How to make flowers from nylon: a master class on making decorative items

Did you know that decorative flowers can be made from a wide variety of materials? One of the most affordable is nylon. Let's see how to make original and aesthetic flowers from nylon with your own hands for interior decoration.

Any modern girl is very familiar with such a wardrobe item as nylon tights. Thick, ultra-thin, colored and plain - they have one thing in common: nylon tights very quickly become unusable. The slightest puff and elegant tights turn into useless trash. Look in your closet - you'll probably find at least a couple of damaged nylon tights. You can throw them away, or you can make your own original interior decoration - nylon flowers.

Spend the evening creatively - make your favorite flower from scrap material. This is not as difficult as it might seem, especially if you have a detailed master class in front of you. so what? Do you want to try yourself as a florist?

Crafts from nylon tights

Every woman's wardrobe has nylon tights of different colors, densities, and sizes. But they have a common problem - they break very quickly. As soon as the slightest clue appears, the tights are off. You have to throw out the old ones and buy new ones.

But what if we look at the situation differently? It’s very easy to make amazing flowers from old nylon. Instead of spending the whole evening in front of the TV or computer, you can get down to business and turn an old unnecessary thing into a masterpiece.

Gladioli

Flowers made of nylon and wire can also look like gladioli. To do this, you just need to work a little more, since you need to place three or four flowers on one stem, each of which should consist of 6 petals. A special feature of this craft is that the leaves of the “gladiolus” should be exactly the same as the petals, only green.

What materials are needed for making flowers yourself?

One nylon for making decorative flowers, of course, is not enough. You will also need wire, templates, cotton wool, napkins, tape.

of wire : rigid and flexible. One for making stems, the other for petals. Rigid wire will be needed to make the stems. Blanks for petals are made from flexible wire. The maximum length of the roll is eighty centimeters, but, if necessary, you can purchase a smaller roll. The wire is usually coated with plastic, but paper coating may also occur.

If for stems, usually use green and brown wire. It is worth purchasing flexible wire in different colors so that you can make white, red, blue and other products from it.

Materials you will need

To make jewelry from nylon, there are special devices, textiles, as well as ready-made decorative elements. All this can be purchased at craft stores.

Composition of nylon flowers as home interior decoration

Thanks to the rich variety of handicraft products, few people in modern realities make flowers from nylon tights. This method has several disadvantages: insufficient strength and elasticity of the fabric, a small variety of colors and textures, as well as size: the resulting cuts from tights do not always allow you to complete the composition.

Capron

The main material for floral decoration is nylon fabric. This material is created in textile factories specifically for this type of needlework. During its production, the tension of the nylon on the frame and the bending of the products are taken into account, so the nylon fabric is strong and durable, but at the same time it is thin and transparent. Nylon is produced in several versions (plain, multi-colored, openwork, with glitter, etc.).

As a rule, nylon flowers are created from standard size textile fabrics, but when creating large floral decorations it is possible to use giant nylon.

Floral nylon

Note! The special nylon for creativity stretches well. This avoids deformation of the petals when it is pulled onto the frame.

Wire

The basis of the product is a special pliable wire. Thanks to it, the structure is stable and durable, and at the same time, the frame of the product is quite flexible - this allows you to give the desired shape to the entire composition.

What kind of wire is needed for nylon flowers and stems - its thickness, stiffness and texture - depends on what it will be used for. When creating petals, flexible and thin wire is used, and for stems, hard and thick wire is used. A variety of wire surfaces (fluffy, paper-braided or lint-free) will allow you to achieve the desired effect without much difficulty.

Floral wire

Special devices and tools

To work, you need to prepare tools that will help make the creative process easier and more enjoyable:

• Scissors. Sharp manicure scissors are ideal for working with nylon.
• Pliers or wire cutters. Necessary for cutting and bending wire.
• Nylon threads. With their help, the nylon is secured to the frame of the product, and also the parts of the composition are connected to each other.
• Sample. For the base, special sets of plastic cylinders or available materials that have a cylindrical shape (bottles, batteries, tubes, etc.) are suitable.
• Floral tape. It is used when decorating wire, fastening and decorating visible joints and other minor flaws. The elastic and durable tape has an adhesive surface, which eliminates the need for glue when wrapping.

Tools and accessories for work

Flowers made from nylon ribbons: parts and tools

To make work faster, you can use ready-made parts. Special stores sell various leaves, sepals, and stamens. You just need to choose the ones that suit your colors. If you want to make a chrysanthemum, you really need to purchase the entire necessary set of parts for it. All you have to do is make the stems and petals. The same goes for roses, lilies of the valley and many other flowers. Small parts are inexpensive, but

• will reduce the time you spend on making decorative items;
• will make the flowers more attractive and look like real ones.

It is better to immediately buy the necessary tools. To make flowers you will need: scissors, round nose pliers, pliers and glue. It is most convenient to use a glue gun.

Where to begin?

You can take either your unusable tights, socks, or stockings. Or buy nylon in the store. It can be one-color, with glitter, two-color/three-color. To begin with, you can purchase a small piece of 50 cm in size. If you use your own tights, then to give the desired shade, you can tint the nylon with acrylic paint.

For the frame you will definitely need wire. Different flower elements require different types of wire. For example, to prepare a stem, you should take floral wire. Its rigidity is enough for workpieces. It can be covered with a paper layer or plastic. To design the details of the flower, you need to take wire from nylon. It's more flexible.

To cut the wire, of course, you will need sharp scissors. You may find pliers/round nose pliers useful for securing and twisting the wire.

You need templates (any, cylindrical) for the convenience of creating the desired flower shape.

For decorating stems and tying elements together, green or brown tape is perfect.

Beads can be used for the core of a flower; it looks very beautiful and decorative. Prepared stamens are also available for sale. It is best to take threads to match the color of the product.

Stages of work

Try to create a simple flower from nylon:

1. First you need to make the blanks. Twist the wire into a small oval shape (you can twist it using a cylindrical template). This is your future petal.
2. Give the petal the desired shape. Make several of these petals.
3. Pull the nylon over your workpieces and secure with threads. You can paint the petals with acrylic or gouache.
4. For the core, use nylon of a different color, or decorate with beads. You can also buy ready-made plastic stamens in the store.
5. Connect the flower elements using a glue gun.
6. You can leave the flower in the form of a decoration such as a brooch. Or you can attach a stem. You can decorate it with tape or decorative floral paper.

The product is ready. If you wish, you can find a wide variety of lessons and master classes on the topic of creating decorative flowers and decorations. After spending the evening creatively and seeing the result of your work, you will certainly want to continue. You will be amazed at how many amazing and varied things you can create with your own hands.

Popular articles Has your economy lamp burned out?

Sequence of assembling flowers from nylon

Making decorative flowers includes several stages. You need to do the following:

1. Make a wire frame for each petal and leaf. To do this, use the available templates.
2. Give it the required shape.
3. Stretch the fabric over the frame.
4. Secure the petals by wrapping them with thread.
5. Wrap the stem with corrugated paper.

Use your imagination, don’t be afraid to experiment, and you will get beautiful flowers.

Kala

This is probably the easiest version of the craft, which is based on flowers made of nylon and wire. Even a beginner can handle this job.

In addition to traditional materials, you will also need a piece of cotton wool for the stamen. This part is made as follows:

• make a small loop on the wire;
• wrap it with a piece of cotton wool;
• pull the yellow nylon on top and secure it with a thread at the bottom.

There is also an alternative option. To make a stamen in this way, the edge of a piece of yellow nylon is clamped by bending a piece of wire with a length slightly larger than the size of the part that you want to get. Then they wrap the rod tightly around it and secure it at the bottom with a thread.

Then everything is simple:

• one large petal is made from white nylon and wire;
• insert a stamen into it;
• wrap the base with green tape and continue to wrap the stem, adding two or three leaves of a characteristic shape.

Master class on making flowers

Now let's look in more detail at how to make certain types of flowers with your own hands.

Flowers "Cross"

Stage 1. Petals and leaves. We make blanks for each petal and leaf using flexible wire, and stretch nylon over each of them. We wrap the base of each leaf and petal with thread of the appropriate color and cut it off. If the nylon is not colored, the petals need to be painted. Acrylic paints are suitable for this purpose, or stained glass paints can be used. In extreme cases, gouache will do.

Stage 2. Stamens . After the blanks have dried, a flower will be assembled from them. But first the stamens are created.

The easiest way is to use beaded stamens. You need to take a piece of wire and glue beads to one end. More complex - using nylon and paper napkins. We cover the wire with a napkin, then with nylon and also secure it with threads.

How to make basic elements

Nylon flowers for beginners - a tutorial on how to make basic elements with your own hands:

Petals

To make flower petals, you need to wrap a thin wire around a template of the appropriate size. Connect the wire tendrils and screw them together using pliers. Then remove the resulting “ring” from the base and bite off the excess part of the wire with wire cutters. To give the desired shape to the petal, pull out the resulting frame with your hands. Proceed in the same way with the remaining petals. The next stage is tensioning the nylon frames on the resulting frames. “Insert” the petals into the canvas, stretching it. Twist slightly at the base and wrap with nylon thread. Trim off excess fabric and wire.

Stems

Wrap the stems made of thick and rigid wire with green tape. When winding, you need to step back a little from the flower and start wrapping the stem from bottom to top in several layers, and then wind the tape in one layer down to the very end of the wire.

Manufacturing of basic elements

Centers, pistils, stamens and sepals

They are made in different ways depending on the flower, since they are all different from each other. A simple solution is to purchase ready-made parts. Independent production of miniature elements is a long, labor-intensive and painstaking process, and the resulting result will not always be natural and flawless.

Finished parts for flower centers

What are homemade nylon night lights?

If you like to do handicrafts, love to create and create things with your own hands, then, of course, making a night light from nylon will be within your power. A little skill and vivid imagination will help you create a masterpiece in your performance.

What is a nylon night light? This is a fairly simple design, assembled from wire, nylon and LED lamps or garlands. A frame of petals is created from wire, which is covered with pieces of nylon. Subsequently, such petals are combined into flowers, into which LED lamps from garlands are inserted and wrapped with a special tape or thread. Petals and stems are also created from wire. In this way, a night light is created in the form of the intended plant.

Important! Most often, do-it-yourself nylon lamps are made in the form of all kinds of flower arrangements, plants in vases, baskets, and pots. In a word, floral themes are popular.

Such lamps are used in bedrooms, as a night light in children's rooms. They are easy to move and use in any room to create a romantic atmosphere. At the same time, there is no need to burn candles, which subsequently give off a not very pleasant smell, especially after you put them out.

Composition design

For the convenience of home designers, manufacturers produce floral tape that will help you assemble a lamp from a nylon bouquet. With low power of incandescent lamps used, options for closed lamps are possible (Fig. 1). In these designs, the petals form a ball, the electrical wire is routed down through a tube decorated with floral ribbon or colored thread. A flowerpot filled with filler (multi-colored crushed stone) is used as a support.

The luminaires are compact and provide sufficient illumination intensity, which can be adjusted by changing the number of LEDs. Nylon is a flammable material, so caution is required when using these household appliances. It is not recommended to leave them turned on in the absence of users, or to use them without a switch built into the cord at a significant distance from the outlet.

Figure 1. There is no need to place the petals close to the lamp, because nylon is a flammable material.

To give the material the required color, several dyeing technologies are used. The best quality is ensured by the paint used in factories producing women's stockings. The material is dipped for an hour in a mixture of color and washing powder (a tablespoon per 6 liters), then rinsed three times in a soapy solution and cold water.

A budget option of sufficiently high quality (no streaks, the fabric does not stain your hands) is to dye nylon with compounds for wool or cotton. Each packet of such dye is mixed with three tablespoons of salt and two of vinegar essence. The stockings are immersed in liquid heated to 40 degrees for a quarter of an hour, then heated together with it to 75 degrees, and left for half an hour. Rinsing is also a final operation. Despite the natural origin of the dye, heating the fabric to extreme temperatures leads to shrinkage of the material.

Related article: Use of coffee wallpaper in the interior

( 2 ratings, average 4.5 out of 5 )

Flowers in a pot

This craft is very suitable as a gift for a loved one - mother, sister, niece. You can decorate the kitchen interior with such a composition, put it in a dark place - such flowers will never wither and will delight you for a long time.

Flowers and leaves are made using the same method as those described above, but they are mounted in a pot - in the form of real, indoor ones.

To do this, you will need a small container - a flower pot, a little plaster or alabaster, water, polystyrene foam and sisal fibers.

We dilute alabaster with water in the required proportion. We put it in a flowerpot. We insert the finished flower branches into the mixture, giving them the desired appearance, and leave to harden.

After the required time has passed, we cover the alabaster with sisal, leaving no gaps.

All! Give and make your loved ones happy!

Assembling a rose

There should be 4 layers of petals in total. First, 5 of them of size No. 7 are connected together. Then 3 elongated shapes, made according to template No. 6, and 3 of the same, but regular ones.

The last layer should consist of 3 petals. Two of them are regular and 1 is extended. All three are made according to template No. 6.

After that:

• cut off all excess, protruding pieces of wire;
• take the center for the flower from styrofoam;
• using the tip of pliers, enlarge the hole in the base and insert the tip of the flower there;
• cover the center of the rose with red nylon;
• cut off excess;
• wrap the middle with 3 petals of the inner layer;
• bend the next three up;
• wrap them around the middle;
• continue to bend the remaining petals upward.

How to make a flower from wire and varnish

With the help of such delicate flowers you can create the most beautiful jewelry, hairpins, panels, etc. How to make flowers with enamel from wire? Let's talk about this too!

Stock up:

• Copper wire.
• Tape - tape.
• Old nail polish - the thicker the better.
• Sharp scissors.
• Ballpoint pens of various diameters.
• With pliers.
• A container with rice.

First, let's cut the wire into strips of 29 cm. You need 38-45 such pieces. Now take a pen and start making flower frames. How to make flowers from wire? Like this:

Having done everything, carefully straighten and give a picturesque shape to the flower.

But then we begin to cover it with enamel - we take a large amount of varnish onto a brush and apply it to the petal, creating a kind of film. Dry the layer of varnish and apply the next one. Place the flowers in the rice and leave to dry.

You can complicate the task and make stamens. So, how to make a flower - twist the middle out of beads and wire, and then also use a pen to form petals, placing the stamens in the middle.

We combine the dried flowers with the help of stems into the final product - a tiara, bracelet, hairpin.