the octopus sees the bait, and then the central nervous system sends a signal to the limbs. This means that, based on visual information, the octopus makes conscious and well-coordinated movements of its limbs,” Gutnik sums up his work.

Highly organized cephalopods

Octopuses belong to the class of cephalopods. They have eight tentacles covered with many suckers. Each tentacle contains taste buds that determine whether food is edible. Octopuses do not have a hard skeleton. And the head, compared to the body, is large in size. The cartilaginous skull protects the octopus's brain, which even has a rudimentary cortex. Octopuses have excellent vision - they look at the world with the help of square pupils. Recently, Taiwanese scientists managed to prove that octopuses also hear perfectly.

You can read more about the experiment by Dr. Gutnick and her colleagues in an article published in the journal Current Biology.

Very simple

Even the smallest craftsman can easily make this toy. Give your baby a handkerchief or a square piece of fabric, slightly cut on the sides (as in the photo), and a small ball made of anything: fabric, foam rubber, crumpled newspaper, a ball, and so on. Let the child throw a rag over the ball and tie a ribbon around the octopus’ “neck”. Draw the eyes or glue them together.

Required:

two old socks, maybe different ones;
any filler;
wooden knitting needle;
scissors;
threads, needle;
felt-tip pen.

Master class on making an octopus from socks

Take two socks and draw lines for future cuts on them. From the toe to the middle of the foot, one of the socks will represent the head of the toy. From the heel to the elastic, we divide each sock into 4 parts lengthwise. These will be the tentacles.

We cut out the details of the toy.

We sew the legs, leaving them unstitched on one side, and turn them inside out.

Using a wooden knitting needle, fill all the parts with padding polyester. Carefully sew up all the holes.

We sew the tentacles to the head and tighten the “neck”. Let's draw a face. The toy is ready.

This version of the sea mollusk involves both 4 legs and 8. It all depends on how many gloves you don’t mind using in your work. Moreover, the gloves do not have to be the same.

Hide one thumb inside and carefully sew up the mark from it. Wrap the elastic band inside. Fill the remaining 4 fingers and the glove with filler and sew the top closed. To be more convincing, you can pull the glove a little at the base of the fingers. Sew button eyes and mark a mouth. The four-legged octopus is ready.

The toy made from two gloves is a little more complicated. We also remove one thumb inside and mask its presence. We make an incision at the base of the fingers in a fingerless glove and insert another one inside it, leaving 4 fingers “outside”. We fill all 8 fingers with padding polyester, stitch them at the base, while simultaneously closing the slot. We fill the double glove with filler, first tucking the elastic. We sew up and shape the face.

Popular articles Cool wishes for Maslenitsa in verse, SMS and prose

Doctor Otto Gunther Octavius, a supervillain, star of comics, cartoons and television series, has recently become our children's favorite toy. The doctor has his own biography, his personal and public life. It's difficult to do, but possible. We offer several options.

A Lego villain doctor, like the one in the photo.
Doctor Octopus from an ordinary doll with four tentacles glued to the back from scrap materials: polymer clay, boiler tubes, wire wrapped in threads, etc.

An octopus made from strips of paper will add to the collection of crafts made using this popular technique. The work is very simple, perfect for children, but will require diligence and accuracy.

Materials you will need:

Double-sided orange colored cardboard;
A little white paper for the eyes or ready-made moving eyes;
Ruler, pencil, scissors, glue stick, compass, black felt-tip pen.

Master class on making a children's toy “Octopus and Goldfish”

Tatyana Koksheneva

Master class on making a children's toy “Octopus and Goldfish”

The most ordinary threads can become a bright and interesting material for creating children's crafts . With their help, using various techniques and techniques, you can create beautiful paintings, toys , postcards. The history of thread dolls goes back to ancient times. For many peoples of the world, dolls were not so much children's toys , but rather obligatory objects for the performance of certain rituals. Small toys made of bright threads can be an excellent gift for the upcoming holiday for your loved ones. Their production makes it possible to have a good time with friends and comrades and do interesting and useful things.

It's no secret that the development of children's fingers - fine motor skills of children's hands - contributes to the development of the baby's speech and intelligence. One way to develop fine motor skills is through creativity. Drawing, modeling, appliques and creating all kinds of crafts will help your child develop his imagination, perseverance, accuracy, and of course fine motor skills. An octopus and a goldfish made from threads and glue is a simple and interesting craft that you can easily make with your child, and even introduce your child personally to the main character of the fairy tale “ Goldfish ”

We made these with older children for kids on the eve of the holidays: octopuses for boys , and goldfish for girls .

Dare, fantasize and the joy of creativity will definitely come to you!

MATERIALS AND TOOLS REQUIRED:

- skeins of thread of different colors;

- black and white cardboard;

- scissors;

- PVA glue.

1. Threads (in our case blue)

wrap onto a suitable backing of the required size.

2. On one side, tightly tie the winding with a thread of a contrasting color.

3. Carefully remove the winding from the warp, fold it in half and, stepping back a little from the edge, tie the skein tightly. We got the head of an octopus . Carefully cut the skein of thread on the opposite side. octopus legs here .

4. Divide all the threads into 8-9 parts - the number of octopus . Weave a braid from the threads of each leg and tie tightly at the end with a contrasting thread.

5. Carefully trim the threads on each braid leg. Tie bows at the ends of the legs.

6. Make a solid winding using red and yellow threads to make a goldfish .

7. Carefully cut the skein of yellow thread on one side. Tie a skein of red thread on one side and cut it on the other. Place a bunch of red threads on the laid out bunch of yellow threads.

8. Tie both bundles tightly with red thread where the red bundle is tied. Fold the threads so that the red ones are inside the bundle, and, stepping back from the edge, tie the entire skein, separating the fish's .

9. Divide the yellow threads into three parts and the red ones into four.

10. Weave a braid from the upper central part of the red threads. This will be the upper middle fin. Place the threads of the fish's together and tie them, grabbing the tip of the upper fin-pigtail.

11. Having determined the length of the side fins - the side parts of the red threads, tie them up and cut off the excess.

12. Cut out small circles from white and black cardboard to make eyes for the octopus and fish .

13. Glue the eyes to the octopus : white circles first, and black ones on top.

14. Cut out a small triangle from black cardboard and fold it in half.

15. Glue the finished beak to the octopus .

16. Glue the eyes of the goldfish on the sides , distribute the threads of its tail evenly so that the red threads are visible. If necessary, trim the ends of the tail threads.

toys might look like .

Good luck. Try it, you won’t regret it, the kids loved it!

Very simple

Required:

two old socks, maybe different ones;
any filler;
wooden knitting needle;
scissors;
threads, needle;
felt-tip pen.

Master class on making an octopus from socks

We cut out the details of the toy.

We sew the legs, leaving them unstitched on one side, and turn them inside out.

Using a wooden knitting needle, fill all the parts with padding polyester. Carefully sew up all the holes.

We sew the tentacles to the head and tighten the “neck”. Let's draw a face. The toy is ready.

This version of the sea mollusk involves both 4 legs and 8. It all depends on how many gloves you don’t mind using in your work. Moreover, the gloves do not have to be the same.

A Lego villain doctor, like the one in the photo.
Doctor Octopus from an ordinary doll with four tentacles glued to the back from scrap materials: polymer clay, boiler tubes, wire wrapped in threads, etc.

Sock octopus

Required:

two old socks, maybe different ones;
any filler;
wooden knitting needle;
scissors;
threads, needle;
felt-tip pen.

Master class on making an octopus from socks

We cut out the details of the toy.

We sew the legs, leaving them unstitched on one side, and turn them inside out.

Using a wooden knitting needle, fill all the parts with padding polyester. Carefully sew up all the holes.

We sew the tentacles to the head and tighten the “neck”. Let's draw a face. The toy is ready.

Cutting and sewing

Using the pattern of the cap wedge, you should cut out 6 parts of the octopus’s body from knitwear. Seam allowances should be as follows:

along the side sections – 5-7 mm;
along the bottom cut - 1 cm.

All 6 parts must be duplicated on the wrong side with an adhesive lining on a knitted base.

Then any 2 parts of the body must be sewn together along the side sections with a seam 5-7 mm wide (depending on the processing allowance). The parts should face each other, and the seam itself should be laid along the wrong side of the parts.

For ease of stitching, the parts can be pinned or basted with hand stitches.

After this, the seam allowances must be laid out in opposite directions and set aside at a distance of 1 mm from the seam.

The third part should be sewn and delayed in the same way.

The two halves of the body must be sewn together, as shown in the photo.

Then you need to cut out 12 tentacle parts (2 for each) from knitwear. Their length and width can be arbitrary. The approximate length can vary from 50 to 60 cm, the width at the widest point is 6 cm, at the narrowest point - 3-4 cm, you also need to add a processing allowance - 7 mm..

6 parts of the tentacles should be duplicated with an adhesive pad.

All parts of the tentacles need to be pinned together in pairs, one part duplicated, the other not, face to face, and stitched around the perimeter at a distance of 7 mm from the cuts.

After stitching, the allowance at the end of the tentacle should be trimmed to a width of 3 mm, so the part will be easier to turn out and will look beautiful when finished.

The prepared tentacles must be turned right side out.

Each tentacle should be loosely filled with holofiber. Due to the fact that one part of the tentacle is duplicated and the other is not, the stuffing will pull the latter more strongly. As a result, the tentacle will have a slightly curved shape, which will allow the octopus to look more realistic.

From white and black felt you need to cut out the details of the octopus's eyes. They can have any shape. They need to be sewn onto the body.

In the middle of each of the 6 wedges (along the lower cut) you should sweep the tentacles of an octopus.

After this, you need to cut out the lower part of the octopus’s body from knitwear - a circle. Its diameter can be calculated based on the circumference formed by the width of the lower parts of the wedges (circumference formula).

The allowance for sewing the circle to the body should be 1 cm.

This part should be manually basted around the entire perimeter onto a layer of thin padding polyester, which will give it rigidity.

Then approximately the length of the workpiece should be sewn to the body of the octopus. Through the unsewn hole, the toy must be turned right side out.

Even a child of five to eight years old can make this toy with his own hands, if, of course, you show him how to do it and give him the material. Moreover, a soft toy octopus is recognizable in any form, if it has a head with eyes and as many legs as desired.

For beginners

The model is based on the basic “Bird” shape. This option is suitable for decorating a postcard or picture with a “marine” theme. If you still have little experience in origami, it is most convenient to fold the octopus according to this pattern.

To make the required number of “legs”, they resort to cutting some parts. The size of the initial square can be 8x8, 10x10 or 15x15 cm.

Step-by-step instruction:

Place the square with the white side up.
Bend diagonally from top to bottom.
By bending the resulting triangle, we outline the height. We open the left side from the inside and flatten it to the right.
Turn the workpiece over.
Repeat step 3 on the back.
In the first layer we make three folds along the dotted lines. Let's reveal them. Similarly, we outline the fold lines on the back.
Open the first layer by lifting the bottom point. Repeat the action on the reverse side of the figure.
We lower the top half of the diamond.
Fold the first layer along the dotted line.
Cut the bottom of the product along the blue line.
Make a zigzag fold in the first layer.
We bend the forked part of the first layer at an angle.
We repeat the same with the next one.
Each time we lower the fold line a little so that all the paws are visible.
We move the last row to the sides quite a bit.
We bend the top of the figure.

We glue the eyes of the origami octopus and complete the assembly process. You can bend the legs to the sides more, then the figure will take a slightly different look. Such models are suitable as stands for banquet cards. An original idea for a party in a nautical style.

From threads

The same charming octopus with pigtails can be made from thick threads. It is better to use synthetic yarn or cotton with synthetics. It holds its shape and volume perfectly. The technique for making the toy is shown in the video.

A few additional tips

Instead of a lump of newspaper, you can use a plasticine ball or Kinder Surprise packaging.

To prevent the threads from coming apart on the octopus’s head, you can lightly grease the filler with PVA glue.
To accurately calculate the number of legs, you can do a simple multiplication of 15 cm (length of the octopus) x 3 (number of threads in a strand) x 3 (number of strands in a braid) x 8 (number of braids) = 1080 cm. This means we take a bundle of 9 threads 120 cm and fold it in half three times.

Origami from modules

Korean artist Nga Tran proposes making a spectacular octopus using modular origami technique. Despite its impressive appearance, the model will not present any difficulties during assembly. You will need 1012 solid-color modules, 1/36 in size, PVA glue, and plastic toy eyes to complete the look.

Octopus made from strips of paper step by step

Cut out a circle of any size from orange cardstock. What the octopus will be like depends on its size. Don't make it very small, as it will be difficult to glue the strips of paper later. Also, the sizes should depend on the age of the child; the smaller the children, the larger the circle.

In addition to the circle, cut 8 strips for the tentacles, about 1.2 cm wide. Place the strips together and round everything at once on one edge.

Glue the tentacles along the edges of the circle to form something like rays.

Now cut 8 more long strips, 1 cm wide and twice the length of the circle.

Place them together and bend a couple of centimeters on both sides. This will be the area to glue to the circle.

Glue the first strip, fitting the folded sides to the edges of the circle. It should look like an arch.

Glue the next strip across the first.

Glue all the strips in this way, filling the spaces between the previous ones.

Octopus made from strips of paper is almost ready. Make paper eyes by cutting out small white circles and drawing black pupils on them with a felt-tip pen. Glue the resulting eyes onto the octopus's body and twist all the tentacles upward. This is how another character for the collection turned out.

What to do with a two and a half year old baby on a rainy summer day? Let's meet the octopus. Our baby doesn’t know such an animal yet.

First, let's look at his “portrait”, where he lives and gets along, watch a cartoon about naughty octopuses and get down to business.

Colored paper, glue (PVA or glue stick), felt-tip pens, glue and 15-20 minutes of free time - this is enough to make a beautiful and voluminous octopus. This craft can be used as an independent toy. Alternatively, colorful octopuses can be useful for a small theatrical performance.

You don’t need to think that a 2.5 year old child made the craft on his own. For him, this is an option to get acquainted with something new through different types of activities: a picture, a cartoon, a craft. He took an active, very active part: he drew “Velcro” on the tentacles, tried to cut paper, and smeared glue on the octopus. Almost correctly (vasinog) learned the name of the beast.

An older child (4-5) can make a craft with a little help, and six or seven year olds can do it on their own. But watching a cartoon and learning poetry is useful for everyone.

Popular model from Lee Armstrong

A British origamist has developed a diagram of a realistic octopus, which can be made in several versions. The figurine is inflatable and gains volume under the influence of air. It is better to use thin but durable paper for it, since it will be folded in several layers. The minimum size of the initial square is 21x21 cm. Otherwise, difficulties will arise with small details, especially for beginners.

Step-by-step instruction:

We make two folds in half in both directions “valley”. And then diagonally “mountain”.
Bend the corners towards the center to make a “Pancake”.
Now we fold the workpiece into a “Double Square”.
We unfold the product with the free edge towards us. Fold the right and left corners to the central axis. Let's reveal. Repeat the same step on the back.
We make mountain folds along the marked lines.
We move the top points apart. We repeat the action on the reverse side.
We “push” the side valves inward.
We make folds along the indicated dotted lines.
This is what should happen. Repeat step 8 on the back.
We outline the fold lines.
Fold the right and left edges to the center line. Let's reveal.
Now bend the edges to the lines from step 11.
Make reverse folds following the arrows.
Repeat steps 10 – 12 on all valves.
We complete step 13. Move one layer to the left. And we do the same on the back.
We bend the figure along the dotted line.

Return the first layer to the right. We do the same on the other side.
Fold the top corners diagonally.
Bend both halves of the first layer back.
Raise the lowest point.
We make a “bunny ear” fold, outlining the first tentacle.
We turn the valve inward.
Repeat steps 22 – 23 on the reverse side.
This is what should happen.
We make eyes by opening and flattening the side flaps.
The head is ready.
We make the remaining tentacles following the example of the first two.

We bend the top of the figure forward and back.
Press along the arrow to create a diamond fold.
We blow from below, giving the figure volume.
We curl the tentacles onto a pencil or bamboo skewer.

A slightly different option:

The model can be used for paper jewelry that is fashionable today:

From a glove

This version of the sea mollusk involves both 4 legs and 8. It all depends on how many gloves you don’t mind using in your work. Moreover, the gloves do not have to be the same.

Materials

All the materials needed to make an octopus costume can most likely be found at home. As a last resort, they can be easily and inexpensively purchased at a store like “Funny Prices” or Fix Price near you.

So, we will need:

4 pairs of tights;
belt, belt, ribbon or at least rope;
T-shirt with long sleeves;
cap;
pieces of felt or other fabric in black and white;
pins (preferably safe English ones);
lots and lots of padding polyester or cotton wool.

Poems about octopuses

With older children 2.5 it is useful to learn poetry. Unfortunately, I couldn’t find any poems that our hero could understand. Well, maybe the first one will do. The first two lines.

***

I'm a huge octopus! I have eight legs! I can dance... And step on feet... But try to step on so many feet yourself! (T. Sofinskaya)

***

The octopus was surprised: “Why do I need eight legs?!” Answer quickly, children, Why do I need these shoots? The children answered in chorus: “There are sharks in these waters.” To escape you need eight legs at once! (V. Trusov)

***

An octopus has eight legs... Is it a little or a lot? – Eight legs are an awful lot! - This is how the lamprey would answer, Because lampreys have absolutely no legs... Eight legs are insignificant! - So the centipede would answer, Because centipedes, As you know, have many legs... And ask the octopus: - Eight - few or many? And he will answer immediately: “Eight is just right!” (In Voskoboynikov)

DIY thread octopus: materials

yarn (the thicker, the more voluminous the toy will be)
simple thin threads
soft filler (cotton wool, padding polyester, holofiber)
scissors
decorative details

Choose the decor at your discretion. For example, we decorated the tops of our octopuses with satin bows. And you can easily put miniature hats on their heads in the style of Charlie Chaplin :-) Turn to the rich children's imagination for creativity!

How to make an octopus from threads?

STEP 1. Form a ball from the filler - this is the future head. The size of the workpiece depends only on what size toy you want to get.

Cut 24 threads of the same length from a skein of yarn (it also depends on the desired size of the octopus). There can be 48 or 72 pieces, if your yarn is thin and you have to braid the braids in two or three threads.

STEP 2. Drag the entire bun in the middle with a thin thread (this is the top of the octopus). “Hide” a ball of filler under the yarn; From below, secure the head of the toy with thread.

STEP 3. How to get only 8 out of 24 “tentacles”? A problem on the verge of mathematics and handicrafts! But it can be solved quickly: braid three threads into braids (6 or 9, respectively, if there are 48 or 72 threads in the bundle), and tie knots at the ends.

STEP 4. All that remains is to decorate the resulting octopus. Our guys have eyes and mouths made of ordinary paper. Perhaps yours will have them embroidered with beads? Imagine!

But what a family of octopuses Tatyana Falina sent us to the editorial office! You can also send photos of your crafts made using our master classes to the editor. We will be happy to publish them on the site!

Is the simplicity of the craft impressive? Be sure to try making an octopus made from knitting threads with your child!

We will need:

a square piece of plain fabric, preferably one so that its raw edges do not fray: fleece, thin felt, drape, and so on;
a small ball, a ball, a ball of unnecessary thread or a piece of foam rubber to fill the head;
scissors;
beautiful thin braid;
"eyes";
small scarf made of colored fabric.

Sequence of work

Put the “brains” back into the octopus and tighten the “neck” with a strong thread. You can tie a scarf or bow tie.

Use scissors to straighten the fringe.

Make tight braids, tying them with a bow at the end.

Glue or sew on the “eyes”, draw a smile with a felt-tip pen and tie a scarf.

Bookmark

Children aged 5 - 7 years are unlikely to be able to make an origami octopus according to Lee Armstrong's scheme. But they will fold a bookmark for their favorite book easily and with pleasure. Once you add a tentacle to an ordinary origami corner, it will turn into a funny octopus lurking on the page.

Step-by-step instruction:

We place a 15x15 cm square with the wrong side up and bend it diagonally. We lower the top of the triangle to the base. We work only with the first layer.
Fold the right corner towards the middle.
We do the same with the left one.
Open the folds from steps 2 and 3.

Raise both corners to the top.
We fold them along the fold lines from steps 2 and 3. .
The corner is ready.
Cut out the tentacles. To do this, fold a separate sheet of paper in half, the width of which is equal to the base of the corner bookmark.

We cut the tentacle blanks in half. We draw suction cups with a felt-tip pen. Then we glue the tentacles to the inside of the corner bookmark. We try to place them at different angles, as if the mollusk was swimming.

Octopus

We will need:

a square piece of plain fabric, preferably one so that its raw edges do not fray: fleece, thin felt, drape, and so on;
a small ball, a ball, a ball of unnecessary thread or a piece of foam rubber to fill the head;
scissors;
beautiful thin braid;
"eyes";
small scarf made of colored fabric.

Sequence of work

Put the “brains” back into the octopus and tighten the “neck” with a strong thread. You can tie a scarf or bow tie.

Use scissors to straighten the fringe.

Make tight braids, tying them with a bow at the end.

Glue or sew on the “eyes”, draw a smile with a felt-tip pen and tie a scarf.

DIY octopus from a glove

Octopus craft with threads

Octopus brain controls eight arms

Of the eight “hands” one is the favorite

Highly organized cephalopods

Very simple

Master class on making a children's toy “Octopus and Goldfish”

Very simple

Sock octopus

Cutting and sewing

For beginners

From threads

Origami from modules

Categories

Octopus made from strips of paper step by step

Popular model from Lee Armstrong

From a glove

Materials

Poems about octopuses

DIY thread octopus: materials

How to make an octopus from threads?

Bookmark

Octopus