Make your own scorpion mask

A wonderful idea is to give those born under the constellation Scorpio a corresponding origami figurine. Schemes for assembling arachnids for the most part are accessible even to not very experienced craftsmen. Perhaps the fact that in Japan the scorpion is considered a symbol of wisdom and nobility will add inspiration. And his figurine, attached to a bouquet of flowers, means a wish for a long, happy marriage.

Scorpio costume. Cosplay. How to make a mask from epoxy resin

1. It all started with making a mold from plasticine for a papier mache mask. I sculpted it on a concrete head made in the shape of my head.

And that’s what happened, a total of 5 hours of fiddling around and the form is ready. Next, the plasticine mold must be greased with oil or Vaseline, so that later you can easily peel off the papier-mâché mask.

3. You can use toilet paper, or you can use newspaper, but when you need maximum detail, then toilet paper is better. I applied about 6 layers of paper, this is not enough, but then I reinforce it with something else.

4. For strength, I put gauze between all layers in the middle, it’s like bum carbon or bum mesh fabric, but that’s not all.

5. It takes about 3 days to dry in the room without a hairdryer, but with a hairdryer you can dry it in 1. taking the plasticine out of the mold

7. I drill out the airways and use a file to level them. (In the original, the scorpion does not have airways, but I made it so that it would be comfortable to wear for a long time)

8. And here is the reinforcement of the mask with epoxy resin and fiberglass. 2 layers from the inside applied

9. I first paint it black and after drying I paint it gold and don’t let it dry, I start rubbing it with a rag, this way I create abrasions and some kind of structure there, I’m not an artist.

10. I first cover the respiratory tract with a metal grill and then with a black thin cloth and simply glue it

12.further foam pads for comfortable wearing

13. The mask is ready, let's move on.

16. I use some simple techniques to add volume to the bracers

17. eva foam can be easily shaped by heating it with a hair dryer, holding it for a while and any shape is ready.

18.I make the same straps as in the mask and glue them with a glue gun. holds firmly

18. done, let's move on.

19.I make a scorpion vest from denim fabric. I outline on paper forms

21.and here I sew Velcro on the inside of the belt. There wasn’t enough yellow fabric, so I sewed gray fabric inside the belt (waistband), it’s not scary, because it’s not visible.

22.and here I sew on bias tape and edging to make it more beautiful

23. I make holes on the belt for lacing

24. and now everything is ready

and here is the suit. I didn’t buy white pupils like the original ones, they are expensive and they say they are hard to see and not comfortable to wear. and I made a suit to wear at events. Maybe I’ll go to Igromir 2022 in it, or I’ll make a different costume, a different character. I also made a dummy of a flying snake, like in the 1995 film, in the forest. but the snake turned out to be unsuccessful. but there is a video about the snake and about the scorpion costume on YouTube

Source

Model by Josef Sebe

A Hungarian origami artist offers his own version of an origami scorpion, which is quite simple to make. The emphasis here is on the plastic properties of the paper, which makes it possible to avoid the angularity characteristic of many classic models. It is better to use a “kami” model in the form of a 21x21 cm square.

Step-by-step instruction:

We outline one of the diagonals by folding.
We bend the right and left edges towards the central axis.
We make the so-called “hare fold”. We make sure that the “mountain” and “valley” folds are correct.
Turn the workpiece over.
Bend down the top triangular flap.
Fold the side edges towards the central axis.

We turn the workpiece over again.
Bend the top part along the dotted line.
We bring the lower triangular valves inward. Raise the central part according to the arrows.
Make a dotted fold for the first layer.
We repeat the previous step for the second, but with a slight indentation.
Rotate the workpiece 90° clockwise.
We bend it in half like a “mountain”.

Fold the right acute corner along the dotted line. We open the workpiece from the inside. We move the “claws” apart.
Fold the small triangles forward.
This is what should happen.
Using triangular folds resembling darts, we lift and form a “tail”.
Round the claws. Flatten the uppermost sharp part of the “tail”. In scorpions, this organ is called the telson - it is here that the poisonous glands are hidden in a special needle.

You can turn the origami scorpion backwards:

Features of paper scorpion

Many fantasy fans may know exactly how to make a paper scorpion mask in the Mortal Kombat style, but not many are aware that there are other types of crafts. You can make a magnificent three-dimensional figure of a real Scorpio, make a beautiful picture of the zodiac as a gift. And all these crafts are formed either from paper or cardboard.

Examples of crafts in the form of a scorpion

Options for finished paper scorpions that are most popular:

There are many more options and types of crafts of this kind that can amaze the imagination.

Option without hind legs

Let's look at another step-by-step diagram for assembling a scorpion from a square sheet of paper. As usual, all steps are performed one by one, acting according to the sequence numbers of the diagram.

The folds are made clear and carefully smoothed with your fingers or using a ruler. For work, it is most convenient to use thin paper, because you need to make a lot of folds, and bending a stack of paper in several layers in the right direction is not easy.

Before finally ironing the fold, check its correctness and symmetry of one and the other half. This is the most difficult thing in paper origami, since it is difficult to bend the paper at the same angles by eye, and the asymmetry will make the work untidy and skewed.

Required materials and tools

When making any craft, paper is used. It can be a regular white or colored base. To strengthen the structure or create a more durable figure, cardboard of different hardness is used.

Additionally, you will have to use paints, glue and scissors. To make the composition more complete and “reliable”, you can use decorative elements - beads, ribbons, small plastic stones. To determine dimensions and prepare sketches (diagrams, drawings), a simple pencil and ruler are used.

Step-by-step assembly of a scorpion using modular origami technique

You can get a three-dimensional figure of a scorpion with detailed detailing by assembling it using the modular origami technique. In this case, you can use a variety of colors to assemble the modules, but more often the assembly is made from white paper.

Scheme using the modular origami technique of a scorpion:

The result will be this version of a three-dimensional scorpion figurine.

Origami with a simple diagram

To create an interesting craft for such a dangerous arthropod as a scorpion, it is enough to use a not too complicated assembly scheme.

Scheme for assembling an origami scorpion from paper:

The result will be a scorpion created using the rigami technique. In this case, a completely simple scheme will be used, which a primary school child can repeat.

Applications for children in quilling style

It is interesting and educational to make a paper scorpion with your child using the quilling technique. This version of work includes several principles of working with a paper base - cutting, modeling, gluing to the base. This is an ideal type of work for children. How to make an applique in the quilling style:

This composition can be an excellent painting to decorate a notebook or wall.

Mask ideas

On the eve of the holidays (New Year, Halloween), the question arises as to how to make a scorpion mask out of paper. The most popular option remains the mask from Mortal Kombat.

Mortal Kombat paper scorpion can be made using a ready-made template:

A paper scorpion mask made in accordance with the stated design will be an excellent basis for a cosplay costume. You can detail the product through the use of decorative elements and details.

To complete the look you will need a kunai, which can also be made from paper. You can get a detailed master class by watching the following video:

Source

It's interesting to know

The ancestors of modern scorpions lived on earth over 4 million years ago. They were called eurypterids or crustaceans. Fossil arthropods lived in the depths of the sea and only a million years later they moved first to freshwater bodies of water and then to land. The length of these giants, distinguished not only by their size, but also by their extreme aggressiveness, was up to 1.5 m with a width of 1 m. Today, the largest species - Emperor scorpions, common on the African continent, rarely reach 25 cm. Of the 1750 representatives of the order known to science, for Only 50 are dangerous to humans. The poison of the rest does not have a strong effect on the body.

Some species of scorpions have become pets. Despite their frightening reputation, the life of these arachnids is worth getting to know better. For example, not everyone knows that:

The female scorpion carries her babies on her back for the first 10 weeks after birth. As soon as they are born, the offspring immediately, in the literal sense of the word, “sits on the neck” of the mother, firmly anchored by the suction cups on the legs. Scorpions are viviparous arachnids.
In China and Thailand, these predators are fried on bamboo skewer and sold as street fast food.
At home, scorpions live up to 10 years. They usually breed large and attractive tropical species, which are also the least poisonous. Experts do not recommend keeping several individuals in one terrarium - if the owner forgets to give food on time, they are quite capable of snacking on each other.
In nature, scorpions can easily go without food and water for several months. Interestingly, while eating regularly, they do not drink at all. And only in times of hunger are they forced to replenish their fluid supply.
Even with a dozen eyes, the scorpion does not have good eyesight. When hunting, it relies on its keen sense of smell and sensory organs.
Some species glow in ultraviolet rays.
The most dangerous species are those found in Pakistan. Their poison is several times more dangerous than potassium cyanide and can easily kill an adult. However, it is also used in the pharmaceutical industry, being considered an effective remedy against malignant tumors. In China, wine infused with scorpion tails is used as a pain reliever.

Features of paper scorpion

Examples of crafts in the form of a scorpion

Options for finished paper scorpions that are most popular:

There are many more options and types of crafts of this kind that can amaze the imagination.

Gallery: photos of finished crafts

Weaving pattern

It’s not our place to judge whether this is true or not, but we can weave a scorpion from beads to add to our zoo or as a gift. Approximately 1/12 of the world's population was born under the sign of Scorpio. This means that there will be such people among your friends or relatives, and any of them will be glad to receive a gift made with their own hands.

According to this pattern, weave 2 bodies. One with legs, tail and claws. Second without. Weave the second body UNDER the first. Add common beads to the seams. When both bodies are connected, bend the claws, legs and tail as a scorpion should. That's all. Scorpio is ready.

Knowing how to weave a scorpion , you can make this fun figurine in a matter of hours.

What kind of craft can be made from metal?

Having thought carefully, the owner decides to present a piece of the unusual to his home, but the question immediately arises: should he buy it or make it himself? Of course, do it yourself, because doing something with your own hands is much more pleasant and more profitable from a price point of view.

Today, forged ornaments for grilles, doors or fences are in fashion; forged animals, a mysterious owl, or a Russian bear also look great in the garden. Ladies prefer forged bouquets, and a rose created with their own hands will surprise anyone.

Required materials and tools

When making any craft, paper is used. It can be a regular white or colored base. To strengthen the structure or create a more durable figure, cardboard of different hardness is used.

Step-by-step assembly of a scorpion using modular origami technique

Places for keeping

The most favorable way to keep a Scorpio at home is to isolate it, since some representatives show aggression towards neighboring inhabitants and can even destroy their roommate. A glass terrarium is best suited for keeping. The minimum size of a terrarium for an adult scorpion is at least 0.3x0.3x0.2 m, or from 0.4 to 1.6 square meters.

A prerequisite for a terrarium will be the presence of a variety of branches and stones, since scorpions tend to sleep during the day and lead an active lifestyle at night. Before placing the decorations in the terrarium, it is necessary to treat them against all kinds of parasites, fungi and bacteria. The best soil is one that allows air to pass through and does not create high humidity. The size of the substrate layer should be from 5 to 8 cm, since the scorpion is a domestic animal that digs minks.

Moss, peat, coconut shavings or humus are suitable as flooring. They will ensure normal air circulation and the absence of excess moisture. It is also possible to use tree bark. The soil should be replaced every 3 to 4 months. Species whose natural habitat is the desert will need sand in the terrarium. It is highly not recommended to use ordinary plant soil as a terrarium filler, even after it has been treated. To keep a scorpion at home, it would be best if you place a thermal resource in the corner of the terrarium, and create a humid environment on the opposite side, then your inhabitant will be able to determine for himself where it is best for him.

Master class on making roses

And materials. List of basic tools:

Attention. Do not forget about safety precautions when working with these tools! Be sure to wear gloves and a welding mask when working.

We take metal cutting scissors and cut out thirty rose petals (thirty petals will make the bud seem more magnificent). You need to move in cutting from small to large, that is, from 15 mm to 80 mm. Your rose should not be prickly. Therefore, a sharpening stone will help smooth out all the unevenness of the petals.

After forming a complete flower, we weld the spikes and clean off the excess with a grinder, clean the seams and cover with a layer of protective paint - the craft is ready.

Some interesting facts

Metal is the most ancient mineral of interest to humans. He mined it, forged it, and then a new fence or another forged deer lit up the smile of passers-by.

During the rapid introduction of Hollywood films and the development of artificial intelligence, the topic of androids and the like became relevant. Although the world is far from the rise of the machines, it is always possible to forge a transformer, say, for an exhibition.

Vitaly Yashkovich from Krasnoyarsk became famous throughout the city for his miracle robots. His collection includes such titans of world cinema as: Megatron, Terminator T-200 and T-800, Star Wars androids, as well as droids from cartoons. The owner himself claims that he will not sell his robots to anyone, they say, he created for the soul

You too create, because the world is unidentified and multifaceted. Give him something new and unusual.

Source

Paper Dragon Pepakure\Papercraft

I was on a business trip, in my free time I decided to occupy myself a little, as a result, in 2 weeks I glued a dragon out of paper, the first major work, so, I want to not stop there and bring it to perfection, so to speak, but here I need the help of paper veterans) how to strengthen model and how best to paint it? I read that you can coat it with epoxy, but I’m afraid that the model might shrink, so I took the paper for drawing. What do you advise?

Modular origami

For the simplest scorpion using the 3D origami technique, you will need 74 modules, 1/32 in size. In the sample they are white, but you can use more natural colors: ocher, light green or olive. If the product is intended for a gift, it is better to immediately “plant” the modules with glue. A simple origami scorpion is well suited for beginners or children.

Step-by-step instruction:

The scorpion is made from modules using the origami technique.

The video tutorial shows a diagram of a more complex model of 171 elements. It is made in two colors – red and black:

If you don’t have a cat, but really want one, just make one out of paper)

Self-isolation is not a reason to be sad, quite the opposite, time is learning something new, I recently got such a cat