How to make a wooden spoon: necessary tools, technology for performing the work and step-by-step instructions with photos

Today I want to talk about how to carve a wooden spoon. About six months ago I suddenly really wanted to make something out of wood. And do it not just like that, but with benefit. Of course, one of the most popular items in this case is a wooden spoon. Before getting started, I read various articles, but many of them seemed too complicated and after reading them, it was not entirely clear which way to approach making a wooden spoon. In reality, everything turned out to be much simpler and you need to read less and try more. So let's go.

To make a wooden spoon we will need the following items:

Material (wood)
Saw
Ax (optional)
Knife
spoon cutter
Sandpaper

Basic tools and workpieces

To roughly understand how to make a wooden spoon, watch the sketches of the masters and videos on the topic. For small dishes you will need:

A piece of wood, preferably a walnut. Not soft, young. As a last resort, you can use hard wood if you are a skilled craftsman.
Skobel.
Chisel.
Sandpaper of different grits.
File for wood processing.
Stichel thin, steel cutter for decorative carvings.
Clamp for fixing timber.
Rag.
Edible oil, not base oil.
Rasp.

Use a pencil to draw a spoon shape onto a piece of wood and then cut it with a bandsaw. If you don't have one, you can get by with a rasp.

Mirror frame

Plastic spoons can be used not only to create crafts, but also to make unusual accessories and interior decor. It will be very easy to make a frame for the mirror.

You will need:

Plastic spoons (the quantity depends on the size of the mirror);
Several sheets of thick cardboard;
Paints (aerosol);
Glue;
Scissors.

Measure the parameters of your mirror and transfer them to cardboard.

Draw a circle on cardboard and cut it out. Cut off the stems of the spoons.

Cover the entire space of the cardboard with the oval parts of the spoons (concave side up). Use spray paint to color the resulting mirror frame.

Picture of shape and dimensions

A piece of wood that is too thin will not allow the spoon to be deep. Rather, it is suitable for kneading salads, cooking porridge, and soups. Deep ladle for first courses have always been distinguished by their convexity and large shape.

Mark with a pencil the boundaries of the spoon and the place where the indentation will be. Wear gloves and prepare for nicks and rough edges—splinters are guaranteed. The rasp has sharp corners and the blade itself, be careful. The technique for making wooden spoons is simple:

Use a paring knife to remove excess pieces from the wood block.
We fix the block with a clamp.
We form a recess with a chisel or cranberry.
Cutting is done in the direction of the fibers.
Leave a thickness allowance for trimming and sanding.

If you don’t know how to make a wooden spoon of the correct depth, draw a cut line on the side of the cut with a pencil and insert a button. Once you reach it from the inside, take it out.

Hanging hooks for kitchen towels or oven mitts

To implement this option, you will need a bracket with a tube or rod attached to the wall. First you need to bend the metal fork in a certain way using pliers. It is unlikely that it will be possible to explain in words what the bends should be, so we suggest looking at how this is done in the photo.

We bend the fork in a certain way using pliers

When the fork is bent, it can be hung on a pipe or rod, and its working side will serve as a towel hook.

These are some interesting kitchen hooks you can make from a fork

Shaping and finishing the handle

When the workpiece is completed, the approximate size and shape are achieved, proceed to the next step. First you need to fix the spoon to give it a perfectly round shape. For this, a Bogorodsk knife is used, but you can make a tool for making wooden spoons yourself.

A wide chisel is used to grind and at the same time cut off unnecessary small parts.
You need to work out the handle with a knife so that it is not too thin and fragile.

Next, all irregularities are removed with a spoon cutter and the edges are leveled. Using sanding, go over the product several times, each time reducing the grain size of the material.

Plastic peacock

In ancient times, peacocks decorated the estates of nobles. Nowadays, it is called the royal bird. This peacock is not very easy to make, but if you make it, it will decorate your family nest.

First, paint the spoons white so that the paint lies evenly on the surface. When the dye dries, we begin to draw multi-colored patterns. While the paint layer is drying, cut out a bird carcass and an even circle from cardboard. Cut to any size, but keep in mind that the larger the size, the more raw materials required.

Color the circle yellow. The next step is to paint the cotton swabs blue, after which we paint the bird carcass. Also in blue. After drying, cut off the blue part from the cotton swabs. We glue the cotton elements to the body of the peacock until a three-dimensional surface is formed.

We assemble the head from the main parts of the instrument, paint it blue and attach it to the neck. The spoons are glued to the yellow circle, and thus we create a tail. We make a tuft of blue cotton wool and decorate it with glitter. We draw on the eyes and beak. We attach the body to the tail, and we get a beautiful bird - a peacock.

Lint removal for kitchen use

Knowing how to make a wooden spoon, the task now is to remove the lint from its surface. If a spoon is used during the cooking process, then as a result of water getting in, the fine lint can come off and enter the food and the body through it. Therefore, you need to do the following:

Immerse the spoon in cold water for several hours.
Dry it and sand it with sandpaper.
Repeat the procedure several times until the fibers no longer appear.

It is important! The abrasive must be fine-grained so that the spoon retains its shape, but becomes smooth without the formation of new lint.

Funny snowman made from devices for one time

Such a snowman will not leave anyone indifferent. First you should go through the most difficult step - sewing clothes, but here you can use your imagination and make whatever you want, starting with a hat and scarf, and ending with a complete set of clothes.

Next, you need to revive the snowman, draw a face on the round part of the scoop. After these processes, it is enough to insert it into the lid with plasticine. The spoon snowman is ready.

Processing with oils: giving the spoon a beautiful appearance

The technology for making wooden spoons is not limited to stripping. After all work to remove lint, it is necessary to treat the product with special means so that it can be used in the cooking process.

Edible oils are used to create a smooth surface.
Base oils can only be used if the spoon will serve as a piece of decoration in the house.
Flaxseed oil is the only product that can retain moisture outside. Suitable for processing food kitchen utensils.

The impregnation is environmentally friendly. It protects the wood from moisture, has antibacterial properties, and emphasizes the structure of the wood without filling the decorative cutout with layers of emulsions. The only negative is its constant updating. Since the oil periodically evaporates, it is necessary to carry out treatment once every 2-3 months.

New Year's crafts from plastic spoons

When the New Year's mood is clearly expressed in the house and you want to fill the whole house with holiday, release your energy while spending pleasant time with your little family members by making wonderful Christmas trees from disposable spoons.

This is one of the simplest products; you will need plastic tools, a paper cone, special strength glue, and watercolors. We cut the devices, leaving only the oval parts.

We glue the frame, placing rows on top of each other. At this stage, everything is ready and, if desired, you can decorate the Christmas tree in any shade. The toy is suitable for a school project or home decoration.

Snowflake

An ordinary snowflake will become a New Year's toy made from disposable spoons, which will decorate the apartment and give it a winter atmosphere. To make such a craft from disposable spoons you will need: a rosette core, a specially strong adhesive, scissors, and a small circle of cardboard.

We cut off the ends of six scoops, place them on a cardboard circle, and glue them together. We take three ladle, cut off everything except the oval component, connect them with the already glued devices.

Glue the core into the center. If possible, decorate with snowflake stickers. Such snowflakes will look great on the New Year tree and add white shades to the apartment.

Note!

How to properly make a birdhouse with your own hands from scrap materials: we create an original birdhouse according to sketches
How to make candles with your own hands: instructions for making wax, gel, scented, homemade decorative candles with a wick
What you can make from foamiran with your own hands: we create flowers, Christmas tree decorations, snowflakes, three-dimensional paintings (photo + video)

Industrial food additives and oils for wood processing

Focusing on a template on how to make a wooden spoon, many craftsmen only have difficulty choosing the finishing material. They are necessary for working with cutting boards, handles, spoons and other kitchen utensils made of natural wood.

The degree of liquid absorption of wood is higher than that of paper, so it is common to use mineral oils.
Wooden utensils and countertops are treated with water-repellent materials.
They do not form a film, the pores are open, and the wood continues to “breathe.”

Mineral components do not affect the taste of the product, do not spoil its structure, and do not cause an unpleasant odor. Industry uses petroleum jelly, which does not need to be renewed over time. It is also more popular due to the lack of rancid taste.

Any making of wooden spoons with your own hands comes to the logical final stage - nut butter is also used at home.

Tip #6: Add decorations

Tip #6: Add decorations
As we know, the devil is in the details. The genius of beauty is hiding there. Original table decorations will make your dinner unique and create a special atmosphere; the main thing is to approach their choice creatively. Even ordinary candles will look original if you use colored glasses as candlesticks, and place several floating candles in a transparent deep dish or salad bowl made of colored tempered glass. You don’t have to worry that the dishes will crack due to candle fire, because after tempering, the glass can withstand temperature changes of up to 120 degrees. The table decoration can be the usual vegetables, fruits and berries. Place a few cherries or a couple of bright yellow lemons on the table or in plates, and add a few slices of green apple and a sprig of basil to a transparent jug of water. At the same time, you should not give up such traditional table decoration as flowers, the main thing is not to overdo it. Avoid large bouquets in massive vases that will prevent your guests from seeing each other. A small flower arrangement that can be placed directly in a transparent glass is enough. Alternatively, place petals or a few sprigs of wild plants on the table. Make your guests feel like the food you're serving wasn't bought in a supermarket, but came straight from the farm to your kitchen. These tips will help you create a truly impressive table. However, there is no limit to perfection

Be sure to pay attention to our selection of the best examples and ideas on how to beautifully set the table so that everyone gasps in surprise. The main thing is that you have the desire to give joy to yourself and your loved ones

It will, as if by magic, transform a routine into a holiday, and a small city kitchen into a fashionable restaurant!

How to set the table beautifully so that everyone gasps in surprise

You need to set the dinner table beautifully not only for the arrival of guests, but also for your family. Even the kitchen and coffee tables deserve special treatment. We offer a few tips to help make your table setting simple and stylish. The main secret lies in the combination of texture, color and accessories.

The process of treating products with oils is an important component of safe use.

Before applying the oil, prepare the spoon:

Clean and sand, dry well.
Soak a clean rag or brush with oil.
Coat the product on all sides with a generous amount of finishing material.
Leave in a dark place to soak completely for 25 minutes.

Excess must be removed with a dry swab in the direction of the fibers. The impregnation procedure is repeated several times until the last layer dries within a day. Therefore, in total, each subsequent layer of oil will dry 30-40 minutes longer than the previous one. During the day it will be possible to apply 12-15 layers due to the low polymerization rate of the components.

There is no corkscrew: how can a regular fork help?

The guest has arrived, candles are lit, poetry, romance... and, of course, wine. And, as always happens in Russia, there is no corkscrew in the apartment. What to do? And here again the fork comes to the rescue. However, you should not try to push the cork inside the bottle. Of course, this action is quite feasible, but there is a danger that increased pressure will be created inside, causing the wine to splash out, dirtying everything around. It is much safer to screw a self-tapping screw or screw into the cork, then pry the cap with the teeth of a fork and, using it as a lever, carefully pull out the cork. This will be very easy to do. In this case, you can be sure that the clothes and tablecloth will not be damaged.

Screw a screw or self-tapping screw into the bottle cap

Using the fork as a lever, carefully remove the plug and continue to enjoy the evening.

Safety of other finishing materials

In large industries, instead of oils, secondary oil products are used, which last longer. They are more expensive, but the cost is justified.

Wooden finishing materials need a durable “frame” that will not wear off and enter the body along with food.
There are compositions based on oils, polyurethane, nitrocellulose varnish, shellac, and linseed oil.

They are absolutely harmless if completely dry. The formed film does not yet indicate complete drying of the product, since oils and other components may remain moist inside the fibers. This is important to know so as not to endanger people.

To maintain the attractive appearance of the spoon over a long period of use, you need to clean it from food in warm water. Use only soap-based, environmentally friendly products, without chemicals or abrasives. Do not allow spoons to remain in water for a long time. If the spoon is damaged (cracks, breaks, lint), it is ground and polished again, after which several layers of oil are reapplied. This way you can use the accessory in the kitchen for a long time.

Candlestick

Another opportunity to recycle scoops would be a decorative candle stand. For such a product we will need: several oval pieces of disposable tableware, a scented candle and super glue.

We create a decoration in the form of a lotus flower, gradually gluing the spherical parts. At the end, you should definitely glue the candle itself to the center of the flower. This trinket is made quite quickly and quite simply, but at the same time it will creatively improve your life. It is recommended to use spray paint as it will go on smoothly on the frame.

How to make a wooden spoon with your own hands: drawings for decorating simple products

“A spoon is for dinner,” and in our case, for decoration. Not only boards and plates, cups and stands can serve as decoration in the kitchen interior. If the facades allow you to preserve the design, then why not take carvings on such small decorative items as spoons as a guide. This is a great idea, especially if you already know how to make your own wooden spoon.

To add originality and beauty to the workpiece, patterns of various shapes are used:

Geometric figured carving.
Burning out drawings.
Khokhloma painting in Russian style.

Below are the steps of the process on how to make a wooden spoon at home, as well as ways to decorate it.

In modern crafts it is impossible to do without a burning machine, but now they use printers that beautifully imitate the design. By transferring an image from a computer, you can set any setting to the machine so that it does the “manual work” for a person. Thus, each spoon can be painted literally in a matter of seconds with a laser jet.

Pineapple made from plastic utensils

An original piece of decoration in a child's room. It is easy to make, practical and fits into almost any room interior. To make it you will need: an oval lamp, a glue gun, spoons, yellow gouache, a knife, green cardboard, a bottle.

We cut out a cylinder from the bottle, cutting it off on both sides. We paint the devices in a yellow shade, after cutting them and leaving only the top side. We take the deep sides of the tools and attach them to the bottom row.

Glue another layer to cover the gaps between the petals. Thus, we glue the entire bottle. We make leaves from green cardboard and glue them to the base of the bottle. Finally, place the pineapple on a suitable lamp.

Artistic spoons and decoration of household tools

Carving gives wood greater elegance, since it can only be done by hand. Thanks to calculations, carpenters have long come up with “sets” of such decors that will look good on thin and dense spoons, with large and small recesses, square or round:

A star is a three-dimensional image on the handle.
A braid or weave is mainly depicted on the “trunk” of a spoon.
Geometric chain - several deep lines placed perpendicular to each other. They form convex diamonds.

You can also find many patterns that will suit a specific spoon shape. You can easily learn how to make your own wooden spoon, fork or spatula. Thanks to accessibility, contemporary art becomes easy to learn and master, even for women. Right now, in some Russian cities, school students are learning techniques for decorating spoons and boards with carvings. Children in kindergartens draw on wooden objects, learn to combine colors, and work with natural materials.

But burning is becoming a separate art direction. With its help, the master can not only add zest to a simple piece of wood, but also imbue it with “history.” On a cutting board and the recesses of spoons you can easily depict a still life, landscape and even a portrait. It all depends on the dexterity and skill of the master, his experience and work experience.

Classic and original spoons differ not only in the design, but also in the volume of work. For example, the drawing above shows a way to create an original spoon that will serve as a decorative element. They usually have unusually shaped handles that would be awkward to hold if you needed to cook dinner or stir food. Household tools are more pliable and reliable in cooking, so no finesse is provided for them, but the choice remains with the master.

Carving tools

General principles

Wood carving is a fairly popular technique for decorating various products.

As a rule, the process itself follows this scheme:

First, a blank is made from wood, be it a flat board, a block or a figured blank.

Note! Sometimes with the help of . In this case, a fragment is selected whose shape has maximum decorative potential.

Then a rough leveling of the surface of the workpiece is performed, during which all defects are removed from it.

After this, the surface is processed with special cutters, with the help of which a part of the wood is selected. Due to this, a decorative relief is formed.
After the actual carving is completed, finishing is carried out - grinding the cut areas, impregnation with protective compounds, full or partial painting, varnishing, etc.

The most important tools in this process are the wood carving cutters. In addition to the skill of the carver himself, it is the quality and correct selection of the cutter that determines how clean the ornament or plot image on the wood will be.

That is why below we will look at the main types of such tools and describe where and how they are used.

Main types of incisors

To create three-dimensional images, craftsmen use a variety of types of wood cutters. In principle, if you have the skill, you can do without some of the products listed below, but to achieve the best result, it is better to collect as extensive a set as possible and use each device for its intended purpose.

The main types of cutters are presented in the table below:

Variety	Application at work
Blunt knives	They are knives with short blades in the shape of a triangle with different bevel angles. They are a universal tool, therefore they can be used to form a wide variety of relief objects, ranging from straight lines to small indentations. When working with a blunt knife, three functional zones are used: toe, blade and heel.
Chisels	The most common type of incisors. A typical chisel is a long rod with a cutting edge formed at the end. Depending on the shape of the chisel edge, there are: Flat – used to form straight lines and recesses. Flat chisels with a wide blade are also used for roughing to cut or chip away surface defects. Angle - used for cutting V-shaped grooves and notches, as well as for forming shaped elements. The smaller the angle of closure of the planes of such a chisel, the deeper the relief it forms. Semicircular ones are one of the most common in figured carving. The rounded shape of the end blade allows you to effectively remove wood from the solid wood, forming a recess. Small semicircular chisels are also used for texturing and scoring smooth surfaces. Bracket - functionally similar to semicircular, but when wood is removed, a groove is formed with clearly defined internal edges. Reverse (round and bracket) - used to form semicircular and rectangular protruding parts, as well as to draw parallel lines.

Table decor for a romantic meeting

A romantic meeting requires an unusual atmosphere and privacy, which can be emphasized with the right table setting. When choosing a design style, take into account the preferences and color preferences of your chosen one. You don’t need to wait for Valentine’s Day for this kind of decor: lovingly selected dishes and accessories will transform the most ordinary lunch or dinner.

We design with love

As a rule, a romantic meeting involves dinner together. To serve it, use red textiles or dishes and candles that will create twilight in the room. Romantic types will love heart-shaped accessories and rose arrangements.

Various accessories will not be superfluous

If you like unconventional solutions and are cool with red shades and an abundance of hearts, set the table for a romantic breakfast. Candles and flowers are a must, and the color scheme is selected taking into account your preferences and the taste of the guest. In addition, hearts can be made from napkins, fruits and even toast.

Flowers are a must

What’s special is serving breakfast on a special tray, with which you will surprise and delight your other half in the morning. To do this, you will need a little imagination to create an attractive still life from a cup of tea or coffee, juice, fruit and fresh scones with jam.

Attractive still life as breakfast in bed

How to choose a desk with drawers and a shelf (+190 Photos). We practically organize the space

There is no corkscrew: how can a regular fork help?

Screw a screw or self-tapping screw into the bottle cap

Using the fork as a lever, carefully remove the plug and continue to enjoy the evening.

Flower vase

Making a cute flower vase will require you to have:

spoon;
tin cans;
scissors;
glue;
paints.

Paint the jar your favorite color. Cut off the handles from the spoons. Paint the rounded parts of the spoons in the desired colors.
Glue the spoons to the jar, placing them in even rows.

Note!

Plasticine crafts for children: master class + instructions on how to make it yourself. Photos, best ideas, videos, secrets, reviews
Autumn crafts: TOP-200 photos of the best options with an exclusive design. Step-by-step instructions, master class, secrets of craftswomen, reviews + video
DIY night light - instructions and design tips

Tongs for turning fried semi-finished products

Also a very useful utensil that can be made from two forks and a rubber band for money. The forks must be positioned so that they are opposite one another, touching the working side with their convex parts. After this, a little closer to the edge from the point of contact, they are tightened with several layers of elastic, resulting in tongs that open themselves as soon as the person stops putting pressure on them.

Using an elastic band, we tighten the forks, connecting one to the other

Now the side that everyone is used to holding on to is becoming the working side. A little effort, and the tongs squeezed, picking up a cutlet or flatbread from the frying pan. We turn it over, release the pressure, the pliers open on their own, and the product is fried on the reverse side.

This is what finished kitchen tongs look like