Beautiful DIY decoupage of a wedding champagne bottle

Useful tips

If there is a holiday, be it New Year, birthday, February 23rd or March 8th, it is most likely that on the table there will be a familiar thick green bottle with a sparkling drink inside.

Sometimes you want to decorate the table, and you can do this in an unusual way by decorating a bottle of champagne with your own hands.

You can try a method called decoupage of champagne bottles - a technique that involves transferring an image onto the surface to be decorated.

For example, a pattern that you cut out of paper napkins, thin fabric or other materials is attached with glue to the product that you want to decorate. Next, it is covered with several coats of varnish.

Finally you should have a pattern that looks nice on the piece without looking glued on.

Even if you don't have much of a gift for drawing, you may well be able to create beautiful decoupage of champagne bottles.

Champagne decoupage. Master class on the theme of spring

You can give such a beautiful gift to your beloved women or friends for their birthday or March 8th.

You will need everything that was used in the previous example, plus:

- ribbon (for decoration)

- White flower

- pearl

Start doing everything the same as in the previous example, with some changes.

On top of the decoupage you need to make a stained glass outline of flowers.

You can decorate the neck of the bottle with a ribbon, which in turn is decorated with pearls of different sizes. You just string the pearls on a string and that’s it.

The decor needs to be glued to the neck, and not just put on it.

You need to glue the glass pebbles along the tape.

Using napkins

Decoupage using napkins is a rather difficult process for beginners. It will take several attempts before you get beautiful products. You can use both regular paper napkins and special ones with thematic images printed on them. Profile materials are more expensive, but easier to handle, so it is better to use them for beginners.

Materials:

• bottle;
• napkin with a picture;
• brushes for glue and paints;
• priming;
• acrylic paints and varnish;
• PVA;
• fine sandpaper;
• sponge;
• decorative elements;
• alcohol or nail polish remover with acetone.

The first step in decoupage is surface preparation. Bottles are completely cleaned of labels, foil and glue.

To facilitate the process, you can place them in cold water for a day. After this, all stickers are removed, the surface is dried, checked and degreased, as in the photo.

The second step is to apply a primer to create the background. Use either construction primers or a mixture of acrylic paints and PVA. The consistency should be similar to honey. After drying, the surface must be checked for unevenness, and if necessary, sanded.

In the third step, the back layers are removed from the napkin, leaving only the one with the image on it. Afterwards, all excess parts are cut off, departing 2-3 cm from the picture. When the excess is separated, the distance to the edge is carefully reduced to 5 mm so that the transition between the backgrounds does not stand out.

The fourth step is to apply a translucent napkin to the bottle and cover it with glue. PVA is applied from the middle to the edges, using light brush strokes. Care will be required to avoid the formation of air pockets, otherwise when trying to flatten, the softened paper will spread.

The fifth step is to coat the dried bottle with varnish, in 1-2 layers.

The sixth and final step is to add outlines of glitter, rhinestones or other wedding decorations to the dry surface.

Universal decor

The combination of white and gold colors is considered wedding and is suitable for a celebration decorated in any style. This range gives positive emotions and emphasizes a joyful atmosphere. Decorating champagne bottles with gold and white ribbons is relatively easy. For this you will need the following materials:

• foam sponge;
• glue;
• gold paint;
• acrylic paint;
• primer mixture (can be replaced with white acrylic);
• rhinestones;
• white ribbons;
• gold leaf;
• twigs and leaves cut from gold paper;
• 5−7 polymer colors for each bottle.

Before the creative process begins, the artist coats both bottles with white acrylic or a primer mixture. Leave them until they dry, after which they begin to decorate. Instructions for decoupaging wedding champagne bottles with your own hands:

1. The neck and stopper are decorated with gold foil.
2. Golden branches with leaves are glued diagonally to the bottle.
3. The elements are placed taking into account the fact that later there will be polymer flowers in these places.
4. Glue the flowers so that the leaves are visible from under them.
5. The surface, free of decor, is painted with a thin layer of gold acrylic paint, scooping it up with a foam sponge.
6. The lower edge of the foil covering the neck is coated with glue, then wrapped with tape.
7. The edges of the ribbon are tied with a bow, and to hide the knot, a large semi-precious stone or several beads are attached.
8. A pattern of rhinestones is made on the neck.
9. The entire bottle is treated with a fixative.

Decoration with kanzashi flowers

Kanzashi is a technique that uses pieces of fabric folded in a special way. Most often, holiday flowers are made this way. Creating such decor is relatively simple if you use ready-made flowers. It is better if they are silver or pastel shades with a pearlescent tint. To decoupage wedding champagne you need to prepare the following:

• 7−9 flowers of different sizes;
• silver satin ribbon 2.5 cm wide;
• 1 cm thick ribbon to match the kanzashi elements;
• glue;
• multi-colored beads or rhinestones.

Unusual ideas

The design of bottles for the New Year can be completely different and depends only on the imagination of the master. For example, by choosing napkins with designs on a beautiful blue background, painting the rest of the bottle in the same beautiful “winter” shade and adding everything with snow-white details, you will get a very stylish, almost icy decoration. Crumpled paper will make some parts of the image three-dimensional: Santa Claus's beard, the edge of his suit and the snow underfoot.

This decor with an abundance of white is suitable for a classic champagne bottle, which does not even have to be decorated with the top golden part, since it will fit well into the planned picture.

New Year's bottles will become a real work of art if you additionally decorate them with artificial fir branches and berries or full-fledged artificial floral arrangements with toys, balls and pine cones.

Another stylish solution would be to use transparent rhinestones of different shapes and shades that imitate pieces of ice. The design of a wine bottle with an image of Santa Claus on a snow-white background can be completed by placing miniature red Christmas hats with a white pompom on the top.

In general, adding voluminous standard parts always transforms a craft. As an option, you should put a wooden fence made of flat planks along the bottom of the container, and attach garlands of light bulbs on top.

With fabric

It sounds very strange - decoupage with fabric. But it's actually a simple and beautiful way to create holiday bottles.

Materials:

1. Everything from the previous method.
2. A piece of cotton fabric 30x40 cm.
3. Disposable protective gloves.
4. 1-2 liter capacity, a container for construction paint works well.

The bottle is completely cleaned of stickers and degreased. Glue is poured into the container, the fabric is soaked and kneaded with hands.

To protect against PVA getting on your skin, wear gloves.

Afterwards, the fabric is laid out on the table, a bottle is placed in the middle and carefully wrapped, forming artistic folds.

It is important to leave a flat area on which the drawing will be applied. If the material is too heavy and tries to slide, it can be fixed at the bottom with wire and covered with waves.

The fabric will have to dry for at least 24 hours, depending on the thickness of the chosen material. It is important to remember that this is only possible in a cool place, due to the champagne.

Acrylic paint of the desired color is applied to the dried fabric and allowed to dry again.

The image is applied to the prepared area, and the selected decoration (except for rhinestones) is applied to the remaining parts.

The finished bottle is coated with several layers of varnish and, if necessary, rhinestones are glued.

Tips for Beginners

Before starting any type of work, it is important to check the quality of all materials, since at some stages the work cannot be reversed. And it will be very unfortunate to find dried glue or other unusable material. The workplace should be well lit so that all the smallest details can be easily seen, especially in jobs where there are a large number of them.

Sometimes the process gets very boring, especially when there are small, monotonous parts and movements. I want to finish it quickly, which can cause mistakes and irregularities. For any type of work, you must wear gloves and cover the table with a disposable tablecloth or protective film. Great care should be taken when choosing tools and materials. Of course, you want to save money, but low-quality, cheap materials can have completely different properties. So before purchasing, it is better to read the truthful reviews and buying tips.

3.7/5 — (3 votes)

Why champagne and is it possible to use other drinks?

Decoration variations depend only on the imagination of the newlyweds. Often the bottles are dressed in costumes similar to those of newlyweds. An honorary witness on the part of the groom is responsible for the inviolability of the “bulls” during the celebration. If guests manage to steal a valuable souvenir, they will have to fork out for ransom.

The custom of beautifully decorating wedding champagne bottles dates back to ancient times. The couple were presented with a bull and a cow tied at the horns with a red ribbon for their wedding. Such a gift was considered especially valuable; not everyone could afford to purchase a couple of animals. Relatives cared about the prosperity of the new family, so a year later they came to find out about the well-being of the couple. Prosperity was evidenced by a jug of milk from the young housewife, drunk by the guests in turn with wishes of wealth and happiness.

Small villages gradually became a thing of the past, but the tradition of giving “bulls” remained. They were replaced by decorated bottles of alcohol, which should be stored until the next anniversary. Instead of champagne, decoration with cognac, wine or vodka is allowed. You can take one container for stronger alcohol, and the second for sparkling wine.

First, they open the “groom’s” bottle, and the young wife is trusted to be the first to sip the champagne. With the birth of the baby comes the turn of the “bride’s” bottle, but this time the wife will have to abstain from the alcoholic drink.

A wedding is an unforgettable moment for a couple in love. The celebration will quickly end, and the spouses will be left with decorated wedding bottles as a souvenir, as evidence of the beginning of a happy future.

Recommendations

• Be sure to prepare the glass before starting work - remove the label, degrease and dry;
• Remember that too much heat can negatively affect the taste of the champagne;
• When choosing a design, focus on the theme of your wedding , the overall decor of the festive table, as well as the groom’s suit and the bride’s dress;
• Study how much time is needed for this or that stage of work in order to finish everything before the ceremony in an emergency mode. For example, acrylic pre-hardens 30 minutes after application, but remains weak for several more days - this is important to consider if you are going to glue something on it;
• Decorating bottles for the bride and groom allows for a variety of experiments, but it is worth remembering about moderation in order to create a truly elegant design.

What materials are traditionally used to decorate a wedding bottle?

It is advisable to decorate both bottles using the same technique so that the paired combination can be seen.

For example, if it's just white spray painting, you can buy one larger bottle and decorate it with a homemade hat and a bow tie for the neck. Then a smaller bottle may have a white veil or skirt with 2-3 rows of flounces.

They can be gathered with elastic or sewn from a beautiful and light white fabric, gathered with a drawstring:

• tulle;
• atlas;
• silk;
• organza;
• tulle;
• veil;
• guipure;
• lace;
• embossed ribbon.

More attention is paid to the design of the “female” bottle; the “male” half of the table decoration looks more restrained. Modest decor can be sophisticated if you think through every detail.

You can spy on other people's ideas or make something from scrap materials that no one has ever had before, when you have such a desire.

Advice. The design of wedding glasses and bottles should not be taken lightly. These attributes will be in full view, so there is another opportunity to surprise your guests.

If the wedding is non-alcoholic, you can arrange any fizzy drink in a beautiful bottle. Some people want to decorate a bottle of cognac or other strong drink. The basis of the decoration is the same - wedding theme:

• he and she;
• rings;
• hearts;
• color;
• elements of the bride's outfit.

You can use beads and stones with a flat base (for gluing), sparkles and beads, small artificial flowers and fragments of jewelry.

If you are ready to do the work yourself, do not put this part of the wedding props on the back burner. It may take longer than expected. To choose something creative and unconventional when you don’t have your own ideas, look at the topic of decorating wedding bottles with your own hands, master classes and step-by-step explanations.

Of course, such a wedding attribute can be bought ready-made or offered to a craftsman to make it to order.

This won’t surprise anyone today, but where is the guarantee that your guests didn’t celebrate another wedding at a table with exactly the same decor? It can get awkward when asked, whose champagne is it? Therefore, it is better to choose something original so that no one around you has this.

An order for a craftsman will cost 2-3 times more, but it’s not even a matter of saving, although everything can be done from scrap materials. No one can put as much warmth into decorating your wedding as the bride and groom themselves or their loved ones.

Important! You can vary the color of the decor of wedding bottles with your own hands, but it should not bring disharmony to the overall design of the festive feast. If this is a wedding in lilac, gold or turquoise tones, then it is better to complement a white bottle of champagne with decor in the agreed upon range.

The original decoration can be made in duplicate and sold to guests at an impromptu auction. Or offer a souvenir as a prize in the most beautiful or original competitions.

Engraving

Engraving is one of the most sophisticated and impressive types of bottle decoration. Only an artist can do it independently if he has the necessary equipment. Therefore, engraving is ordered in special workshops. If time is limited, laser engraving is chosen. The desire to see a filigree ornament is ensured by handmade work that is more expensive and takes longer to complete.

Handwork is done using diamond or special alloys. Sometimes the design is applied to a thin layer of brass, which is subsequently glued to the bottle.

The engraver can order any inscription, including poems and warm wishes. Rings, hearts, cooing doves, floral motifs, even portraits and favorite aphorisms of the young - there are no barriers to this technique.

Of all the types of wedding bottle decorations, engraving is the most long-lasting. It will not darken over time, will not fall off, and will not become dusty. The engraved bottle can be washed under running water at any time. This is an excellent talisman of longevity and unfading love.

You can also decorate the newlyweds' festive glasses with engraving. If handled with care, they can drink the fizzy drink at both a calico and a diamond wedding, each time reminding them of the first marriage kiss.