Top 15 - Best Headphone Holders from AliExpress

26.01.2021

2 395

0

There must be order in everything. This applies even more to gamers, since a well-distributed workspace has a significant impact on the comfort of the game, and, consequently, increases productivity.

Today we invite you to look at the best offers of holders/stands for headsets/headphones, which not only allow you to successfully place your gaming peripherals, but also the quality that will enliven the gaming desk and the overall interior of the room.

How to make a headphone stand with your own hands?

Once all the necessary materials and tools have been prepared, you can begin the manufacturing process. Follow a certain sequence of actions:

• We will make the basic element of the stand from a piece of wood and acrylic glass. First, cut out two circles of equal size from wood. For example, it can be 18 cm.
• Next, draw a rod on the board that will hold the hook. Recommended support dimensions: 30 cm in height and 5 cm in width.
• Then, using a glass cutter, cut out a circle of aluminum glass. In this case, the diameter must match the wood blank.
• We insert the rod into the base, making holes in all the blanks in advance. All circles should be aligned with each other, and the outer edge should be sanded.
• On an acrylic mug we drill three holes for the LED strip.
• We cut out a ring from the bottom of the circle so that the ribbon can be placed there.
• We insert the rod into the stand, drill a hole in it for the hook and thread it in.
• Next, the elements are glued together using a polyurethane adhesive and dried for 5-6 hours.
• Then the USB controller is connected to the LED strip using heat shrink tubing.
• A hole is cut out at the bottom of the base for the wire and an LED strip is placed inside the ring. It is fixed with glue and the wiring is brought out.

An image or logo on the base of the stand will look unusual. It can be printed on a printer and applied to the top piece of wood. Cutting can be done with any tool that is available. It is convenient to trace the edge of the design with a wood burning device. Here are a few more tips that will help you get the job done better and faster:

First, a guideline is drawn on the board using a simple pencil, and only then the drawing is cut out with a jigsaw. It is better to use a concave shape of the stand: like an hourglass. As a hook, you can buy an ordinary bathroom hook hanger at a hardware store. Wooden surfaces require sanding to avoid scratches. Wooden elements can be easily painted with stain. Pay attention to the glue: it must be polyurethane, not wood glue. Remove excess glue in a timely manner so that after drying the product has a beautiful and neat appearance.

Thus, making a headphone stand is quite simple with your own hands. We hope that this article will be useful and informative. To diversify the appearance, you can show your imagination and cut the holder in the form of an interesting figure. They also use combinations of various materials: plexiglass, metal, plastic and others.

To organize the workplace of a person whose work involves a computer as efficiently as possible, it is worth finding a place for every thing. A particularly pressing issue is the manufacture of a headphone stand. It turns out that making a headphone stand with your own hands is very quick and easy, if you know a few secrets.

FORCE HPS-2

The main advantage of FORCE HPS-2 is its adjustable stand. You can adjust its height if you have very large or, on the contrary, compact headphones. Inside the base of the stand you can hide the cable of your gaming headset, which will have a positive effect on the aesthetics of your gaming setup.

The stand is collapsible, this will allow you to transport it unfolded - this way it will take up less space. Finally, the sleek design of FORCE HPS-2 will make the device a decoration for any computer desk.

Pros:

• Adjustment for high-rise buildings;
• Collapsible design;
• Nice design.

Minuses:

• For its price - no.

Samdi headphone stand

A product from the “not necessary for everyone” and “why is it so expensive” series? Every owner of large on-ear monitor headphones sooner or later faces a problem... Where to hide your “big ears” from your family) or place them next to an armchair, sofa, find a convenient place in the area of ​​the monitor. Possible solution to the problem:

First, these are, of course, hooks with self-adhesive Nouney3m bought at the nearest fixed price... but a couple of falls at 2 a.m. lead to sleep disturbances. And the headphones suffer, even to the point of damage to the casing of the bowls.

Second. These are stands or stands for headphones.

This product can be made in the form of racks of crossbars, large racks with a hook, or in the form of an “oval” that follows the shape of the head, even a series of cabinets for storing precious headphones. The material from which these products are made is wood of various species (sometimes very valuable and hard for mechanical processing), plywood, veneer, acrylic, massive blanks made of aircraft-grade aluminum and stainless steel... The imagination of manufacturers is not limited.

Entire forum threads for lovers of good sound are dedicated to this product. The price starts from a couple of tens of dollars to tens of thousands for fans of certain audiophile brands.

For reference: many companies that produce headphones for sound fans, HiFi&HiEnd stores complete their product or offer to purchase a branded stand.

Example Sennheiser HH-10

Simplicity of design, nameplate and convenience. But the price is good if it’s 2500 rubles ($44).

You can screw a furniture hook to the table, but headphones with a flexible band or a wide headband will not tolerate such violence... The band will stretch, the weight of the wire arm can jump out of the fastening... and so on and so forth...

As the owner of the Chinese Tacstar 80 pro headphones “in the suitcase version,” I at one time kept the headphones in the included suitcase, but...

After some time, Meizu HD50 was also purchased... and the child and the dog liked the suitcase. On Facebook, there was a mention of the young Chinese company Samdi, which positions itself as a dealer in products made from environmentally friendly materials. Among the products under their brand, what I wanted caught my eye. Stand Samdi U. Samdi position themselves as a manufacturer of original products made from environmentally friendly wood.

Bent plywood from wood unknown to me. In reviews of other Samdi products, I came across the opinion that this is laminated veneer. I won’t argue. Sold in two colors: walnut or beech. My color is dark walnut. There is no smell of chemical impregnation or glue.

Contents: a box made of recycled paper without chlorine treatment (the mail crumpled it so much, so crumpled it... that there were some scraps left in the bag..), the stand itself, silicone legs on 3M self-adhesive in a bag, a bag made of soft gray fabric ( lost right there, in the bowels of the apartment), a glass holder made of pressed cork.

Weight without packaging 465 g. Dimensions 16.3 cm * 11.1 cm * 25.8 cm

Appearance

I am 100% satisfied with the purchase. In Russian stores, similar OEM products are more expensive. A suitable product, suitable for all monitor and other false ears.

Speedlink Excedo Gaming Headset Stand

Another stand with a no-frills design. The Speedlink Excedo Gaming Headset Stand has a wide base with a headphone holder extending out from it. The latter is equipped with a silicone insert that preserves the integrity of the headband of the gaming headset, and non-slip material pads are attached to the legs of the stand, which will prevent it from fidgeting on the table.

Pros:

• Solid base;
• Holds headphones securely.

Minuses:

• The design is a bit clumsy.

Signal transmission methods

This characteristic allows you to divide headphone models according to the method of connection to playback equipment. This group has long been dominated by wired systems, which have no alternative at all. However, today in the consumer market you can buy headphones that use a wireless signal transmission system over a certain distance. Such devices are of exceptional quality; they do not limit freedom of movement at all. Bluetooth headphones are the most popular. This device is very compact and transmits high-quality sound.

Avantree HS102

Avantree HS102 has a minimalistic design and compact size. The stand seems quite thin, but is able to support massive headphones. Much more interesting is the presence of a special recess in the base: it is designed to accommodate the headset cable. This stand is cheaper than many of the models in our selection, making it an excellent choice for the budget-conscious gamer.

Pros:

• Place for headset cable;
• Low price;
• A stable base.

Minuses:

• No additional features.

Interesting design with additional features

A DIY headphone stand can perform several functions at the same time: hold headphones in a certain position, have a place for high-quality storage of a flash drive, and a device for holding wires. All this can be realized with the help of a special design.

If you don’t have the time and money to create a full-fledged stand, you can use improvised means. In this case, you need a suspension on which the headphone arm will be placed.

A DIY headphone stand can be:

1. A plastic hook designed for bathrooms is a simple and budget option.
2. A large stationery clip will become a mobile device for holding headphones.
3. The vertically attached disc box is an interesting design and a high-quality stand.
4. A plastic bottle that can be filled with sea pebbles and shells.

Using your imagination, you can create a stand for headphones from any material or device that is at hand.

Canyon WH-200

Canyon WH-200 is a three-in-one device: a headphone stand, a mouse cable holder (bungee) and a USB hub. Also backlit. It looks stylish, does not take up much space on the table, does not slip on the surface, and also contains seven backlight modes. And besides, it costs nothing.

The only downside is the rather cheap plastic housing. Otherwise, it’s an almost perfect gadget.

Pros:

• Universal device;
• There is a mouse cable holder;
• Beautiful lighting.

Minuses:

• Pretty cheap plastic.

Design

Based on design features, all headphones can be divided into 4 groups:

on-ear – the name speaks for itself, gadgets of this type are pressed directly to the ear

It is important to choose a comfortable material for the ear pads (soft cushions adjacent to the body), since poor-quality finishing can cause discomfort; full-size – these headphones are not similar in appearance to the previous ones, but they are positioned somewhat differently: they seem to “hug” the ears, and are much more comfortable in them. Headphones of this type, all other things being equal, have the highest sound quality, but they also cost more; earbuds are small headphones that are inserted into the ear, the most popular type today; plugs or plug-in - these devices are as miniature as the previous ones, but they are inserted directly into the ear canal, due to which the sound quality and noise insulation are higher than that of earbuds

When properly selected, they fit perfectly. The downside is that they put a lot of strain on the hearing aid and do not allow the skin to breathe, which can cause discomfort. These headphones also need to be cleaned regularly.

Design is often considered first when talking about headphones. We moved it to the end because, in principle, any type is suitable for laptop computers. But if you often carry a laptop with you, it’s worth thinking about miniature options - earbuds or plugs. If you are a lover of overhead or full-size devices, look for models with a folding mechanism. If you do not plan to carry headphones with you, choose any design based on your preferences.

Criterias of choice

In order for headphones to provide comfortable sleep and good health, they must be of high quality and comfortable. When choosing soundproofing products for sleep, it is important to pay attention to

• Quality of material. It should be pleasant to the touch, natural, and not cause irritation or allergies.
• Noise reduction level. Depends on thickness. The thinner the model, the worse it performs its task.
• Availability of wires or Bluetooth. The second option is more expensive, but more convenient to use.
• Sound quality from speakers. To speed up falling asleep, you can turn on quiet relaxing music, the sound of rain or forest. Some models are equipped with an automatic shutdown timer.
• Hygienic properties. The surface of the product should be easy to clean. It is important that the speakers are removed from the outer case.
• Design. The model should be comfortable, not put pressure on the head and ears, but should be securely fixed.

Rating of the best headphones for use with a laptop

Sony MDR-XB510AS

pros

• high quality playback, which is maintained even at low volume;
• length adjustment device;
• microphone;
• ear clips;
• 4 pairs of replaceable ear pads and a case included.

Minuses

• low microphone position;
• thin cable.

From 1898 RUR

Note: these headphones are protected from moisture, so they can be safely washed under the tap. Considering that the design is “plugs” that need regular cleaning, this is very convenient. The headphones are equipped with a standard 1.2 m cable and a 3.5 mm jack. Users praise the device for its deep and clear sound, but some complain that the sound is a bit lacking in bass.

Panasonic RP-HT161

pros

• comfortable, do not put pressure on the head;
• optimal price/quality ratio.

Minuses

• slight sound distortion;
• no volume control.

From 590 ₽

Note: Users appreciate the reliability of this model; with daily use, it will last for many years. The ear pads are lined with artificial leather, which can make your ears sweat during prolonged listening. Despite the closed acoustic design, the sound insulation in these headphones is not the best. The headphones are equipped with a 2 m cable and a 3.5 mm jack. The presented sample is a worthy unit for its price category and definitely deserves attention. The maximum power of the device is 1000 mW.

Philips SHS4700

pros

• good, balanced sound;
• stylish design;
• ability to adjust the fit of the headphones.

Minuses

weak attachment of the cups to the ears.

From 848 ₽

Note: this model is designed for sports, but due to its low maximum power - 100 mW - it can be used perfectly with a laptop, since it will not drain battery energy. The headphones are open, so the sound insulation is weak. Asymmetrical wire and standard 3.5 mm connector.

Razer Hammerhead Pro V2

pros

• surround quality sound;
• good sound insulation;
• original, stylish design;
• comfortable, soft ear pads.

Minuses

high price.

From 4890 ₽

Note: This model will provide you with complete immersion in what is happening on your monitor, be it an exciting game or an exciting movie. When listening to music, every note will be clearly audible. Consumers admit that the high price of the device in this case fully corresponds to the quality. The headphones are equipped with a 3.5 mm jack and a cable slightly longer than the standard one - 1.3 m.

Genius HS-M430

pros

• good sound quality;
• large volume reserve;
• good sound insulation;
• microphone;
• folding design;
• soft ear pads;
• volume control;
• "Accept call" function.

Minuses

The headband is too tight.

From 450 ₽

Note: this model can easily outperform its “brothers” in the price category in terms of playback quality - even the bass sounds clear, which budget options cannot always boast of. High-quality materials retain their original appearance for a long time, do not scratch or peel. Connector – 3.5 mm. Cable – 1.2 m.

Razer Kraken Pro – Popular gaming headset for streaming

Full-size Riser headphones are an ideal option for streamers - they are equipped with a flexible unidirectional microphone that can be customized to suit your needs.

The headset is equipped with large 40mm speakers that provide crystal clear music sound in the mid and high frequency ranges with deep bass.

Advantages:

• closed design;
• ease of use;
• stylish design.

Flaws:

• short cable;
• wide fastening tape.

This device is suitable for those who are looking for a model at an average cost and with good characteristics. The headphone microphone clearly captures the user's voice.

The video below provides an overview of the Razer Kraken Pro gaming headset with powerful bass:

The average cost of Razer Kraken Pro headphones is 5,100 rubles.

Plug-in

In everyday life, these devices have a simpler name - they are called “earbuds”. Among other models, they have the most attractive price. Most often, all kinds of mobile gadgets are equipped with similar accessories. For example, they can act as headphones for a phone. The modern standard for such models was created by the developers of Etymotic Research.

This happened in the first half of the 90s of the last century, but this group of goods became generally available much later. The speakers and headphones of this brand do not have the best sound quality - reviews say. In addition, the technique does not fit well with the anatomical features of some people. The package includes foam ear pads, but they do not provide the expected degree of sound insulation.

Razer Base Station Chroma

Another stand from Razer is made not of metal, but of high-quality plastic. The manufacturer also added three USB ports.

Base Station Chroma uses RGB lighting and lacks a headphone jack. One of the unique features is the ability to detach the stand itself, giving the user a nice portable USB hub.

In the end, the only negative we noticed was the poor build quality. Yes, it's durable, but we can't say that Razer impressed us with its quality.

Pros:

• Durable plastic construction;
• Three USB 3.0 ports with data transfer;
• Superior Chroma RGB lighting.

Minuses:

• Not the best build quality for this price range.

Why is a headphone organizer useful?

To organize the most comfortable and convenient space for work and rest, every thing should be in its place. Headphones are no exception. The stand allows you to:

• ensure safe and convenient storage of headphones and thereby extend their service life;
• place the device in a visible place and always have it at hand at the right time;
• decorate the room with an interesting and bright design.

The issue of choosing a template should be taken especially seriously. After all, the beautiful and unusual design of the product can make it the highlight of the room. In addition, the design can simultaneously perform various functions: hold the headphones in a certain position and have special holes for storing flash drives, wires and other small items. The following options are popular:

• Compositions from plastic pipes. This method is especially relevant after repairs and replacement of plumbing equipment.
• Metal forging. This type will be durable.
• The wooden stand is convenient and easy to make. It can be made from almost any log that does not have knots.
• From Lego, which you can borrow from children or buy a couple of packs in the store.

In this example, we will consider an interesting and modern option with LED backlighting from USB. You need to prepare in advance:

• plank (pine);
• acrylic glass;
• hook for hanging;
• USB controller;
• sheet of paper, pencil;
• ruler;
• adhesive composition;
• drill, plane and other tools.

Marvo HZ-04

In contrast to stands with a simple design, Marvo HZ-04 looks aggressive and lights up like a Christmas tree. The RGB backlight has 14 operating modes, 4 USB ports are built into the base, and the headphone holder has an ergonomic shape, so you can be sure that your favorite device will not fall off the stand.

The only drawback of the device may be the passive USB hub: it produces little current, so it is impossible to power powerful devices from it.

Pros:

• Aggressive design;
• USB ports and lighting;

Minuses:

• Design for everyone.

Let's get started!

First you need to cut off a part of the felt-tip pen, the length of which should be equal to the width of the body from the tape.

Then you need to drill/burn a hole for the wire. You need to drill at some distance from the edge. It should look something like this:

We push the wire through and insert it into the plate. To prevent the felt-tip pen from going further and dangling, it must be secured with electrical tape.

Next, we prepare the base of the structure. To do this, take the base from a roll of tape and cut a groove in it for the passage of the wire.

Then glue it to the plate:

After this, we put another plate on the second end of the felt-tip pen and screw in the bolt:

The structure should look like this:

We put the disk on the tube from the front side. Solder the LED with a resistor to the wire on the drive side.

Then we insert it into the hole in the part (pendants) from the chandelier (the hole needs to be drilled a little larger than the diameter of the LED) and fill it with glue.

We stretch the wire so that the part with the LED touches the disk. Fix with glue:

Now let's work on the USB plug: solder the plus of the LED to the red wire, and the minus to the black wire. We wrap the soldering area with electrical tape. That's it... all that remains is to figure out how to mount the device to the wall or to another place. I simply drilled a hole in the bottom plate and secured the stand with a nail. But this must be done carefully so that the record does not break.

We connect the wire to the computer and admire our work.

Hanging up the headphones:

It turned out quite well. A photo can't convey the full effect, but the work is worth it. You can also solder a toggle switch to turn off the backlight.

Razer Base Station V2 Chroma

The Razer Base Station V2 Chroma is not just a stand, but a stand with a built-in audio processor that allows you to turn regular stereo headphones into a gaming headset with 7.1 surround sound.

In addition, it is equipped with two USB 3.1 ports, RGB lighting and a non-slip base that adds stability to it. The stand is available in three colors - black, silver and pink, so it will be a great gift for gamers of both sexes.

Pros:

• Metal structure;
• Yes USB 3.1 port with data transfer;
• Chroma RGB lighting, compatible with other Razer devices;
• Three colors to choose from.

Minuses:

• The price is high.

Resistance

Impedance (or resistance) is responsible for the purity of sound; the higher it is, the higher the quality of playback. If you are using a computer's built-in sound card, choose devices with a resistance of 16 - 64 Ohms. This will ensure the clearest sound and volume. Why shouldn't you buy high-impedance headphones? The fact is that such models require more power, which cannot be achieved without an amplifier. Simply put, when connected to a laptop, the wide capabilities of such headphones will not be fully revealed. Too low an impedance will result in extraneous noise.

Ugreen 80701

If you are looking for an inexpensive and stylish stand, then the Ugreen 80701 is what you need. Made of aluminum, it consists of a durable base and a stand with a holder, does not wobble, does not slip and does not take up much space on the table. And besides, it costs much less than models with backlighting and other additional elements.

Pros:

• Beautiful and durable body;
• Very stable;
• Inexpensive.

Minuses:

• No.

OAPRIRE Headset Stand

Next we have another mountable stand from Oaprire. Like the AmoVee device, the model has a glossy acrylic appearance and an even more minimalistic approach.

The stand can be mounted on the wall with virtually no hassle. There is no need to drill anything here, which is very clear from the very beginning. The device rests entirely on the adhesive tape on the back of it. Moreover, the kit includes two stands, as well as two simple rubber clamps designed to secure cables. The adhesive is surprisingly strong and no headphones or headset will feel too heavy. The only obstacle is the good old tendency of glossy surfaces to attract dust and fingerprints.

Pros:

• High stability thanks to strong adhesive;
• Minimalistic and discreet design.

Minuses:

• Dust and fingerprints easily remain on the glossy surface.

AmoVee Headphone Stand

A simple, no-frills headphone stand with a stylish, minimalist design. The stand itself is quite stable and fits well with most headsets without taking up too much desk space.

In addition, the device comes in two versions: standard black with an opaque glossy surface, as well as translucent, which is better suited for headphones and headsets, mostly white.

One issue that isn't immediately apparent is the fact that the stand is very light. This is why the device may feel a little unstable, especially if you put on or take off the headphones with one hand.

Pros:

• Minimalistic design;
• Very inconspicuous;
• Available.

Minuses:

• Not the most stable stand;
• Dust and fingerprints easily remain on the glossy surface.

6amLifestyle Headset Stand

Next comes a somewhat unusual option from 6amLifestyle. This company's stand is made of metal and actually attaches to the side of the desk with a clamp, which can be very useful for those who are short on work space.

The attached clip is surprisingly stable and, like the stand from AmoVee, comes in two options: black and white. In addition, the silicone cushioning allows you to tighten the clamp securely without the risk of damaging the table surface.

All things considered, the stand is durable enough for everyday use, although it doesn't feel particularly stable when placed on a curved surface, despite being advertised as such.

Pros:

• Solid metal structure;
• Sustainable.

Minuses:

• Not as stable on rounded surfaces.