In the snowy winter, kids happily transfer from strollers to sleds. And here the question arises about the insulation of these very sleds. The choice of mattresses in stores is small, and choosing by color, quality, price, and size is not always possible. Therefore, I suggest you sew a mattress into a sleigh with your own hands: it will not only make winter transport as warm, soft, and comfortable as possible, but will also serve as decoration for it.
How else can you decorate a sled? Follow the link below to find our detailed master class, which shows how to decorate a children's sled using the decoupage technique.
We sew a practical and warm cover for a sled
Materials: men's long, used jacket, preferably with a drawstring at the bottom and a zipper with two dogs, a mattress or any other insulation, ropes, synthetic down for stuffing the pillow, scissors, a needle, threads, pins.
A sewing machine is not necessary! Working time: maximum 1 hour, can be completed in 45 minutes.
So here are my supplies:
The beloved child is put to bed, no one bothers him, the action plan has been brewing all day), after buying a sled. And so I begin what I have planned.
22:00 I cut the mattress to fit the seat. The length of the mattress should not exceed the length of the jacket.
22:02 I try the jacket on the sled, turning it upside down. It is important that the zipper has two pawls, because... it will open from the bottom of the jacket up. I mark the cutting line for the sleeves and cut off the excess. Don’t put them off too long; they will be used to make a wonderful pillow for greater convenience.
22:07 I insert the mattress into the jacket and distribute it along the center of the back of the jacket, securing it temporarily with pins.
22:10 I turn the trigger inside out, pin the holes from the cut off sleeves and neckline, and then use them. Pull out all the pins and count them, leaving only those that hold the mattress inside the cover.
22:18 Now I turn inside out not the jacket, but the cover. Trying it on on a sled.
I outline the places for the ties that will attach the cover to the sled and hold the inner mattress. I sew the ties right through, grabbing the mattress inside the cover. Five ties were enough for me, three holding the back and two at the legs. I'm removing all the pins!
22:30 I sew a pillow from sleeves. I cut both sleeves along the seam (it takes a long time and there is no need), fold them facing each other, and cut the pillow in the form of a trapezoid, in other words, I cut off the bottom of the sleeves. The height of the pillow should be 10 centimeters higher than the height of the back of the sled, for the baby’s comfort. I sew it together, leaving a hole for turning and stuffing. I turn it inside out. I'm stuffing. That's it, the bear now sits more comfortably, and you can even take a nap on the way to grandma :)
22:45 Done! Warm! Comfortable! And most importantly, quickly!
Source
DIY sled bag
Sleigh rides are one of the favorite winter activities for adults and children. A sled is a safer option for snowboarding. Sitting in them, you can conquer snow-covered hills. Every child will be happy with such “extreme”, and parents will not worry about the child’s health, because it is almost impossible to fall out of the sled.
To make sleds not only an exciting entertainment, but also a universal means of transportation for the baby, bags and covers for the sleds were invented. They are used to transport things of various sizes in sleds with a rigid handle . Thanks to the secure fastening and dense material from which the bag is made, it can be used in any weather conditions - things will remain dry. A sleigh cover will make your baby’s walk more comfortable and warm.
REFERENCE! The bag and cover for the sled are also convenient because taking them off, washing and drying them is very simple, quick and easy.
Product Features
The sleds with retractable wheels are designed in such a way that they allow mothers not to worry about the weather conditions. It is known that at the end of winter and beginning of spring, when the snow begins to melt, the use of conventional runners becomes extremely irrational. They begin to scrape along the asphalt, thereby creating unpleasant sounds. And the child’s impressions of the walk can be ruined.
A sled-wheelchair with retractable wheels is equipped with additional elements that make the process of movement convenient and as comfortable as possible. This thing has a long push handle, so mom doesn't have to bend over to push her baby. Let nothing distract you and the little man from your walk. After all, the world around us is fraught with so many interesting and significant things!
What you need to sew a bag
Resourceful mothers decided not to spend money on buying expensive sled bags and created a way to make this useful thing with their own hands.
We will look at two ways of creating: with and without a pattern .
For a bag with a pattern
We will need the following.
Simplified version
Sewing involves the use of such materials.
REFERENCE! The use of a sewing machine is not provided for this option; the work can be done manually.
How to sew a bag for a sled
Sewing a sleigh cover is a labor-intensive process, but the result is definitely worth the effort.
The first method is with a pattern
To create a bag you must follow these steps.
Seat
Velcro
The result of the work is in the photo.
The second method - without a pattern
IMPORTANT! From the sleeves of a down jacket you can sew a comfortable and soft pillow for your baby. Just sew them together, leaving room for stuffing. Then stuff tightly, stitch around the edges and that’s it!
Enjoy your sleigh ride with your baby and you with this wonderful and warm bag-cover.
Source
DIY sled bag patterns
The first seat was made for my child, I wanted to make something interesting and at the same time make it warmer and more comfortable than cheap store-bought ones made from calico (impractical on the street in winter clothes) and synthetic padding (rolls into a lump) or foam rubber (rots after 3 years). Some people are happy with this option (I have nothing against it).
The calico was replaced with FLEECE/POLARTEK (it is warm, soft, does not fade, does not shrink, bright colors). You can also use FURNITURE FABRIC or FUR.
I insert ISOLON (sports mat) INSIDE, it retains heat, while the child does not come into contact with the metal back of the sled and the seat.
Izolon has advantages over any other materials (it does not rot over time or from moisture like foam rubber, does not cool in the cold like any other materials, and is wear-resistant).
I sew sled seats of different types and complexity. The cost depends on the complexity (design) and the chosen material. If you want to buy a cheap sled seat, then it makes sense to buy ready-made seats in the store.
About FABRIC as a BASIS for a sled SEAT
I sew sled seats of different types and complexity. The cost depends on the complexity (design) and the chosen material.
Seats for sleds using the technology I developed, I sew individually to order for 5 years, the most CONVENIENT and WEAR-RESISTANT materials for winter are
1 FLEECE / Polartek, 2 FUR, 3 FURNITURE FABRIC.
WHY DO I NOT sew seats for sleds from calico? 1. such seats can be bought in a store 2. they are impractical for winter clothes
WHY DO I NOT sew sled seats entirely from JACKET FABRIC 1. Such covers for sleds are sold in stores 2. It will be inconvenient for you to use, since the jacket fabric slips. 3. The jacket fabric is quickly wiped clean on the sled. And since store-bought covers for sleds are made from the thinnest fabric to reduce the cost, they are wiped not only on the outside, but also on the inside (then they bring me such covers for sleds and sleds and strollers to alter and replace the fabric).
All internal parts come out when washing.
I insert ISOLON (a sports mat) INSIDE the seat of the sled, it retains heat, while the child does not come into contact with the metal back of the sled and the seat. THICKNESS 1CM in the back and 2CM in the seat.
Izolon has advantages over any other materials (it does not rot over time or from moisture like foam rubber, does not cool in the cold like any other materials, and is wear-resistant).
WHY DO NOT I put FOAM inside? 1. foam rubber absorbs moisture (why do you think tourists take isolon mats with them, and not foam rubber mats, to sleep on the ground) 2. foam rubber rots after a couple of years (anyone who has seen an old foam rubber mattress will understand)
DESIGN: 1 front backrest (the child’s back is in contact with it) 2 rear backrest (you can make an applique or pocket on it), 3 seat bottom
1450 rub. for SEWING seats of this design (plus materials and accessories)
WHAT'S INSIDE THE SEAT?
I insert ISOLON (a sports mat) INSIDE the seat of the sled, it retains heat, while the child does not come into contact with the metal back of the sled and the seat. THICKNESS 1CM in the back and 2CM in the seat.
Izolon has advantages over any other materials (it does not rot over time or from moisture like foam rubber, does not cool in the cold like any other materials, and is wear-resistant).
WHY do I insert Isolon, not FOAM, inside? 1. foam rubber absorbs moisture (why do you think tourists take isolon mats with them, and not foam rubber mats, to sleep on the ground) 2. foam rubber rots after a couple of years (anyone who has seen an old foam rubber mattress will understand)
About SEAT BELTS (specify for me when ordering a seat).
1. If the design of the sled includes seat belts, then I make holes for them in the seat of the sled (this is not added to the cost of manufacturing the seat)
2. If the sled you bought does not have seat belts, but you need them, I will make them (not added to the cost of making the seat, only for the sling and fastex)
WHY DO I NOT attach the seat with ties (like they sell in the store) - many people complain that it’s inconvenient because they come undone (remember the laces on your shoes)
I AM ATTACHING THE SEAT TO FASTEXES.
I buy fastex only those that work well, and not the kind you get on strollers that you can break your fingers while unfastening (check the fastex when buying a stroller).
As an alternative to appliqué, the BACK back (in a two-back design) can be decorated with patterned jacket fabric. But fleece, fur, and upholstery fabric are still better suited for the SEAT and FRONT backrest. Since it will be uncomfortable to sit on the jacket fabric, it will slide.
Warm COVER for LEGS (COVER for LEGS) can be WITHOUT ZIPPER
COVER for LEGS 850 RUR work (without zipper, universal for stroller and sled)
This cover can also be used on a stroller with this design (read the next post about the materials used)
UNIVERSAL suitable for sleds and strollers https://vk.com/photo-69512695_456239156
IN STOCK. I send to other cities.
The color may be different upon request.
Warm COVER for LEGS (COVER for LEGS) can be WITH ZIPPER for the sled
950 rubles for work (plus materials and accessories).
Unlike ready-made goods in a store, the final cost of a foot cover DEPENDS on the materials and accessories you choose
Fabrics that I have (with a pattern), if you like something (different quantities must be specified specifically) https://vk.com/album-69512695_224161026
2 As INSULATION I use ALPOLUX (thin 125 RUR/m, medium 180 RUR/m, thick 245 RUR/m), if you have already purchased insulation, I can sew it from yours
(just not padding polyester, this is an outdated material, many complain about store-bought products because it rolls into a lump and is not foam rubber, it does not heat at all)
3 INNER part of the COVER for LEGS is most often ordered:
1 jacket fabric (plain or patterned) 2 fleece\polartek
In order to be cheap and high quality at the same time, you have to choose and the choice depends only on you. If you choose more expensive materials that will last a long time, then it turns out more expensive and vice versa.
Therefore, the final price depends on the material you choose, the thickness of the insulation and fittings. View all images
HOW IS THE LEG COVER ATTACHED TO THE SEAT ON THE SLED?
I sewed the first cover so that it was fixed to the linden around the perimeter of the front part of the seat (photo 1),
but then I started making it so that it is attached with buttons, which allows it to be moved as the child grows (photo 2, like all the other photos)
If you have any other suggestions for fixing the case, please tell me.
Advantages and disadvantages of STORE covers for sled legs and seats
Advantages 1. cheap (due to the use of the cheapest materials) 2. beautiful (printing a design on fabric is cheaper and easier than making an applique)
Disadvantages 1. cold (foam rubber) compared to isolon (in the seat) and alpolux insulation 2. fragile (thin fabric) 3. the child slips on it
1 var DESIGN of a sled seat, consisting of three parts
1 front backrest (the child’s back is in contact with it) 2 rear backrest (you can make an applique or pocket on it), 3 bottom of the seat
1450 rub. for the work (plus materials and accessories)
All internal parts come out when washing
This design allows you to put the seat on the iron back of the sled from above; this makes life easier when walking, since it DOES NOT SLIP ANYWHERE
This is the cost for the work (for different design options). I can tell you exactly how much material will be needed when I make the pattern on the fabric (different sleds differ in size). That is, you need to decide exactly whether you will order and what design, and in terms of fabrics and materials, I will tell you everything that is best, what is cheaper, what is more expensive, we will discuss everything and choose the appropriate option. If you have questions about the design (which is better, worse, different) or if something is unclear, please ask.
As an alternative to appliqué, you can decorate the back with jacket fabric with a pattern, but sitting on jacket fabric will be uncomfortable; fleece, fur, and furniture fabric are better suited for the seat.
Or you can make the back wall of plain fleece with a large pocket made of patterned jacket fabric.
Source
Cover (envelope, mattress) for the sled. Pattern.
Well... I finally finished it and can happily show it to you)))
1) raincoat fabric 100*150cm
2) lining fabric 100*100cm.
In total, I spent 350 rubles on materials. And not all the material was gone, there was still left for a bag that I haven’t sewed yet)
Here is the pattern itself:
Back: Your length. The width is also yours. I stitched around the perimeter of the entire piece so that the lining would not roll down. I sewed on the buttons, adjusted them to size and there is a special tie at the back. (I will show you in detail later).
The envelope itself: I made it according to the principle of envelopes for newborns. Just my measurements again.
k is the length of the sled seat itself.
n is the distance by which the sidewall rises.
c - the length of the legs... well, I have this length until the end of the sled, so mine might fall asleep and fall apart))))
r - this is the length just enough for the rise of the sides, the very length of the legs and plus I will have a turn)
Cut out 3 parts and sew everything together. And stitch again to support the lining. Well, I think you’ll figure out the rest))
Well, here’s the sled cape itself:
And here you can see that when I sewed the backrest and seat together, I left a small space for the seat belts! )) Because I sewed the buttons myself, then I decided to decode the stitches themselves with a button like this))
I sewed these special ribbons around the entire perimeter of the envelope in the right places for fixation.
Well, this is an unfolded envelope))
Well, we’ve got such a cute sled cape! Girls, use the pattern, design your own, play with different fabrics and colors, good luck in your endeavors)
Oh... and for myself! I'm delighted with how I turned out! Considering that I am self-taught, I have been sewing for only 2 months at most, and I was very worried about trying something more serious! I’ll tell you honestly, there were a lot of jambs) I even opened it once) There were so many tears! But it's worth it!
Please do not be shy, express your opinion, I will listen to your criticism with dignity! ) Thank you in advance)
Source
Sleigh bag
Good day
When I was pushing my daughter in a stroller, it was convenient to put things in the bag. And everything was at hand. But time passed, the child grew... And we grew up to a sled. Sledding is great in winter! Convenient, easy, safe - but there is nowhere to put things. How to be?! Backpack - you say! No, it's not for me! I'm not ready to take it off/put it on a hundred times. The fact is that we are walking on a site the length of a six-entrance house. And it’s really inconvenient to get all the toys at once. Now we want to swing, now we want to go uphill, dig, sculpt, play ball. No, now let’s run to that swing - catch up! - and my daughter ran headlong. And instead of catching up, I will frantically collect all the toys in my backpack? No, it won’t work that way! Although this option is good for freezing people - always on the move. Shouldn’t I sew a bag for a sled? - I thought. The idea is good and we went to the store. We bought everything we needed. I measured the handle of the sled, estimated the dimensions, drew what I wanted and got to work. I must say that I never repaired the sewing machine... And I had to sew everything by hand... I sew... and sew... and sew... And my son keeps joking: “Summer will come faster than you can finish your bag.” Well, let it be! So next winter we will have a bag. Yes, yes, it was not easy to sew a bag. But I sewed it! Hooray! And I will be happy. The bag turned out to be bright, comfortable, with pockets! Everything fit and there was even room left. Bag size 60 cm x 32 cm x 4 cm. One large pocket with a flap with buttons, two pockets on the back (with a zipper and a button), one pocket on the front with a button. And now when we walk, we always have spare mittens, a scarf for mom, a wallet, a phone, keys, napkins, shovels, a bucket, a ball, a snowball, and even a snack (we walk for three hours). This is such a magical handbag. Now it’s convenient to take out toys and put them away! The bag attracts the attention of mothers)) It is the only irreplaceable thing for a sled!
Well, that's all)) Thanks everyone for your attention!
Yamogu: I really like to knit for Baby Born and Gotz dolls. I will be happy to dress up your kids
Yamogu: I can sew clothes for a doll that I have in my collection. Carefully and creatively. I embroider with cross stitch and satin stitch. Always happy to chat! Stop by for a visit.
Source
What to sew from a down jacket and an old jacket with your own hands - the Kurpach method
Today's consumer, of which I include myself, gets bored with things faster than they can become unusable. Old socks and T-shirts are usually used as dishcloths, but what to do with high-quality and expensive jackets and down jackets? Before introducing the reader to the ideas of remaking old jackets with your own hands, I will tell you about kurpacha.
The exotic word means rug-blanket-mattress. It came from Central Asia, where such a product has been a household item for centuries.
First, the master quilted a layer of cotton wool, first beating and fluffing the natural fiber. Then a cover made of silk, velvet or cotton was put on the resulting mattress for the upper, front half. The bottom surface of the cover was always cotton. A thin soft mattress was sometimes additionally stitched with threads.
They sat on kurpachi while eating and talking, and slept at night.
In Russian culture, the closest relative of kurpacha was quilted cotton blankets.
Such things are still preserved in Russian families and serve faithfully.
Here are some remakes of old jackets based on the kurpaca technique, hopefully they will inspire the readers.
What you need to sew a bag
Resourceful mothers decided not to spend money on buying expensive sled bags and created a way to make this useful thing with their own hands.
We will look at two ways of creating: with and without a pattern .
For a bag with a pattern
We will need the following.
Simplified version
Sewing involves the use of such materials.
REFERENCE! The use of a sewing machine is not provided for this option; the work can be done manually.
For mountaineering tourists
It happens that you have at your disposal not just a down jacket, but an entire mattress or duvet. Don't rush to waste this treasure on trivial pillows. Sew a real down sleeping bag!
In general, approach the issue creatively. Put the item in front of you and look closely at it: does this piece of outerwear inspire you to transform it into something beautiful? If not, take it to the trash or to a charity. Perhaps someone will be happy with such a gift - don’t be greedy.
We sew a mattress into a stroller
The desire of all loving and caring new parents comes down to one thing - the health and comfort of the baby. Mothers certainly want to provide only the best conditions for their child, especially during walks in the fresh air. Parents purchase pillows, rugs and blankets, toys, mosquito nets and other equipment.
During summer walks, it is important that the child does not get too hot. Due to stuffiness, lack of humidity and, as a result, increased sweating, the baby's skin may develop prickly heat (a red rash that resembles irritation). But during winter walks, adults never cease to worry about the child not freezing. No matter how warmly you dress your child, the stroller in which the baby will be will still be cold (especially the lower base). Many mothers cover the bottom of the stroller with a blanket or blanket. But during walks, the child turns around, and the covered fabrics move and crumple. In addition to the fact that folds are formed that interfere with sleep, the heat in the stroller is not retained. Children from such bedding not only experience physical discomfort, but can also become hypothermic and, as a result, get sick.
To avoid unpleasant consequences, experienced parents and pediatricians recommend using a mattress for walking in a stroller. The only condition is that for summer and winter walks these must be completely different mattresses. For warm weather, you should choose a lighter cotton-based option, and for the cold season, a thicker, printed option is suitable.
Not all young parents can afford to purchase two different accessories at once. And finding exactly what will completely satisfy the needs of mother and baby is not so easy. That is why we suggest, using a simple master class, to sew a mattress with your own hands. Only in this case will you be confident in its quality and convenience.
Mattress for sleds - review of factory models and how to make it yourself
Snowy winter is a time of special children's joy and impressions. A sled is simply a necessary winter accessory for a child. It’s easier in this regard with older children. They need sleds mainly for active games and sliding downhill. As for kids, in winter the sled serves as a stroller. To make your baby comfortable and you calm, you need to take care of their insulation. What does the range of ready-made models offer? How to make a mattress with your own hands?
Sled models
The model of the mattress (it doesn’t matter whether we are talking about purchasing a finished product or sewing it yourself) dictates the model of the sled. The range of children's sleds today has expanded significantly.
The seat and back of a light, compact folding sled, reminiscent of a chaise lounge, is a ready-made mattress - foam rubber, covered with waterproof fabric.
For longer walks, you should look for a model that comes with an envelope for insulating your feet, or consider an elevated option - a sled-wheelchair.
A sled with an aluminum frame, sheet steel runners and multi-colored planks is a classic version, known since the times of the USSR. Wooden, wicker and plastic models are also on sale - domestic and foreign brands, budget and high-tech. All these options require additional insulation with a mattress.
Ready-made mattress models
The advantages of ready-made models are obvious. There is no need to waste time searching for filler and covering material, making measurements and calculations, making patterns, fittings and, in the end, sewing. Ready-made models are a well-developed form, thoughtful design and functionality. The range of finished products includes very elegant, original options.
For most models of sleds with a backrest, so-called universal models of mattress inserts with fastenings in the form of ties and Velcro are suitable.
For non-standard sled models, individual covers are sewn that are ideal only for a specific sled model and do not fit well into others.
What are the general principles for choosing materials for making sled mattresses? The use of durable, windproof covering fabric and the presence of insulation. The range of models begins with very simplified options such as felt inserts, continues with sheets that soften the surface and partially insulates from the cold, to solid envelopes - in the version for the little ones (in some cases even with a visor).
What materials do manufacturers usually use to make sled mattresses? Wool, holofiber (siliconized polyester fiber, also used as insulation for winter clothing), and polyurethane foam (foam rubber) are usually used as filler. Manufacturers use thick calico, water-repellent fabrics, faux fur, printed sheepskin, and fleece as fabric for the top (covering).
We sew a mattress for a sled with our own hands (master class, photo)
We sew a mattress for a sled with our own hands (master class, photo)
Sleds are the most common type of winter children's transport, which is very popular with both children and adults. Nowadays there are various accessories for sleds in stores, for example, a sled mattress. Depending on the chosen material, it provides softness, windproofness and warmth, which is very important, because during this winter period parents want to protect their child from colds. You can sew such a mattress for a sled yourself.
Mattress for sleds
To make such a mattress, we will need: fabric (I took raincoat fabric), threads in the color of the fabric, padding polyester (or foam rubber) and Velcro for fasteners (you can do without it - with ties).
Necessary materials Cut out 4 pieces from fabric: 2 pieces measuring 110x22 cm (for the sides of the mattress) and 2 pieces measuring 50x33 cm (for the mattress itself).
We cut out the parts from the fabric. First, we take smaller parts, put both parts together and sew them from the wrong side on 3 sides, inserting ties in certain places (I sewed 2 in the front on both sides, but you can also have one in the middle). We turn the product inside out, cut out a rectangle measuring 46x29 cm from padding polyester or foam rubber and insert it inside (if you use padding polyester, it’s better to take 2-3 layers).
We sew a mattress Mattress We make straps (ties) in the same way as shown in the photo.
We sew straps (ties) Then we take 2 pieces 110x22 cm and also sew them from the wrong side, inserting 3 straps (ties) between the fabric. We cut out a piece measuring 107x19 cm from synthetic padding or foam rubber and also insert it inside the future sides of the mattress. Parts for the sides of the mattress Sew the sides Then, we sew the mattress with the sides together, not forgetting to sew the straps in the right places (I sewed 2 more pairs of straps at the bottom back), and sew Velcro onto the straps. By the way, to prevent the padding polyester from rolling up inside, you need to sew it on top with fabric (you can see it in the last photos). Velcro straps I got this mattress with sides for a sled. Straps 2 in front, 2 on sides and 3 in back (1 on top and 2 on bottom). Mattress for sledding Rear view Recommended material for you
See also:
Rate a homemade product, a master class, an idea. Comments
Baby's age
Usually, people start purchasing sleds when the baby is a year and a half old. Much depends on what age it is in winter. Of course, none of the caring parents would dare to put a child in a sled at six to eight months, but at eleven or twelve it is quite reasonable and advisable. At this moment, the baby has a need to explore the world around him, and he needs to be given such an amazing opportunity. You will see with what enthusiasm he will ask for subsequent walks.
Do-it-yourself mattress in a sled
In the snowy winter, kids happily transfer from strollers to sleds. And here the question arises about the insulation of these very sleds. The choice of mattresses in stores is small, and choosing by color, quality, price, and size is not always possible. Therefore, I suggest you sew a mattress into a sleigh with your own hands: it will not only make winter transport as warm, soft, and comfortable as possible, but will also serve as decoration for it.
How else can you decorate a sled? Follow the link below to find our detailed master class, which shows how to decorate a children's sled using the decoupage technique.
Versatility
This product can serve as both a sled and a stroller. This combination allows you to significantly save money. It is known that young children get tired quickly after a year. If your baby falls asleep in a sled, nothing bad will happen: he will be warm, comfortable and calm there. And mom will be able to enjoy the walk without unnecessary worries. By the way, the winning point is that modern designs are made in such a way that a woman rolls both a stroller and a sled in front of her. This position is dictated by the principle of security. A mother should always control her child and be able to make sure that he is nearby.
A sled-stroller with retractable wheels allows a woman to do all her chores and walk with her baby without any difficulty. And at the same time do not use anyone’s help.
Step-by-step work on making a mattress for a stroller
As you may have noticed, sewing a mattress into a baby stroller yourself is not at all difficult. You just need to spend a little time and effort - and your useful accessory is ready! If desired, you can sew several removable covers that can be washed when dirty.
And to make it not only comfortable, but also fun for your child to ride in a stroller, you can use photos of ready-made author’s works to make a funny mattress-toy.
Such a soft accessory will not only make you stand out among young mothers, but will also demonstrate your creative skills. After all, you can sew a cozy product for a stroller in the form of a child’s favorite hero or make a personal inscription. This item would also be a great gift for a newborn.
I like 0 Similar posts
Ease of use
A sled with retractable wheels is quite light, so a modern woman will not have any difficulty in dragging it from her apartment to the street. If we take into account the fact that a small child often has to be held in our arms, then this is a powerful argument in favor of their choice. Sleds require minimal maintenance; you don’t need to devote a lot of time and effort to this. Mom can significantly save her own energy costs. The modern rhythm of life requires a person to be very immersed in the business sphere, so there is very little time left for everything else, including family.
This, of course, is extremely sad, but nothing can be done: you have to adapt to the existing conditions. The convenience of using a sled on wheels is undeniable: you don’t need to choose snowy days for walking. The product itself does not require special treatment. There is no need to worry about the sled or take unnecessary care of it. After a walk, it is enough to rinse them with tap water or wipe them with a damp cloth.
DIY foam sled
It’s a pity to throw away the polystyrene foam from household appliances right away, and it moves to the balcony. To prevent valuable material from lying around useless for a long time, try riding on a homemade foam sled. In cold weather they are warm to ride on.
It is enough to cut out a streamlined outline with a sharp knife and punch holes for the rope. Even if these are disposable sleds, they will cost practically nothing.
Another option for free sleds is made from plastic bottles. It is enough to wrap the required amount of empty containers with plastic film, four or six pieces at a time, and put them in a large plastic bag or greenhouse film. Seal the edges with an iron and ride to your health.
Install runners made from a metal corner, plastic pipes or old skis on the stroller, which is possible even without removing the wheels. Riding such a sled from a stroller in winter is much more convenient.
Do you have old skis lying around? Don't rush to get rid of them! If they haven’t fallen into disrepair, it’s time to make a pair of sleds from skis with your own hands.
All you need is a little skill and some additional materials. By making a sled from old skis, you can save a lot of money.
Briefly about the creation of such a sled - a corner is stuffed onto the ski runners, a seat is attached on top, to which a rope is tied.
Timka sled with retractable wheels
This is one of the most common models. They cost about three thousand rubles. It is very convenient for a child to be in them: the sled creates a feeling of comfort, and can be easily washed in warm water using regular soap. The presence of wheels will allow the mother to safely go into stores with her child, and for this she does not need to take the baby out and pick him up! The sled is perfectly adjustable in any position. In addition, you can adjust the pusher handle in such a direction when the baby is facing the mother, and in the opposite direction.
