How to make slime or slime from sodium tetraborate: 20 recipes

Sodium tetraborate (solution) used in making slimes is the sodium salt of boric acid, which is a medicine. You can buy it without a prescription at a pharmacy for 15-25 rubles. bottle. The same substance, but in powder form, is used to feed plants and kill insect pests. It is called borax or borax, sold in hardware stores for 100 rubles. for 50 g.

Sodium tetraborate is an excellent stabilizer; it produces the highest quality slimes. You should not abuse it so that the toy does not come out too tight. And you need to understand that this substance is slightly toxic, although it is also used in the food industry.

Fluffy without shaving foam

This slime should turn out fluffy and light, like a classic fluffy. It also crunches loudly and stretches far. It contains shaving gel, which can also thicken the composition, so the main activator should be added carefully, in small portions.

Recipe

3 tbsp. l. PVA glue,
1 tsp. shaving gel,
0.5 tsp. fat cream,
0.5 tsp. shampoo,
1 pea of toothpaste,
a few drops of sodium tetraborate,
liquid dye, decor - optional.

Cooking method

Place glue in a bowl and add shaving gel.
Add a little cream and the same amount of shampoo.
Read also: DIY tube for electrodes made from sewer pipes
Add toothpaste to the mixture and make it homogeneous using a spoon.
Drop sodium tetraborate into the mixture and stir well until compacted.
Mash the slime with your hands until ready.
Apply paint to the surface of the toy and stir it.

Watch this video on how to make fluffy slime without shaving foam:

How to increase slime without water

You can enlarge a small slime without water by adding transparent glue or PVA if the toy is plastic enough:

both ingredients are mixed in a bowl until smooth;
they can be supplemented with body lotion and shampoo;
mix the composition well again;
then you need to add the activator and knead the mass until ready.

Instead of any of the thickeners, starch is suitable; you will need a small amount of it. Then the slime will remain stretchy, but will become matte and keep its shape.

Mountain slime

This slime is made up of three different colored halves. Its preparation takes quite a lot of time, but the result will be a plastic toy with beautiful tints of shades. Everything will work out if the mass settles tightly in the container.

Ingredients

4 tbsp. l. PVA glue,
3 doses of liquid soap,
1 tsp. water,
0.4 tsp. hand or body cream
a few drops of sodium tetraborate.

For the second half of the slime take:

30 ml transparent glue,
0.5 tsp. water,
sodium tetraborate,
2 different dyes.

How to make slime

PVA glue is placed in a bowl and soap is added.
Water is poured there, then cream.
After stirring, add sodium tetraborate and again work with a spoon, and then with your hands.
Place the finished half of the slime in a container with a lid and set aside.
Office glue is poured into another bowl and water is added to it.
Mix immediately, pour in the thickener, work with a spoon until the mass thickens, and then with your hands.
The resulting transparent base is divided into 2 parts and painted in different colors.
Both halves are placed in an empty container next to each other.
White slime is placed on top, the container is closed and left alone for 1 day.

Watch this video on how to make mountain slime:

Preparing for work

Magnetic slimes are sold in children's stores, but children will find it more interesting to make them themselves. The recipe is simple and the ingredients are affordable. First you need to prepare the base for the toffee. Required:

small capacity;
stirring stick;
PVA glue;
borax.

The stick can be made of wood or plastic. Iron or aluminum may react with the components of the mixture, and the slime will not work. Similar requirements for capacity. Glass or plastic will do. PVA glue should have a thick consistency. If it is liquid like milk, the slime will not become jelly-like.

Another essential component is sodium tetraborate (another name is “borax”). This drug is freely available in any pharmacy. It is recommended to purchase borax in glycerin so that the finished slime does not stick to your hands during play.

From office glue

This slime immediately turns out to be a thick white color. And when stretched, it becomes transparent, and air bubbles are visible inside. If you want to get a completely “glass” toy, after making it, you should put it in a closed container for 2-3 days. It will become completely transparent.

Proven slime recipe

2 tubes of transparent glue,
0.5 tsp. water,
4 pumps of clear liquid soap,
a few drops of sodium tetraborate,
decorative elements.

Cooking method

The glue is placed in a container and water is poured into it.
Soap is also added there.
Mix the transparent mass well.
Pour in sodium tetraborate and shake the contents of the container again.
The thickened and sticky mass is crushed by hand.
At the end, add beads and mix them into the slime.

Watch this video on how to make transparent slime:

How to increase purchased slime

To increase your hard store-bought slime, you will need:

divide it into pieces and put them in a bowl;
pour warm water there so that its quantity is approximately equal to the volume of store-bought slime;
put this dish in the microwave for 30 seconds;
remove the heated mass, mix it well;
add activator;
knead again with a spoon, and at the end of the process knead with your hands.

If a store-bought toy is too liquid, add a little starch, shampoo, and cream to it. After mixing the components, you need to use any of the activators. Next, shaking the mass with a spatula helps it stabilize. When it has thickened, just mash it with your hands.

With artificial snow

This method makes it possible to make snow or cloud slime. When stretched, cobwebs will be visible in its thickness. The toy should stick a little to your hands and have a delicate texture.

What to make from

a bag of artificial snow,
2 tsp. water,
65 ml stationery glue,
3 doses of shower gel,
a little gold dye
3 different paints and the same shades of glitter,
2-4 drops of sodium tetraborate.

How to cook

Combine “snow” with water and stir.
Pour glue into another bowl and add shower gel to it, shake too.
Add paint.
Add a little thickener.
Work with the mixture with a spoon until rolling, then with your hands.
While the mixture sticks a little to the skin, stir in artificial snow.
Divide into several segments, add bright dye and glitter to each.
Mix different colored pieces into one whole.

Watch this video on how to make snow slime:

With Teymurov spray

Teymurov's foot spray is an excellent thickener for slimes. It acts softly and quickly. The recipe itself is almost classic. The list of ingredients looks like this:

thick stationery glue - 50 ml.;
water - 75 ml;
Teymurov spray.

Mix water and glue in a container and mix gently. Now add the activator. You will need approximately 30-35 sprays of spray. When the slime begins to move away from the walls of the vessel and does not stick to your hands, you can leave it alone for 1-2 hours. There is no need to cover with a lid; excess moisture should evaporate. Slime made according to this recipe turns out transparent and beautiful.

From glue and borax

Slime made using this method is elastic. When it hits a hard surface, it springs like a ball. The mass has less stretch than the original slime, but it is very pleasant to the touch and has a loud “click” sound.

Ingredients

5 tbsp. l. PVA glue,
60-70 ml of borax solution,
nail polish.

Cooking method

Mix borax with water in a ratio of 1:4.
Add glue to the solution.
After a few seconds it will thicken, and then you need to collect it from the liquid with a spatula or stick.
Knead the mixture with your hands for a short time.
Paint with varnish, distributing it in the slime with your fingers.

We recommend reading about how to make slime without sodium tetraborate. From the article you will learn about proven recipes for slimes without tetraborate with the addition of shampoo, glue, lens fluid, freshener, soda and air plasticine. And here is more information about what slime is and what it is needed for.

Rules for use and storage

Such slimes should not be subjected to a number of factors. For example, dust, dirt, increased dryness and humidity. Besides:

Use an airtight container. This is where the magnetic slime should be stored. Place it in the refrigerator overnight.
Remove small lint with a needle or tweezers. Then be sure to wipe the toy with a cotton pad soaked in an alcohol solution.
Play with slime often. For example, at least once every three to four days. Otherwise, it will begin to become moldy, and therefore will have to be thrown away ahead of schedule.

Now you can keep your magnetic slime in good condition for as long as possible.

6: Made from clear borax glue

The toy is similar to the one obtained using the previous method, but it is softer and stretches better. And the decorating element turns the slime into iridescent. You can also make a ball from this slime that will fly off the table surface when you hit it.

What you need to make slime

30 ml stationery glue (transparent),
30 ml colorless liquid soap,
10 ml borax,
40 ml water,
3-5 g of powder highlighter.

How to make at home

Send the glue into a container, and pour soap into it.
Mix the slime ingredients.
In another container, make a solution of borax and water, and pour a mixture of glue and soap into it.
Immediately begin to collect the thickening mass with a spatula.
Knead it a little with your fingers and, holding it in your hands, mix the highlighter into it.

Watch this video on how to make slime from clear glue with Borax:

How to choose ingredients

The basis for the toy will be metal chips - it provides a specific reaction of the slime to the magnet. There is practically no place to buy ready-made ones, so use one of our tips:

You can make metal sand with your own hands. To do this, simply rub a file on any unnecessary item made of this material. The method has many disadvantages: from the laboriousness of the process to significant time consumption, and the likelihood of chips getting into the eyes. Therefore, it is best to carry out work with protective glasses and gloves.
Use iron oxide powder. This is usually available to production workers.
Buy powder developer. It is used to refill printers.

To make magnetic slime glow in the dark, you need to add phosphorus paint to the composition. Prepare a stick that you will use to stir the ingredients. It can only be plastic or wood.

Expert opinion

Irina Nikolayevna

Specialist in licks and slimes.

You should not stir products with iron or aluminum sticks, which may enter into undesirable reactions with the components. For example, attract them or magnetize them.

With sparkling water

This slime should come out large, fluffy, shiny and transparent when stretched. At the same time, it does not leave marks on the skin or surfaces. Another feature of it is loud sounds when squeezed with fingers.

Ingredients

30 ml PVA glue,
the same amount of transparent glue,
30 ml of sparkling water, preferably having a bright color,
7 tbsp. l. thick shampoo,
a little dye,
1 tsp. baby cream,
a pinch of soda,
0.5 tsp. boric acid solution.

How to cook it yourself

Squeeze PVA into a cup and add transparent glue.
Pour soda into the liquid, stir so that there are no clots.
Shampoo is added.
After stirring, tint the mass.
Pour cream into it and work in the liquid with a spoon.
Add soda and stir.
Thickener is added.
Mix until creamy with a spoon, then knead the slime in your hands.

Watch this video on how to make crispy slime:

Algorithm for creating slime

Pour seven tablespoons of sour milk into a container.
Add one spoon of acetic acid and mix everything until any lumps and clots that may appear during the mixing process are removed.
After such a reaction, a precipitate forms; it is necessary to use a sieve and strain the mixture. The entire liquid part of the mixture must leave the reaction zone.
To the resulting sediment you need to add a quarter spoon of soda. A reaction will begin with the release of carbon dioxide.

Now the slime is ready. When carrying out this reaction, you must be extremely careful, since the experiment uses acid and alkali. Safety precautions must be observed when conducting such experiments. Milk contains casein, which, when interacting with acid, creates this mass.

Good luck in making and storing slime! Have fun and have amazing emotions!

With corn starch

This recipe makes a thick, matte slime. And yet it is soft, easily stretched, and does not retain its shape for long.

Ingredients

4 tbsp. l. PVA glue,
any dye,
2 tsp. with a heap of cornstarch,
2 tbsp. l. shaving foam,
3-5 drops of sodium tetraborate.

Cooking method

The slime is made as follows:

You need to mix glue and paint.
Add starch and try to dissolve it in the mixture using a spoon.
Add shaving foam and stir.
Thicken the mass by adding sodium tetraborate.
Knead it until done.

Watch this video on how to make slime from cornstarch:

Salt injections

Preparation of the solution

If the toy becomes smaller in size, you need to urgently save it. Let's look at another way that tells you how to increase slime. It is suitable for the rehabilitation of both purchased and homemade slime. You will need dry wipes, salt, a syringe with a needle, and water.

To make the slime as big as possible, mix 100 ml of warm water and three pinches of salt in a small container. Place hand chewing gum in the resulting solution for 5 minutes. If the slime has become very sticky, add 1 g of salt to it and knead it thoroughly.

Injection

Now mix 20 ml of water with two pinches of salt and pour the liquid into the syringe. Do not use boiling water, the water must be warm, otherwise the toy will be damaged. Now stick the needle into the slime and pump it with liquid. Repeat the procedure three times after an interval of 2-3 hours.

Do not leave children unattended while using this method. They may inadvertently injure themselves from the syringe needle. If everything is fine with the slime and it has become larger, you did everything right.

With toothpaste

This slime should turn out fluffy and voluminous, despite the small amount of glue. It gets your hands a little dirty, but it stretches well, crunches and doesn’t lose its fluffiness when squeezed.

Components

2 tbsp. l. white toothpaste,
the same amount of shampoo
3 tbsp. l. PVA glue,
0.5 tsp. sodium tetraborate,
2 different dyes.

Cook at home

Place toothpaste and shampoo in one bowl.
Whisk for 3 minutes.
Add glue to the mixture and stir it.
Pour in sodium tetraborate.
Help him stabilize the mass using a stirrer.
Divide the slime into two parts and color both.
Mix the multi-colored segments into one.

Watch this video on how to make slimes from toothpaste:

Rules for caring for purchased slime at home, depending on the type

To ensure that purchased slime does not lose its volume and elasticity, it must be properly cared for. Care instructions vary depending on the type of slime.

Ninja

This type of slime has a transparent plastic packaging through which its contents are visible. The packaging also has a black tube attached to it for inflating the slime.

The problem with ninja slimes is that they quickly lose their elasticity: to fix this, every few days add 2-3 drops of toothpaste to the slime and stir with a spoon until smooth. After this procedure, the toy will stretch much better than before.
You need to regularly clean the slime from dirt.
The toy must be stored in an airtight, tightly closed container.

Before purchasing a Hinja slime, make sure you are buying the original toy and not a cheap copy that will tear and crumble.

Batter

The name of the toy is translated from English as butter. The slime received this name due to its delicate texture, the consistency of which is reminiscent of melted butter. A distinctive feature of this type of slime is that it spreads on any smooth surface.

To prevent butter slime from drying out, store it in any tightly closed container.
If the slime begins to tear and stretch poorly, add a couple of drops of skin oil to it.
Do not use tetraborate or glue to increase volume or remove stickiness - these ingredients will give the butter slime strong elasticity and it will not smudge.

Transparent slime

Transparent slimes look like colorless chewing gum or liquid glass . Compared to classic slimes, they are softer and more viscous, but do not hold their shape well.

If you play with clear slime for too long, bubbles will start to appear inside. To avoid this, play with the slime for no more than 40 minutes, and then immediately put it in a special container.
If you want the slime to become more transparent, put it in a closed container and do not touch it for 2-3 days.
If your slime is too slippery and does not stick to the surface, add a little glue or flour and then mix thoroughly.

From a film mask, without glue

This is one of the easiest ways to make crunchy slime. It doesn't turn out to be very big, but it stretches without tears and inflates like chewing gum.

Simple recipe

3 tbsp. l. film masks,
1 tsp. hand cream,
4 tbsp. l. shaving foam,
a few drops of sodium tetraborate.

Preparation method

Mix the film mask and hand cream.
Make the mass more voluminous using shaving foam.
Mix the components again.
Thicken the mass with sodium tetraborate.
Mix with a spoon and fingers.

Watch this video on how to make slime from shampoo and toothpaste:

Slime made from sour milk

Such an unusual toy will not require any costs from the manufacturer, because milk is found in everyone’s home, and even more so, milk is not stored for so long, so it is guaranteed to go sour at some point. If this happens, then there is no need to rush to pour the milk into the toilet, because a sour milk product can make a wonderful toy. This recipe requires only a few ingredients:

Milk that has gone sour.
Acetic acid.
A sieve or some kind of filter.
Soda.

Made from two types of glue

This toy is essentially made of two components: glue and thickener. That's why it always works out. You can make a lot of slimes using this recipe using different decor.

What do you need for slime?

65 ml PVA glue,
30 ml stationery glue,
aqueous solution of sodium tetraborate,
dye, glitter.

How to cook it yourself

You need to mix both types of glue.
Add sodium tetraborate a little at a time several times, constantly stirring the mixture with a spoon.
When it looks like semolina porridge with lumps, you need to take it in your hands and actively knead it.
Color the almost finished slime and add decoration by kneading the toy.

Watch this video on how to make slime from glue and sodium tetraborate:

How to make small slime bigger

In addition to the methods already listed, you can enlarge a small slime by adding:

liquid soap,
shampoo,
shower gel.

You need to take a small amount of one of these components and mix it with the slime. Then use the next portion and repeat this several times. The slime should be placed in an open container and allowed to stand for 20-30 minutes. As time passes, you will see how much it has increased.

An important condition for this method is that the soap additive must have a thick consistency. But don't expect the toy to become much larger than before. If you add too much soap or shampoo, it will become sticky or even disintegrate.

With glycerin

Even a novice slimer can make a slime using this recipe if the glue is chosen correctly. The toy will be an original type, it can be decorated with sparkles or any pigment.

Easy recipe

2 tsp. water,
1 tsp. shampoo,
0.5 tsp. cream or 1 tsp. glycerin,
5 tsp. PVA glue,
a little sodium tetraborate or Naphthyzin with soda.

Cooking method

Pour water and shampoo into the bowl and mix with a spoon.
Add cream, mix.
Pour glue into the foamy liquid and make it homogeneous using a spoon.
Add sodium tetraborate in portions, stir until the mixture coagulates.
Make the slime cooler by squishing it in your hands.

Watch this video on how to make slime with glycerin:

Kinetic sand to increase slime

It is recommended to use it to increase the volume of the toy only if the base of the slime was kinetic sand. If there was no such ingredient in the composition, it is better to look for another way to increase the volume of the slime.

You can buy kinetic sand in any department of children's toys or in the office. Unlike ordinary sand, decorative material for crafts is impregnated with a bonding liquid, which allows it to easily connect with the structure of the slime.

Do not use the entire package at once. Add kinetic sand to the expanding slime gradually. Mash the slime and pour 1 tablespoon, evenly distributing the bulk material over its surface.

Fold into an envelope and mix thoroughly. Repeat the procedure several times until you get the desired result.

Neon with plasticine

This toy is especially fun to make and play with in a dimly lit room. Thanks to the neon components, it glows. At the same time, there is nothing complicated in the recipe; even a beginner slimer can handle it.

What can it be made from?

50 ml neon glue,
1-2 g neon sparkles,
a small piece of plasticine with foam balls,
a few drops of borax solution (125 ml of water per 10 g of powder).

Cooking method

The glue is poured into the dishes.
Add glitter.
Place plasticine and stir everything.
Stabilizer is added.
Stir with a spoon and hands until done.

Watch this video on how to make neon slime:

Interesting games

Use magnetic slime for its intended purpose. For example, you can try this game: place a small magnet, preferably round, on the table. Next to it - no further than two cm - place the ready-made slime. It will slowly and smoothly begin to attract: watch this process.

You can also try:

Place the slime on the table. Without letting go of the device, start moving it over the slime to the right and left. Under the influence of such manipulations, the slime will take on a special shape.
Roll the toy into a small ball. Attach eyes made of beads or small buttons in its central part. Thanks to this, the magnetic slime will literally come to life before your eyes.
Place the slime on the table and place a magnet in the center. Now you can observe how the mass will gradually be attracted to the magnet until it is completely absorbed.

All actions to create magnetic slimes must be carried out under the supervision of parents. This will prove to be the safest option.

With hair foam

This recipe allows you to save on some components, because shaving cream is cheaper than foam. Nevertheless, the result is a lush fluffy slime, thanks to the hair product and whipping the mass during the manufacturing process.

Fluffy Sloughm Recipe

2 tsp. shower gel,
0.5 tsp. shaving cream,
2 tsp. with a foam top for the care of weakened hair,
4 tsp. transparent glue (it can be tinted with any pigment),
glitter,
borax solution, which is made from 125 ml of water and 10 g of the main component.

How to do

Place shower gel and shaving cream in one bowl and mix.
Add hair foam.
After mixing the previous components, pour in the glue and shake the liquid with a spoon until fluffy.
Add glitter.
Pour in the borax solution and stir until it curls.
Then knead the mass with your hands.

Watch this video on how to make fluffy slime without glue and without shaving foam:

History of creation

Handgam was first introduced in America back in 1976. The company that created this toy invested a huge amount of money in promoting the product, but in those years such an invention did not gain popularity. But nowadays everyone knows about such a wonderful toy, more and more people are trying to make it themselves, because in the process of creation you can not only get a sea of new impressions, positive emotions and emotions, but also new knowledge in the field of chemistry. And when using slime, you can gain knowledge in the field of physics and find out what feature is found in a non-Newtonian liquid.

With starch and body lotion

This recipe produces fluffy, textured fluffy slime. It is also elastic and soft, with a noticeable shine thanks to the body lotion.

What to make from

5 tbsp. l. PVA glue,
2 tsp. cold water,
0.5 tsp. body lotion,
2-3 tsp. starch,
6 tbsp. l. shaving foam,
dye,
borax.

Step-by-step instruction

You need to pour glue and water into one bowl.

Add creamy body lotion, make the liquid homogeneous.
Add starch and mix again.
Add shaving foam and distribute it evenly throughout the mixture.
Color the slime.
Pour in a few drops of borax, working continuously with a spatula.
If the mass has thickened but remains sticky, knead it with your hands.

Watch this video on how to make airy slime:

Safety regulations

Tetraborate is used as a preservative in creams and as an antiseptic, which can be applied to mucous membranes. Therefore, slime made with its addition is suitable for play. After all, when used correctly, the product does not pose any danger. The exception is people with individual intolerance to a chemical solution.

Tetraborate may cause a chemical reaction. In this case, it is better not to use it.

When preparing slime with the addition of sodium tetraborate, you must adhere to the following safety rules:

avoid contact with eyes;
do not ingest;
do not make edible slimes with this substance;
Use only special containers when making slimes;
After playing with slime, you need to wash your hands thoroughly with soap.

Glossy with oil for baby skin

This slime has a glossy shine and shimmer. It is also very soft, so it has a flowing texture, but it can also be assembled into rosettes.

Ingredients for glossy slime

2 tubes of transparent Brauberg glue,
1 tube of Luch glue,
1 tsp. oils for baby skin care,
1 tsp. rich hand or body cream,
a drop of dye,
aqueous solution of sodium tetraborate (2 tsp per 1 glass of liquid).

Cooking method

Mix both types of glue well in a cup.
Add butter and cream, mix too.
Tint the mass with liquid pigment.
Pour in a few drops of thickener.
Mix the slime well.

Watch this video on how to make glossy slime:

Sequencing

Fill half the mixing container with polyvinyl alcohol. No matter what the volume of the container, the main thing is to accurately observe the proportions.
Pour in two teaspoons of borax and stir slowly. It is necessary to mix thoroughly until the clots are completely removed and a homogeneous mass is obtained.
After thoroughly mixing the mass, you should get something resembling a slime. It needs to be thoroughly mashed and mixed thoroughly until fully cooked.

Now you can play with him. This slime should also be stored in a closed container. The better the storage conditions and the less contaminants that get on the toy, the longer it will last. Polyvinyl alcohol is a polymer, like other glues, milk and other substances, therefore, when interacting with sodium tetraborate, they form a chemical bond that is not very stable, and the bond may break down as you play.

From raw egg white

Slime made using the proposed method is light and small. But you can stretch it until it becomes transparent and blow out bubbles. It’s better to store it in a cool place so that it doesn’t spoil longer.

Ingredients for slime

1 chicken egg,
2-3 tbsp. l. film masks,
a little paint,
sodium tetraborate or Teymurov foot spray.

How to make it at home

Remove the white from the egg, that is, punch a hole in the shell through which the desired component is shaken out into a cup.
Beat it until fluffy, using a whisk or mixer.
Add the film mask and mix.
Add color to the liquid.
Pour sodium tetraborate into it, knead until thick.

Watch this video on how to make slime from an egg:

How to make slime 20 times bigger

No matter how implausible it may seem, there is a way to increase the size of the slime by 20 times:

pour warm water into a cup and put the slime in it;
the toy must be kneaded in liquid until the entire mass becomes homogeneous;
glue is added to it and mixed;
then, one by one, you need to supplement the composition with shaving foam, starch, hand cream, liquid soap, each time working at the base with a spatula;
at the end you need to pour in an activator (concentrated washing gel, sodium tetraborate, lens liquid with soda, etc.);
All that remains is to knead the mass until it stabilizes with a spatula, and then knead it in your hands so that the slime does not stick to them.

There should be a moderate amount of additional components from step 4 so that the base succumbs to the influence of the activator. All of them together should be taken less than glue. That is, the same rules apply here as when making a new slime.

With light plasticine

This is one of the easy ways to make butter slime. It spreads like butter, but also stretches and clicks well.

What to make butter slime from

60 ml PVA glue,
0.5 tsp. water,
1-2 tsp. liquid soap,
0.5 tsp borax,
a bag of light plasticine.

How to make

Pour water into the glue in the cup.
Add liquid soap to the mixture and shake everything with a stick.
Pour in borax, stir until curdled.
When the slime stops leaving marks on your hands, you need to mix it with light plasticine until smooth.

Watch this video on how to make butter slime:

https://youtu.be/WU25HI-4es8

What components will increase the size of the slime?

The first step is to decide why you plan to increase the volume of the toy. Based on this, the optimally suitable remedy is selected.

To get the desired result you can use:

warm water;
saline solution;
shaving foam/gel/mousse;
talc/baby powder;
corn or potato starch;
kinetic sand;
light plasticine.

The ingredients are selected taking into account the type of slime. This is a very important condition, because adding a component to the toy that was not previously included in its composition can completely ruin the slime. If its texture does not accept the new ingredient, the mucus can simply be thrown away.

From Vaseline and glue

This recipe is used to make jelly slime, which also has a shiny surface. So this toy can be considered both a jiggly and a glossy. The slime stretches well and makes a loud click when touched.

Components

200 ml hot water,
a jar of Vaseline (10 g),
dye,
3 tubes of transparent glue,
0.5 tsp. sodium tetraborate.

Do it yourself

Place Vaseline in the water and use a spoon to help it dissolve.
Add some paint.
Pour glue into the liquid and stir.
Add sodium tetraborate drop by drop and work the mixture with a spoon until it thickens.

Watch this video on how to make slime from water and Vaseline:

Tips and tricks

All slimes made with tetraborate are toxic and should not be given to small children. Closely monitor how your child plays with this slime, otherwise there is a risk of food poisoning.

Like all slimes, these also need to be stored airtight, otherwise they will dry out and will be impossible to use in the future.

Do not use cold liquids when making slimes. The most optimal temperature is room temperature. Some recipes call for hot water, but that is allowed too.

It is better not to place the finished slime on dusty, dirty or fluffy surfaces, as it will collect all the dirt and hairs. Afterwards it will be almost impossible to play with him.

From shower gel and hand cream

This method can be used to make large rainbow slime. Its texture is so delicate that the shades of the colors used imperceptibly flow into one another. And the abundance of oil components makes the slime also glossy.

Components

100 ml transparent glue,
50 ml PVA glue,
1 tsp water,
1 tsp body milk,
2 tsp. shower gel,
1 tsp. hand cream,
0.5 tsp. aqueous solution of sodium teraborate,
4 different dyes.

How to make slime

Mix both glues.
Pour water into the same cup and spread it with a spatula.
Add body milk, then shower gel, stirring the liquid after each ingredient.
Supplement the mixture with hand cream.
After thoroughly stirring, pour in the sodium tetraborate.
Knead until thick with a spoon, then with your hands (if this does not help, you should add more activator).
Divide the slime into 4 parts, paint each one a different color by dropping pigment and squeezing the mass with your fingers.
Place the segments in a container next to each other, tightly, close the lid and do not touch for 2 days.

We recommend reading about how to make slime without a thickener. From the article you will learn about options for making slime with and without glue. And here is more information on how to remove slime from clothes.

Sodium tetraborate makes creating slime very simple, this thickener works flawlessly. The main thing is not to put too much of it, do not waste time kneading the mass. And if there is an excess of thickener in it, you can save the toy with water, shower gel or fatty cream.

Useful video

Watch this video on how to make glossy slime:

How to increase without tetraborate

It will be possible to increase slime that has shrunk in size without sodium tetraborate if you do not use thinning components for this, but take:

Starch . You need to pour a small amount of product onto the surface of the slightly rolled out toy. Then they knead it so that the grains are not visible. Do the same when adding subsequent portions. You need to monitor the consistency of the mass. If it seems too thick, which is possible if there is too much starch, you can add a little shampoo. After this, the toy is kneaded again with your hands.
Kinetic sand . It also needs to be added in portions, mixing each portion into the slime.
Light plasticine . The nuances of its use were described earlier.