- September 15, 2018
- Prostate
- Maria Ivanova
Many men face a disease of the genitourinary system such as prostatitis. Unfortunately, the patient usually does not show symptoms during the early stages of the disease. Only the progression of the disease leads to the patient deciding to visit a urologist. Most often, after a series of diagnostics, the patient is prescribed complex treatment, which consists of taking medications, as well as a course of prostate massage, which is performed by professionals. But there are special devices that make it possible to perform massage right at home. Such healing massagers can be bought in special stores; some make such stimulants with their own hands. It is important to determine how to make a prostate massager with your own hands.
What is the device for?
Before creating a homemade prostate massager, it is important to familiarize yourself with the main indications and contraindications for its use. This will help you understand whether you should use such a device or whether you can do without it.
Prostate massage with your own hands or specialized massagers helps:
- improve trophism of the prostate gland;
- prevent stagnation of prostate secretions;
- restore the process of local blood circulation;
- protect the organ from disease damage.
Do-it-yourself prostate massage at home is the best way to prevent congestion. When stimulating the prostate with fingers or specialized devices, metabolic processes are restored. This helps improve the outflow of prostate secretions, restore blood circulation in the organ and lymph flow in the pelvic area. Regular prostate massage helps to avoid the development of disorders in the prostate gland, enhance potency and sexual activity, and eliminate problems with the prostate gland.
In addition to prevention, this procedure is also used to eliminate a non-infectious inflammatory process, the development of which is caused by the outflow of prostate secretions. The congestive form of prostatitis most often occurs due to a sedentary lifestyle, sedentary work, and lack of sexual activity. Self-massage of the prostate or a procedure performed by a treating specialist helps to quickly relieve congestion, as well as restore the functioning of the prostate gland.
Recommendations when buying a massager
In general , you need to understand that although a urological massager for the prostate or another sounds humiliating, there is nothing shameful about it at all. Do not put off visiting a urologist until later. This can lead to serious and sometimes terrible complications or even death.
It should also be noted that the vibration massager has its own
teaching is also not a way out of a difficult situation. The purchase of such a device is only a commercial move by the pharmacy. That is, such a purchase must be made at a medical institute and only after the doctor’s permission. Otherwise, a result may occur in which an unsuccessful purchase may serve as a “collateral” for serious consequences in the form of operations.
After purchasing, you should definitely ask your doctor how to use the massager. These tips can help not only use it correctly, but also avoid consequences. Thus, the peculiarity of healing the prostate is that all kinds of deviations from generally accepted standards of medicine are fraught with complications. And according to statistics, for several thousand such complications in urology, there are about several or three deaths.
Thus, there is no need to be ashamed of your own illness or avoid visiting doctors. Moreover, there is no need to be ashamed to ask about all the nuances of this disease for the sake of preserving your own health.
When is it appointed?
The use of a special device for prostate massage is indicated for:
- physical inactivity;
- problems with potency;
- the presence of congestive prostatitis;
- in the absence of regular sexual intercourse.
Potency problems are most common in adult men. A self-made prostate massager helps eliminate lesions in a short time by stimulating blood circulation in the pelvic organs. It is for this reason that prostate massage is important for anyone who monitors their health and wants to avoid illness, and not treat it in the future.
What devices can be created?
It is quite simple to create prostate massagers with your own hands, but first it is important to decide on the type of device that is needed to combat the pathological condition. All massagers are divided into several types - invasive and non-invasive. An invasive massager effectively acts on the prostate gland through the anus. This method of influence has both its advantages and distinct disadvantages. The main advantage of the massager is its direct effect on the prostate, which helps enhance the effectiveness of therapy. Below is a photo of a prostate massager. How to make such a device with your own hands?
The main disadvantage of a prostate massager is rectal administration, which is unpleasant for some men and is often complicated by psychological discomfort.
Non-invasive massagers act through the perineum. They restore blood circulation by irritating the tissues of the perineum, but they do not affect the diseased organ itself. This product is inferior in effectiveness to many invasive massagers, but is used most often by men, since it does not require rectal administration.
Finishing
How to make a plaster cast of a hand into a finished composition? To do this, it needs to be painted. For some, the ideal option would be tinting with gold or bronze paint. Another will choose nude or white.
Acrylic emulsion is suitable for decorative coating, but its layer, although thin, can smooth out small lines and folds on the cast. Although, if the copy turned out to be imperfect, then this option is quite suitable. If you need to preserve the smallest details, it is better to use spray paint.
Before finishing, the cast is inspected, all irregularities are polished, and defects are corrected. In order for the paint to lay down in an even layer, the workpiece can be pre-primed, allowed to dry and then sanded again with fine sandpaper.
For installation, select a decorative base at your discretion and mount a copy of the hand or a composition with it on glue. After drying, the souvenir can be varnished for greater effect.
Creation of an invasive device
The principle of creating a prostate massager with your own hands will directly depend on the chosen method of influencing the organ. To make a device that will be used rectally, you need to purchase a special compact electric motor with good vibration. You can also use a motor from an old electric razor, a children's toy, or any other device that creates minimal vibration to create a prostate massager with your own hands. More information about this can be read below. Below is how you can make a prostate massager with your own hands. The photo shows that a homemade device can be assembled from scrap materials.
The motor should be installed in a special housing, which will reduce the force of vibration and will be convenient during the procedure itself. To create a housing, you can use silicone heat pipes, plasticine, and even simple plaster. The easiest way to construct a body is from gypsum - it won’t take too much free time or money. The main thing in this case is to dry the plaster thoroughly before use (for several days).
The motor is placed in the finished housing and firmly fixed. In order for the device to be easy to use and freely inserted rectally in size, it should be made no more than 7 centimeters in length and 5 centimeters in diameter.
Before performing an independent rectal massage with such a device, it is important to consult with a treating specialist. Most often, you just need to turn on the device, insert it into the rectal opening and act on the prostate for five minutes. This is enough to obtain a lasting therapeutic effect. The finger attachment for prostate massage is shown in the photo.
For the hygiene of the procedure, it is important to use a simple condom, which should be changed before each insertion of the product into the rectal opening. This will help eliminate the need to clean the massager after each use. It is best to use condoms designed for TRUS. They are distinguished by their density, smooth surface, do not provoke an allergic reaction and are not covered with grease.
Photos of how to make a prostate massager with your own hands can be seen in the article. According to reviews, this is not too difficult, but many still prefer to purchase massagers in pharmacies, for fear of doing something wrong.
Simple clay mold
A trial plaster cast of the hand can be successfully cast into a clay mold. This will not be a full-fledged voluminous copy, but it will provide an opportunity to gain first practical experience. Clay is an affordable material, it can be used repeatedly after unsuccessful attempts, which is just right for beginners.
You need two pieces of board or plywood, 5 cm larger than your palm. Lubricate them and your hand with vegetable oil or Vaseline. This is necessary so that the clay does not stick. Place your hand on the board, press it tightly and begin to apply clay moistened with water and kneaded to a thick dough, pressing it well and compacting it.
The total layer should be at least 5 cm. Its top is leveled flat and covered with another board. The entire structure, together with the hand, is carefully turned over. The bottom board is removed and the palm is carefully released. The form for filling is ready. To obtain ideal castings, plastic molding compounds are used.
Non-invasive device
There is no need to make a non-invasive device for prostate massage yourself, since any item in the house is suitable for it. The main goal of this procedure is to restore normal blood circulation in the perineum. For this you can use:
- small rubber or tennis ball;
- a simple children's toy that retains one shape;
- a hard towel rolled into a tube;
- a special rubber pyramid.
The most effective means for self-massage is considered to be a tennis ball. It has the right size, and its felt structure helps to achieve additional irritation of the surface and stimulation of the blood circulation process. A photo of how to make a prostate massager with your own hands can be seen in the article.
Idea
For lovers, a plaster cast of a pair of hands clasped together can serve as a gift for a significant date. Often this composition is ordered by newlyweds on their wedding day.
Parents order casts of children's hands and feet as souvenirs in addition to photographs and videos of their children. Such a souvenir, decorated in an elegant frame, can be presented to family and friends as a memory of a memorable date: a first or anniversary birthday, baptism, a child’s first independent step, etc.
You can create a whole collection of such casts, made during different periods of active growth of the child. Later, holding them in their palms, children may remember the happy moments of their childhood.
An elegant plaster hand, made and decorated with your own hands, can also serve as a detail of an original composition. This decoration, for example, can also be used as a mannequin for storing rings.
Technique of the procedure
To carry out the procedure, a man needs to place the selected object for massage on a chair or armchair, and then sit down so that the perineum is on the object itself (for example, a ball). It is in this position that you need to start performing various movements - rotations, slow rocking, pressing on the ball. The duration of the procedure is from 5 to 10 minutes, it is important to carry out massage once daily for the purpose of prevention and twice for treatment.
This method is not considered the most effective, since irritation of the prostate occurs through the perineum, unlike other invasive devices. It should be noted that when using a tennis ball as a massager, the risk of damage to the structure of the rectum is minimal, which is possible if the device is inserted incorrectly or too quickly.
What contraindications to the procedure exist?
Self-massage is allowed every day for 30 days, regardless of which massager was chosen. For preventative purposes, the time of using the massager can be reduced to several weeks. During treatment, the frequency of therapy should be increased to several times a day. To avoid complications and unpleasant symptoms during the procedure, it is important to consult a urologist, who will help recommend the correct technique for carrying out the therapy.
The main contraindications for invasive massage include:
- chronic form of hemorrhoids;
- the presence of stones in the prostate;
- the presence of fissures in the anal passage;
- inflammatory processes of the rectum.
In the described cases, non-invasive action is not contraindicated, since there is no possibility of damaging the rectum.
Absolute contraindications
The main absolute contraindications for any type of massage include:
- prostate cancer;
- progression of the bacterial form of prostatitis;
- inflammatory process in the bladder and urethritis;
- BPH;
- development of prostate tuberculosis.
Stimulation of increased blood circulation in the prostate in the presence of formations of a malignant or benign nature can provoke their rapid progression and increase in size.
In case of an acute form of bacterial prostatitis, massage is prohibited, as it can provoke the rapid spread of infection throughout the body or lead to an abscess. To avoid mistakes and complications, you should consult a doctor.
Symptoms indicating prostatitis
Prostatitis is one of the most common diseases in men.
Clinical picture:
- cutting and pulling pain in the lower abdomen, perineum and scrotum;
- frequent urination, severe burning in the urethra;
- feeling of a not completely emptied bladder;
- problems with going to the toilet (weak stream);
- problems with the quality of erection and erectile function in general;
- the onset of premature ejaculation or problems achieving it;
- feeling of malaise, irritability, weakness in general.
Each of the symptoms described should attract attention. If there are two of them, then you should not hesitate to visit the doctor.
How does the device work?
Therapeutic measures must be comprehensive and act from several sides and using different methods. One of these is massage, which can be done with your own hands or with special devices. Manual massage is performed by a professional in a clinic; for this, the doctor penetrates the rectum with his finger. For many men, such a procedure seems very unpleasant and even embarrassing, which is why they delay going to a specialist and look for other effective methods of treating the condition.
In order to avoid unnecessary psychological stress and discomfort, a vibrating massager is well suited. The device helps you perform an effective massage at home without outside help. The massager is drop-shaped, made of silicone, and has a vibration source inside the device.
The device itself is located on a triangular-shaped stand with a smooth surface; it is created by experienced doctors, so the configuration of the device corresponds to the structure of the human genitourinary system. Due to its shape, the device will penetrate to the optimal diameter (not too far, but will not fall out of the anal passage).
As mentioned above, according to the type of functioning, all devices (both homemade and ready-made, which can be purchased at a specialized store or pharmacy) can be divided into invasive and non-invasive.
Alginate for impressions
To make a mold for volumetric casting of complex shapes, special compositions are used. One of the most affordable options is alginate mass. Its main purpose is to make impressions in dental practice. But such material is quite suitable for sculptural castings.
Alginate is a raw material from seaweed. Its dry powder, mixed with water in precise proportions, quickly thickens and acquires the properties of a dense jelly. If you place your hand in such a mass before the setting process begins, and then, after achieving optimal density, carefully remove it, a cavity will form in the mold. If you pour a gypsum solution into it, after hardening it forms an exact copy of the hand.
It will not be possible to remove the casting without destroying the mold. The alginate mass is not in a state of plasticity for long; it begins to lose moisture, becomes brittle and collapses from deformation. Therefore, filling with the working composition should be done immediately after removing the hand. In this case, you can expect a high quality cast copy.
Some brands of alginate masses change color as they harden. When kneading, they have one shade, in the initial setting phase (the optimal moment of immersion of the hand) - another, after reaching density (when the limb can be removed) - a third. The process of making a plaster hand using such a molding material is within the capabilities of anyone.
Effect of invasive devices
The former are considered more efficient and effective, since during their work they simultaneously operate in several modes:
- Vibrating. This type helps improve muscle tone and speed up the release of accumulated fluid from the prostate.
- Thermal. Helps restore blood circulation, reduces the volume of fluid stagnating in the organ.
- Magnetic influence. Changes the amount of stagnant components, with the help of which they leave the genitourinary system faster. This effect also helps eliminate inflammation and accelerates tissue restoration.
Simple volumetric hand
Making this three-dimensional figure is as easy as shelling pears. Just look at the picture and the essence of the creation process becomes clear.
First, all the details of the hand are cut out - the palm, elements of the fingers. Afterwards they are connected using glue and tape or thread.
