How to make a crossbow from clothespins. How to make a match gun from a wooden clothespin

You don’t have to be afraid to make a match shooter for your child, because making any craft together is a great time, and a finished match shooter will be no more dangerous than a store-bought gun that shoots plastic or rubber bullets, because matches in this case are not used for their intended purpose and they can be used remove the sulfur head. A match shooter can be made from a variety of available tools and materials, but in this case we’ll make it from a clothespin.

TO MAKE A MATCH SHOOT FROM A CLOTHESPENG YOU WILL NEED:

=>Knife, =>Clothespin, =>Narrow tape or spool of thread.

SELECTION OF CLOTHESPENS FOR MAKING A MATCHSHOOTER

Not every clothespin is suitable for making a match shooter, and it doesn’t really matter whether it’s plastic or wooden. It is important to take a clothespin for a match fire that has a specific design. Clothespins with a spring inside used as a spacer and something similar will not work.

For a match shooter of this option, you need to use a clothespin with a spring that does not expand from the inside, but presses the part of the clothespin from the outside. Such a spring will be used as a trigger and a mechanism for pushing the match out of the match shooter.

Checking for “combat readiness”

When asking how to make a scarecrow, you should take into account that this device must be ready to fire. That is, it is necessary to carry out verification. To do this you need to do the following:

Pull the top forward. Until the protrusion of the spring is in the factory groove on its surface. When you achieve this, then pull this part back. Until the protrusion of the clothespin is in the groove you made at the bottom of the match shooter.
Then select a projectile and load it by lifting the top part of this device. In this case, regular matches or metal clips are ideal.
After this, pull back the spring so that the trigger bar is released. This will result in a shot. That is, the device works.

MAKING A MATCH SHOT FROM A CLOTHESPENG

After we have found a suitable clothespin for the match shooter, we will begin making it.

1. Let's disassemble our clothespin into parts, into a spring and two blanks.

2. On the outside of one part of the clothespin, cut a groove with a knife or other sharp cutting tool.

3. In the other part of the clothespin we make exactly the same cutout and now you can connect both elements of the match shooter and see how it will look.

5. Now we have to select one of the blanks for making two more cuts, for which the spring from the shooting clothespin will be attached. We make outer and inner transverse cuts and move on to the sixth stage of making a match shooter.

6. At this stage, along one of the parts of the workpiece, we cut a channel for loading and firing the match shooter with matches.

7. In another workpiece we make exactly the same channel.

9. At this stage of work, using tape or thread, we fasten both blanks and get a ready-made match shooter, but without the hammer and trigger mechanism.

10. In order for our match shooter to fire a shot, we will equip it with a spring that was pulled out of the clothespin at the very beginning.

12. Stretch the spring and secure its edges into the previously cut transverse notches. We insert a match and you can shoot from a match shooter.

13.After pressing the trigger, the inner part of the spring will pop out of the recess and push the match out of the match shooter.

In order for a match shooter from a clothespin to fire again, we tension the spring, load it with a match and pull the trigger.

Every grown man was once a child. And the greatest entertainment in those happy times of childhood was playing with friends in the yard. It doesn't matter what the game is, the main thing is to play. What did you play most often? Of course, there were skirmishes, war, partisans and much more - it’s impossible to list everything. And if there was an opportunity to shoot from something, then this was the ultimate dream of any boy! Slingshots, crossbows and other delights of the boys’ world simply excited the imagination. And if you blow something up all over the yard, then that’s the height of bliss! What if it is possible to shoot burning matches at a decent distance? It was, as they say now, “The Hit of the Season”! We will tell you about one of the types of boyish fun. It's called a scarecrow.

A scarecrow is a device that produces noise. The main purpose of its creation is to scare someone. In general, a scarecrow is considered to be a children's toy in the shape of a pistol, which, when used with caps, makes a loud popping sound. But there are also so-called “adult” scarecrows - blank cartridges, for example.

However, there are also many ways to make a scarecrow at home. What can this product be made from:

from a copper tube and a piece of plywood;
from clothespins;
from a metal tube;
from a bicycle spoke;
of two bolts and a nut;
from dowels, etc.

The clothespin scarecrow, or, as it is also called, “Matchshooter,” was invented a very long time ago, when the Soviet Union still existed. A whole era of children was amused by this type of “weapon” when they played war with friends in the yard. The design is so simple, and the materials for its manufacture were so accessible to everyone that only the lazy or those who had never heard anything about it made a scarecrow from a clothespin. Compactness, ease of use and reliability have made the device very popular. Another feature is that it could fire both regular and incendiary shells.

Nowadays, the clothespin scarecrow is no longer popular. One of the main reasons is that in Soviet times, clothespins were made of wood with a weak spring, but now they are made of plastic. Another important factor: now children have so much entertainment (the Internet, games, movies) that they are not even interested in doing something with their own hands. And with the development of the Internet and social networks, you rarely see school-age children playing something in the yard.

However, there are still enthusiasts! It is for them that we wrote this article, in which we will tell you in detail how to make a scarecrow from a clothespin with your own hands. So let's get started.

Now let's move on directly to the description of what needs to be done to create this miracle weapon.

First stage

Disassemble the clothespin into three parts - you should have two wooden bases and a spring.

Second phase

Using a penknife, you need to process both halves of the clothespin base, which is not at all difficult. First, cut out a gutter on one of the wooden bases. Take your time, otherwise you might cut your fingers! Then divide the other half into two parts.

Third stage

Now carefully pull the spring back towards the groove so that its protrusion fits exactly into the groove. Then you need to attach the short part to the long one. To avoid mistakes, you should focus on the factory chute. The final stage: when everything fits as it should, you need to fasten all the parts with an elastic band. All is ready! As you can see, making a scarecrow is not at all difficult!

The next thing we absolutely must do is test our creation. This is the most enjoyable stage, isn't it?

Origami weapons

Origami makes it possible to make various crafts without glue or scissors.

A little lower, we will tell you how to make a gun out of paper that, although it doesn’t shoot, your child will definitely like. Making a toy gun from paper:

We take multi-colored material in A4 format as a basis;

(Step 1)
fold the sheet exactly in half;
fold the resulting two halves 4 times each;

(Step 2)
receive the parts, wrap them and insert them into each other.

By spending a few minutes constructing a gun, you will do something nice for your baby. The only thing missing for the resulting pistol is a paper knife, and you can learn how to make it from the previous article. But these are not all the options for pistols; there are much more interesting methods of manufacturing, but they will take more time.

Checking the product

To do this, perform the following steps:

1. Pull the upper part forward until the spring ends up with its protrusion in the factory groove. Once you have done this, you must pull this part back until the protrusion of the clothespin is in the groove that you made.
2. Now you must select a projectile and load it. This is easy to do: slightly lift the top part. Matches or paper clips are best used as projectiles in this case.
3. Then we pull back the spring until the trigger bar is released. After this there should be a shot. If so, hooray! You did everything right!

Paper Glock

If your child is in school and comes home after school and says he wants a cool gun, you can offer him to make a toy out of paper. For production you will need:

a set of colored paper;
rubber;
tape or glue;
scissors;
simple pencil.

How to make a paper gun video and step-by-step instructions:

The process begins with the production of eight tubes. They are made using a pencil, on which you need to wrap paper and secure the workpiece with tape or glue. This way the blanks will not fall apart.
We take four manufactured tubes. We fix the barrel with tape.
Now we take four more tubes. They need to be cut into parts.
We take three short tubes, make a cut on the barrel and install them in their place. Now we strengthen the handle with colored paper and fix the workpiece with glue.
Next we make the grenade launcher, sight and trigger. To do this, you need to cut a piece of eight centimeters, three centimeters and six centimeters from the tubes. We attach these segments to the main workpiece.
We make cuts to tighten the elastic, decorate the workpiece with emblems that can be drawn and cut out of colored paper. Our gun is all ready.

If the product was made by a child, now he can brag to his friends that he made the craft himself.

What to do if the device does not work?

The reason may be that the second part of the spring is not held in place. What should be done? It is necessary to deepen the groove in which the spring is held.

You won't believe it, but even such a simple device can be upgraded! Yes, yes, don't be surprised. Now we'll tell you how.

We glue a strip to the bottom of the scarecrow, which we cut out of a matchbox. We cut out a fragment where there is sulfur for lighting matches. As a result of this improvement, the match will light up at the moment of firing.

Miniature pistol made from matches and paper

Paper and matches will make a wonderful miniature revolver. The design also includes an elastic band. Although constructing such a pistol takes a lot of time, the result is well worth it.

Materials and tools:

matches;
rubber;
threads;
glue or tape;
paper and scissors.

Let's get to work. Making a revolver:

We take a match, wrap it in paper and get a small tube. To prevent the workpiece from falling apart, we fasten it with glue or tape. As a result, we made the barrel of our weapon.
Now we fix the elastic band on the tip of the match. We use threads for fixation. For reliable fastening, bend the edge of the elastic band and wrap the connection again with thread.
Next, we need to place the match in a paper tube and secure the rubber band to the paper. For this fastening we use tape. Now we bend the elastic again and fix the workpiece with tape again. If there are any extra pieces, cut them off. And as a result we get a reliable trigger mechanism.
Now, using a small piece of paper, we construct a handle for our revolver. We glue a match onto the finished handle, make a sight and glue all the parts together.

The craft is ready, all that remains is to test it. Plastic cups can be used as targets.

We figured out how to make a shooting gun out of paper, now we’ll tell you how to use it.

How the craft works:

place a match in a paper tube;
pull back the trigger mechanism;
releasing the rubber band, the match pushes the charge towards the target.

If you want to make the shot more realistic, you need to light a match before firing, but in this case you need to be careful not to provoke a fire.

You can also try making a paper sword

Safety precautions for use

Since the scarecrow's projectile can have a range of up to five meters, never use it at home or in other areas. You should also not aim at other people, children or animals. Also keep the crossbow away from flammable objects. It is highly advisable to wear goggles to protect your eyes when using burning projectiles; caution is a good idea. Happy using!

TO MAKE A MATCH SHOOT FROM A CLOTHESPENG YOU WILL NEED:

=>Knife, =>Clothespin, =>Narrow tape or spool of thread.

Modernization of the device

In the future, you can improve your scarecrow. To do this, you need to glue a fragment of a matchbox with sulfur on it to its lower part. It's not hard to do. After this upgrade, matches will light up when fired. This will add additional efficiency to this device. Also, part of the matchbox can be completely replaced with a piece of sandpaper. However, in this case you will have to insert the matches into the scarecrow backwards. It won't be very convenient. This problem is much easier to solve by lighting a match before firing. In this case, you should not neglect the danger posed by burning shells. Never use them indoors, do not shoot at flammable objects, and it is advisable to wear them while doing so. And of course, never aim at people or animals. The match shooter is capable of shooting at a distance of up to five meters, and sometimes even further.

SELECTION OF CLOTHESPENS FOR MAKING A MATCHSHOOTER

MAKING A MATCH SHOT FROM A CLOTHESPENG

After we have found a suitable clothespin for the match shooter, we will begin making it.

1. Let's disassemble our clothespin into parts, into a spring and two blanks.

2. On the outside of one part of the clothespin, cut a groove with a knife or other sharp cutting tool.

3. In the other part of the clothespin we make exactly the same cutout and now you can connect both elements of the match shooter and see how it will look.

6. At this stage, along one of the parts of the workpiece, we cut a channel for loading and firing the match shooter with matches.

7. In another workpiece we make exactly the same channel.

9. At this stage of work, using tape or thread, we fasten both blanks and get a ready-made match shooter, but without the hammer and trigger mechanism.

10. In order for our match shooter to fire a shot, we will equip it with a spring that was pulled out of the clothespin at the very beginning.

12. Stretch the spring and secure its edges into the previously cut transverse notches. We insert a match and you can shoot from a match shooter.

13.After pressing the trigger, the inner part of the spring will pop out of the recess and push the match out of the match shooter.

In order for a match shooter from a clothespin to fire again, we tension the spring, load it with a match and pull the trigger.

Fast pistol production

If you have already become familiar with various paper toys, for example the paper crane we talked about earlier, you can move on to serious “male” crafts.

How to make a gun out of paper in the fastest way? What makes this craft different is that it can shoot rubber bands. We will need:

Several album sheets;
Glue and tape;
Scissors.

Manufacturing process:

Design of the barrel and handle. We take a sheet of paper, roll it into a tube, and get something like a barrel. Now we fold a sheet of paper so that a handle with part of the barrel is formed.
Now we make a winding from a white sheet of paper, trim a little of the colored paper and glue the parts together. Next, take a wooden stick, wind paper onto it and connect the resulting tube to the barrel.
Let's start making the trigger. Without this small element, our weapon will not be able to fire. To make a trigger, you need to make a cut on the barrel and insert an elastic band there. This rubber band is stretched and clings to an element that is located on the handle; when the trigger begins to move upward, it moves the rubber band up, as a result it becomes detached from the handle and flies out.

The construction of a simple version is completed. To learn in detail how to make a gun out of paper, it is advisable to watch the video before starting production.

Download a video and cut an mp3 - we make it easy!

Our website is a great tool for entertainment and relaxation! You can always view and download online videos, funny videos, hidden camera videos, feature films, documentaries, amateur and home videos, music videos, videos about football, sports, accidents and disasters, humor, music, cartoons, anime, TV series and many other videos are completely free and without registration. Convert this video to mp3 and other formats: mp3, aac, m4a, ogg, wma, mp4, 3gp, avi, flv, mpg and wmv. Online Radio is a selection of radio stations by country, style and quality. Online Jokes are popular jokes to choose from by style. Cutting mp3 into ringtones online. Video converter to mp3 and other formats. Online Television - these are popular TV channels to choose from. TV channels are broadcast absolutely free in real time - broadcast online.

In this tutorial, we'll take a boring clothespin and transform it into a powerful match shooter for matches and toothpicks, capable of sticking them into apples and dartboards.