Winter is that time of year when everything around is covered with a “fluffy blanket” in the form of snow. Our country is located in a climate zone where we must be prepared for heavy rainfall every winter. Often snow falls completely unexpectedly and then traffic throughout the city stops.
Fortunately, in big cities there are metro stations where underground trains constantly run, on which you can easily get to anywhere in the city.
The situation is completely different in small towns and villages, where the movement of any transport is not possible during heavy snowfalls.
But even from such a difficult situation you can find a way out, namely, move on a snowmobile. Today we will talk to you about how to make a homemade snowmobile with your own hands.
Communities › DIY › Blog › DIY sports corner.
Part 1
The child is growing quickly and therefore in the autumn-winter period it was decided to make a sports corner. I had several requirements: a) it should be as multifunctional as possible b) the Swedish chariot should be able to withstand adults
Thanks to all the masters who have already solved similar problems and shared their work on the Internet. The basis was taken from a picture found on the Internet.
At the start, it was decided that the complex should contain the following elements; *Swedish ladder *Run walker *Gladiator net *Slide *Swing *Trapezoid *Rope ladder
Everyone knows perfectly well that the most convenient way to make crossbars is to take cuttings for rakes; a pack of cuttings (20 pieces) was bought at a wholesale base, sawn and opened with varnish
The forestry base ordered 6 40mm boards for the Swedish ladder and 4 pieces of support, 2.5 m long. For the monkey bars, 2 pieces, 2 m long. The boards were purchased 4 months before the start of work. And they dried for 4 months according to all the rules (dry, ventilated shed)
The boards were sanded and varnished. The process is very dusty and smelly, so everything was done outside of the apartment. To fit the crossbars, the recesses were drilled with a milling cutter, filled with furniture glue and, to be sure, they were placed on the comformats
In the second part, I will post a photo of each element with a detailed description. If you are interested, ask questions, I will try to answer.
I’m not saying goodbye. See you later...
Women's bag with braid
My first experience of writing a post on Pikabu. Chukchi is not a writer, so don’t judge harshly. It was decided to make a women's handbag from a piece of black leather 2.4 mm thick. The customer made it clear exactly what he wanted and I got down to business. I cut out the main details of the product.
Next, it was necessary to braid the main part of the bag body with leather cord. The cord was cut by me from leather 1mm thick. To begin with, on a piece of leather I experimented with the width of the cord and the spacing between the holes for the braid and their diameter. Then I implemented the optimal result for me on the details.
I purchased fittings and rivets.
Straps and a handle for the bag were made, and half rings for the shoulder strap were sewn on.
Next, the product assembly process begins.
Photo of the finished product after assembly and application of the finishing coating.
Thank you all for your attention!
Tags: children's complex, monkey bars, Swedish forest
Comments 24
I wish I could announce the dimensions of the product, I want to make the same wall.
When I was a child, I had a similar one only twice as large; my dad actually made it from metal pipes for the ceiling. I didn't get off her.
Well done! it turned out great. tell us how you made the slide and how you secured it?
Great job. I would also add a horizontal bar.
the cuttings were drilled through or how it was secured is not entirely clear
Gorgeous! and helpers nearby!
It is a mistake to insert the handle bars into the center of the board - less than half of the material is used to hold it. Also, as I understand it, the holes were not milled to their full depth - even less strength. Confirmats will not help here - the cap is too small, and they are not very good at shearing loads (the projection is too small). Static tests with a body weight of 100 kg on a freshly assembled device mean nothing; the mobility of children and dynamic loads are not taken into account (Ef is equal to Em * Ve squared, well, it’s half) and the change in strength properties after drying (and in the apartment the humidity will be less than street), and the resulting deformations (with additional stresses of the material).
In the future, you will have to make it a rule for yourself to check all the elements on yourself before admitting children. On the other hand, the father’s own example will be an incentive for the child to “Do with us, do like us, do better than us!” (c) old GDR sports family game show
