Robe with buttons. Simple DIY pattern for beginners: men's, women's, plush, velor, flannelette

The robe is a comfortable and cozy home garment that reflects the style of the housewife.

There are many styles and varieties for sewing it (with a wrap, with buttons, with a zipper, without seams), created on the basis of the general principles of pattern construction and sewing technology.

Even a housewife with no skills can sew a robe with her own hands in one day. To do this, just choose the right style, fabric and necessary accessories. Imagination and the desire to be unique will help you sew a dressing gown that emphasizes the attractiveness of the hostess.

Taking measurements

A pattern for a robe can be built on paper or you can rip out an old thing that fits well on the figure, then transfer all the contours to a paper sheet.

To build a template yourself, you need to take the following measurements:

Name	Reduction	How to measure
Bust	Og	Horizontally through the most convex places of the shoulder blades and chest, passing the area under the arms.
Hip circumference	About	Horizontally, capturing the most protruding parts of the hips and buttocks, taking into account the bulge of the abdomen.
Front length to waist	DPT	Vertically along the front, from the intersection of the shoulder and neck through the protruding areas to the waist.
Back length to waist	Dst	Similar to the previous point, only on the back.
Length from waist	Dot	From the rope tied at the waist down vertically.
The length of the sleeve	dr	From the protrusion of the shoulder cap along the arm through the bent elbow, to the point where the sleeve ends.

After taking measurements, you can choose the fabric.

Neck

Create a V-shaped neckline on the front shelves, and in order not to miss its length, take measurements on your figure. You need to measure the length of the neckline and the width of the neckline. Set aside the obtained neck width data on both shelves along the upper horizontal cut and make marks. Along the middle (vertical) cut from the top point of the shelf panels, set down the length of the cutout, connect the marks of the neck width with the depth of the cutout with an oblique line.

You can also make a concave line on the back of the robe to create a neckline. On top of the back panel, place the front shelves with the created cutout, make marks for the neck width. Remove the front part of the robe, fold the back in half, draw a quarter circle from the fold to the marks, and cut along the line. You will get a symmetrical neckline on the back. In general, a cutout at the back is not necessary for a housecoat.

Husband Wanted: A Single American Woman's Ad in a Newspaper, 1888

Nikolai Fomenko's secret daughter Darina forgave her father who abandoned her

Popularity, kindness, self-acceptance: how television affects children's development

Selection and calculation of fabric

A robe with buttons (the pattern will help you fit the garment perfectly on your figure) is made from different fabrics.

It could be:

bike;
velours;
plush;
flannel;
chintz;
waffle fabric;
calico;
microfiber;
atlas;
silk;
cotton;
mahra;
bamboo cloth.

Material consumption depends on the following parameters:

width of the material (varies from 90 to 170 cm);
personal parameters;
selected length;
product width.

Experts recommend first making a pattern, then laying it out on the floor or sheet and measuring the required amount of fabric. If the material does not have a pattern and its width is 150 cm, then one length is enough, plus the length of the sleeve and 20 cm for allowances. In the case of asymmetrical patterns, you will need to gain 1 more outfit length.

For example, if the distance of the future product from the bottom to the top is 100 cm, then you need to have 180 cm of fabric (100+60+20). If the width of the material is 170 cm, then take 20 cm less, and if 90 cm, then take 100 + 100 + 60 + 60 + 20 + 20 = 360 cm.

When calculating the material, human height is taken into account. Tall people will need more fabric than those of short and average height.

Fleece blankets

It's hard to imagine a home where blankets are not used. A soft, light, pleasant-to-touch blanket provides warmth and comfort. It’s so nice to wrap yourself in a blanket in the evening while sitting with a book or a cup of tea. The blanket will please you even more if it is made with your own hands. By the way, you can easily sew a fleece blanket according to our instructions together with your child. You don't even need a sewing machine. All you need is sharp scissors and a piece of fleece of suitable size, as well as a measuring tape and pins.

Bright, durable, lightweight, warm fleece is ideal for sewing a bedspread. In addition, this fabric is easy to work with, it is flexible, the edges of the fleece do not fray and do not require additional processing.

Let's start sewing a fleece blanket. We cut the material prepared for cutting into squares (20x20 cm).

We calculate the number of squares based on the desired size of the future blanket. Everything will depend on who you are sewing it for - for an adult or for a child.

Women's robe

The robe with buttons (the pattern is presented for size 54, height IV) is suitable for a plump woman. With a material width of 90 cm, 3.2 m will be required.

Dress sewing technology:

Sew raised seams on the shelves, iron them and sew them with a zigzag stitch.
Fold the front and back panels face to face, sew the edges along the shoulder, then zigzag them.
Sew the sides of the product, press the seams.
Prepare ready-made bias tape of a suitable shade and process the neckline, wrap and bottom of the robe.
Fold the sleeves in half, stitch the sides and sew them into the armhole. Fold the bottom of the sewn parts twice and stitch them.
Finish the upper part and the middle line of the pockets with a ruff and sew the parts together. Then, along all edges, except for the top border, turn 1 cm to the wrong side and sew the pockets to the shelf.
Mark the loops, trim them and sew on the fittings.
For the belt, cut out a rectangle from the material, the length of which is equal to the waist circumference + 1 m for ties; if desired, cut out even longer. The width of the workpiece should correspond to double the width of the belt + 2 cm for allowances.
The rectangular piece should be bent crosswise facing inward. Next, sew the short edges, then the long ones, leaving an opening in the middle for turning. Turn the belt inside out using a pencil, straighten the corners, sew up the hole with blind stitches by hand.
The model can be customized with ruffles or frills, or lace inserts.

how to sew a robe with your own hands quickly and without a pattern

If you decide to sew a robe with your own hands, it can be done very quickly and without an exact pattern. In this case, the pattern is built directly on the fabric. Having studied the master classes provided on the pages of our large handicraft encyclopedia https://pro100hobbi.ru you can find different styles of dressing gowns - both warm and light, with and without sleeves, with a wrap and with a zipper. Watch, study, try to sew a robe yourself. The result will definitely please you.

How to sew a robe without a pattern with your own hands

Sewing a robe without a pattern is very easy and won’t take long if you carefully watch the master class, which explains how to cut a robe yourself directly on the fabric. The work is not difficult and the result is very good) Watch, study and dare)

Bright housecoat without a pattern

It will only take a few hours to sew a wonderful bright robe. And the result will delight you with such beauty. After studying the master class, try to sew a dressing gown yourself without a pattern. You will definitely succeed.

Wraparound robe without pattern

Do you want to get something new for your home in just a few hours? Then take the fabric, study this clear master class and try to sew a robe from cotton fabric yourself without a pattern. You will definitely succeed. And the author of the article will help you cope with the work)

MK robe without pattern

In order to make a new dressing gown with your own hands, study a very detailed master class, which gives a complete description of sewing without constructing a preliminary pattern. The master class is very clear. Explore and create) The robe will turn out to be very comfortable and cute.

Robe with hood without pattern

If you decide to make yourself a dressing gown, and you have very little time, then you can sew it without a pattern by studying this detailed master class. The robe has a hood, so it is comfortable after a bath or shower. Watch the video and create)

Dress-robe in half an hour

A woman should always be beautiful, fashionable and very elegant, even at home. This master class will help you sew a wonderful robe dress without a preliminary pattern in just half an hour. Take fabric, needles and start working) You can even go to the store or for a walk in such a wonderful robe)

Zip robe without pattern

To sew a robe yourself, you can create a pattern directly on the fabric. The sewing work is simple and short, and the result will please you very much. Study the article and try to do all the work yourself. The robe with a zipper will be very cute)

Warm cozy robe without a pattern

How nice it is to return from work and plunge into a warm robe that you made with your own hands. You can sew a robe in just 30 minutes, without having a pattern. It will turn out beautiful and very cute. Study MK and create)

DIY robe without a pattern

Don’t rush to the store to buy a dressing gown if you have at least some sewing skills. This article will help you master the process of sewing a robe. A pattern for work is completely optional. The master class will tell you how to sew a robe. Watch and dare)

Summer robe without pattern

How nice it is to wear clothes that you sewed for yourself) In this video you can see how to sew a robe yourself without a pattern. Study, try to sew such a robe yourself.

Pattern for beginners. Robe.

Bathrobe. Expensive, comfortable and warm. How to sew? See here. This product is formed without a pattern, directly on the fabric. And we are told in detail how to do this.

Robe - kimano

We were lucky! We can see several patterns for sewing different styles of robe. We are presented with patterns for sewing a house dress - a wraparound robe, a terry robe with a hood, and so on. You will love these ideas.

Robe with sleeves quickly

Hello dears))) Let's sew a fleece robe with 3/4 sleeves. A very simple style and will not require much time to create a pattern, since there is no pattern at all. There are detailed photo instructions that will help you achieve your plans.

Sauna towel

How lucky we are. Now is a great opportunity to turn your bath towel into a masterpiece. After a bath, you no longer need to just wrap yourself in a towel. A new model “Sauna Towel” has appeared. It’s not difficult to do and it only takes an hour to work))))

Wraparound robe with sleeves

Girls, take note of this style. You can create a chic product with your own hands. No one forbade looking sexy in home paradise. In this outfit you need to meet your husband from work! If you sewed this yourself, then you were simply born to conquer men)))

How to sew a robe without a pattern

Simple and clear instructions on how to sew a robe without a pattern for beginner seamstresses.

Women's and children's dressing gowns

In this master class you will find step-by-step instructions on how to sew a homemade women's robe. This robe is suitable for any size, you can choose fabric of any color. The photo shows a very simple way to sew this wrap-around robe, without a pattern. We also present to your attention a master class for sewing a children's robe from terry towels. The size of the pattern is for a child aged 3-4 years. If you don't mind two bath towels for your baby, then get to work. The baby will be delighted with the bright and soft robe with a hood.

Male

To create a men's work robe with buttons, you will need the following materials:

simple pattern;
mixed or cotton fabric;
matching threads;
interlining;
6 flat buttons;
tools and sewing machine.

Procedure:

For the pattern, you can take an old men's shirt as a basis, rip it open or attach it to the fabric. The main thing is to choose the right size - the width of the front and back halves at the hip line should be 4-5 cm larger than your own half-circumference of the hips, and the shoulder section should be 1.5 cm longer.
In addition, you need to lengthen the robe to the desired size.
Fold the material in half with the front surface inward, lay out the pattern pieces on top, taking into account that the grain thread runs along the blanks, with the exception of the collar. Secure the paper with pins, trace and cut, having previously marked the seam allowances.
As a result, you need to prepare the following details:

Name	Quantity, children
Back	1
Shelf	2
Cuff
patch pocket
Half belt	1
Collar	2
Sleeve
Pick-up

Further:

Turn all sides of the pocket inside out and stitch the top line.
Process the half-belt and collar, pre-glued with non-woven fabric.
Sew pockets to the front halves, and baste the tab to the back along the waist line.
Stitch the shoulder sections, sew the collar and sleeve into the armhole. Next, sew the sleeve with a continuous seam, as well as the side lines connecting the back and front panels.
Finish the cuff and sew it to the bottom edge of the sleeve.
Sew the hems to the shelves, turn them to the wrong side and sweep them away.
Iron all seams and finish with an overlocker.
On the left front and cuffs, mark the loops and overcast them, then attach the fittings.
Finally, sew the item on a typewriter.

A warm, comfortable robe is easy to sew yourself. A simple way to blanket

A cozy robe made of soft fabric is a desirable purchase for most people; it is easy to buy at your local store. But as often happens, you have to refuse to purchase due to the fact that either the cost of a set of products for the whole family is too high, or the quality of the material from which the robes are made is far from the concepts of “warm and cozy.” Professional seamstresses solve this problem with their own hands, sewing the required number of robes of any model for all family members, and this is an excellent example to follow. Creating a robe is quite simple, you just need to follow the instructions and methodically follow the sequence of steps.

What you need

If you still doubt your skills, then do not rush to buy fabric; use any slightly tired blanket for a pilot product. In any case, the robe will turn out excellent, because creativity and passion for victory will be invested in its creation.

Tools and materials:

Terry blanket or fabric.
Sewing machine and overlocker (if possible).
Tailor's clips and a centimeter or tape measure.
Scissors.

Preparation

To accurately cut the fabric, you will need a template - choose your favorite robe, which will serve as the base product for creating a new item. Spread the blanket and fabric on a horizontal surface and place the template on top of it. Outline the silhouette of the back, two front shelves and sleeves.

The length of the sleeve may not coincide with the base product, but for home clothes, a length of ¾ is acceptable, that is, slightly below the elbow. If you need a full sleeve, combine the main fabric with the existing remnants of any material or use a terry towel, the result will be more interesting than the proposed model.

Children bathrobe

To create a warm robe for a 1.5 year old girl, you will need:

60 cm flannel or flannel (width 1.5 m);
a spool of thread of a suitable shade;
pieces of non-woven fabric;
5 small buttons.

Design method:

The product is based on any proven pattern (dress with shirt sleeves or a small shirt). You can take a suitable model from the Burda magazine.
Place the patterns on the material folded in half and trace along the contours. Next, add 1 cm for allowances.
Pin the parts together and cut them out with sharp scissors.
The result should be 2 pieces of front, sleeve, collar, as well as 1 solid back and belt.

Children's robe with buttons. Pattern.
Read also: Crown of Kanzashi: master classes on creating beautiful New Year’s accessories from experienced needlewomen
Glue the upper collar blank with non-woven material, cut off excess pieces of adhesive fiber.
Place both fragments of the collar face to face and secure with pins, then sharpen with a stitch, the width of which is 5-7 mm. It is advisable to cut off the allowances in the corners.
Turn out the parts, straighten them, fix the edge from the upper segment to the lower one and iron it. Sew along the ends and flaps. Then baste the collar along the edge of the stitching.
On the shelves, glue one-piece strips of 3 cm with non-woven material, then iron them inside out.
Stitch the shoulder sections of the front and back panels, press the seams.
Sew the collar into the neck, its ends should reach the middle of the slats, so that it is convenient to fasten the robe.
Sew sleeves into open armholes.
Stitch the side seams.
Hem the bottom of the product by first stitching the corners of the strip and turning them inside out.
Make a hem, then stitch the bottom edges of the sleeves.
For the belt, cut out an elongated rectangular piece, fold it in half lengthwise and iron it. Next, turn the piece inside out, pin it together and stitch it, leaving an opening for turning.
Turn the sewn belt inside out and iron it, and sew a finishing stitch around the perimeter.
Finish all internal seams with overlock or zigzag.
Finally, make loops on the bar and sew on the fittings.

Like Japanese beauties

Let's sew a kimono robe .

The kimono robe is sewn loose with wide sode sleeves, always with a belt, the width closer to the Japanese obi is 10-15 cm. The pattern is very simple, consisting of 6 parts:

One-piece back.
Left and right shelves.
Rectangular sleeves.
Two belt parts.

It is better to sew from silk, then you will look like a real oriental beauty.

The sewing procedure is the same as above, you just need to sew on the sleeves. Sew a rectangle, then sew it to the armhole.

Dear craftswomen, you will definitely learn to sew like a real professional if you open the video where Irina Paukshte gives lessons.

Bathrobe

A pattern for a bathrobe with buttons can be made from a terry sheet or waffle fabric. If the size of a terry bedspread is 180x130 cm, then in this case the hip circumference should not be more than 110 cm, otherwise the product will not fit in width. Layout of parts on the panel:

Procedure:

Fold the fabric crosswise and mark the central axial border.
From it in both directions set aside ¼ of the hip circumference parameter. According to the presented drawing, outline the length of the item, as well as the dimensions of the sleeve.
Cut the shoulder sections and armholes, then cut out 2 squares measuring 17x17 cm, they can be used for gussets or pockets. It is worth considering that there is no need to cut the fabric along the 16 cm line; this is the section connecting the hood with the robe.
Sew the sleeves into the armhole, then sew the shoulder and sleeve seams at the same time - they continue one another.
Sew the corners of the hood, then sew its lower edge to the neckline.
The floors and bottom of the product can be finished with a zigzag or edged with ribbon.
If you make a long robe, you will have to use terry cloth, because the sheet will not be enough.
The floodplain is ½ part of the width of the sleeve. Where the word “armhole” is indicated, a cut should be made.
On one side, mark and process the loops, and on the other, sew on the buttons.
Make a belt if desired.

How to sew a wrap robe with your own hands quickly and without a pattern

Good afternoon, dear readers!

Are you planning to sew a new robe? I offer you a simple, comfortable wrap pattern and tell you how to sew a robe with your own hands quickly and without a pattern.

For those who sew well and a lot, sewing any clothes, especially a robe, is not a problem.

This article will be useful to those who have the most basic sewing skills: they know how to hold a needle and thread and make a stitch on a sewing machine. First, let's think about how we dress at home? Tell us about it in the comments.

I think that a woman is a mother and a wife, and at home she should always remain a Woman with a capital W, respecting and loving both herself and her family members.

And at home you need to look charming, beautiful, neat, well-groomed, stylishly dressed. No washed-out robes or tracksuits, nightgowns or pajamas, especially! Preference should be given to comfortable and beautiful home clothes - trousers with a T-shirt, a skirt with a top and others.

But we still need a robe to throw on in the morning and sneak into the bathroom, from where we emerge looking like a princess!

And in the evening after taking a bath, women's dressing gowns will come in handy.

Let's try to sew a robe with our own hands.

With set-in sleeve

To sew a product, you need to prepare the fabric (waffle fabric, terry cloth, velor), take measurements and make a pattern. An approximate diagram for making a robe with set-in sleeves and a turn-down collar:

Technology for creating things:

Bend the material along the longitudinal line, then lay out the made template on it and remove the allowances.
Attach the back panel to the fold and cut it out as a single piece. Then form 2 shelves, sleeves and pockets, as well as 1 trim.
Place darts on the front panel.
Baste the side edges of the front and back halves, then stitch them.
Next, sew in the sleeves and stitch them along the open edge on the side, then fold the bottom of the part and make a machine seam.
Baste the binding, then sew it on by machine.
Tuck the edges of the pockets, place them on the shelf and stitch.
Mark the location of the loops, process them, sew on fittings

Applying measurements to fabric

Iron the material and trim off the excess, after which you can take measurements to create a drawing of the robe. If cutting occurs without patterns, then first you need to make a mark on the back.

Bathrobe for a child made from a towel

Attention! From the edge of the fabric, indicate the waist line; the value varies depending on the length of the robe.

Below is how to sew a simple robe without a pattern.

Bag robe with buttons

A robe with buttons (the pattern is available for beginning seamstresses) is created with a lowered armhole or without sleeves in the form of a bag. You will need summer fabric or light plush material. The pattern (on a scale of 1 to 4) is presented for size 46, the length of the item is 102 cm. With a fabric width of 1.5 m, you will need 1.3 m. You also need a ready-made roll of a suitable shade with a length of 2.2 m.

If you sew a baggy model with buttons, then on each front half you need to leave 3 cm for the side. During cutting, add 1 cm allowances along the side, shoulder seam and bottom. The neckline and armhole are trimmed with a ruff.

Sewing technology:

Sew shoulder seams, zigzag and iron to front.
Fold the roll in half and iron it, leaving one edge narrower by 1 mm. Apply the piping to the neckline, armhole and top of the pockets, then stitch.
Iron the side and bottom borders of the pockets to the wrong side by 1 cm, without using such manipulations with the side sewn into the seam. Sew the blanks along the marked lines, carefully securing the upper corner.
Sew the sides, trim with a zigzag stitch and iron back. Make fastenings at the top.
Finish the edges of the fastener and the bottom. Bend the bar 3 cm inward, then stitch, making fastenings at the bottom and top of the seam.
On the right shelf, mark the loops and decorate them.
Hem the bottom of the product with a hidden seam.
Sew buttons.

Cut a wrap robe without a pattern

I like the comfortable model of a women's wraparound robe, you can quickly wrap it up and tie it, no buttons break, no zipper gets stuck.

The proposed model, according to which I have already sewn 4 robes, but always different, does not even require a pattern!

You can use any material, but a soft fabric such as knitwear is best; such a chintz robe can add a little weight.

How much material will be needed

With a width of 150 cm, you need to take a length equal to the length of the robe, and with a width of 75-80 cm - twice as long.

The wraparound robe of the proposed model can be sewn in any size up to 52-54. For larger sizes you will need to make additional inserts.

Cut the robe

We fold the narrow fabric in half crosswise with the wrong side inward, and fold the wide fabric in half lengthwise with the wrong side inward.

If the fabric is wide, we sew the robe practically without seams, only shoulder seams will be, and if the fabric is narrow, you will need to make a straight seam on the back. In this case, we retreat 1.5 cm from the edge of the fabric on the left and draw a seam line.

Please note that the photo shows not a pattern, but a schematic representation of the cutting of the robe, the dimensions on it NOT life-size.

I will give an explanation of the cutting.

From the side of the future back (on the left) from top to bottom we retreat 1.5 cm for the seam and another 2 cm to mark the depth of the neck.

From left to right from top we measure 9 cm - the width of the neck.

Connect the marked points.

We calculate the width of the robe as follows: divide the hip circumference (HC) by 2 and add 20 cm.

For example, OB=110cm, calculation: 110/2 +20 = 75.

We measure from left to right the width of the robe - 75 cm. For sizes from 48 to 54 this will be almost equal to the width of the material. For smaller sizes, cut off the excess fabric on the right.

How to sew without creating a pattern

The product can be sewn in 1 hour without a pattern.

Step-by-step creation method:

Fold the fabric face inward and place a long, loose-fitting T-shirt on top. Pin it to the base with pins.
Add 1.5 cm along the contour to process the seams.
Also bend the free piece of fabric with the right side inward and attach the T-shirt from the side of the shelf, where the cutout is deeper, while leaving 3 cm in the middle for the button placket.
From the remnants of the fabric, cut 2 lines equal to the length of the front panel for the hem.
To trim the neckline, cut out pieces from non-woven fabric 5 cm high, repeating the shape of the neckline, and glue them.
Sew the back and front along the side and shoulder edges.
Use a centimeter to measure the circumference of the armhole. Then build the sleeve. To do this, put down a segment that is equal to Dpr/3-5 cm. Draw a horizontal line from the resulting bottom point. From the top mark to the intersection with the drawn line, draw segments on 2 sides that are equal to Dpr/2, you get a triangle. Divide the left side into equal parts, set aside 1.5 cm upward. Divide the right side in the same way, then divide in half again. From the upper dividing point, place a perpendicular upward, 1 cm high. From the bottom line, measure down 0.5 cm. Draw an okat for all marked points. From the highest position down, draw a line equal to the length of the part, and then draw it completely. If desired, the workpiece can be narrowed at the bottom.
Sew the sleeve into the product and sew the side sections.
Finish the placket with a trim and trim the neckline with bias tape.
Hem the bottom and edges of the sleeves, sew on buttons.
Cut pockets of any shape, fold the top 2-3 cm and hem the fold.
Attach the pockets to the shelves of the robe, bend all the edges by 1 cm and stitch the details.
Finally, iron all seams and finish the inner edges with a zigzag stitch.

Even novice needlewomen can sew a cozy robe with buttons without a pattern. Simple models and a step-by-step description of sewing technology will help you use high-quality fabric to create a product suitable for comfortable home wear.

Requirements for home clothes

Unlike the gowns worn by doctors and nurses, when choosing home clothes, they are usually guided by the following wishes:

I would like convenience and practicality.
The preferred materials for manufacturing are natural.
Choose light home clothes according to your tastes.
It is desirable that a variety of options be provided.

Women's robe
An important role is played by the fact that it should be suitable in a situation where you have to meet unexpected guests. There are various styles that are suitable for any age: both a young girl and an old grandfather.

Sewing the product

The simplest version of a robe is sewing without using sleeves. You need to make the top seams between the back and front. Instead of buttons, you can sew a regular knitted belt.

The base of the product is a simple rectangle. The width will be equal to the circumference of the hips plus 9 cm. For the smell you need to leave 20 cm, the length of the robe can be different.

The height of the barrel will be approximately 18 cm. This value is selected at will, as well as the depth of the neck. Step-by-step sewing process:

Tools for work

Process the sleeve armholes using an overlocker;
sew the front and back of the product;
process the edges of the product manually;
if it is necessary to make an invisible fastener, then it should be located at the waist line;
Treat the front and neck with finishing fabric;
fold the hem and iron it.

You can also make a robe from a plaid without sewing, in which case you don’t even have to buy material. You can take some old bedspread with an interesting pattern.