How to weave baubles from floss: patterns and instructions for beginners. Video lessons

Recently, woven bracelets made of thread or wire have been gaining popularity along with the boho style, which involves a large number of hand-crafted accessories. Therefore, now is the time to learn how to weave bracelets from threads - especially since it is not so difficult.

Anyone can weave a light bracelet from threads with their own hands, and it will take no more than half an hour.

In this article, we have prepared for you simple weaving of thread bracelets and a detailed story about what baubles are, what they are, and what each type of woven bracelet means.

Methods for securing a thread

First, secure the threads in any of 4 ways:

• Use a wide clip on cardboard, book or notebook.
• Using a regular pin, tying knots on it, and then attaching it to a pillow or any fabric.
• Tape it to a table or other hard surface.
• Using a special tablet with a clip (sold in stores).

It should be remembered that when fastening, the threads must be positioned according to the color scheme of the weave. When the floss is securely fixed, we begin to study the main knots.

Summing up

It is worth noting that not only jewelry can be made from laces. They are used to make clothing accessories, children's toys, interior items and other stylish items. Many needlewomen have turned this hobby into a profitable business. And satisfaction from the work and the result obtained lifts your spirits for a long time.

Many people these days are interested in making crafts. After all, modern fashion tends to return to elegant simplicity. And it’s not difficult to master weaving bracelets from laces - the main thing is to have the desire.

Technique for performing the main components

When weaving baubles, only four basic knots are used:

• main left;
• main right;
• half (left and right);
• flat (straight).

Baubles are very easy to make if you follow the weaving technique.

Tatting

• The thread is wound to the right from the base and circled over the top. Goes through the loop from below.
• We tighten one knot to the base.
• The second node is created in the same way. It comes in from below, circling the base and passing down through the loop.
• Unlike the first knot, the current one is not tightened so much.

The thread goes to the left and the right-hand weaving is mirrored. Following this direction is extremely important when weaving bracelets. In this way, the colored threads that form the pattern move to the place where they are needed to create a new row.

Bauble made of 2 threads

The simplest bracelet can be woven from two threads.

To make it easier to navigate and not confuse the sequence of steps, use 2 colors of floss thread, for example red and blue:

1. Take 2 threads with a length equal to 3 wrist circumferences. They are tied together with a regular knot. Secure with a paper clip on a solid base (book).
2. Make a main left knot. To do this, take a red thread, place the corner on the left above the right (blue) thread, bring the tip of the red thread inside the corner and tighten the knot.
3. Perform the main right knot. Now the blue (right) thread is laid with a corner to the right above the red one, its tip is brought inside the corner and the knot is tightened. Alternate the knots until the bauble reaches the required length. The remaining ends of the threads are tied together, then connected to the knot made at the beginning of weaving the bracelet. Excess threads are cut off.

After you have learned how to weave floss baubles with two threads, you can move on to more complicated patterns. For beginners, it is worth mastering how to make a braided bauble from different numbers of threads.

Features of weaving cord bracelets for beginners

Baubles from this material are made in plain and colored ones. Materials can be purchased at stores selling haberdashery, accessories and fabrics. There are leather, velvet, satin, nylon and twisted waxed threads. The founder of this type of needlework is the weaving technique of macrame .
For those who have never created such bracelets, we advise you to start with the simplest models . They are no less attractive than complex weaving. Even a child can cope with them. Simple nodes are used in the work. Such as flat square or “Turkish head”. The work will take a minimum of time when using the most ordinary base, but the result will exceed expectations.

You can start learning from hand-twisted floss threads, and then purchase more practical materials.

Braid of 4 strands or other even number

Weaving baubles with a braid from an even number and an odd number has slight differences.

First, it is important to disassemble the 4-strand braid pattern:

1. Tie the ends of 4 threads and secure them with tape on any smooth surface (board, book, table)
2. Thread 1 is thrown from left to right over thread 2 and under thread 3. They will be arranged in the following order - 2314.

3. Thread 4 is placed from right to left under thread 1 and above thread 3. Their order becomes 2431.
4. Repeat point 2, but now the outer thread 2 is thrown over 4 and under 3.
5. Repeat point 3, only the rightmost thread 1 is thrown to the left under 2 and over 3.
6. Continue weaving to the required length, at the end tie a regular knot and trim off the excess material.

For a 6-strand braid, the knitting sequence is the same as for 4:

• Tie the ends of 6 fibers in a knot and secure them with tape to the surface.

• The left outermost thread 1 is moved to the right above thread 2 and under the 3rd.
• The right extreme thread 6 is placed to the left under the 5th, above the 4th and under the 1st. Their order becomes 236145.
• The leftmost fiber 2 is shifted to the right above the 3rd and under the 6th.
• The rightmost fiber 5 is placed to the left under the 4th, above the 1st and under the 2nd. The fiber order becomes 365214.
• So continue knitting until the required length of the product. At the end, a simple knot is tied and the excess fibers are trimmed.

The principle of weaving a product from an even number of fibers is as follows: the leftmost fibers of the floss are placed to the right, first above the next fiber, and then under the next one. And the rightmost fiber is the opposite - first it is shifted to the left under the next fiber, and only then over the other. This weaving is used in the manufacture of wicker baskets.

Double flat

It is also called “square”. The most common type, the basis of many patterns and combinations. It consists of two flat nodes (hence the name) - right-sided + left-sided = square. The scheme is as follows:

1. Take two meter lengths and place them on the base so that the long end is 80 cm and the short end is 20. The base can be a cord, some kind of protrusion, a wooden plank, a ring, etc.
2. It is better to start weaving from two laces on the left. The long one needs to be laid on top of the short ones, and the right one should be passed under them so that it comes out between the long one and the short left part.
3. Tighten the knot.
4. Mirror the same on the right side.

Note!

• How to properly make a birdhouse with your own hands from scrap materials: we create an original birdhouse according to sketches

• How to make candles with your own hands: instructions for making wax, gel, scented, homemade decorative candles with a wick

• What you can make from foamiran with your own hands: we create flowers, Christmas tree decorations, snowflakes, three-dimensional paintings (photo + video)

Tip: to make the chain even and tight, the knots need to be laid as close to each other as possible.

Braid of 3 strands or other odd number

The easiest way to make a bauble is to weave a braid of 3 strands.

To do this, take 3 threads (can be of different colors):

1. Tie the ends of the threads with a regular knot and secure them with tape on a hard surface (on a book, board). Let it be red A, blue B and yellow C.
2. Throw red A over blue B, and yellow C over red A. Now the threads will have the arrangement: B-C-A.
3. Continue in the same order: left thread in the middle, then right thread in the middle. Secure the pigtail with a knot.

Weaving jewelry from 7 threads:

1. To weave a bauble with a braid of 7 strands, secure the tied ends with tape on a flat surface.
2. The leftmost thread 1 is thrown first over thread 2, then under thread 3 and 4. The rightmost thread 7 is thrown over thread 6, then under thread 5 and 1 (which is in the middle). The thread order becomes 2347156.

   
   To understand how to weave baubles from floss, you need to study the weaving pattern in detail.

3. Proceed to the next step, repeating point B, but the outer threads now become 2 and 6. So continue weaving to the required length. When finished, the braid is secured with a regular knot. The excess is cut off. This method can be used for any odd number of threads.

The principle of weaving baubles with a braid from an odd number of fibers is that the left and right outer threads are always first shifted in the opposite direction over the first nearest fiber, and then under the next two fibers.

Multicolored for children

Children's jewelry can be woven from any materials, the main condition is that they should be bright and cheerful. A good addition would be letter beads, regular colored beads, animal figures or cartoon characters.

Tip: it’s best to make children’s lace bracelets together with your child, this will help develop fine motor skills and aesthetic taste.

The scheme is very simple:

Take any bright lace, maybe a shoe lace. Step back 2 cm from the edge and make a loop, placing the short edge on the long one. Make another one nearby, exactly the same, thread it into the first one and, holding the edge, tighten it. The entire row is done in the same way, to the desired length. Then pull the short end at the beginning of the product into the remaining loop and tighten it. Tie a knot at the top and cut off the line material. Burn the ends with a match or lighter.

Straight weaving instructions

One of the popular ways to make baubles is direct weaving. With its help, interesting drawings, patterns, names and paintings are obtained. Straight weaving is a little more complicated than oblique weaving. However, this technique will more fully reveal the topic of how to weave baubles from floss for beginners. Some threads are selected for the background and others for a specific pattern.

At the beginning of the work, all other threads are tied in one direction and the other with the outer leading thread. It looks like zigzags. This is the background color.

When knitting a pattern, its thread ties the leading thread and goes in a different direction, while the leading thread is free.

It's best to start with a simple two-color design:

1. Take 5 threads of floss of blue (or another) color for the pattern, one meter long, and one for the yellow background, 8 meters long. At a distance of 10 cm from the end, tie a knot and secure the short part of the fiber with tape to a smooth surface. The long yellow fiber should be in the bundle on the left.
2. With the main left knot, yellow fiber 1 is braided in turn with all blue fibers (2, 3, 4, 5, 6) - this is how the first row is obtained.
3. Second row: the same yellow fiber, only with the main right knot, is used to tie the first blue fiber on the right 6.
4. Alternately, blue fibers 5, 4, 3 are tied to the yellow fiber with the main right knot. Finish the second row by braiding blue 2 with a yellow thread.
5. The third row is led by the main left node. First, blue 2 is tied with a yellow thread, then blue 3 is tied to yellow. Again yellow blue 4, blue 5 yellow and yellow blue 6.
6. The fourth row is performed in exactly the same way as the second row. The drawing cycle has ended.
7. From the fifth row, all operations are repeated, starting from step 2.

The technique of oblique weaving floss baubles uses the same basic left and right knots.

Josephine

Its other name is bow. Consists of two intertwined loops and is usually part of a pattern.

1. Take the bracelet cord and cut it in half. From the first fragment, make a loop with the running end thrown over, and place the second fragment on top of it.
2. Pass the end of the second segment under the root end of the first and over its running end.
3. Bring the running end of the second under the loop of the first fragment, and it should pass over the second fragment.
4. Pull the loops and straighten the knot.

Oblique weaving instructions

Oblique weaving is considered classic. It most simply reveals the question of how to weave baubles from floss for beginners. There are 2 options for making oblique weaving.

First option

This weave includes only one basic knot - the main left or the main right. This knot is repeated on all rows until the end of the product. For clarity, it is worth considering oblique weaving with the main left knot. Take 2 threads, for example pink and blue, 100 cm long.

Weaving:

1. First, tie all the threads into a knot and weave a regular braid 0.5 cm long. The end is secured with tape to a hard surface. Distribute 2 blue and 2 pink threads sequentially.
2. The leftmost blue thread is the working thread. Use it to make the left corner above the right blue thread and bring it inside the corner, tighten the first knot. Repeat the actions.
3. Using the same thread, the main left knot is performed alternately over the remaining two pink threads. Thus, the first blue thread becomes the rightmost one.
4. The same actions are carried out with the next leftmost threads. The result is an alternation of 2 rows of blue bauble and two rows of pink. Tighten the knots carefully so that the rows are even.
5. Having knitted the required length, finish the bauble with a braid, after which a knot is tied. They cut off the excess and get such a bauble.

Second option

The bauble is an arrow or “on the corner”, also known as “braid”. In this version of oblique weaving, both main knots are used - left and right. The result is an arrow-shaped pattern.

Weaving:

1. Fasten the tied ends of six threads of 3 colors to the book with a paper clip. The colors are arranged in the following sequence: at the edges there are 2 blue, then 2 red and 2 yellow floss threads.
2. The left extreme thread (blue) is braided with the left main knot in succession with the red and yellow threads on the left. The rightmost (blue) knot is tied with the right main knot, the right red and yellow threads. Knit two blue threads together using a left or right main knot. Now the blue fibers have become central, and the red fibers are outermost.
3. Repeat all steps as in point B, only with the outermost leading fibers of red color. After this step, the red fibers become central.
4. With the left extreme yellow thread, two threads on the left, blue and red, are knitted with the left main knot. The right extreme yellow thread is used to tie two threads on the right, blue and red. The yellow threads in the center are woven together using a left or right main knot.

This is how the bauble is sequentially knitted to the required length. At the end, tie a regular knot and remove it from the base. Connect the ends of the baubles together, and carefully trim off the excess material. The bauble has a pattern in the form of an arrow.

Satin ribbons

The weaving principle is similar, but the knots remain in a free position.

1. Making bracelets with your own hands is an exciting activity, but it requires perseverance and attentiveness.
2. Create your own version of the bauble using different weaving techniques and adding various pieces of jewelry.
3. Give a gift to your family or friends. Stand out from others with an exclusive symbol on your hand.

So, we figured out the topic - how to weave thread baubles for beginners. This craft perfectly reveals the creative potential of the manufacturer. When creating, leather cords, household ropes and even herbs are used.

Decorations can include stones, pendants, zippers, medallions, buttons, washers, nuts, flowers, bark, leaves, etc. This is a good opportunity to emphasize your own style, putting your whole soul into your work.

Some people like to insert short words to reveal the symbolic meaning of the bracelet. And other craftsmen like to decorate the product with complex patterns with additional decorating objects. How would you decorate your bracelet?

Two-color weave

Take an even number of meter threads of floss, 4 blue and 4 pink:

1. At a distance of 8 cm from the edge, tie a knot and secure it to a hard surface with a wide paper clip.
2. The threads are distributed in pairs: two blue and two pink.
3. The weaving is not continuous, but paired with a flat knot. In the first row (and subsequently in all odd rows), the leftmost blue pair is knitted with a flat knot and set aside. Then the remaining 3 pairs are woven, putting them aside one by one.
4. In the second row (hereinafter in all even rows) the first and last threads are not knitted, they are simply set aside. Weaving is done from left to right, also with a flat knot, putting the knitted pairs aside.
5. The third and all subsequent odd rows are woven as the first row, the fourth and all even rows as row 2.

This version of two-color weaving from floss is very easy to do, because there is no need to count the number of knots. The bauble turns out dense. It can be used as a watch strap.

What types of cords are there?

There are different types:

• leather;
• metal;
• polyester;
• textile;
• rubber;
• twine;
• paracord

But most often they use:

• waxed;
• nylon;
• suede.

Waxed

They are strong braided or twisted cords made of cotton or synthetic threads impregnated with wax. The product range is represented by a large color palette (about 20 shades), allowing you to choose the ideal color for your future decoration. Due to wax-impregnated cotton, a waxed cord bracelet is dense and practical.

Nylon

A thin twisted product, the same rope, only of a smaller diameter, has great flexibility and can withstand high loads. Typically used to create unusual patterns. Nylon ends are easily scorched, therefore, the master can weave the cord into absolutely any pattern.

Suede

As a rule, they are made of durable and, at the same time, soft leather, giving them a beautiful velvety surface. Despite the elegant texture, such jewelry is durable. The color range is also large - 9 primary colors, each with from 3 to 12 halftones. But they require careful treatment and constant care, otherwise the suede will wear out and the jewelry will lose its attractive appearance.

Tip: you can use different cords in one product, but it is important to remember the right color combinations so as not to overload the composition.

How to weave baubles with names

Before you start weaving a bauble with a name, make a diagram. To do this, all the letters of the required name from the proposed letter schemes on the Internet are entered in a box on the sheet.

A cell corresponds to one node.

Weaving:

1. The length of 8 yellow threads for the name is taken equal to three turns around the wrist and one thread for the purple base is 7 times longer than the yellow ones. Tie the threads in a knot at a distance of 8 cm from the end and secure with tape on the surface of the book.
2. In the first and third rows, all yellow threads are tied with a purple thread with the left main knot. In the second and fourth rows - with the right main knot.
3. In the fifth row, a yellow base is knitted with a purple thread using 7 main left knots. The beginning of the name (letter T), the eighth knot is braided with a yellow thread on the purple (working) thread and the row is completed by braiding the yellow thread with a purple thread.
4. Using the direct weaving technique and knitting each name cell according to the pattern, they finish the bauble with four rows of purple.
5. At the end of the weaving, all the threads are tied in one knot, connected to the beginning of the bauble, and the excess is cut off.

Square knot for bauble

The easiest way to weave thread baubles is using a square knot. The famous Shambhala bracelet is based on a square knot. It is woven on four threads, where the two central ones are the warp, and the 1st and 4th are the working ones. A straight flat row is formed by changing left- and right-handed nodes. Unlike other types of weaving, straight knots are tightened evenly over both the first and second knots.

Figure No. 3. Square knot.

Weaving:

1. The left thread is thrown over 2 strands of the warp.
2. The far right one is placed on the left one, goes around the bottom of the base and is pulled through the loop formed by the left thread to the top.
3. It drags on.
4. The thread that has become the left one repeats its path in the reverse order through the bottom, and the right one passes under it, goes around the base from above and is passed through the loop with the left one, returning to its side.
5. It drags on.
6. Now the weaving begins on the right in a mirror image.

Large beads and crystals are woven into such bracelets. They are strung on warp threads and tied with several rows of square knots. Or small beads (large beads) are strung onto working threads before weaving begins. In this embodiment, they remain in the side parts of the node.

Bracelet with a pattern

When you have gained some skills in how to weave baubles from floss for beginners, you can begin to work on more complex weaving patterns.

First, you can make a bracelet with a simple pattern, for example, a two-color one with hearts:

1. Study the weaving pattern.
2. Take 4 threads of red and black, 1 meter long. Step back 8 cm from the end and tie a knot.
3. Fasten the short part with a wide clamp on a flat surface. Arrange the fibers by color as shown in the diagram.
4. Weaving is done in pairs. In the first row, the left half knot is made with the first black and second red threads. The black thread is placed with the left corner above the red thread, brought inside the corner and tightened the knot. Then the black thread is placed with the right corner over the red thread, brought inside the corner and tightened the knot. The pair are set aside.
5. The second pair, black and red threads, are woven with a left knot (as indicated in the diagram). Set the pair aside.
6. The third pair of red and black threads is woven according to the pattern with a right knot and also set aside.
7. The fourth pair of red and black threads according to the pattern is made with a right half knot.
8. Row 2. The black outer threads on the left and right are removed to the side. They are not woven, as in subsequent even rows of baubles. Red threads 2 and 3 are knitted with a left knot and set aside.
9. Black fibers 4 and 5 are knitted with a left knot and set aside.
10. Red fibers 6 and 7 are knitted with a right knot and set aside.
11. Row 3. They also begin to knit from left to right. The first black and second red threads are knitted with a right knot and set aside.
12. Red 3 and black 4 are knitted with the left knot and left.
13. Black 5 and red 6 are tied with a right knot and set aside.
14. Red 7 and black 8 are woven with a left knot and set aside.

Next, weaving is carried out according to the diagram. It is very important to monitor the tension of the knots. They need to be tightened tightly so that the design on the bauble does not twist and is clear.

Necessary materials

How to quickly and correctly make a bracelet from a cord, what materials and tools are needed - these are the first questions that arise for people who decide to make their own jewelry.

First, you need to prepare your workplace. It should be bright and spacious, nothing should interfere with work. Depending on the type of weaving, you will need to use either a solid cushion to pin the edges to, or a rod to which they are tied.

Note!

• How to make wooden shelves with your own hands - original design options

• Kinusaiga technique for beginners: what is it, a description of creating paintings from threads
• How to weave a figurine from rubber bands: how to learn to weave animals, toys and what you can make from rubber bands on a slingshot

Next comes the choice of material, shape and size. If you plan to make jewelry from laces and beads, then they need to be selected in such a way that they fit the size of the hole with the cord and harmoniously match in color.

Advice: it is advisable to think in advance about what clothes the accessory you have made will be worn with, so that it matches the overall concept of the outfit.

The next step is choosing a lock. There are many devices designed to fix the finished product on the hand. These are special latches, toggles, hooks, carabiners, clip locks, magnetic locks and others. It all depends on the preferences of the master.

And the last, but very important step is choosing a scheme.

Weaving methods with rhinestones and beads

Any bauble will look more impressive if you decorate it with additional beads or rhinestones. The easiest way is to sew beads or rhinestones with matching threads to the finished bauble, as your imagination allows.

The second method is to weave beads into the process of making a bauble using a flat knot. As a warp, take 2 threads of the same color as the 2 leading threads.

Weaving:

• The first 3-4 cm of the bauble is woven with a flat knot without beads. Next, add 1 piece to each node. beads on each side of the base.
• The last 3-4 cm of baubles are made without beads.
• Fastenings are made with two simple braids.

Rep

• A thread comes from the right side and is drawn over the warp. Then from the bottom side it goes on top of itself.
• The first and second knots are tightened.

The left-hand weaving process is similar to the first. You can already start weaving simple baubles after mastering at least one rep knot. If you ignore the directions and braid the base with a rep knot, you get a spiral bracelet.

Next, we will discuss jewelry items for a hand bracelet.

What to do if the thread runs out

When weaving embroidery floss, one of the threads may break, or it may run out, and the work must continue.

In this case:

• Bring the finished thread to the wrong side.
• Take a thread of the same color and put it in place of the previous one.
• The upper end of the new thread is tucked into the wrong side and tied with two knots of the leading thread.
• On the wrong side, the old and new threads are tied in a knot.
• Continue weaving on the front side of the bauble according to the chosen pattern.

Rhinestones, stones

We take a ready-made bauble and a chain of jewelry: rhinestones or stones on a sewn-on base. We use a needle with thread that matches the tone of the bracelet. Next you will need scissors and glue. Strips of rhinestones and stones are sewn onto the bracelet using small stitches.

How to make a clasp

There are several options for fastening baubles.

Option 1 - braided fastener:

• Thin braids are braided from both edges of the baubles.
• After 1 cm, the braids are connected, the fibers are divided into 3 bundles and the braid is braided.
• At the end the braid is tied with a knot. Get a noose.
• The braid of the other end of the bauble will be inserted into the finished loop and serve as a clasp.

Option 2 - tying the two ends of the braids with a separate thread:

• The braids of both ends of the baubles are temporarily secured together.
• These braids are tied in a square knot with a separate thread.
• Finish weaving the thread with a double knot.
• Remove the temporary fastening.
• To prevent the ends of the threads from unraveling, they are treated with transparent nail polish.

Option 3 - Velcro, button, button:

• After finishing weaving the bauble pattern, cut off the excess threads, leaving a small end.
• Glue it to the wrong side and sew on the selected fastener.
• Velcro and buttons sew one half to the front side and the other to the back side of the bauble.

Once the necessary basics have been mastered, it will not be difficult for beginners to weave simple baubles from floss, and you can also draw your own patterns of designs yourself. On the Internet you can find complex designs of baubles on various topics: emoticons, New Year, sweets, plants, Halloween, flags, etc.

Clasps for braided bracelets

Weaving baubles from threads is only part of the story. It is necessary to think over and create a clasp for them to wear on your hand. You can buy sets of jewelry clasps in the store, or you can weave ties for your thread masterpiece yourself.

This can be a “loop-button” fastener, “double loop-tie” or simply “tie”. For example: “fish tail”. It is woven like a regular braid, but with more threads. The threads are taken one at a time on each side and woven into one braid. This tie ends with a common knot. The ends of the threads are trimmed.

Examples for inspiration

To create a beautiful bracelet, you can use ready-made examples. They will serve as a source of inspiration and help you get a neat and high-quality result. Moreover, today there are many interesting options.

The double bracelet looks very nice. You can make jewelry with Dzi beads. A men's bracelet would be a stylish option.

What is the art of macrame

Macrame is a knot weaving technique. This is an applied art that was originally purely practical in nature. At the dawn of its appearance, knot weaving made it possible to make gear, clothing and other useful things.

Over time, weaving develops from a routine into an art. Needlewomen are able to create masterpieces with minimal time investment. The technique also brings benefits to the body. It helps to concentrate and develops fine motor skills.

Beginning of work. Fastening threads

Macrame for beginners (weaving patterns are not all that needs to be mastered) needs to be mastered in preparation for work.

Threads are sold in skeins. To work, they are cut into the required lengths. Then they are fixed on working tools (horizontal or vertical). Tip: It’s better to learn on large cords. They are easier to work with and the nodes are more clearly visible.

There are several simple ways to attach threads:

• they are folded in half and fixed with clubs (if the horizontal method is chosen for work);
• they are secured with tape (if they do not need to be folded in half);
• they are tied in a simple loop (if the vertical method is chosen for work);
• they are tied into a strong complex loop when it is planned to attach weights to the ends.

It is also better to immediately treat the ends of the threads with fire so that they do not fall apart during work. If the material is natural, you don’t need to do anything with it. At the end of the work, a strong knot is tied at the very end.

History of the Shambhala bracelet

Before we learn how to weave a bracelet from beads and cord, let’s get acquainted with the history of this jewelry.

Shambhala is, at the moment, a non-existent country in the mountains of Tibet, which is described in many legends and tales not only of the peoples of Asia, but also of the indigenous inhabitants of Altai.

It is believed that the first bracelets were worn by Tibetan monks; they wove beads, precious stones, and gems into the lace. Such an amulet reliably protected its owner from the evil eye, poison, bad thoughts and enemies.

It is reliably known from ancient Russian chronicles of that time that residents of the Altai Territory and nearby settlements wore bracelets of this type.

This bracelet was introduced into the modern fashion industry by two brothers: Mads and Mikel Cornerup. Since 1994, such jewelry made of precious metals and stones began to be produced under their brand. The brothers combined Scandinavian, Asian folk art, yoga practices and Indian symbols in their collections.

But you can weave such a bead bracelet with your own hands. Let's find out how to do this quickly and easily, and the master class will help us!

What threads are suitable for weaving

There are many options for threads for macrame. Each has its own characteristics. The choice is usually made based on the item that is planned to be made. You can see the popular types in the table below.

Video master class

Weaving options

Double and triple weaving looks very attractive, but requires skill in manufacturing. For such products you will need to stock up on strong threads and beads.