Do-it-yourself mouse pad at home: from scrap materials, what to replace it with

A mouse stand is not just an accessory, but a necessary thing that makes your work easier. And although there is a sufficient selection of different models in stores, it is quite possible to make a rug yourself. And such a stand will have a lot of advantages: it fits perfectly in size, is pleasing to the eye, and, finally, it’s just nice that you made a creative and useful thing with your own hands.

A computer mouse is an important accessory for any computer user, and making your own mouse pad can be quite a fun activity.

Linoleum rug

It can be easily made, because after the renovation there were probably pieces of unnecessary material left in the house - give it a new life. It is enough to cut a piece measuring 21x25 cm and carefully round the edges. To do this, you can use a round object: a glass or tape, circle it with a pencil and remove the excess. The homemade rug is ready, but you can decorate it if you are not satisfied with the appearance.

A piece of flooring will help you create an alternative to a rug at home.

Important! To avoid unnecessary bends, you can iron a piece of linoleum through thick fabric so that it lies as evenly as possible on the table surface. Due to the fact that it consists of several layers, there is no need to additionally glue it from below, because such a carpet will not slide much on the table. This is one of the simplest options, because it only requires cutting and decoration.

ROOM

OPTIONAL RESEARCH RESULTS. RESULTS OPTIONS ¿ÐµÑÐ²Ð¾Ð ·Ð´Ð°Ð½Ð½ÑÐ¹ Ð²Ð¸Ð´.

Cardboard mat

This material can be found in any home; cut out a piece from an unnecessary corrugated box and, to prevent it from sliding on the table, glue fabric to the bottom or use anti-slip furniture impregnation. For external decor, you can also use a piece of beautiful fabric or print a picture that can be covered with a transparent self-adhesive film. Or buy a self-adhesive sticker with a pattern.

To prevent the cardboard surface from looking dull, use craft paper or wrapping paper with an interesting print.

You can also use special tape, stickers, and drawings for decoration. To ensure that it lasts a long time and the decorative surface is not damaged, use transparent film. You can take leftover packaging film or gift bags, which are cut to the shape of the product and glued on top of it. A stylish and original solution will help you make a personal mouse pad and give a second life to things.

We fix it on top with self-adhesive film. As you work, smooth the film well so that there are no folds or bubbles.

What's wrong?

RESULTS the ¼ÐµÐ½Ð½ÑÑ Ð¿Ð¾Ð´ Ð»Ð¾Ð¶ÐºÑ ÑÐ°Ð¼Ð¾ÑÑÐ¾ÑÑÐµÐ»ÑÐ½Ð¾. RESPONSIBILITY:

CONDITION 96 REPORT, REPORT ºÐ¸ÑÐ¾Ð²Ð°Ð½Ð½ÑÑ Ð¾Ð±Ð»Ð¾Ð¶ÐºÑ;
RESEARCH;
ÑÐ¾Ð½ÐºÑÑ ÐºÐ½Ð¸Ð³Ñ Ð² ÑÐ²ÐµÑÐ´Ð¾Ð¼ Ð¿ÐµÑÐµÐ¿Ð»ÐµÑÐµ;
regurgitation;
Ð¶ÑÑÐ½Ð°Ð", Ð¾Ð±Ð»Ð°ÑÐµÐ½Ð½ÑÐ¹ Ð² ÑÐ°Ð¹Ð»Ð¸Ðº.

From a paper clipboard

This is a ready-made part that does not need to be cut, it only needs external decoration. To do this, you first need to attach a black sheet of paper so that there are no glares, and then white on top of the black and you can decorate. The rug should be moderately smooth; if the lower part is too slippery, you can sheathe it or cover it with fabric. Please note that tablets come in both small and large sizes.

Take any paper clipboard and place it on your desktop.

If you order from the Internet or ask someone to buy, then immediately take into account the desired size. If the tablet is sliding on the table, you can glue down pieces of felt or any similar material so that the mat rests securely on the table surface. The clip can be left or removed if desired. With the first option, the decorating process will be quite simple and it will be possible to prepare several options that will change. Also, the tablet can perform its previous functions in its free time from working at the computer.

Be careful not to make the stand too smooth.

ROOM

REPORT 1

RESULTS, ASSURANCE, ASSURANCE, ASSURANCE, ASSURANCE, ASSURANCE, ASSURANCE ROOM RESEARCH SOS. " S. Ð´Ð¸Ð½ Ð¸Ð· Ð½Ð¸Ñ â ÑÑÐ¾ Ð»Ð¸Ð½Ð¾Ð»ÐµÑÐ¼.

RESPONSIBILITY:

regurgitation;
Ð½Ð¾Ð¶Ð½Ð¸ÑÑ;
RESULTS.

RESULTS °ÑÑ Ð¿ÑÑÐ¼Ð¾ÑÐ³Ð¾Ð»ÑÐ½Ð¸Ðº. RESULTS 20 24 24. RESULTS ROOM SS. RESULTS. RESULTS ½ÐµÐ¼Ð½Ð¾Ð³Ð¾ Ð¿Ð¾ÑÐ°Ð½ÑÐ°Ð·Ð¸ÑÐ¾Ð²Ð°ÑÑ.

RESPONSE 2

RESULTS RESEARCH, RESEARCH Ð¸Ð»Ð¸ ÑÐ¾ÑÐ¾Ð³ÑÐ°ÑÐ¸Ð¸. RESULTS µÐ¹ÐºÐ°. RESULTS, RESULTS Ñ Ñ ÑÐ¾Ð²Ð¿°Ð´Ð°ÑÑ Ñ Ñ Ð¾ÑÐ½Ð¾Ð²Ð¾Ð¹ Ð¸Ð· Ð»Ð¸Ð½Ð¾Ð» ÐµÑÐ¼Ð°.

RESULTS Ð½ÐºÑ, ÐµÐ³Ð¾ Ð½ÑÐ¶Ð½Ð¾ Ð·Ð°ÑÐ¾Ð½Ð¸ÑÐ¾Ð²Ð°ÑÑ Ð°ÐºÑÐ¸Ð »Ð¾Ð²Ð¾Ð¹ ÐºÑÐ°ÑÐºÐ¾Ð¹. RESULTS RESULTS Ð½Ñ Ð½ÐµÑ Ð½ÐµÐ¾Ð±ÑÐ¾Ð´Ð¸Ð¼Ð¾ÑÑÐ¸. OPTIONAL RESEARCH ASSURANCE RESEARCH Ñ Ð¿Ð" ÐµÐ½ÐºÐ¸. RESULTS.

Leather rug

An ideal option for a homemade product, because the mouse will glide well on such a surface. You can make a minimalistic home rug by taking pieces of leather and gluing them together, you can sew the edges on a machine or do it by hand, but first mark it with a pencil. Leather can be used from old shoes, jackets, bags, etc.

A homemade leather stand is a very creative thing. Even the simplest model looks stylish.

Note! If the skin is thin, then it is better to glue it to a denser material. It does not have to be decorated, but if desired, you can apply a minimalist design or embroidery. Leather itself looks beautiful and stylish, so the decor does not have to occupy the entire surface. Of course, if the material is already quite old and signs of wear are visible here and there, then it is better to disguise them.

If you have the skills to work with a sewing machine, it is better to sew.

ROOM

ROOM, ROOM ROOM RESULTS This is the case. RESULTS. RESULTS Ñ, ÑÑÐ¾ Ð¸ÑÐºÐ»ÑÑÐ°ÐµÑ ÑÐºÐ¾Ð»ÑÐ¶ÐµÐ½Ð¸Ðµ Ð¿Ð¾ Ð¿Ð¾Ð²ÐµÑÑÐ½Ð¾ÑÑÐ¸. RESULTS ¸ SOSANIA Ð´Ð¾Ð¹ÑÐ ¾ RESEARCH, RESEARCH Ð´ÐµÑ Ð·Ð °Ð²Ð¸ÑÐµÑÑ ÑÑÐ¿ÐµÑ Ð² Ð¸Ð³ÑÐµ.

RESULTS:

— regurgitation;

— Ð½Ð¾Ð¶Ð½Ð¸ÑÑ;

— ÐºÐ°ÑÐ°Ð½Ð´Ð°Ñ, Ð»Ð¸Ð½ÐµÐ¹ÐºÑ;

— Ð¿Ð»ÐµÐ½ÐºÑ-ÑÐ°Ð¼Ð¾ÐºÐ»ÐµÐ¹ÐºÑ Ñ ÑÐ¸ÑÑÐ½ÐºÐ¾Ð¼;

— Ð´Ð²ÑÑÐ¾ÑÐ¾Ð½Ð½Ð¸Ð¹ ÑÐºÐ¾ÑÑÑ.

RESULTS RESULTS. RESULTS, RESULTS ¸ÑÑÑÑ ÐºÐ»Ð°Ð²Ð¸Ð°ÑÑÑÐ° Ð¸ Ð¼ÑÑÐºÐ°. ROOM Ð¼ 30 Ð½Ð° 60 ÑÐ¼. RESEARCH - RESEARCH ASSURANCE, ASSURANCE Ð½ÐµÐ¹ Ð¼Ð¾Ð¶Ð½Ð¾ Ð¿ÑÐ¾Ð¹ÑÐ¸ÑÑ Ð³Ð¾ÑÑÑÐ¸Ð¼ ÑÑÑÐ³Ð¾Ð¼.

RESULTS, RESULTS ³Ð¸ÑÐ¾Ð²Ð°Ð½Ð½Ð¾Ð³Ð¾ Ñ"Ð¾Ñ, Ð¼Ð¾Ð¶Ð½Ð¾ Ð½Ð°Ð½ÐµÑÑÐ¸ ÑÐ°Ð¼Ð¾ÐºÐ"ÐµÑÑÑ ASSESSMENT. RESULTS AND CONNECTIONS Ñ Ðº ÑÑÐ¾Ð»Ñ Ð¿Ð¾ÑÑÐµÐ´ÑÑÐ²Ð¾Ð¼ Ð´Ð²ÑÑÑÐ¾ÑÐ¾Ð½Ð½ÐµÐ³Ð¾ ÑÐºÐ¾ÑÑÐ°. RESULTS, RESULTS ²ÑÐ¸ÐºÐ° Ð´Ð»Ñ Ð¼ÑÑÐ¸, ÑÐ²Ð¾Ð¸Ð¼Ð¸ ÑÑÐºÐ°Ð¼Ð¸ ÑÐ¾Ð·Ð´Ð° registry, regurgitation ASSURANCE WITH ASSURANCE.

Plexiglas mat

Quite a difficult thing to make, but incredibly beautiful. You need to use LEDs, thick paper, glass, wire, superglue, wine cork, USB cable. The first step is to connect the cable to the LEDs and secure them with pliers. The plexiglass is given the shape and size of the mat. The cork will serve as legs, so you need to divide it into 4 even parts and glue the parts to the plexiglass.

Only those who have the skills to work with this material can create a mouse stand from plexiglass.

Here you need to glue the LEDs, and attach thick paper to the outside, cutting out the desired design on it. The result is the perfect gaming mat for a true gamer. With such an accessory, any game will be more enjoyable, and you will be able to feel like a hero from the future.

RESULTS

RESULTS ROOM ASSURANCE, RESULTS RESULTS ¶Ð¸ÑÑ Ð½Ð° Ð½ÐµÐ¹ ÑÐ²ÐµÑÐ¾Ð´Ð¸Ð¾Ð´Ñ, Ð¿ÑÐ¸ÑÐ¾ÐµÐ´ USB port USB port S. RESPONSIBILITY AND RESPONSIBILITY RESULTS Ð¾ÐµÐ¼Ñ ¼Ð°Ð³Ð°Ð·Ð¸ Ð½Ð½Ð¾Ð¼Ñ ÑÐ¾Ð±ÑÐ°ÑÑ.

From ornamental foam

Such a mat requires foam, a knife, acrylic paints or gouache, tape and sealant. The desired shape is cut out of the foam and you can begin to decorate it with paints, creating an unusual geometric pattern or any other design of your choice. Scotch tape is needed so that when creating a geometric pattern, the paint does not go beyond the boundaries. Finally, the surface is treated with a sealant for protection.

We cut out the base from the foam. We tape the borders of fragments of different colors with tape. We paint the product.

Rug in decoupage style

A very fashionable trend in modern needlework can be successfully used to make our rug. To do this you will need the following materials and tools:

linoleum;
stationery knife;
scissors;
PVA glue;
napkins with a pattern;
acrylic paints
foam sponge;
varnish

Using a stationery knife or scissors, we cut out the shape of the size we need from the remnants of linoleum. Usually it is a square or rectangle with a maximum side of 25-30 cm. But you can also choose a non-standard shape, for example, an oval or a circle.

For convenience, we make the corners of the computer mouse pad rounded. Using a tampon and acrylic paint, cover the surface of the linoleum with a tonal color (for example, white). Apply a layer of PVA glue on top of it and lay out a pattern from napkins. By the way, decoupage masters advise sticking each drawing after the previous one has dried. And you should not apply too much glue or dry the surface with a hair dryer. Because of this, rather unsightly “wrinkles” can appear.

The next stage is surface varnishing. After this, the computer mouse pad can be tinted again with a color contrasting with the main one.

The final stage is the second surface varnishing. Experienced craftsmen advise applying up to 5 layers of varnish sequentially.

This is important because you will be moving the mouse across the mouse pad, which can wear out the protective layer that is too thin.

Features of making a play mat

You need to decide on the size of the product and take into account that the rug should not slide on the table. For this, special coatings or fabric are used;
The mouse, on the contrary, should glide well;
To make the rug look neat, you can round the edges of the part: use a glass or jar that has a round shape and trace around the edges with a pencil. This must be done before applying the film or fabric;
To ensure that the paper or fabric lies flat on the edges without creating unnecessary folds, make cuts at the rounding points and glue the pieces of fabric or paper one at a time. Then the edges will be smooth and beautiful;
If you use paint or paper, be sure to apply a film on top so that you don’t ruin the decor with your mouse. Remember that the surface will be actively used by the mouse, so take this into account.

It must have special characteristics. First of all, slippage is eliminated. On the other hand, the mouse should move as easily as possible on the mousepad.

Is it possible to work at a computer without a mat?

About 20 years ago, a rug was a mandatory attribute of any computer. It was almost impossible to work without it - and all because in those days mice were mechanical. To slide on the mat, a rubber ball was used, which was highly sensitive to the type of surface. It simply slipped on the smooth, glossy surface, and the work turned into real torture.

After the advent of optical mice, in which the movement of the manipulator is monitored using an LED, the role of surface texture decreased, and for laser models it ceased to matter at all. Nevertheless, rugs are still actively used today. Firstly, to ensure maximum comfort when working. Secondly, when used for a long time, the mouse scratches the surface of the tabletop, and its wear when in contact with a hard surface occurs at an accelerated pace.

So the answer to the question posed can be twofold. Yes, indeed, a rug today is considered an optional accessory. On the other hand, its use is recommended for the reasons stated above.

Our recommendation is the following: if you spend a lot of time at the computer, it is better to use a mouse stand, but if you appear at the monitor periodically and irregularly, you can work without a mouse pad.

If you prefer to use this accessory, you don't have to buy it. This article will help you decide on the choice of material, and you can find interesting decorating ideas online. By the way, we are waiting for your photos with such crafts - perhaps they will inspire someone to do similar creativity.

How to replace a mouse pad

If you don’t want to spend money on a special accessory and don’t want to make it yourself, you can replace the mat with a thick notebook, a magazine or a piece of cork sheet. The main criterion is density and appropriate dimensions. A rug can be beautiful, but comfort comes first.

To make such a stand at home, absolutely no skills are required. A piece of cork sheet is given the desired shape.

You can also use the spine of an old notepad or book that has been irreparably damaged. Cut a piece of the spine and cover the edges with duct tape or tape to keep it looking neat. Remember that you can make a mouse pad yourself from scrap materials. It will reliably protect the table from scratches and ensure comfortable work at the computer. This handmade accessory can be used independently, or you can give it as a gift. The option for gamers made from plexiglass with backlight will be especially pleasant.

You can create a creative mouse pad at home. It will be cheaper than buying in a company store, and, at the same time, no less convenient.

How and what to make with your own hands: detailed instructions

Let's look at several ways to make a “real” mouse pad. One that will last a long time and will be practically no different from its store-bought counterparts.

From linoleum

A piece of old linoleum.
Scissors.
Ruler, pencil.

We cut out a rectangle from linoleum, for example, 20 by 24 cm. For convenience, the edges can be made rounded. That's all, you can use it! The sheet can be given any shape, depending on your wishes and imagination.

From a plastic napkin with a pattern

Everything is the same, only instead of a piece of linoleum we use a kitchen plastic napkin.

Leather

Everything is the same, only replace the linoleum with a piece of hard tanned leather. An old suitcase or bag is suitable as a source of material. Women's boots may be used with the consent of the owner. For a denser version, glue two pieces of leather of the same size together with “Moment”. You can additionally sew the edges on a sewing machine if you know how.

You can apply an original design to the rug using acrylic paints. After drying, acrylic is resistant to water, does not smudge or wear off. There is no need to varnish the acrylic drawing.

If the skin is thin, we use the following option. Cut a piece of the required size from an old tourist “seat”. Use “Moment” glue to glue a piece of leather to the foam. Let dry. Ready!

A more complicated option

A piece of linoleum 20 by 24 cm.
Scissors.
Ruler, pencil.
Glue "Moment" or PVA.
A picture or photograph printed on a printer/cut out of a magazine/drawn by hand.
Self-adhesive transparent film.

We cut out the picture to the size of a piece of linoleum. If the linoleum pattern shows through the picture, it must first be tinted with acrylic paint. Carefully glue the image. It is advisable to apply a little glue around the edges. We dry it naturally. Cover the top with a sheet of A4 self-adhesive film. Smooth it out. We cut off all excess. You can use two pieces of film for reliability.

A monochromatic or repeating pattern looks impressive. A computer mouse will have better contact with a dark-colored mat. If you do everything carefully, you get something like:

Made from plexiglass

If you have the skills, you can cut a shape out of plexiglass, place LEDs, attach a USB connector to them, and connect it to a computer. You will get a glowing rug. The video below explains in detail how to make one.

Video: backlit computer mouse pad

Play mat

This mouse pad differs from a regular one primarily in size and structure. Gaming mats are much larger, some are made specifically for the keyboard. They are made of rubber, the reverse side fits tightly to the table to prevent slipping. Since gamers set low mouse sensitivity for ease of play, the radius of mouse movement increases significantly, which explains the large size of the mousepad.

Manufacturing

This procedure must be approached with all seriousness, since your success in the game will depend on the quality of the product.

An old travel foam rug/a decent-sized piece of isolon
Scissors.
Pencil, ruler.
Self-adhesive film with a pattern for decoration.
Double sided tape.

How and what to make with your own hands: detailed instructions

Let's look at several ways to make a “real” mouse pad. One that will last a long time and will be practically no different from its store-bought counterparts.

From linoleum

A piece of old linoleum.
Scissors.
Ruler, pencil.

From a plastic napkin with a pattern

Everything is the same, only instead of a piece of linoleum we use a kitchen plastic napkin.

Leather

You can apply an original design to the rug using acrylic paints. After drying, acrylic is resistant to water, does not smudge or wear off. There is no need to varnish the acrylic drawing.

If the skin is thin, we use the following option. Cut a piece of the required size from an old tourist “seat”. Use “Moment” glue to glue a piece of leather to the foam. Let dry. Ready!

A more complicated option

A piece of linoleum 20 by 24 cm.
Scissors.
Ruler, pencil.
Glue "Moment" or PVA.
A picture or photograph printed on a printer/cut out of a magazine/drawn by hand.
Self-adhesive transparent film.

A monochromatic or repeating pattern looks impressive. A computer mouse will have better contact with a dark-colored mat. If you do everything carefully, you get something like:

Made from plexiglass

Video: backlit computer mouse pad

Play mat

Manufacturing

This procedure must be approached with all seriousness, since your success in the game will depend on the quality of the product.

An old travel foam rug/a decent-sized piece of isolon
Scissors.
Pencil, ruler.
Self-adhesive film with a pattern for decoration.
Double sided tape.

We cut out our blank from a tourist rug. This should be a fairly large piece that will accommodate both the keyboard and the mouse, at least 30 by 60 cm. To prevent the foam from curling, it can be very carefully smoothed out with a not hot iron. Then we apply a self-adhesive film on top of the “front” side (that is, the one without foil). The product is almost ready. To prevent it from slipping, it can be glued to the tabletop with double-sided tape.