Get inspired by ideas and make your own refrigerator magnets

A handmade craft is filled with the incredible positive energy of the master, his mood and good thoughts. This means that a home refrigerator magnet, made with your own hands, will become an emitter of warmth, kindness and positivity. They make it funny for a friend, for parents - with words of gratitude, for a loved one - with a declaration of love.

But not everyone knows how to make a refrigerator magnet with their own hands at home. It’s easy to make, the main thing is to have the desire and follow some rules.

How to make a magnet with your own hands

First, you need to come up with a theme and idea for the future magnet. Next, decide on the choice of magnet holder:

• ferrite - a hard magnet, round or square, will last 10 years, suitable for products made of light materials;
• vinyl – soft, produced in the form of a flexible plate on which a thin layer of glue is applied; used for small weight crafts;
• neodymium - withstands loads, does not lose its properties for decades, suitable for crafts with filling.

In order for the product to hold well, the adhesion force of the magnet must be 2-2.5 times the weight of the souvenir. It is not necessary to buy a magnet; you can use an old one.

Required tools:

• brushes for glue and paints;
• glue intended for gluing plastic and wood;
• scissors.

Additionally, you may need a glue gun, a knife, and a measuring tape. If you need to sew parts onto a craft, you will need a needle and thread.

Armed with the necessary tools, they get to work. Then everything depends only on the imagination of the master: you can make an exclusive thing from any available material. You can work in any direction, knowing the basics of making crafts.

Advice! Crafts made in the same style look better.

"Live" magnet made from cork

Make a hole in the wine cork with a knife, being careful not to damage the walls. A magnet is glued to the cork.

When the glue has dried, dry soil is poured into the hole and a small shoot of the plant or its seed is planted and watered.

Hang the magnet on the refrigerator on the sunny side. When there is not enough space for the plant, transplant it into a pot, and a new seedling is planted in its place.

Advice! Lately, growing microgreens has become fashionable. It is convenient to germinate wheat, lentils and barley in a cork.

Flower bouquet

In a craft store they buy flowers, leaves, curly branches and make a composition:

• Option 1. A frame for a future basket is cut out of a small calendar. Corrugated cardboard is glued onto it and painted with acrylic paint. A bouquet is created on the basket by attaching decorations. Foamiran is glued to the back side, and magnetic vinyl is placed on it.
• Option 2. Instead of a basket, a tree trunk is cut out of cardboard, painted with acrylic paint and varnished. The crown of the tree is decorated with flowers and leaves. When the glue dries, glue a strip of magnet onto the craft. If the bouquet turns out to be heavy, use a ferrite or neodymium magnet.

Flowers are also made independently. Using stamps, cut out petals and leaves from polymer clay or salt dough. After drying, the dough products are painted and varnished. Polymer clay is selected according to the desired color.

Lesson #7

If you use vacation photos to create such magnets, they will become an excellent alternative to standard magnets with landmarks from different countries.

You will need:

• white cardboard (you can also use a thick cover from a notebook or sketchbook);
• stationery knife;
• metal tape measure/triangle;
• clear adhesive tape (you can also use a special glaze for paper, but we recommend that you first check that the photo print will not spread if it is slightly wet);
• magnets or magnetic tape 2.5 cm wide;
• photo editing program (Photoshop, Pixir or any other. You can also create a template in Microsoft Word or Paint);
• photo paper;
• spray adhesive;
• Printer.

1: If you use Photoshop, first download the template or draw it yourself. And if you are going to work in any other program, then draw a Polaroid frame yourself. Place the selected photo outside the frame and reduce it to the required size. The size of the photo frame is 10 x 15 cm. It should look like this:

2: Print your edited photos on photo paper. Spray glue on the cardboard and the back of the photos, wait about 1 minute and glue them together. Place a transparent film on top to protect your photos from dust.

3: Use a utility knife to trim the edges. Use a ruler to ensure the corners are straight. At the same time, do not try to cut off the excess paper in one go - it is better to run along the same line several times, without pressing the knife too hard.

4: If you use magnetic tape, then cut it into pieces of the required size and stick them on the back of the photos.

Place the finished magnets between the books and leave overnight so that the glue is evenly distributed between the layers.

Magnets from caps and discs

CDs that are no longer needed will find a second life as decoration. A picture with a still life is glued to the surface of the disk, and a vinyl magnet is glued to the back side. You can paint the disc yourself. To do this, clean the surface with sandpaper, paint and draw.

Tin lids and crown caps are excellent materials for decoration. A photograph, landscape, words are inserted inside the lid. A magnet is glued to the back side, and the lid is varnished or painted.

If you glue the lid with the convex part up, first drawing cute faces on the surface, they will amuse others with their cool appearance.

Master class No. 3

You will need:

• polymer clay;
• rolling pin (or smooth bottle);
• various stamps, as well as an ink pad;
• baking molds;
• sandpaper (a nail file will also work);
• magnets;
• hot glue gun.

Using a rolling pin or bottle, roll out the clay to form a sheet approximately 5mm thick. Apply a pattern using a variety of stamps. Then take baking molds and cut out figures from clay.

Leave the clay to dry for about a day (or dry it in the oven). After this, polish the uneven areas with sandpaper. Glue the magnets.

Magnetic bags

A nice bag is made from thick fabric, filled with filling for volume, and tied with a ribbon. There is no need to glue the magnet to the bag; it is placed inside. The outer side is decorated with applique, beads, or a coin is glued on. This refrigerator magnet can be used as a talisman or to attract wealth.

Lesson #1

You will need:

• round magnets with a diameter of 1.25 - 1.75 cm;
• glass circles of the same diameter;
• glue;
• funny pictures (circles with pictures can be cut out from old magazines).

All you need to do to make these cute magnets is glue pictures onto the magnets and glue glass circles on top (you can buy them in special craft stores).

Tip: To prevent a dark magnet from showing through thin newsprint, we recommend that you cut out circles of a suitable size from thick white paper and glue them between it and the picture.

"Coffee" magnets

There are countless ideas for creating a magnet from coffee beans and it’s easy to make. The basis is fabric, paper, wood or polymer. Cut out the desired part and glue coffee beans onto it.

As an option, they make an animal figurine, a heart model, or a photo frame.

Master class on creating the simplest “coffee” magnet:

1. A heart template is cut out of cardboard. If made from plain paper, several layers are glued together.
2. Glue the magnet in the center of the figure.
3. Wrap the heart in fabric, gluing its edges.
4. The product is tightly covered with coffee beans and covered with a layer of varnish.

The original “coffee” magnet is decorated with a bow and a beautiful souvenir is ready. For a friend who can't imagine a morning without a cup of coffee, this would be a great gift.

Photo gallery of ideas

In this photo gallery you can find other original ideas for crafts made from magnets that you can easily make with your own hands from available materials.

Support the project - share the material with your friends on social networks:

Wooden magnets

After your baby enjoys the ice cream, there is no need to throw away the stick. Once you have a few of them together, you can make a nice little house.

Sequence of making a house:

1. Cut out the desired piece of cardboard. It is better to take cardboard, which is used in scrapbooking. If this is not the case, take regular cardboard, cover it with colored paper and paint it with paints.
2. The roof, body and pipe are cut out separately.
3. Cut out a window of any shape.
4. Glue all parts of the house onto a paper base and paint it several times.
5. A fence is constructed from wooden sticks and glued to the body of the house.

Finally, decorate the façade of the house to your liking and glue a magnet to the back side.

You can make a simpler wooden magnet. An image of any silhouette is applied to a piece of wood of any shape through a stencil. A black lacquered silhouette will look interesting against a light wood background.

How to make cool refrigerator magnets with your own hands

When creating cool magnets, the main condition is observed - they must be positive, amuse others and lift their spirits.

In a craft store they buy a small figurine, insert a funny inscription into its hands, attach it to a magnet and hang it on the refrigerator. You can sew the figurine yourself by cutting out the parts and filling them with cotton wool. It is not necessary to adhere to anatomical proportions; the funnier it is, the better.

This set of grannies will bring a smile to everyone who sees them. Each figure is given a facial expression according to their imagination. They are made from salt dough, painted and varnished. A “flock” of grannies is glued onto a flat surface, and a magnet is attached to the back. They can be hung in any order, then a magnet is attached to each grandmother.

Method six: oh, this is amazing Lego

To make a bright, colorful and functional souvenir, select your favorite parts from the construction set, prepare the required number of magnets and a hot glue gun.

The creation process is simple: you need to glue the part to a magnet. However, it is worth considering 2 important factors:

• DO NOT use magnetic tape. She is weak to hold the cube. Such a magnet will not last long.
• Hot melt glue can be replaced with super glue.

• 
  Legal and accounting assistance for your business

• The magic of photographs.

• Unusual and successful table setting using a table setting

It should be said that this product must dry for at least 24 hours. Such a bright magnet can be used not only by adults, but also by children.

Magnetic board for refrigerator

Some people not only want, but don’t even know what it is – a magnetic board. Moreover, they don’t know how to make a magnetic board for the refrigerator with their own hands.

A magnetic board on a refrigerator is a stylish fashion accessory that will not only complement the interior, but also has practical value. They write messages to each other, reminders, wishes on it. It becomes an indispensable element in the house, since family members communicate through it without being able to be together often. This board is also suitable as a gift.

It’s easy to do and the work won’t take much time. You can choose any template for the board - from a classic rectangle to the most bizarre patterns.

For production you will need:

• a large sheet of thick paper (whatman paper will do);
• vinyl-based magnet (it is sold by the meter in printing houses or advertising companies);
• transparent plastic (sold in the same place as the magnet).

Draw and cut out the desired template on a sheet of Whatman paper and paste it onto a vinyl magnet. If a human or animal figure is cut out, draw eyes, nose, and mouth with a marker. If necessary, paint in the desired color. Plastic is glued onto the paper; it is better to do this with tape along the edges of the figure.

That's the whole simple process. The finished board is hung on the refrigerator, written on it with markers, and erased with a regular flannel cloth. To erase records, a special sponge is sold that is attached to a magnet.

You can also make a world map board and hang all the magnets you purchase on your travels on it.

Making decorative magnets has many advantages:

• there is where to use your “golden” hands;
• joint creativity brings the family closer together;
• allows you to make changes to the interior at any time, you can do it every day.

The main thing is that the process is exciting, there is freedom for imagination and you can feel like a real designer.

Watch this video on YouTube

Magnet basket/DIY gift/March 8/Basket Magnet/DIY

Watch this video on YouTube

Do you want to understand better than others?

• Do-it-yourself magnets: how to decorate a household refrigerator - Refrigerator magnets are one of the most common ways to diversify the appearance and add personality to kitchen appliances. The souvenir shops offer a large…
• Is it possible to hang magnets on a household refrigerator? Many people, when traveling to other cities, buy magnets with images of various attractions or their photographs. Such souvenirs became widespread due to...
• How to keep lemons fresh at home - Thanks to the piquant taste of lemon and the presence of many beneficial micronutrients in its composition, it is a common ingredient in various dishes and drinks. Many even grow...
• How to prepare beets for the winter at home - Freezing is perhaps the most rewarding way to prepare vegetables for the winter. Firstly, it is very simple and quick (as opposed to conservation, which involves standing at the stove for a long time)….
• 13 unusual but effective ways to remove stickers from a refrigerator - Removing stickers from a new refrigerator is not as easy as it seems at first glance. Sometimes it takes a lot of effort to get rid of glue. We will share with you...