Racks for storing wheels in the garage - design options

This article will be useful for any car enthusiast, because it will talk about proper storage of tires using devices such as a wheel rack in the garage. This addition is very convenient and practical, in addition, it will protect spare parts from damage and falls. In addition, like other tools and materials, automotive components and assemblies must be placed not on a concrete floor, but on special shelves. After reading the text, you will learn about the conditions under which tires should be stored, what kind of shelves and other accessories there are for wheels in the garage, and how a rack for storing tires is made.

Floor-mounted tire storage rack design Source pinterest.com

Under what conditions should wheels be stored in a garage?

With proper storage and care, protectors and wheels will last much longer. The benefit of this is obvious; it’s unlikely that anyone will want to spend extra money on buying new wheels. Following the rules for storing them in your garage is quite simple and inexpensive. Therefore, if you love your vehicle and save your family budget, be sure to listen to the recommendations in this article.

• The room must be at the appropriate temperature . However, this requirement is quite easy to fulfill - manufacturers claim that tire rubber can be stored in a temperature range from -30 to +35 degrees Celsius. But if the room is unheated at a temperature below for a long time warm them up before putting them on the car . You also need to pay attention to the fact that the racks should be no closer than one meter from the heating radiators .
• For better safety of wheels, they should be stored on special shelves , racks and stands . Such storage areas must have a flat surface and smooth corners , because if the rubber lies on a sharp surface for a long time, a mark remains on it. Protectors, the standard of which does not exceed 205 millimeters, can be stacked vertically on top of each other. But you shouldn’t stack stacks higher than two meters. Larger wheels are stacked horizontal rows.

Proper storage of wheels away from ultraviolet radiation is the key to long service life and preservation of the properties of rubber and, as a result, safety on the road Source garazhtyt.ru

• Protection from ultraviolet radiation is required . It destroys the structure of the material and because of this, the rubber fails . After prolonged exposure to sunlight, cracks that are very difficult to see with the naked eye. Their presence creates a danger that the wheel will burst while driving . And this often leads to very serious consequences.

In addition to these conditions, the key to good condition of tires after storage is their regular rotation. This should be done at least once every three months. This procedure is necessary to change the contact surface, so that the wheels are not subject to constant pressure. It is also desirable that the humidity in the room is 40-60%, and constant cleaning protects the rubber from dirt and dust. Also for these purposes, you can purchase a special vapor barrier awning for racks and shelves.

Important! Before storing the wheels in the storage system in the garage, they must be thoroughly washed and cleaned, and then dried well.

Great attention should be paid to protecting the garage from various gases or vapors. Most often, such troubles happen due to incorrect equipment. The condition of the wheels is also detrimental if oils, solvents or gasoline come into contact with them. Protectors must be protected from all chemicals and reagents. In addition, there should be no metals susceptible to corrosion near the racks.

Protect the wheels from any reagents or chemicals, and protect the rims from corrosion Source business24.ro

It is the discs that are most susceptible to moisture and dirt. Therefore, when storing them separately from tires, the room should be as dry and clean as possible. But most often the wheels are stored assembled, because then it will be enough to simply re-align them when installing winter and summer tires.

If your car room is built of metal, then you will need to pay increased attention to the temperature and humidity of the air. Also in this case, it will be convenient for you to use shelves for storing wheels in the garage on the wall. It is especially important for the safety of tires and wheels to have a hard floor covering and high-quality and extensive ventilation. But in any case, if you plan to store wheels in any room, then you should measure the humidity level and temperature and check the readings with the standards presented in this table:

Such parameters are established in our country by GOST and are based on research and experience. By doing them, you will create optimal conditions for storing rubber on racks in your garage.

Wall hanging shelves for storing wheels Source bouw.ru

Preparatory work

Zoning

Before starting design, it is necessary to resolve the issue of zoning and organization of free space

First of all, it is important to determine the location of the main work areas, after which it will not be difficult to find the optimal options and sizes of shelving. Recommended distribution of garage zones:

Recommended distribution of garage zones:

1. Always a free passage area.
2. An easy access area where the most frequently used items and things are located.
3. The place where everything is thin, tall and long. The optimal location of such items is vertical.
4. Area for large tools and equipment.
5. Workplace. Equipped with machines and devices.

Design

The process of making a rack begins with design.

First of all, you need to prepare a drawing that can be done by hand. It should indicate:

• geometric parameters of shelves;
• distances relative to walls and ceiling;
• dimensions of each element.

Racks with open shelves are most convenient for the garage. It is recommended to give preference to simple shapes and strict lines. The width of the shelves is chosen so that all the things that are planned to be stored in this place fit. The height of the rack can be different, up to the ceiling. Such massive structures are stationary and firmly attached to the walls and upper ceiling.

At the design stage, they decide what will be the method of connecting the parts. Several options are possible:

• welding;
• bolted connections;
• screws and nails (for wooden structures);
• using metal corners and plates.

It is necessary to choose the correct distance between shelves. The lower ones are made more spacious, since the heaviest things, which can be large, are most often placed on them. If there are no such items at the moment, they may appear in the future.

Next, determine the depth of the niches, which corresponds to the width of the shelves. Too narrow are impractical, too wide - inconvenient to use. Practice has shown that the optimal depth of niches is 50-60 cm. The length of the shelves is equal to the distance between the support posts

If the rack is wooden, it is important to prevent the boards from bending under load. In this regard, the optimal shelf length is 100-120 cm

Metal racks make them wider.

Measurements and markings

Not only the appearance of the finished product, but also its strength and reliability depends on how correctly the measurements are taken. Even small distortions can cause breakage and collapse of the structure - this applies to a greater extent to wooden shelving.

Measurements are taken using a tape measure. The length of the tape must be at least 5 meters. A laser level, through which the horizontal and vertical lines are found, will provide invaluable assistance. It is extremely necessary when performing markings.

On the walls and/or ceiling, use a marker to mark the location of the main elements of the future structure

This is especially important when installing stationary shelving. When manufacturing elements (shelves, support posts), be sure to check the markings made

What types of devices are there for storing wheels in the garage?

To improve storage conditions, various devices are used, which are metal and wooden structures with a large margin of safety. These can be shelves or racks for storing wheels in the garage, as well as hooks for hanging them on the wall.

Racks are mobile, stationary and rotating. They most often have a strong frame and the shape of a rectangular parallelepiped. Such stationary devices consist of five frames firmly fastened together. It is also necessary to have attachment points to the wall so that the entire structure does not tip over due to slight rocking. In the case of using hanging shelves, special attention should be paid to the hooks and brackets on which they will rest, because such storage space, together with the wheels, weighs quite a lot.

Small mobile rack Source pinterest.com

See also: Catalog of popular garage projects - from companies represented at the Low-Rise Country exhibition.

You can also use wheel hooks, which are metal pins on the wall designed to hold tires and wheels. Another good option is a wheel storage rack in the garage. Outwardly, it is very similar to a rack, but differs in that it can be moved throughout the entire area of ​​​​the room, while the rack is firmly attached to the wall. It can be in the form of a metal stand with a solid base, or it can look like a shelf with legs. Many private workshops produce such devices for a relatively low price.

Hooks in the wall for placing tires and wheels Source derevyannyy.com

Design features

Diagrams and design drawings for tire maintenance can satisfy any requirements of the car owner. It can be:

• racks and shelves of various configurations;
• hooks and stands;
• specialized cabinets in which you can create your own microclimate, ideal for keeping a particular set of tires in the garage.

Some of them are universal and suitable for any tire, others are highly specialized and designed for special conditions.

Racks and shelves

A rack for storing wheels in a garage gives the owner the following advantages:

• the ability to equip a rack with wheels with additional shelves designed for various tools;
• depending on the size of the garage and the amount of free space, the size and shape of the stand can be easily adjusted during assembly;
• the design has a large margin of safety at a relatively low cost.

Hooks and stands

Convenient devices for storing wheels in the garage, with the following advantages:

• easily and quickly made independently;
• take up little space and can be placed in any free corner of the garage;
• the stand, unlike a shelf or rack, can be easily moved from place to place and, in case of repair, it does not need to be dismantled or disassembled;
• materials for their manufacture are readily available and relatively cheap.

Note! Wheel hooks can be made as permanent brackets that attach to the wall, or as a removable piece that can be hung from a metal cable or rope, which is very convenient.

Specialized cabinets

If there is desire, time and money, the garage owner can equip the room with a special cabinet for storing wheels. Advantages of cabinets:

• the design does not spoil the appearance of the room;
• placed in any free space. It is not necessary to install it on the floor; you can make special fastenings and hang it on the wall;
• storing the wheels in a special cabinet will ensure that a jar of oil or other liquid that is in your garage will not accidentally be knocked over on them. This will significantly extend the life of the tires.

Manufacturing technology for a simple wheel rack

The structure must be strong to withstand the weight placed on it. And also, if it is wood, then it should be coated with antiseptics to protect against fungus, and if it is metal, then it should be painted to prevent corrosion. Most often, manufacturers make wheel racks in the garage from profiles using welding. For shelves, chipboard, thick plywood or fiberboard are used.

First, in any case, a sketch of the future product is created. All further work is based on this project, because it contains the necessary dimensions and dimensions, and it also indicates fastening points and types of fittings.

The design of the rack for wheels can be made independently Source 999.md

Comments

How to make the dimensions of turn signals on vases. how to easily make “American turn signals” with your own hands

I understand everything clearly. but this is not a bulletin board or a store for sale. write how you did it with detailed explanations, and at the end you can add a note that if you want to purchase, write to the mailbox or by mail.

If you don't fix it, I'll delete your post.

Login to reply

Login to reply

Well, there’s not much to tell the guys here, the “joker” pipe system and bars, but the price is really premium)))

Login to reply

We all remember the picture where wheels on rims cannot be stored vertically

Login to reply

Login to reply

We all remember the picture where wheels on rims cannot be stored vertically

Every motorist has to face the problem of storing a replacement set of wheels, depending on a particular season. The shape and size of tires require a convenient place, even for temporary placement. Purchasing a special rack will entail unforeseen expenses, and considerable ones. But making shelves for wheels with your own hands will solve this issue without resorting to big waste.

Video description

The video offers detailed instructions for installing a rack for storing car wheels:
Next, you need to make shelves, which can be made of wood or sheet materials. They should also be varnished to avoid the appearance of fungal diseases on their surface. Then straps are attached to prevent the wheels from rolling off from their storage locations. This completes the assembly of the wheel storage rack.

Such a device is quite inexpensive and can be purchased at a home improvement store or in a private workshop. Despite its simplicity, it is able to create optimal and very convenient conditions for storing tires and wheels.

Optimizing tires in the garage space - reliable, inexpensive, safe Source yandex.ru

Rational rules and ideas for storing tires on the balcony

The balcony can be used as a place for long-term storage of car tires, but this must be done correctly, taking into account the recommendations of experts.

Regardless of the time of year, they should be stored on the loggia only in an upright position. You should not hang them, otherwise they will begin to stretch and deform under their own weight. As a rule, this happens during the first weeks.

When storing tires on a balcony for a long time in winter, they should be rotated periodically (every 1–1.5 months) to change the point of support. Thanks to this procedure, you can avoid deformation of the side parts, the tread, and the appearance of imbalance.

You should never stack tires, that is, on top of each other, since the upper ones will put pressure on the lower ones, which will lead to deformation of the latter. This problem can be solved by periodically changing the sequence of rubber arrangement, but this is quite problematic.

If cracks, defects or stretches are found on the tires after summer or winter storage, you must seek advice from a specialist and find out whether further use of the rubber is possible. However, with a high degree of probability, it will no longer be possible to use such tires.

Tips for use

Any car enthusiast can assemble a wooden structure for storing rubber with his own hands. Especially if he is familiar with the work of a carpenter or knows how to use a hammer and saw. The cost of such a rack is much less than the factory one, and its assembly will take little time.

To learn how to make a rack for wheels with your own hands, see the following video.

How to store wheels: 5 best garage ideas

Reading time:

5 minutes

How long will the wheels last?

If all storage requirements are met, rubber will last about 10 years.
But if you store the wheels haphazardly, the service life of the tires will rapidly decrease to 5 years. This means that by taking care of organizing the storage location just once, over 10 years you will save
an amount equal to the cost of a full set of tires!

What are they made from?

As already mentioned, garage shelving is made of wood and metal. Wooden ones are lighter in weight, it is easier to work with wood, but they do not withstand such heavy loads. Metal ones are heavier (many times heavier), but you can lay an elephant on them.

One of the layout options

Lumber costs less than metal. But don’t think that the costs will be small: you will have to buy graded wood without knots, and this is the “elite” or “premium” class with a corresponding price tag. So it won't be very cheap.

Made of wood

Operating conditions in the garage are far from the best - high humidity, frost, alternating freezing/freezing, and sometimes heat. Not very good for wood. Therefore, all material must be treated with antibacterial and protective compounds before work. Use wood products for exterior use, as conditions in an unheated garage are more similar. You can choose a product that simultaneously tints the surface being treated and your product does not need to be painted. After processing, the materials are dried and only then work begins.

How to connect bars

When connecting parts of a wooden rack, you can use standard methods for carpenters - quarter-foot or half-foot. If this is difficult for you, you can also butt nail and use metal angles and/or overlay plates to reinforce the joints.

Another point: it is better to connect with nails, not with screws. The result is more stable and fewer connections become loose. If you choose the option with reinforcement with plates, they can be mounted with self-tapping screws.

Wooden garage rack

Now in terms of size: for racks they usually use 50*50 mm timber, for crossbars you can use the same timber or a little thinner - 50*30 mm. Flooring is made from:

• boards with a thickness of at least 21 mm;
• moisture-resistant plywood with a thickness of 10 mm;
• laminated chipboard;
• OSB.

The cheapest are boards and plywood. Laminated chipboard is much more expensive, but it does not need to be painted, which is a good plus. In order not to spend a lot, you can take the first and last sheets in a pack at the bases - they are scratched and are much cheaper.

Wooden shelving for the garage - drawing with dimensions

Another point: chipboard shelves have an open side cut. If it is not treated, as humidity increases, the chips will swell and the shelf will begin to warp. To prevent this from happening, coat the edges with silicone. With this treatment, nothing will happen to the chipboard.

Metal

If you decide to make metal shelving for the garage, the choice of materials is wider - there are two options for rolled metal, plus standard solutions for warehouses (perforated corners). You can also use metal parts intended for other purposes - for example, steel cable racks or cable channels that are used in communications are suitable.

Cable channels and shelves - convenient and not very expensive

So, what is the frame of a metal garage shelving made from:

• From a metal corner with a metal thickness of 3-4 mm. The width of the corner shelf is 25-45 cm, depending on the planned loads. Durable, but metal-intensive material, weighs a lot, and is expensive.
• Profile pipe (rectangular in cross-section). With less metal consumption (less wall thickness), compared to a metal corner, it has better elasticity characteristics (more difficult to bend), and is more resistant to torsion. Approximate dimensions for racks are 50*50 mm or 40*40 mm, for crossbars 50*25 mm or 40*25 mm, respectively.
• The racks are made from corrugated pipe, and the crossbars are made from angle iron. The thickness of the metal is 2-3 mm, the width of the shelf is 25 mm or more. Unfold the corner so that the laid flooring looks like it is in a “nest”.

Take a closer look at how the corners are positioned

The flooring on the shelves is made from the same materials as for a wooden rack (board, plywood, OSB, chipboard), only sometimes non-standard options are added, which are used with a wooden frame because of their high weight - sheet metal.

The board remains optimal for most regions - a reliable, not very expensive material. You need to take wood, without knots (with a minimum of knots) with a thickness of 21 mm. Treat with antiseptics, then paint.

The advantage of metal shelves is high reliability with a small thickness, the disadvantages are price, weight and “loudness”. They also need to be painted, but first clean them of rust, then go over them with a rust converter and primer, then paint them, preferably in two layers. Also, by the way, the metal frame must be processed. Then the rack in the garage will not rust.

Dimensions

Standard shelf dimensions for 4 rubber wheels:

The rack is installed from the wall surface at a distance of 10-20 centimeters - this is done so that the rubber does not touch the surface. Two parallel beams (metal or wood, it all depends on the material of manufacture) are mounted a meter from the floor - this is a shelf for tires. The upper and lower parts of the rack can be covered with any material - for example, wooden boards, plywood. These shelves are convenient for storing various tools or car parts. When installing the frame, you should remember that the wheels rest on the longitudinal beam during storage.

To prevent the tires from being deformed by the angle of the rack, it is installed so that the tire is in contact with a flat surface. Or a round metal profile is used as supports.