How to make a train with a motor and a remote control from cardboard and lids?

Do you want to go on a trip? It's time to fold an origami train out of paper. Psychologists advise visualizing your dreams so that they become reality. Trains are especially popular among romantic types - you can not only move from point A to point B, but also admire the views flashing outside the window, communicate, and experience a keen sense of anticipation of adventure. These exciting moments will involuntarily be remembered when creating a paper origami model. And there it’s already a stone’s throw from a real train.

Cardboard train template. How to make a train from yogurt cups with your own hands

• Many people have probably seen or even bought trains for their children, or maybe even entire railroads as toys for their beloved children.
• What if you try to make a train with your own hands?
• Materials for making a train:

1. Wooden block 50*50 or 100*100 at your discretion. length from 50 cm;
2. Pieces of wood (we use pine, oak) details below;
3. Sanding paper;

Tools for making a train

:

Electric drill + preferably a milling machine or engraver;
• Clamp or vice;
• Set of chisels;
• Grinding machine or grinding machine;
• Drills + feather drill + cutters;

Pencil.

Making a train

1. The initial stage of manufacturing a steam locomotive
2. Prepare a wooden block measuring 50 * 50 mm or another larger size.
3. Using a compass, mark a semicircle along the end of the block on both sides.

Leave your comment

✅ Balance of classes - 1

Responsibility for resolving any controversial issues regarding the materials themselves and their contents is taken by the users who posted the material on the site. However, the site administration is ready to provide all possible support in resolving any issues related to the work and content of the site. If you notice that materials are being used illegally on this site, please notify the site administration using the feedback form.

All materials posted on the site were created by the authors of the site or posted by users of the site and are presented on the site for informational purposes only. Copyrights for materials belong to their legal authors. Partial or complete copying of site materials without written permission from the site administration is prohibited! The opinion of the administration may not coincide with the point of view of the authors.

Source

Ready-made templates for cutting

This technique for making crafts has its advantages - it saves time, plus you don’t need experience, the ability to draw and work with folds and modules. The disadvantages are obvious - the lack of opportunity to personalize the craft, to show creativity, and such a locomotive is unlikely to be appreciated at an exhibition or competition.

However, ready-made templates can come in handy. All you need to do is print it on a color printer, cut out the parts and glue them in the correct order. And for creativity, you can circle these parts on a white sheet and draw your own version on it.

DIY application “Locomotive” made of paper for children step by step with photo. Templates

Description: making crafts from paper and cardboard using the applique technique is a very exciting activity. In this type of creativity there is room for your imagination to run wild! Three-dimensional applique expands the creative possibilities of children's works, helps teach a child to think spatially, three-dimensionally; children perceive three-dimensional images better than flat ones. The word applique comes from the Latin “applic”, which means attaching or joining. The appliqué technique is very simple and accessible even to the smallest children, because gluing the parts onto the base is not difficult at all.

Purpose: this master class is easy to perform, intended for teachers, educators and parents, as well as for children of preschool and primary school age in classes in kindergarten, school and summer camp. Creative work can be used to decorate a school office, a group in a kindergarten, a home room, for participation in exhibitions and competitions, and also as a gift.

Applications

Method No. 1

For children who are just learning how to make appliques, a simple train is perfect. You need to prepare:

To make it, you just need to cut out 3 rectangles, cut off about a quarter from one of them, cut out the windows, make wheels and glue the pipe.

Method No. 2

For older children, an applique is suitable, which involves up to 6 different colors depending on the creative idea, plus you need paper to create a background, scissors, a glue stick, as well as skills in cutting out small parts.

Making a bright locomotive for the soul or for a competition is not a problem. You just need to choose a suitable master class, stock up on the necessary materials and patience.

Metro

This drawing is quite quick and easy if you follow these instructions:

1. First of all, mark the working surface of the paper, and then you can start sketching the locomotive;
2. Next, start working on the front side of the train. This includes the headlights and lower part;
3. From the vanishing point, draw several rays that also indicate the trailers. Doors, windows and other elements should be drawn in them;
4. After this, again from this point draw several rays to draw the road and station platform. The train that travels in the metro is not separated from the station, which means it is worth paying more attention to it;
5. At the very end, after all the above steps have been completed, you can think through the surroundings, carefully draw everything, and then decorate the resulting creation.

Now you know how to draw a train and you can teach it to your child. By drawing together, you will get a lot of positive emotions and have fun.

Option

We offer a second option for making a paper locomotive. Take a sheet of A4 paper and bend it one cm on both sides. Place the ruler with its left edge on the bend and bend it one more time. A total of four folds need to be made.

After this, we cut off the excess part of the sheet, then fold the edge of the paper, stepping back from the left edge by one cm, then fold the paper on the opposite side of the ruler.

Cut off the excess paper. Then we cut the edges as shown in the photo.

We glue the side parts of the square together, and then cut off the main part of the booth to the width of the ruler on the right side.

Then glue the edges of the long strips together. We glue the roof to the post.

Then we cut out small squares measuring 2.5*1.5 cm for the window. And for the door we cut out a square 7*2.5 cm.

Glue the square into a tube. We glue windows and doors.

Read this: Mother's Day Poster to Congratulate Loved Ones

A small pipe is glued in the center of the large pipe. A small piece of a square in the shape of paper is glued to the free edge.

We cut out a strip measuring three by seven cm. Use scissors to twist the edges of the strips so that we get a figure eight.

We make circles for the wheels.

We cut off the excess edges of the square, then glue the wheels and figure eight, as shown in the photo.

Then we make the car using this method.

Glue the car to the figure eight.

This is the train we have ready.

The last step in our article is to look at photos that show diagrams and templates for making a train.

Presentation on technology on the topic “Car Building Plant”

ENTERING ANSWERS IS AVAILABLE

Description of the presentation by individual slides:

The first designs of passenger cars resembled the body shape of carriages or postal stagecoaches built in previous years; The wheels in the chassis began to be made with a flange (ridge) on one side to prevent them from derailing.

Soviet period carriages

Carriage-building plants Tver Carriage-Building Plant is the only enterprise in Russia that creates various types of locomotive-hauled passenger cars for speeds up to 200 km/h.

Main products: freight cars

Main products: tram cars

Main products: military equipment, railway cars, road construction machines

Sources Author of the presentation template: Maletin O.V. https://studopedia.ru/ - history of carriage building

Inclusion in modern society and its role in socialization

Registration in progress Broadcast today!

This presentation will introduce students to the first designs of passenger cars. They will compare carriages made in Soviet times and modern ones. The presentation shows some Russian carriage factories and what they produce (Tver, Tikhvin, Ust-Katav, Ural plants (military equipment)).

Simple origami diagram for children

You can quickly make such a locomotive even while you are in line or on public transport with your child. It is enough to have a square piece of paper with you. At home, you can take one-sided colored paper in blue or light blue to simulate a modern high-speed train.

1. Fold the square in half from top to bottom.
2. Fold the bottom edges about 1-1.5 cm.
3. Fold the top left corner inward. So, the simplest model is ready.
4. To make it more recognizable, it is worth drawing windows.

Craft Ice Cream Van | Country of Masters

My third-grader son was asked to make an Ice Cream van for the holidays. I had to help - I made a sample... The work of Mary Poppins helped me get my bearings https://stranamasterov.ru/node/688112 In the workbook on technology, we took the diagram of the cabin (see below), and made the body out of a cube (we found the diagram of the cube on the Internet). The edge of the cube is 6.5 cm.

I was more interested in decoration - inscriptions, voluminous headlights..., and my son - in functionality))) He wanted the wheels to spin.

The son repeated all the work step by step and his van turned out no worse. Moreover, he still made the wheels of his van spin.

I placed the juice caps on a plastic tube (you could use juice or a stick for balls) and secured them inside with plasticine.

In the workbook (Technology 3rd grade, Rogovtseva N.I.) there is a diagram of the cabin.

I hope my brief job description is useful to you.

stranamasterov.ru

How to make a train from plastic cups for kindergarten: step-by-step instructions

Maybe it’s worth refreshing your memory and listing famous cartoon characters? Who knows Tishka, Chukh-Chukh and other engines?

Children will have fun working on creating an express train out of plastic cups. Please note that there are no longer any vacancies. This means that the route is popular.

So, to make crafts you will need:

1. - plastic yoghurt cups;
2. - PVA glue and superglue;
3. - caps from plastic bottles;
4. - colored paper;
5. - cardboard;
6. - scissors;
7. - toy eyes;
8. - Kinder Surprise egg container.

The first step in decorating the craft is desirable, but not required. In general, it would be a good idea to hide advertising labels for cottage cheese desserts and yoghurts. To do this, you need to cut strips of colored paper with a width equal to the height of the cups and cover the labels with them.

The carriages will look more attractive in a toy passenger express train.

At the next stage, you need to make wheels for the locomotive. Using PVA, we glue two caps unscrewed from plastic bottles to a cardboard strip measuring 1cm x 5cm. The number of parts is calculated independently. It all depends on the number of cars that are planned to be connected to the main booth with the driver.

All that remains is to attach the wheels to the cars and wait a few minutes until the glue dries completely.

To create a booth with a driver, you will need three cups. In two of them, you will have to cover the labels with red paper as standard and cut off the protruding edges. Glue toy eyes to the white cup.

It's time to connect the finished parts of the locomotive.

Something is missing from the picture. Probably a chimney.

To create the desired part, a plastic container from a Kinder Surprise and a lid are well suited. It is better to glue plastic with superglue. Here you will have to call your parents for help.

Let's add an element to the base of the craft. By the way, don’t forget about the wheels for the booth. They are made in advance. The process is no different from the described sequence of creating wheels for trailers.

Do-it-yourself “Space Rocket” craft - Vector-success.rf

The DIY “Space Rocket” craft is intended for children aged 6-8 years. You can bring the craft to class or decorate your collection of works.

Materials and tools

Colored paper	1 yellow sheet
white cardboard	1 sheet A4 format
double sided red cardboard	1 sheet A4 format
glue stick	1
scissors
ruler, pencil, compass

How to make a “Space Rocket” craft with your own hands? Step-by-step instructions for children and adults.

1. Prepare colored paper, a sheet of white cardboard, a sheet of red cardboard, glue, scissors, a ruler, a pencil, and a compass.

2. We make markings measuring 15x13 cm on white cardboard and cut out a rectangle.

3. Roll the resulting rectangle into a cylinder so that the height of the rocket is 15 cm.

4. Glue the ends of the rectangle and press firmly. The result is a cylinder - a blank for our rocket.

5. Cut out 2 strips measuring 4x1 cm

.

6. Take a compass and draw a circle with a diameter of 3 cm on white cardboard.

7. Cut out a circle with scissors and make a cut to the center of the circle.

8. We weld the circle so that we get a cone and glue it together.

9. Cut out 2 strips of white cardboard measuring 4x1 cm and glue them to the cone on opposite sides.

10. Take yellow colored paper and cut out 3 circles - these are the windows of our rocket. Glue them in a row from top to bottom.

11. Take a sheet of red cardboard and mark a rectangle measuring 8x6 cm. The cardboard should be double-sided. Cut diagonally.

12. At the greater height of the resulting triangles, we bend 0.5 cm for gluing to the rocket body. Apply glue and glue.

13. First, glue the rocket wing on one side so that it is flush with the bottom of the rocket, and then the second wing on the opposite side.

14. The DIY “Space Rocket” craft is ready!

Kurushina Nellya Nikolaevna (a21vu_1347)

04/15/2017 4325

21vu.ru

Modular version of origami

Way

Such a design will only be possible for those experienced in modular origami or several people; it will take a lot of time, but the result is grandiose. In addition to paper, you will need a small piece of wire, glue, wooden axles for the wheels and the same base. Detailed assembly diagrams are shown in the photo below. First you need to prepare the required number of modules of different sizes.

Step-by-step instruction:

1. For pipes you will need red modules of two sizes - 1/64 and 1/128 A4 sheet. The two shortest pipes of the eight rows are made up of 254 pieces of the first type. The longest of the 21 rows consists of 252 small modules and its fastening of 8 large ones.
2. The spotlight consists of 96 large modules - 66 red and 30 yellow.
3. For the boiler you need 756 blue parts of size 1/16A4, 175 of the same white and 20 pieces of 1/32 blue for fastening.
4. The star on the boiler requires 50 red 1/64A4 parts, 5 of which are useful for connecting to the boiler.
5. For large wheels you need 30 pieces of white 1/16A4, 70 of the same red, 40 white 1/64A4 and 20 red of the same size.
6. Small wheel – 30 white 1/64A4, 50 red same and 40 white 1/128.
7. Base – 776 blue 1/64A.
8. Cabin - 231 blue 1/16A, 14 1/32 of the same color and 16 1/64A4.
9. Cabin wing - 385 red 1/16A4, 104 1/16A4 of the same color, 50 blue 1/16A4 and 50 1/32A4.
10. Drive – 75 red 1/64A4.
11. Buffer – 13 red 1/4A4, 4 white 1/4A4, 1/8A4: 12 white and 15 red, 1/16A4: 20 white and 25 red, 1/32A4: 12 white and 41 red.

Way

The video below shows a version of a less detailed modular locomotive, consisting of convenient large parts.

Master class on making the “Jolly Train”

Anastasia Krasnoperova

Master class on making the “Jolly Train”

Master class “On making “ Jolly Little Engine ” with photographs of students.

: Anastasia Viktorovna Krasnoperova, teacher at MBDOU “Kindergarten”

Purpose: " The Jolly Little Engine "

, can be used by preschool teachers to form a group, as well as in direct educational activities.

Goal: making your own “ Merry little train ”

with photographs of kindergarten students.

3D model of a steam locomotive

Way

This train looks most impressive when combined with carriages and a decorated background. The advantages of the options, on the one hand, are in the simplicity of the design, on the other hand, in the ability to change the background “landscape” to illustrate the journey. To make it you will need:

• A4 colored paper. Depending on the size of the figure, take a whole sheet for the base or cut it to length. As a rule, the longer the train, the smaller its parts. You also need paper for window decoration;
• scissors, ruler, glue;
• colored cardboard, watercolors, felt-tip pens for creating a landscape.

1. Fold a rectangular sheet of paper in half lengthwise and unfold it.
2. Fold the right and left edges to the middle.
3. Straighten the structure and glue the workpiece.
4. Cut out rectangular or square windows from paper of a different color and glue them to the carriage. You can glue figures of people and animals into the windows.
5. To decorate the cabin of a steam locomotive, take a small rectangle, fold it in the same way and glue it on top.
6. A paper tube is also added.
7. The wheels are cut out of black and white paper, or preferably cardboard, and glued at the same level at the bottom of the cars.
8. In this case, a sheet of Whatman paper was used for the landscape; cardboard would also work. For decoration, just cut out more small circles from double-sided colored paper, folding the sheet several times. They are folded in half and the desired shapes are created.

Way

This option couldn’t be simpler, and it’s also collapsible. All you need is a paper towel or toilet paper roll, cardboard, scissors, pencils or markers.

1. Draw a steam locomotive on cardboard or thick paper, color and cut out.
2. Cut 2 cylinders 3 cm wide from the sleeve.
3. Make a half-thick slot in the middle and insert a cardboard locomotive into it.

Using the same technology it is possible to equip it with carriages.

Way

Such a simple model will require skill and accurate measurements. The base of the locomotive is still the same bushing, only this time it’s intact. In addition to it, you need paper, pencils or markers, scissors and glue.

1. Place the cylinder on its side and measure the distance from the floor on one side to the floor on the other using a flexible measuring tape or using a thread and ruler.
2. Also measure the approximate height of the cabin and pipe.
3. Using these data, draw the parts of the locomotive, leaving a small margin for gluing, cut and assemble.

Maglev

China and Japan boast flying trains that compete with airplanes. The innovative transport, called “maglev”, does not have wings, but it has magnetic cushions for levitation above the rails. The lack of friction allows it to accelerate to 600 km/h in some areas - this is the speed of an average passenger airliner.

So far, maglevs are being tested at short distances to determine the optimal performance of the electromagnetic field. After all, the trains are heavy and require high power to levitate them. However, in a few years, superhigh-speed highways will appear in Japan that will connect the country's capital with the largest cities - Osaka and Nagoya.

The magnetic levitation train is easy to fold using the origami technique. To do this, you will need a square of paper with one white side and a marker.

Step-by-step instruction:

1. Mark the middle of the square.
2. Fold the bottom and top edges ¼.
3. Fold the workpiece in half into a “mountain”.
4. We bring the upper left corner inside the figure.
5. We bend the lower points.

We draw the windows and cabin of the train.

Option from diapers

Young mothers will definitely appreciate such a gift, because diapers are always useful when there is a one-year-old child in the house.

• diapers (20 pcs.);
• elastic cord;
• rubber bands for money (22 pcs.);
• corrugated paper;
• skewer;
• satin ribbons;
• stapler;
• glue;
• pins.

To begin, roll the diapers into a tube.

To prevent them from unwinding, secure them in the middle with an elastic band for money.

Make sixteen tubes.

Tie two tubes together, then attach the next ones to them, wrap each one in a circle.

On a note! If you just tie them with an elastic band, they will curl up and will not lie flat and neat.

Then press the cardboard on top of the diapers so that the outermost diaper does not lift up.

We tie it with a ribbon. You can use any tape as it will not be visible.

Let's move on to the frame of the locomotive. Tie two pairs of tubes together with rubber bands and place them on crepe paper.

Pack the diapers in paper and glue or staple the seams. Then cut the cardboard so that it does not stick out from under the frame. Secure it with ribbons, first trying it on the wheels.

Make a pipe for our locomotive. Wrap one diaper in crepe paper and glue it on top and at the seams. Insert a tube from a sheet of office paper inside the diaper. It can be replaced with a skewer.

Using a narrow knife, make a hole in the paper between the two diapers and insert the tube.

To make a train cabin, fold four diapers in half and stack them on top of each other.

Wrap in paper.

Place the cabin on the locomotive and secure with pins or glue.

For the carriage, make two pairs of knitted diapers. If desired, you can make trailers from cardboard.

Make another trailer, but smaller. Secure all parts with satin ribbon. The diaper train is ready!