We bring to your attention a huge scope and the best selection of ideas for creativity from the site dnevnikmastera.ru on the topic of fake modular origami.
Origami is a unique art of paper modeling that came to us from the East. Modular origami combines design elements. This is one of the "branches" of the original origami, which is often recommended for beginners or children. Modular origami perfectly stimulates the development of spatial thinking, has calming anti-stress properties, and allows you to express your imagination on an unlimited scale.
Next, we will look at the main crafts from origami modules for children and beginners.
Today there are quite a lot of different sources of inspiration for creativity. In fact, everyone can find something to their liking for development and hobby. One of the most popular types of creativity today is modular origami.
Stunning geometric three-dimensional models become a real form of art, since this work requires not only careful attention, but also a painstaking approach to modeling.
Brief description of the technique
Each sculpture consists of dozens of triangular shapes, but when completed, the model will appear as one wavy structure.
The duration of the manufacturing process will depend on the size and number of parts being introduced. There are several ways to fasten the structure:
- Use regular transparent glue, such as a pencil. You should not fasten the parts with PVA; over time, yellow spots will appear, which will affect the aesthetics.
- Use thick and matte paper. Cardboard and glossy sheets are not suitable. The design will hold up perfectly if all the parts are made from simple album canvas or whatman paper.
Paper that is too thin, such as that used for printing, will cause the shape to change. A few days after assembly, the structure will begin to fall apart, since the thin ribs of the parts will not be able to cope with the load.
Even though this art form dates back to around 1734 (as mentioned in the book Ranma Zushiki by Hayato Ohoko), it still generates interest today.
The principle of creation has not changed over several centuries; the classic structure consists of a large number of triangles. Photos of modular origami can surprise even an adult.
Best material
The most popular basis for modular origami is special office paper. It has a number of necessary properties for the manufacture of modules:
- not glossy, but slightly rough, does not slip out of the grooves prepared for collecting the figures;
- dense, the workpiece from it is strong and holds its shape well;
- when making complex models, it becomes necessary to glue different parts of the figure, and thick paper does not get wet under the glue;
- Easily cut into sizes required for work.
In addition to the specified material, wrapping, packaging and foil paper are suitable for work.
How to make a triangular module
As mentioned earlier, for production you need medium-weight paper. A4 landscape sheets are suitable. Each will be divided into 16 or 32 equal parts in the form of rectangles.
It is worth remembering that each module must be dense and even; stiffening ribs are of great importance, due to which the structure will be more stable. Modular origami assembly diagram:
- The rectangular part is first folded horizontally. Next, an even bend appears in the middle.
- The sheet is straightened and folded into two identical squares.
- Next, the sheet is straightened again, two triangles are assembled along the resulting lines, their ends should be proportional to each other.
- Smaller triangles are made from the remaining part, after which the structure is connected by placing the corners in the formed pockets.
The number of elements will depend on the figure that the master plans to make. Beginners are recommended to use ready-made diagrams, where the number of elements is indicated in detail. Everything is quite simple, first the modules are created, after which they are simply connected into a figure.
Making flowers
Looking at photographs of crafts made from modules on websites, you immediately notice that flower designs are the most popular among origami lovers.
A figure made from small modules is graceful and elegant. Such bouquets of flowers are usually used to decorate tables and are presented to girls on women's holidays or birthdays.
Large modules are used to make large flowers. They decorate rooms in which special events take place.
How to make fish
This option is suitable for novice craftsmen; it will help hone their skills in assembling modules. You will need:
- 17 pink elements.
- 23 pieces blue.
- 1 piece black.
Once the modules have been assembled, you can begin assembly. Step-by-step diagram of modular origami for beginners:
- first, two blue and one pink modules are connected;
- third row - one blue, black and pink;
- Next comes 4 pieces of blue;
- after that again 5 pieces of pink;
- then 6 pink ones;
- 5 blue, fins added;
- penultimate row - 2 pieces blue;
- last 1 pink.
After this, you can add 3 more pink modules to make the design look more realistic.
Autumn applications
Applications will always help out if there is very little time left to create an enchanting art object. You can cut fruits and vegetables according to the diagrams suggested below, and then create a personal masterpiece.
Simple applications are suitable for working even with kids. For older children, offer more challenging work.
You can make fruit and vegetable “slices” using colored paper and disposable utensils.
Colored paper harvest can be used both to decorate costumes and to decorate the hall.
How to make an origami swan
Making a modular origami swan is quite simple. The only difficulty lies in the large number of elements.
To make this figure you will need 215 triangles. Therefore, it is worth preparing 7 sheets of plain paper in advance, first dividing each sheet into 32 rectangles.
Step 1
Before starting work, be sure to study the detailed diagram. The figure should be voluminous and even. How to build a good module:
- First you need to take one of the rectangles.
- Next, fold it in half lengthwise.
- After this, fold in half widthwise.
- Expand the fold widthwise.
- You should now have a rectangle folded in half with a fold in the middle.
- At this stage, the top of the rectangle (the folded side) is aligned with the central fold.
- The same thing is repeated with the other side.
You should end up with a piece of paper in the shape of a pentagon, the two sides of which meet in the center.
Step 2
The triangle has two pockets and corners. Each fits in a pocket, which creates a fastening. As parts are made, they can be stacked. This will help you quickly open the pockets to make the structure more durable, as well as calculate the parts.
If the design does not work out and you need to rearrange the parts, you need to remove the triangles from the stack. To do this, simply place your thumb directly under the first triangle and push upward.
The first two layers of the swan are the most difficult. This is because there is no structure yet. First you need to make twenty pairs of parts. Since this is the first layer, you need to create a “stand”. If this is not done, the modular paper origami will be unstable on the table. Next you need to connect twenty pairs together to make a ring.
Step 3
Once the master makes the third and fourth layers, everything will become much easier. With the addition of a third, the structure can be lifted, thrown, etc. It will retain its shape during any manipulation. The fourth is done to secure the base, using the same technique. Next come 5 and 6 - this is the base of the body. To do this you will need 40 envelopes.
After this, you need to pay special attention to the wings. They are made using 36 parts. You can start from any two points of the sixth layer. Add eight modules to form the beginning of the wing. These eight parts form the seventh layer of the body. Next comes the eighth row, to do this you need to skip the first point of the 6th layer and add another module. After this, the remaining rows are made according to the same decreasing principle.
The neck and tail are the final details of the design. After the wings are formed, a small gap remains at the back; it is filled with the remaining modules. The neck is formed on the basis of the added modules in the 7th row; the triangles are assembled upward along the chain.
If some parts turn out to be unstable, they can be glued. When creating the first row, tail, wing tips and head, you can use colored modules.
And the lotus and the vase
To work, you will need to prepare a large number of modules:
- 240 light pink;
- 126 dark pink;
- five dozen yellow;
- 318 green blanks.
We will explain below how it is possible to transform a flower into a vase.
Progress
Making a lotus begins with working on the leaves:
- a couple of elements are inserted into the green blank, and then one triangle is added and we get a strip of seven geometric shapes;
- each subsequent stripe should have one less element;
- two sheets are connected to each other using additional four modules inserted on the back side of the blanks;
- all six blanks are fastened to each other;
- In the same way, we carry out the operation with light pink blanks, making them bud petals. The first strip should have five triangles, and the rest, each time, one module less;
- the decorated parts are placed in a row, and dark pink triangles are used for connections;
- a two-color strip is folded into a ring;
- the bottom of the flower is laid in three rows, with the obligatory alternation of blanks of different colors;
- the core of the flower is made of several rows of yellow modules;
- the finished bud is placed in the foliage.
Well, how to turn a lotus into a vase? Just take out the core of the flower and a magical transformation will happen!
Photos of modular crafts using origami technique
Vintage corrugated cardboard
We bought corrugated cardboard and made a three-dimensional applique. The manufacturing principle is the same, but the result is much more interesting than a flat paper applique.
Quilling harvest
The art of paper curls is conquering the world! Let's keep up with fashion trends and make autumn crafts using this technique.
Fruit wrap
Non-standard crafts with filling take first place in the competition! The manufacturing principle is simple: available materials are wrapped in paper, painted, decorated and served “to the table.” For “stuffing” the following are suitable: polystyrene foam, toilet paper, toilet paper roller, plastic balls, fabric.
The combination of flat appliqué and volumetric objects on the table looks more impressive.
