DIY unloading vest pattern. DIY unloading vest. We cut and sew

The first tactical unloading vest was born in Italy half a century ago. Its prototype is a belt-shoulder system, consisting of a wide belt with two straps that go over the shoulders. Initially, the purpose of the RPS was to place ammunition on it for carrying.

The vest is sewn from raincoat, denim or thick cotton fabrics in soft colors. It can be made with or without lining. Cotton lining fabric should be pre-moistened and ironed. If you decide to do without a lining, then the internal seams should be finished with a zigzag stitch or edged (with braid, for example).

A fishing life jacket is a necessary attribute for any experienced fisherman. Many beginners mistakenly believe that fishing is an active, interesting pastime that does not carry any threat.

But situations on the water can be different; the possibility that the boat may puncture cannot be ruled out, and sometimes fishermen fall into the water while fishing for large fish. If a person is wearing a safety vest, he will in any case be able to stay afloat for some time and swim to the shore.

How to choose a life jacket for fishing and is it possible to make it yourself?

Depending on the weather conditions and the method of fishing, the following types of unloading vests are distinguished:

• A universal vest, used in any season, except winter and sultry heat, and for any type of fishing.
• Summer unloading: differs in the sewing material used, which allows air to pass through.
• Insulated - made with a multi-layer lining, used in the cold season. It features a smaller number of pouches so as not to restrict the spinner’s movements.
• Vest-backpack: wears like a regular backpack, but has a vest on the front instead of straps.

An unloading bag for a fisherman should contain many pockets, have strong seams, and it is also preferable to have a moisture-resistant pocket for storing things that are afraid of moisture, as well as convenient pockets with Velcro rather than zippers. If the fishing is fly fishing, a mandatory part of the unloading is the presence of attachments for baits.

Parts of the pattern need to be transferred from paper to fabric, then they are cut out and basted, and, if necessary, adjusted to the figure. At the same time, all the pockets with covers must be marked, and their dimensions must be observed so that the previously selected plastic containers can be placed inside them.

When the product is adjusted to all dimensions, you can sew its parts together using a sewing machine. Lastly, the lining and trim of the collar, sleeves and hem are sewn on.

Very often, fishermen, tourists and ordinary vacationers neglect the rules of safe behavior on the water. Due to a negligent attitude towards one’s own life, dozens of accidents occur on reservoirs every year.

Unfortunately, not everyone has personal rescue equipment, but you can make them yourself using available materials. Our detailed master class on how you can make a life jacket with your own hands without putting in significant effort will help you with this.

Life and safety vests for fishing primarily ensure the individual safety of a person on the water, maintaining his buoyancy for an extended period of time and protecting him from impacts. Modern vests have many secondary functions that are related to fishing in one way or another.

The main difference between a life jacket and a safety vest lies in their buoyancy. Safety nets are usually stuffed with sheets of light and elastic foam 3-4 mm thick, which is used when packaging some goods. They are lightweight and comfortable, but will not last long on the water, so they are good for people who know how to swim and are intended for use in small bodies of water.

Life jackets use thicker sheets of foam, starting at 8mm. Such sheets are more dense and have large honeycombs containing air. The walls of air bubbles make the filler sufficiently dense, elastic, and can withstand slight compression during operation or transportation, thereby increasing buoyancy.

Life jackets differ in design: the first type includes inflatable ones, the second - vests with foam filling. The former are compact and easy to transport, but are less durable, can restrict movement and do not fit tightly to the body, unlike vests with foam filling. The latter are more durable and protect against impacts, although they take up more space in luggage.

What you should pay special attention to when choosing a life jacket:

• volume. If you choose one that is too bulky, you run the risk of being clumsy and restricted in your movements, which may make it difficult to climb back into the boat or swim to shore. A small one will give an advantage in movement, but there is a risk that it will weakly hold a person on the surface of the water. The optimal volume is 18-25 liters;
• the size is determined taking into account the weight and chest circumference of the fisherman;
• if you plan to travel a long distance from the shore, then it is better to have a vest of a bright, catchy color;
• special attention should be paid to the seams of the product: they must be double, strong, like the fabric itself;
• The more belts and slings a vest has, the easier it is to adapt it to your needs. This is important because it should fit snugly without loosening or coming loose. Having an additional crotch strap would be helpful;
• Factors such as thermal insulation also matter;
• It wouldn’t hurt to equip the fisherman’s vest with a whistle and reflective stripes at the top.

Anglers do not always use life jackets. The reason for this may be not only carelessness, but also their high price. In this case, you can make a life jacket for fishing with your own hands. It probably won't be very pretty, but that's not the most important thing when saving a life.

To make a vest you will need:

• waterproof durable fabric (you can use an old jacket, remove the sleeves from it and increase the cutouts);
• foam for filling. Empty plastic bottles can be used, but they are less resistant to damage;
• parachute lines or durable synthetic tape;
• 2 – 3 carabiners and buckles.

The hunter's vest is an integral element of clothing. Among the many models, there are two main options: the classic vest-bandolier and the tactical vest for hunting.

Variety of species

For every type of hobby there is plenty to choose from in stores. Vests are:

1. Warm and cool. The type of material depends on the season. In the winter version, the lining is made of waterproof fabric. For summer, a mesh is comfortable and will allow the body to breathe.
2. Various colors. They provide the opportunity for camouflage in any area, taking into account the time of year and weather.
3. Light and weighted. The latter are sewn specifically for lovers of underwater hunting.

Classic bandolier vest

When hunting, sometimes seconds make all the difference, so you need to have ammunition on hand. The classic bandolier vest is equipped with chest pockets for storing cartridges, which allows you to quickly reload the gun. A special material sewn into the place where the butt rests, called a “cushion,” softens recoil during shooting.

Unloading hunting vest

The difference between this type and the previous one is that it is equipped with a large number of compartments and pockets. Such hunting vests have special fastenings and are used to accommodate additional equipment. They have space for a walkie-talkie, knife and other devices. There will be somewhere to put food for your faithful assistant - the hunting dog.

Such models are heavier than classic ones and are made of dense materials. They evenly distribute the load and completely replace a backpack or bag.

For spearfishing

This vest has a minimum number of pockets, drawstrings and straps. The diver does not need them; moreover, they increase the risk of becoming a prisoner of algae and driftwood lying on the bottom. To easily dive to the desired depth, special lead ballast is installed on the front and back of the vest. In the event of an emergency underwater, the diver quickly throws off the vest, thanks to convenient clasps, and floats to the surface.

This item of clothing is made from non-buoyant materials with high density. These vests are also worn when going fishing.

Choosing the style and fabric of men's vests

The counters of modern stores are ready to offer fabric that meets the requirements of the most fastidious fashionista.

Different colors, textures, and composition can complicate an already difficult choice.

The fabric for the vest should be chosen based on the style.

Types of men's vests

Let's look at what types of men's vests exist :

• solo vest;
• vest - leather jacket;
• classic vest;
• vest-frock coat;
• knitted vest;
• insulated vest.

The solo vest attracts all the attention. This option should fit the figure, but be wide at the armholes so that the bottom layer of clothing looks neat. The model visually tightens and makes the figure slim. A standard pattern for such a vest will not work. Lapels, a stand-up collar, and a round neckline will make the item sophisticated.

A leather jacket vest will complement a brutal biker-style look. Ideal for any time of year. You can wear it with T-shirts and various jumpers.

A classic vest will be an integral part of a classic suit for business meetings, trips to the theater and official receptions. Such a thing made of thin material will be an excellent addition to any man’s wardrobe. It can be worn with or without a jacket, on a shirt, long sleeve, or jumper. Classic vests can be made from different fabrics: from knitted to cashmere.

A stylized vest-frock coat will help to emphasize that you belong to a bygone era of luxury . You will have the opportunity to show off in such a unique thing at the New Year's carnival.

A knitted vest can not only complement the image of a modern man, but also keep him warm in cool weather. You can wear it with long sleeves or long sleeve shirts.

An insulated vest will be a complete replacement for a jacket in the cold season. As a rule, it is sewn with a synthetic padding lining and a hood. You can wear the vest over a warm jumper, long sleeve, or shirt. It all depends on the air temperature. In the most severe frosts, such a vest can be worn under a winter jacket. Another option for an insulated men's vest is tweed . Thick material will keep you warm in cool weather. Can be worn with either a classic trouser suit or jeans.

Attention! When choosing a style, you should take into account the characteristics of the male figure. Wrap vests are not suitable for stocky men. Solo vests will look great on tall people.

Fabric selection

The selection of material depends on the type of vest chosen. Let's look at the most popular types of fabrics.

Wool fabric is made from natural animal hair. These can be sheep, merino sheep. The highest value raw materials are cashmere goat and Peruvian llama - alpaca. To reduce the cost of the material, cotton or synthetic fibers are added to the composition. This fabric has a high degree of wear resistance. Over time, it does not lose its aesthetic qualities. The wool content in the fabric structure may vary, but the more natural fiber it contains, the warmer the item will be.

Knitted fabric is available in various shades and textures. Material with diamonds, stripes, large knitting is perfect for everyday vests. Its composition can be different: from synthetic fabrics to natural cotton and wool.

Advice! This season, vests in gray and burgundy shades are at the peak of popularity.

Warm clothes are made from tweed It contains wool fibers that will keep you warm in cold weather. The fabric is soft and pleasant to the touch. Its surface is covered with small fibers.

Advice! In order for a tweed vest to please you for a long time, and for the material not to pill, you need to choose fabrics made from boiled wool.

Shiny synthetic fiber fabrics with lining are not suitable for a solo vest. The leather jacket is made from genuine leather, but you can also use its environmentally friendly analogues. To sew a masquerade frock coat, you need to stock up on brocade.

This is interesting: Men's jumper pattern (size 46-52)

DIY unloading vest

The stores offer a good selection of this type of clothing, but vests are easy to sew yourself at home. They can be adjusted to individual measurements, with as many pockets sewn on to make them comfortable and fit the necessary equipment.

Hunting unloading is easy to sew, the main thing is to familiarize yourself with the stages of work.

To begin, prepare the material and accessories. To get the vest right, you will need:

1. High density fabric - waterproof synthetic or raincoat fabric.
2. Lining - depending on the season (mesh or cotton for warm periods, sheepskin for winter).
3. High quality lock.
4. Snaps or Velcro to close pockets.
5. Nylon threads.

To work you will need:

• sewing machine;
• needles;
• scissors;
• chalk or sharpened bar of soap.

Initially, you should measure the chest circumference, waist, shoulder length and armhole volume. The parameters of the circles are recorded by dividing the values ​​in half, the length - without changing. After this, patterns for the front and back of the future vest are drawn and cut out of paper, as well as pockets and other small elements.

The patterns are transferred to the fabric with chalk or a piece of soap, leaving seam allowances of several centimeters. The parts are carefully cut out. Next, pockets and fasteners are basted to the shelves, and those, in turn, to the back. The first fitting is carried out over the clothes in which you plan to hunt. If the piece sits nicely and does not interfere with movements anywhere, the vest is stitched together on a sewing machine.

Otherwise, you need to correct the failed details.

Taking measurements

Before you start sewing, you need to take your measurements correctly. The quality of the sewn product and its fit on the figure depend on this. To do this, you will need a measuring tape, a small piece of cord, a sheet of paper, and a writing object.

Tie the cord around your waist: it shouldn’t dangle, but you shouldn’t tighten it too tightly either. Then start measuring the parameters, the person being measured should stand straight:

• Chest circumference - measurements are taken along the lower edges of the shoulder blades at the most protruding points of the chest.
• Waist circumference - Measurements taken at the narrowest point of the waist (at the tied waist cord).
• Hip circumference - measurements are taken at the widest point of the hips.
• Shoulder width - from the base of the neck to the edge of the shoulder.
• Front length to waist - take measurements from the base of the neck to the waist line along the protruding points of the chest.
• Back length to waist - take measurements from the base of the neck to the waist along the back.
• Back width - the distance between the extreme points of the shoulders is measured.

Important! In order not to forget the parameters, record each measurement on a piece of paper.

Comparison of the most popular models

Vests are popular not only among hunters or fishermen. Tourists, geologists, cyclists, paintball enthusiasts do not deny themselves the pleasure of wearing comfortable clothes that suit their activities.

If you need to have a lot of things with you that you may need at any time, then you should buy a weight-bearing vest. It has a bunch of pockets of different sizes, where absolutely everything fits: ammunition, a walkie-talkie with a first aid kit, and a flask with water.

About a hundred years ago, the ammunition that needed to be carried was carried on a belt-shoulder system - RPS. This is such a wide belt, to which two straps are attached for throwing over the shoulders. However, the width of the belt is small, and it was not possible to fit everything on it. Then unloading vests appeared - their first models (Italian) saw the light in the middle of the last century.

The main feature of the vest is the pockets. They allow you to distribute the weight of the equipment evenly throughout the body. In addition to pockets, pouches are hemmed - all this is positioned so that the back is free. As a result, there is less load on the spine and more comfort. A good tactical vest should:

• Be durable and fire resistant;
• do not interfere with moving on your belly;
• do not interfere with the use of technology;
• contain no less than a double combat kit;
• have reliable fittings.

Preparation of patterns

Let's take a classic men's vest as a basis. Its cut should match the model of the jacket and harmoniously complement it. Patterns from magazines do not provide a detailed description of the technology; the required size cannot always be found. Let's look at an example of how to properly cut a men's vest.

Classic men's vest

To prepare a pattern for a classic men's vest, take a sheet of paper, or special graph paper for patterns:

• We retreat 7 cm from the top of the sheet and write X.
• From X, draw a line to the right parallel to the edge.
• From X we retreat down the length of the back to the waist. Add 1.3 cm for seams. We write 1.
• From 1 up, measure half the distance of the length of the back to the waist. It will be 2.
• From 1 down we retreat down 7.5 cm. This will be 3.
• To the right of 2 and 3 we draw horizontal lines.
• Divide segment X2 in half and write 4.
• From 1 we measure 1.3 cm to the right. We mark 5.
• Connect 4 and 5.
• From 5 we measure 1.3 cm to the right. We write 6.
• From X we retreat to the right 9 cm. This will be 7
• From 7 we retreat upward 2.2 cm. We write 8.
• At the intersection of the line 4 – 5 with 2 we write 9.
• From 2, set aside ½ of the chest volume to the right and add 7.5 cm. Write 10.
• From 10 we draw a vertical line. It should be parallel to the line X - 3.
• From 10 to the right we retreat 1/3 of the length between points 2 and 10. We write 11.
• From 11 we draw a line vertically up and down.
• We place 12 at the intersection of lines from 2 and through 11.
• Point 13 is located at the intersection of lines 10 and 1.
• To the right of 2, measure ½ of the back width to the right and add 1.3 cm. This will be 14.
• Draw a line up and down from 14.
• From 14 we retreat 2.5 cm down. There will be 15 here.
• Down from 11 we measure 2.5 cm and write 16.
• We mark segment 15 - 16 in half. In the middle we mark point 17.
• Draw a vertical line from 17, connect it with the segment 1 – 13.
• We put 1.3 cm to the right and left from 18. On the left we write 20. On the right we write 21.
• Through 17, 20, 19 and 17, 21, 19 we draw smooth lines.
• At the connection of X and 10 we write 22.
• From 22 we put 9 cm to the left. Here we mark 23.
• From point 10 we put 2.5 cm up. We write 24.
• We connect 23 and 24.
• Up from 15 we measure 15 cm. We write V.
• From 11 upward we retreat 15 cm. We mark S.
• We divide segment B - C in half and write D.
• We combine 8 and 9.
• From point 8 we put 10 cm to point D. We mark 25.
• From 23 we measure a length equal to the distance between 8 and 25. We put a point at 26.
• From 27 to the left we measure 5 cm. We write 28.
• From 28 we retreat 5 cm downwards. This will be 29.

Round off sharp corners. The pattern is ready.

Attention! Any vest is not fastened to the lowest button!

A little about the design of the unloading vest

Colors

Most often, this item of clothing has one of the following colors: black, olive, green. There are also camouflage colors with different combinations of shades. The color should be chosen so that it blends in with the area as much as possible. This rule applies to all use cases.

Material for sewing a vest

The first unloading vests, made of canvas and leather, weighed a lot. Therefore, later they began to use lighter synthetics (sometimes even a special mesh fabric) for sewing them. In particular, one of the most popular materials is cordura (otherwise known as cordura). This is an American fabric made from specially woven nylon threads. It is extremely durable and very light, and its price is quite reasonable.

What types of fastenings are there?

Initially, pockets and pouches on vests were fixed rigidly, and their size was fixed. Such models are called “with integrated pockets”. Here you have to use what you have - you can’t change anything individually for yourself. But when running fast, the pocket will not fall off.

Now they have begun to make a second option - modular, when pockets and pouches can be removed.

There are several fastening systems, the most popular is Modular Lightweight Load-carrying Equipment. Abbreviated as MOLLE. Here, horizontal fabric ribbons with slots are sewn onto the removable parts and on the vest. By threading a fabric sling through them, you can easily attach (or remove) any element.

Pouches

The purpose of the pouch is to store a supply of ammunition. Therefore, it is reasonable to select it for a specific type of weapon (this is where the advantage of the modular system manifests itself). However, they are now producing pouches for any necessary items: flasks, first aid kits, documents, various small items. The material used is leather or cordura.

Why does a gun belt need a limiter?

Some models of vests (for example, Tarzan) are equipped with an original “gadget” - a belt limiter. He does not allow the machine gun to insidiously slide off his shoulder. According to user reviews, this often happens. So the limiter is a useful thing. But in the summer, when the vest is worn without a jacket, it can sometimes create a little discomfort.

Tactical homemade and new products)

What is the fundamental difference between “civilian” and “military” backpacks? Camouflage?

I divide backpacks into tourist (bright color, no MOLLE, wide straps) and tactical (respectively, camouflage, MOLLE, butt straps and “scalability” of the system - one can always be attached to the other, parts are interchangeable)

Well, that’s also a very conditional division) I’m telling you, you needed molle compatibility, ease of execution and, okay, it was tactical, wow!) It seems like everything)

And I called civilian backpacks those that were created for gentle operating conditions. Such an experience: in the absence of armor, a backpack filled with bricks/sandbag is used as weighting materials. Barbarism, that's understandable. But the RDshka is alive, the unidentified foreign sample of the three-day backpack is alive, and a completely usable and durable ordinary backpack is in rags. In principle, initially they were taken for slaughter, but the fact that those backpacks survived him is an indicator. But again, I’m not proving anything, I’m just talking about preferences))

Getting to know the manufacturers

UTG Leapers

The Leapers company, with an office in the US state of Michigan, has been specializing in products for sports, shooting, and hunting since 1992. She makes vests for unloading very well. They are bought by security forces, airsoft players, and hunters.

They are conveniently fastened with a zipper, and the presence of three adjustable straps makes the product universal. Both thin and overweight people will be able to adjust the vest to suit themselves (by varying the height of the torso, waist size and fullness).

Nine pockets (for documents, flashlight, radio, cartridges, rifle magazines) are closed with Velcro and have holes where water flows out. There is also a belt for a pistol and a pouch for it, and an inclined type holster. And if all the equipment doesn’t fit, then you can fasten something on your back - there is such an option.

For comfort:

• There are shock absorbers on the shoulders;
• ventilation meshes are provided for ventilation;
• there is a special grip on the back (to pull out the wounded).

Tarzan

This famous domestic product weighs 1.1 kg. It is actively used by FSO and Airborne Forces fighters, and airsoft players. They make vests from Cordura 1000 in two colors: olive and Woodland. The fastener is a thick tractor-type zipper plus a Velcro flap. Using the slotted buckle, you can adjust the vest to your height (from 1.64 to 2 m). Size – from 46 to 48.

MOLLE straps are sewn across the front along the entire height and at the back in the upper part, which allows you to temporarily attach something to your back (for example, a generator). To prevent the contents from falling out, the pouches are equipped with elastic bands.

They have grommets at the bottom - water flows out there if it gets full. Inside the vest there are two pockets where you can hide documents. They have a Velcro fastener.

For convenience there are:

• Rescue loop on the back;
• weapon belt limiter;
• large loop with a lock.

A laser target designator is a good thing that allows you to clearly identify the target. But it's not cheap. We suggest doing it. Instructions and tips can be found in this article.

Review of the popular tactical weapon belt Dolg M2 in Russia and abroad. Video review from the creator and instructions for use.

Vest named "Tank"

And another model in olive color made of Oxford fabric and nylon with a MOLLE fastening system, which is sewn for special forces soldiers. A very versatile product - it can be adjusted to sizes from 46 to 60! The fastener is a zipper and two fasteners. I am very pleased with the special system for attaching pouches - completely silent. The length of the straps can be adjusted by securing them with Velcro.

Video review of the Tank unloading vest:

The set includes thirteen pouches, of which two are double and one small universal (for attaching to the back). There is also a large zippered bag (bucket bag) and a tactical belt. There is also a rescue loop.

Smersh

And this vest, designed for AK, is produced by a Russian manufacturer - SoyuzSpetsOsnaschenie. And again we have a fastening system with tape slings - MOLLE. Product colors: olive, black, camouflage. The kit of this product includes two pouches for, as well as four pouches for machine gun magazines, one for a walkie-talkie, two for a VOG-25. The kit also includes a large bag (sugar bag) and a first aid pouch.

Rock

A domestic manufacturer produces this vest with the strongest reinforced fittings for AK. It was developed taking into account the battles in the Caucasus.

Molle tape fastening system, shoulder adjustment, soft shoulder inserts, the ability to change sizes (from 46 to 60) are the advantages of the model. The product weighs only 0.805 kg.

The vest can be filled with eight AK magazines, as well as a sufficient number of pockets: two each for a first aid kit with small change and flares, RGO and RGN. In addition, you can also attach a large pocket at the back, adjustable with straps.

Ciras

The last vest in the review (Ciras Maritime) is also equipped with the Molle system, a soft lining with a damping effect and large Velcro.

It is made of sand-colored cordura and can be adjusted in height and volume. The manufacturer is well known in the world of airsoft equipment - this is the company Flyye industries.

The vest includes five pouches for ten machine gun magazines, two for pistol magazines, as well as pouches for a walkie-talkie, documents and all sorts of household items.

Save money: sew unloading yourself

It’s no secret that you will have to pay quite a bit of money for a finished vest (several thousand rubles). But if your hands are not afraid of work, then you can build a quite decent unloading vest.

Making a pattern

Patterns can be made from newsprint or old wallpaper. Look carefully at the finished models and draw something similar, adjusting the pattern to your liking. Shred and cut until you are happy with the result. Everything should fit well and nothing should stick out!

We select materials

The best fabric is cordura. Choose the color to your taste. But you can take durable nylon, nylon, and other durable synthetics. Who knows - maybe you have a piece of suitable material lying around for such a case. This will save even more money. Don't forget about the lining.

You will need more slings - you need a lot of them. After all, we will be making a vest with the Molle system.

And you need to buy high-quality and reliable buckles (preferably three-slit ones, for example, from Duraflex).

We will sew with nylon threads. And prepare a chalk or marker for markings, and a detachable zipper for the fastener.

How to unload in 1 minute on the battlefield:

We cut and sew

We cut out the necessary parts from the front and lining fabric, and then begin to sew on the slings (on the front side). This will be a long time - get ready. To make it smooth, we make markings. Then we decorate the collar (you can put soft filling inside) and the back. On it we sew six buckles on the horizontal slings and two on the slings coming from the collar. Making a rescue handle. Then you can sew a pocket (or two) on the lining. Let's make it with a zipper so you can put documents there. All that remains is to connect the lining and the face, sewing a zipper between them. And then decorate the bottom of the product with a belt (so that it fits tightly).

The vest is an excellent option for clothing professionals and amateur hunters. For a hunting enthusiast, including underwater hunting, this is a basic piece of equipment. A hunting vest simply cannot be left without close attention, so we will try to highlight its main functions and advantages.

Every newcomer to hunting already imagines himself in a special hunting vest. But an experienced hunter has clearly already purchased more than one model. Truly, hunting vests are like another layer of skin for a hunter. And a well-chosen camouflage color will make it possible to use it as outerwear, both in summer and in cold weather, right up to the first frost. Winter options are traditionally white, lined with fleece, which gives coziness and comfort. .

In principle, hunting vests are manufactured in two basic versions:

• classical,
• unloading.

What is their functionality?

Witnake or again from nothing. Part 6

Good day to all!

Whoop, and we return to our Witnake and its deck. Created, ahem, from matches. Yes, the decision is extremely strange, but the level of budget of the ship in this category and my personal strange preference to make it specifically from matches contribute to it.

I will make a reservation that this is the dirtiest process of all related to the ship. Washing your hands ten times an hour while gluing the body is nonsense. But to understand that slivers from matches and similar garbage have enslaved the space - that’s another thing.

And also in the process you learn that in one sitting you can watch a series 775 episodes long. so, wait, what am I talking about.

Oh yes, the creation process is quite simple: we take an excess of matches, bite off the head of them and slightly flatten them back so that the cross-section is still square (and not like one of the suits of playing cards), then we take a match and coat it with glue with a pencil, glue it to cardboard.

I chose the pencil glue not by chance, but for the reason that it takes a long time to dry, but when completely dry, it sets well. Why is this necessary? So that if something doesn’t fit completely somewhere, you can lightly press it down and it will move, but not lose its grip on the cardboard base. In short, it gives you the right to make mistakes (though only until it is completely dry).

I've made a deck out of pencil before, but the gap turned out to be so large that I forgot how to do it best. And when I already got a taste for this deck, I began to remember. The point of laying with matches is in their strange shape - in almost all cases they are bent, bent, split, disheveled, cracked, broken, etc., etc. In a word? Different. For this reason, their installation is similar to a mosaic, where you find a match of the desired shape, place it to understand whether it will fit correctly or not, and if it fits, then glue it. If not, we are looking for the next one, since there are many of them.

I started approximately from the center and stuck to it. This was the right tactic, given the curvature of the future sides (this is obvious). Therefore, in some places it was necessary to cut, shred, and grind down the unfortunate matches so that they would simply fit in certain places. True, I didn’t go overboard, if they felt like passengers on a bus at rush hour - I stopped and looked for a different approach.

There's a certain charm to a matchstick deck. They're not perfect. And they don't lay perfectly flat like cut (any other) material? But at the same time they convey their direction. Ugh. And in the photo you can see how we had to cut out inserts for small places. Well, those where only a 4 mm long match fits. With its thickness of 2 mm.

And the matches themselves confirm the level of the ship’s budget. Starting from the fact that everyone has them (the only question is quantity) ending with their low cost in the store. At one time I purchased them for other purposes, but having paid mere pennies, I acquired a supply of wood, it seems to me, for three of these Witnake in advance. If I do them. (Will?)

Advantages

The choice of the desired vest for hunting can only be ensured by the hunter himself. Whether it will be open or closed to carry projectiles is your decision. And the design itself will allow you to do without even precise parameters, because there are tie straps that regulate the girth in the widest places.

Continuing the pocket theme, a great solution is the hidden details for documentation and patch options on the back, which are equipped with the unloading version. This is a convenient way to store things that should always be at hand. Contact specialized stores for purchase, where they will definitely select a worthy model for you.

Of course, the main disadvantage of such a hunting vest is the presence of excess weight, especially when you walk twenty kilometers, and every extra kilogram makes itself felt. This is also very significant during a successful hunt, for example, a wild boar. But the advantages are undeniable, especially for unloading models, which will be discussed later.

Unloading vest

Classical

There is no doubt that this type of hunting unloading is especially popular in hunting circles. Its main advantage is easy fixation of the size you need. And the side fastener system will give the owner a comfortable fit to fit the body type in almost any situation.

Why is it unloading? Because it does not have pockets for cartridges, but instead has a hinged pouch for hunting unloading. Their clever and multifunctional arrangement is the key to the popularity of this model. When choosing, pay attention to multi-layering in winter versions and the presence of ventilation of the fabric in summer ones.

Underwater

Unloading for hunting is also relevant for the underwater version. After all, a hunter’s complete equipment should have the goal of saving the owner’s precious strength. And the right unloading vest for hunting will help with this. Unloading models for spearfishing have fasteners that prevent displacement during dives and, just like for regular hunting, they are adjusted to an individual size.

If an emergency situation arises, then with quick disposal and unloading, it will not be difficult to float to the surface.

Unloading for the hunter has been achieved!

In addition to hunters, this type of clothing is also in favor among fishermen. So, for example, a protective vest, equipped with several pockets on the front and a large pocket on the back, is indispensable for a fishing enthusiast, an ornithologist, a geologist, a cyclist, a tourist, and simply for a person who loves active recreation.

How to do unloading yourself

Not everyone can afford to purchase expensive hunting equipment. In these cases, skillful hands will come to the rescue. With some experience, patience and accuracy, making an unloading vest with your own hands is a fairly simple task.

How to do it?

1. First, we select the material. The ideal choice is water-resistant military fabric, khaki raincoat or camouflage. Calculate with a width of 1 meter approximately 2.5-3 m of fabric to be harvested.
2. We take body measurements. They need to be done in outerwear.
3. Thirdly, we cut out life-size parts using paper or fabric forms. This will allow you to sweep away the finished pattern and try it on.
4. Fourthly, we transfer it to the fabric and sew the pockets and cells into separate parts.
5. Fifthly, we sew the cut parts into the finished product and process the seams.
6. Sixth, fasten the fasteners.

As you can see, making a hunting vest yourself is not as difficult as it seems at first. The main thing is to choose high-quality material, synthetic threads and make the model closed for unstable weather.

We sew a simple and high-quality foam vest on a sewing machine

You can sew a more durable and durable model yourself using a sewing machine, selecting sizes for the whole family.

In this case, a special fabric for life jackets is used, which can be purchased at a specialized store. But you can get by with any other waterproof material. It is advisable to use fabrics of bright colors that are visible from a long distance, and additionally sew reflective inserts on the front and back of the product.

We take measurements and build a pattern from cardboard. We focus on the diagrams below.

For an adult, you can replace the vest with a life bib, which has a simpler design and is therefore easier to manufacture.

We cut out the parts, placing a small allowance on the seams. We sew the outer and outer parts of the product separately. We sew each seam 2-3 times, retreating 1-2 mm. To the outer part of the vest we sew horizontal slings with fasteners with double seams. It must be remembered that the edges of the slings must withstand significant loads, so we do not spare the threads.

We fold the outer and inner parts of the vest with the front sides facing each other and stitch all the contours. We strengthen the shoulder seams by sewing pieces of slings onto them and stitching them several times in all directions. This is required so that the vest can withstand the weight of the person, because he will be pulled out of the water by the shoulders of the life-saving device.

We lay several horizontal seams along the width of the product and fill them with foam inserts, most of which we place on the chest. In this case, it is better to use not foam plastic, but foam tubes cut into small pieces of equal length, which can be bought at any hardware store. Unlike polystyrene foam, they will not bulge, and the vest will look much neater. We sew up all the seams of the product and sew in a crotch strap with a buckle.

Review of popular models

Vest-bandolier "Christmas tree"

This type holds 48 12 gauge shells. Fastex as a fastener is very convenient to put on and take off. The cartridges do not press with weight, which is evenly distributed. The vest is comfortable for any body movement and has half rings for hanging loads. The pockets are located in the front, and the back is equipped with wide straps for easy sizing.

Unloading vest "Umka M33"

The unloading vest for hunting Umka M33 is equipment for lovers of travel, hunting trips, and members of response teams. In front there is a power-type zipper as a lock. The volume can be adjusted using lacing. The shoulders are adjusted to the height of the owner, and also have a shock-absorbing cushion.

The model is equipped with mesh pockets inside, and pockets of different sizes on the lumbar part. Available in two colors - camouflage and black.

Unloading vest "Safari"

Unloading vest for hunting Safari is a hunting vest in a combat style, adapted for hunting. The pockets are evenly distributed, there is a reinforced zipper and two fastex fasteners in front. Front pockets are numerous and functionally designed for documents, for 12-gauge shells, for a knife, for small items, one large one in front and on the back for additional equipment. The removable holster is not forgotten either. There is a belt for an even better fit.

A reinforced zipper and two fastex go in front like fasteners. It is possible to adjust the height at the shoulders, and remove the width of the model at the sides.

Vest "SILVERS" for spearfishing

This spearfishing model offers exceptional energy savings. It is designed so that the load is evenly distributed in the correct proportions. According to professionals, to properly distribute the load is to place 60 percent on the waist part and the remaining percentage on the top.

It is worth adding that both beautiful women and ladies are not deprived of attention in terms of hunting clothing. Today, there are also women's fitted models of unloading vests on sale, in which ladies will feel comfortable.