How to make a hydrogen generator at home

The rise in energy prices stimulates the search for more efficient and cheaper types of fuel, including at the household level. Most of all, craftsmen and enthusiasts are attracted by hydrogen, whose calorific value is three times higher than that of methane (38.8 kW versus 13.8 per 1 kg of substance). The method of extraction at home seems to be known - splitting water by electrolysis. In reality the problem is much more complex. Our article has 2 goals:

• analyze the question of how to make a hydrogen generator at minimal cost;
• Consider the possibility of using a hydrogen generator for heating a private home, refueling a car, and as a welding machine.

Brief theoretical part

Hydrogen, also known as hydrogen, the first element of the periodic table, is the lightest gaseous substance with high chemical activity. During oxidation (that is, combustion), it releases a huge amount of heat, forming ordinary water. Let us characterize the properties of the element, formatting them in the form of theses:

1. The combustion of hydrogen is an environmentally friendly process; no harmful substances are released.

2. Due to chemical activity, the gas does not occur in free form on Earth. But its reserves in water are inexhaustible.
3. The element is extracted in industrial production by a chemical method, for example, in the process of gasification (pyrolysis) of coal. Often a by-product.
4. Another way to produce hydrogen gas is by electrolysis of water in the presence of catalysts - platinum and other expensive alloys.
5. A simple mixture of hydrogen + oxygen gases explodes from the slightest spark, instantly releasing a large amount of energy.

For reference. Scientists who first separated the water molecule into hydrogen and oxygen called the mixture an explosive gas due to its tendency to explode. Subsequently, it received the name Brown's gas (after the name of the inventor) and began to be designated by the hypothetical formula NHO.

Previously, airship cylinders were filled with hydrogen, which often exploded.
From the above, the following conclusion suggests itself: 2 hydrogen atoms easily combine with 1 oxygen atom, but part very reluctantly. The chemical oxidation reaction proceeds with the direct release of thermal energy in accordance with the formula:

2H2 + O2 → 2H2O + Q (energy)

Here lies an important point that will be useful to us in further debriefing: hydrogen reacts spontaneously from combustion, and heat is released directly. To split a water molecule, energy will have to be expended:

2H2O → 2H2 + O2 – Q

This is the formula for an electrolytic reaction that characterizes the process of splitting water by supplying electricity. How to implement this in practice and make a hydrogen generator with your own hands, we will consider further.

Advantages and disadvantages

Hydrogen technology, in comparison with other types of thermal joining of metals, wins in many respects:

• efficiency;
• security;
• environmental friendliness

Compact devices are convenient for joining many materials:

• carbon, low-alloy and steels;
• glass;
• cast iron;
• some non-ferrous alloys;
• glass;
• ceramics;
• composite materials.

The welding process does not involve frequent charging of equipment, which saves a lot of time. It takes no more than 5 minutes to generate gas. Despite their small dimensions, the devices have high operating power. Unlike acetylene welding, hydrogen welding does not pollute the atmosphere with combustion products or nitrogen vapor. The equipment is fireproof; the design has minimal risks of fire and explosions. During operation, the seams do not oxidize.

Creation of a prototype

So that you understand what you are dealing with, first we suggest assembling a simple generator for producing hydrogen at minimal cost. The design of a homemade installation is shown in the diagram.

What does a primitive electrolyzer consist of:

• reactor - a glass or plastic container with thick walls;
• metal electrodes immersed in a reactor with water and connected to a power source;
• the second tank plays the role of a water seal;
• tubes for removing HHO gas.

Important point. The electrolytic hydrogen plant operates on direct current only. Therefore, use an AC adapter, car charger or battery as a power source. An AC generator will not work.

The operating principle of the electrolyzer is as follows:

1. Voltage is applied to two electrodes immersed in water, preferably from a regulated source. To improve the reaction, a little alkali or acid is added to the container (ordinary salt at home).

2. As a result of the electrolysis reaction, hydrogen will be released from the cathode connected to the negative terminal, and oxygen will be released near the anode.
3. Mixing, both gases enter the water seal through the tube, which performs 2 functions: separating water vapor and preventing a flash in the reactor.
4. From the second container, the detonating gas NHO is supplied to the burner, where it is burned to form water.

To make the generator design shown in the diagram with your own hands, you will need 2 glass bottles with wide necks and caps, a medical dropper and 2 dozen self-tapping screws. The full set of materials is shown in the photo.

Special tools will require a glue gun to seal plastic lids. The manufacturing procedure is simple:

1. Twist flat wooden sticks with self-tapping screws, placing their ends in different directions. Solder the screw heads together and connect the wires - you will get future electrodes.
2. Make a hole in the lid, insert the cut dropper body and wires into it, then seal it on both sides with a glue gun.
3. Place the electrodes in the bottle and screw on the cap.
4. Drill 2 holes in the second lid, insert dropper tubes and screw onto a bottle filled with plain water.

To start the hydrogen generator, pour salted water into the reactor and turn on the power source. The beginning of the reaction will be marked by the appearance of gas bubbles in both containers. Adjust the voltage to the optimum value and ignite the Brown gas coming out of the dropper needle.

Second important point. It is impossible to apply too high a voltage - the electrolyte, heated to 65 ° C or more, will begin to evaporate rapidly. Due to the large amount of water vapor, it will not be possible to light the burner. For details on assembling and launching an improvised hydrogen generator, watch the video:

Some good advice

Next, let's talk about other components of the hydrogen burner - the filter for the washing machine and the valve. Both are for protection. The valve will not allow ignited hydrogen to penetrate back into the structure and explode the gas accumulated under the lid of the electrolyzer (even if there is only a little of it there). If we do not install the valve, the container will be damaged and the alkali will leak out.

A filter will be required to make a water seal, which will act as a barrier preventing an explosion. Craftsmen who are familiar firsthand with the design of a homemade hydrogen burner call this valve a “bulbulator.” Indeed, it essentially only creates air bubbles in the water. For the burner itself we use the same transparent hose. That's it, the hydrogen burner is ready!

All that remains is to connect it to the input of the “warm floor” system, seal the connection and begin direct operation.

About the Meyer hydrogen cell

If you have made and tested the design described above, then you probably noticed from the burning of the flame at the end of the needle that the performance of the installation is extremely low. To get more detonating gas, you need to make a more serious device, called the Stanley Meyer cell in honor of the inventor.

The principle of operation of the cell is also based on electrolysis, only the anode and cathode are made in the form of tubes inserted into one another. Voltage is supplied from the pulse generator through two resonant coils, which reduces current consumption and increases the productivity of the hydrogen generator. The electronic circuit of the device is shown in the figure:

Note. The operation of the circuit is described in detail on the resource https://www.meanders.ru/meiers8.shtml.

To make a Meyer cell you will need:

• a cylindrical body made of plastic or plexiglass; craftsmen often use a water filter with a lid and pipes;
• stainless steel tubes with a diameter of 15 and 20 mm, a length of 97 mm;
• wires, insulators.

Stainless steel tubes are attached to a dielectric base, and wires connected to the generator are soldered to them. The cell consists of 9 or 11 tubes placed in a plastic or plexiglass case, as shown in the photo.

A ready-made plastic housing from a conventional water filter can be adapted for the Meyer cell

The elements are connected according to a scheme well known on the Internet, which includes an electronic unit, a Meyer cell and a water seal (technical name - bubbler). For safety reasons, the system is equipped with critical pressure and water level sensors. According to reviews from home craftsmen, such a hydrogen installation consumes a current of about 1 ampere at a voltage of 12 V and has sufficient performance, although exact figures are not available.

Schematic diagram of switching on the electrolyzer

We make repairs

When you have carried out an inspection, found out the cause and diagnosed the problems, you can begin to repair the gas stove yourself. It is carried out similarly for all models. The famous Italian brand Ariston or the Belarusian stove Hephaestus, which is in great demand among Russians, there is no difference, the ignition systems are almost identical except for purely individual nuances.

1. We ignite the faulty burner using a third-party source of open flame, matches or a special lighter - the flame should be even and distributed over the entire circumference of the divider. A yellow flame means the concentration of gas and air is incorrect: the nozzle needs to be cleaned or replaced. It is possible that the holes in the divider are clogged or moisture has entered there. It is necessary to do preventive maintenance, blow out all the holes, remove the burner body and inspect it.
2. All electrodes and switches are connected in parallel. Each electrode is powered from a single ignition unit, but they are turned on from different buttons. To make sure that only this button does not work, and the control unit is normal, you need to turn on the next burner. If the gas ignites, repair the button, and everything else in the system works properly.
3. If the ignition device is constantly cracking, then it is necessary to check the contacts - they could be stuck due to grease or carbon deposits may have formed as a result of oxidation. Before repairing, do not forget to disconnect the stove from the mains, then carefully dismantle it, clean the contacts or dry them with a hair dryer. Following safety instructions will protect you from injury.

Most of the breakdowns that led to the failure can be fixed independently - they are not dangerous for the user, but it must be remembered that gas stoves are potentially dangerous products, so even preventative work must be carried out carefully. Sometimes a breakdown of the ignition button leads to the fact that repair will not help - a complete replacement is necessary

In this case, it is better to go to special stores and purchase a similar option.

Sometimes a breakdown of the ignition button leads to the fact that repair will not help - a complete replacement is necessary. In this case, it is better to go to special stores and purchase a similar option.

Plate reactor

A high-performance hydrogen generator capable of ensuring the operation of a gas burner is made of stainless steel plates measuring 15 x 10 cm, quantity - from 30 to 70 pieces. Holes are drilled in them for the tightening pins, and a terminal for connecting the wire is cut out in the corner.

In addition to sheet stainless steel grade 316, you will need to buy:

• rubber 4 mm thick, resistant to alkali;
• end plates made of plexiglass or PCB;
• tie rods M10—14;
• check valve for gas welding machine;
• water filter for water seal;
• connecting pipes made of corrugated stainless steel;
• potassium hydroxide in powder form.

The plates must be assembled into a single block, isolated from each other with rubber gaskets with a cut out middle, as shown in the drawing. Tie the resulting reactor tightly with pins and connect it to the pipes with the electrolyte. The latter comes from a separate container equipped with a lid and shut-off valves.

Note. We tell you how to make a flow-through (dry) type electrolyzer. It is easier to manufacture a reactor with submersible plates - there is no need to install rubber gaskets, and the assembled unit is lowered into a sealed container with electrolyte.

Scheme of a wet-type hydrogen installation.
The subsequent assembly of the generator producing hydrogen is carried out according to the same scheme, but with differences:

1. A reservoir for preparing electrolyte is attached to the body of the device. The latter is a 7-15% solution of potassium hydroxide in water.
2. Instead of water, a so-called deoxidizing agent is poured into the “bubbler” - acetone or an inorganic solvent.
3. A check valve must be installed in front of the burner, otherwise when the hydrogen burner is turned off smoothly, the backlash will rupture the hoses and the bubbler.

To power the reactor, the easiest way is to use a welding inverter; there is no need to assemble electronic circuits. How a homemade Brown gas generator works is explained by a home craftsman in his video:

Safety precautions when welding with hydrogen

Industrial devices for hydrogen and atomic-hydrogen welding are equipped with an automatic shutdown system. When the pressure of the gas mixture increases, the current supply stops automatically, without the participation of the welder. As with other hot work, safety precautions must be observed when welding with an electrolyzer.

Basic Rules:

1. The gas burner is located away from flammable and flammable substances. During operation, the nozzle is held in the opposite direction from the power source. Use barrier screens.
2. The enclosed space must be ventilated periodically.
3. Flame negatively affects the retina and eyeball. When hydrogen welding, it is recommended to use dark glasses.
4. During transportation, a protective cap is put on gas cylinders, metal tanks are installed in lattice stands so that the cylinders do not come into contact with each other and do not fall during transport.
5. Oxygen is not stored in the welding area; during moments of rest, the welding equipment is turned off.

It is safe to work if you follow the operating rules. High-quality compounds are obtained without harm to yourself and the environment.

Is it profitable to produce hydrogen at home?

The answer to this question depends on the scope of application of the oxygen-hydrogen mixture. All drawings and diagrams published by various Internet resources are designed for the release of HHO gas for the following purposes:

• use hydrogen as fuel for cars;
• smokeless combustion of hydrogen in heating boilers and furnaces;
• used for gas welding work.

The main problem that negates all the advantages of hydrogen fuel: the cost of electricity to release the pure substance exceeds the amount of energy obtained from its combustion. Whatever adherents of utopian theories may claim, the maximum efficiency of the electrolyzer reaches 50%. This means that for 1 kW of heat received, 2 kW of electricity is consumed. The benefit is zero, even negative.

Let's remember what we wrote in the first section. Hydrogen is a very active element and reacts with oxygen on its own, releasing a lot of heat. When trying to split a stable water molecule, we cannot apply energy directly to the atoms. The splitting is carried out using electricity, half of which is dissipated to heat the electrodes, water, transformer windings, and so on.

Important background information. The specific heat of combustion of hydrogen is three times higher than that of methane, but by mass. If we compare them by volume, then when burning 1 m³ of hydrogen, only 3.6 kW of thermal energy will be released versus 11 kW for methane. After all, hydrogen is the lightest chemical element.

Now let's consider detonating gas obtained by electrolysis in a homemade hydrogen generator as fuel for the above needs:

1. The final installation price, low productivity and efficiency make it extremely unprofitable to burn hydrogen for heating a private home. Rather than “winding” the meter with an electrolyzer, it is easier to install any of the electric boilers - heating element, induction or electrode.
2. To replace 1 liter of gasoline for a car, you will need 4766 liters of pure hydrogen or 7150 liters of detonating gas, a third of which is oxygen. The most lying inventor on the Internet has not yet made an electrolyzer capable of providing such productivity.
   Read also:  How to make a children's kitchen with your own hands from boxes, old furniture or wood
3. A gas welding machine that burns hydrogen is more compact and lighter than cylinders with acetylene, propane and oxygen. Plus, the flame temperature of up to 3000 °C allows you to work with any metals; the cost of obtaining fuel does not play a special role here.

For reference. To burn hydrogen in a heating boiler, you will have to thoroughly redesign the design, since a hydrogen burner can melt any steel.

Selected points of use

First of all, I would like to note that the traditional method of burning natural gas or propane is not suitable in our case, since the combustion temperature of HHO is more than three times higher than that of hydrocarbons. As you yourself understand, structural steel will not withstand this temperature for long. Stanley Meyer himself recommended using a burner of an unusual design, the diagram of which is given below.

Scheme of a hydrogen burner designed by S. Meyer

The whole trick of this device is that HHO (indicated by the number 72 in the diagram) passes into the combustion chamber through valve 35. The burning hydrogen mixture rises through channel 63 and simultaneously carries out the ejection process, entraining outside air through adjustable openings 13 and 70. Under the hood 40, a certain amount of combustion products (water vapor) is retained, which enters the combustion column through channel 45 and mixes with the burning gas. This allows you to reduce the combustion temperature several times.

The second point that I would like to draw your attention to is the liquid that should be poured into the installation. It is best to use prepared water that does not contain heavy metal salts

The ideal option is distillate, which can be purchased at any auto store or pharmacy. For successful operation of the electrolyzer, potassium hydroxide KOH is added to the water, at the rate of approximately one tablespoon of powder per bucket of water.

And the third thing we place special emphasis on is safety. Remember that it was not by chance that the mixture of hydrogen and oxygen was called explosive. HHO is a hazardous chemical that can cause an explosion if not handled properly. Follow safety rules and be especially careful when experimenting with hydrogen. Only in this case, the “brick” that our Universe consists of will bring warmth and comfort to your home.

We hope you found this article a source of inspiration and will roll up your sleeves and start making a hydrogen fuel cell. Of course, all our calculations are not the ultimate truth, however, they can be used to create a working model of a hydrogen generator. If you want to completely switch to this type of heating, then the issue will have to be studied in more detail. Perhaps your installation will become the cornerstone, thanks to which the redistribution of energy markets will end, and cheap and environmentally friendly heat will enter every home.

Water burner - miniature autogen

The principle of producing hydrogen by electrolysis of an aqueous alkali solution is used. Thanks to the small external dimensions of the electrolyser, there is a place for it on a small workbench, and the use of a standard rectifier for recharging batteries as a power supply unit facilitates the manufacture of the installation and makes working with it safe.

The relatively small, but quite sufficient performance of the device for the needs of the modeller, made it possible to extremely simplify the design of the water seal and guarantee fire and explosion safety.

Final stage

At the end of the work, the master will be able to obtain a high-quality and reliable hydrogen generator for the heating system of a private home. Next, only the final touches remain:

• install the finished fuel cell into the main body of the device;
• connect the electrodes to the terminal block of the device cover;
• the fitting installed at the hydrogen outlet should be connected to the hydrogen manifold;
• The cover is placed on top of the device body and secured through a seal.

The hydrogen generator is now completely ready for operation. The owner of a private house can safely connect water and additional modules for comfortable heating of a private house.